Planex Communications BT-HP02AD-DX Bluetooth Headphone adapter touch sensor User Manual BS 720 touch
Planex Communications inc. Bluetooth Headphone adapter touch sensor BS 720 touch
Users Manual
Bluetooth Stereo Headset
User Manual
BS-720-T
Specification of the Headset
Bluetooth Standard
Talk time
play time
Standby time
Charging time
Supported Bluetooth profiles
Operating temperature range
Storage temperature
Operation range
Power Supply
Over 5 .
Over 4 .
Over 7 day
Within 90~120 Mins.
10 meters(open space)
A2DP/AVRCP/Handsfree / Headset .
Bluetooth V2.1
hrs
hrs
s.
0 ~ 55 'C
0% ~ 90% (non-concrete status)
5V DC, 00~240V AC adapter
2. Introduction of the product
Power
Earphone Jack / Charging Port.
Earphone
LED
MFB
(Multi-
Function
Button)
Mic
-Next track
-Volume up
Touch
panel -Previous track
-Volume down
1. Charging the Headset
When charging, turn off the headset first.
At least for 4 hours when first time charging.
When charging, the red light on.
ully charged the red light will be off.F
AC Adapter
(optional)
off
USB cable
5. Pairing with your mobile phone
It need to pair with your Bluetooth device, first time.
4. "BS-720” will show on certain items in your mobile phone.
5. Key in pairing pin code "0000”press " yes" , the indicator
light will turn from the blue/red flashing status into blue
flashing, it means the pairing has been successful.
6.Now the headset has been in the "connected mode".
you may using your headset now.
10cm~1m
The pairing
distance Devices found
BS-720
1.Turn on the headset.
2.Press the MFB key for at least
7 sec; the blue and red light
flashing alternately it means the
headset is in the “pairing mode".
3.Please ensure that your mobile
phone is provided the Bluetooth
Function, and activate the function.
(detail please check up with your
mobile phone user's manual.)
- Stand-by mode--
blue light flash once every 5 Sec.
- C
blue light flash twice every 5 Sec.
- Active call mode--
blue light flash three times every 5 Sec.
- Playing music–
blue light fade out every 5 Sec.
- low battery--
red light flash.
onnected mode--
light indicator
light indicator
Blue Red
"0000”
on off
Press 7sec
on
3. How to wear the headset
20~25cm Mic
Operation range
10 meters(open space)
7. Make a call.
To make a call, dial through your mobile phone.
8. Answer a call when listening music.
When a call comes in, you will hear the ring tone from the
earphone. music will pause automatically.. Tap the touch panel .
9. End a call.
When you finish a call; double tap the touch panel.
You can also wait until the other finishes the call .
music will
resume automatically ..
Double-Tap
Ringing....
Tap
1.Plug the earphone into the headset.
2.Put the earphone in your ear.
3.Clip the headset on your clothes.
4.Keep 20~25cm from Mic to jaw for the best result.
785 .
Microphone
toward jaw
Mic
4. Turn on/ Turn off
1.Turn on - blue light flashing.
2.Turn off - red light flashing then off.
6. Listening to music.
Your mobile phone need supports A2DP and AVRCP Profile.
(Some phones may require you to start a media play first.)
Stop the music.
When you listen music
...Click the MFB.
Click
Play the music.
The headset should be
under "Connected mode".
...Click the MFB.
Click
Click Click Click Press
continuously.
Press
continuously.
Press
continuously.
Next or previous track.
When you listen music
...press the “+” or “-”.
Adjusting volume.
When you listen music
...Click the “+” or “-”.
Answer a second call . end current call and answer the
incoming call. .. Tap the touch panel .
10. Reject a call.
When you hear the in-coming call rings from your earphone;
, -------Reject a call.
double tap the touch panel.
If playing music it will pause and resume automatically .
16. Reset the headset.
Plug the power jack, charging the headset.
Other application
Connect with other Bluetooth device, Call & music everywhere.
11. Voice dialing
1.The headset should be under
"Connected mode", press the MFB
1.5 sec then you can make the
" Voice dialing " by the mobile
phone's operation instruction..
Press 1.5 sec
Press
1.5 sec
14. Mute & un-mute microphone
1.When during call press the “ "
key for 1.5 Sec; you will hear a “Beep “
sound, then your voice won't be heard.
2.When in the mute mode; you will hear the
" Do Do " sound from time to time.
3.Click the “ ”or “ ” key again,
to un-mute the microphone.
Press 1.5 sec
Double-Click
1.The headset should be under
"Connected mode". By double-click
the MFB , after you hear a " Do-
Do " sound from the headset, then it
will redial again.
2.The headset can work function 11,12
if your mobile phone support.
13.Call Diverts(audio transfer)
During a call, press MFB key 1.5 Sec to divert the call back
to your mobile phone.
12. Redial last number
Listen to the music from speaker.
1.You can connect BS-720 by 3.5mm plug input from speaker, play the music from the mobile,
and listen to the music by speaker.
2.The plug of the speaker must be 3.5mm.
In
Ringing....
Double-Tap
1.If your PC or NB or E-book with Bluetooth , then you can use the headset to listen to
music or make internet call on Skype/MSN/Yahoo messenger.
2.Please activate your Bluetooth software first and refer to pairing step 5 to pair the headset
with your Bluetooth devices. For the details of operation, please refer to the user guide of
the Bluetooth software installed on your PC or NB....
3.You can connect the BS-720 with your favorite headphone, to become a cordless headphone.
4.The plug of headphone must be 3.5mm.
5.The play time depends on the output power of the headphone.
A2DP/AVRCP
Stereo Music
HSP/HFP
Voice
10 meters(open space)
PCPC
NBNB
E-BookE-Book
Plug your favorite headphone
15. Clear paried devices.
The headset should be under "stand by mode",
press + & - ,s
imultaneously 7 sec.
Press 7 sec
simultaneously
A2DP/AVRCP
Stereo Music
10 meters(open space)
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the
following measures:
. Reorient or relocate the receiving antenna.
. Increase the separation between the equipment and receiver.
. Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
. Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, any changes or modifications not
expressly approved by the party responsible for compliance could void the user's
authority to operate this equipment. (Example - use only shielded interface cables
when connecting to computer or peripheral devices).
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.