Planex Communications CS-W02G2 IEEE 802.11b/g Wireless IP Network Camera User Manual CS W02G2 Manual V1 0 0 ENG

Planex Communications inc. IEEE 802.11b/g Wireless IP Network Camera CS W02G2 Manual V1 0 0 ENG

Manual

IEEE 802.11b/g Wireless IP Network Camera Model: CS-W02G2 User’s Manual
2Foreword Explanation of the signals In order to let you set up and use this product correctly, please pay attention when reading or browsing the manual as you see these signals listed below. Warning/ Danger Users should read the explanation carefully and understand it completely, otherwise users might be in danger or even be injured. Caution/ Be Careful Remind users to be careful when setting up the product and to avoid damaging the product or its system programs. Seeking for service or searching for an agent or a distributor Thank you for purchasing products from Planex Communications Inc. If you have any operational problems while configuring or setting up the product, you may contact with our Customer Service Department or ask the agent or the distributor from which you bought the product for help. Moreover, during warranty, if you find any defect or breakdown of the product, you may bring the product, assembly, and its warranty card to our company or to where you bought the product to ask for repair. ★ Every product has different warranty period and contract; please refer to our company for further information or consult the agent or the distributor. Planex Communications Inc. Support Phone：+65-6338-1704 (Singapore) +886-2-8218-7114 or +886-2-2219-7454 (Taiwan) Customer Service E-Mail：techsupport@planex.com.tw Contact Us Tel：+886-2-2219-1816 Fax：+886-2-2219-0655 Agents & Distributors：http://www.planex.net/where/index.htm
3FCC Certifications Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. CE Mark Warning Trademarks: All trade names and trademarks are the properties of their respective companies. Copyright©2006, All Rights Reserved.
4Table of Contents FCC Certifications....................................................................................................................................3 Package Contents....................................................................................................................................5 Key Features .....................................................................................................................................6 Physical Description.......................................................................................................................7 LED Indicators..................................................................................................................................7 System Requirements...................................................................................................................7 Installation.................................................................................................................................................8 Hardware Installation....................................................................................................................8 Software Installation....................................................................................................................10 Enabling Active X..................................................................................................................10 PC Cam Driver and Java Environment Installation..................................................12 Using IP Camera with MSN messenger................................................................................15 Using IP Camera with Skype....................................................................................................18 Using IP Camera with Yahoo! Messenger............................................................................21 Using IP Camera with Windows Movie Maker....................................................................27 System Definitions................................................................................................................................32 Login Window .................................................................................................................................32 View Window...................................................................................................................................33 System ..............................................................................................................................................34 Camera......................................................................................................................................34 User............................................................................................................................................35 NTP .............................................................................................................................................35 Motion Detection ...................................................................................................................36 DDNS .........................................................................................................................................36 Network.............................................................................................................................................38 LAN Settings............................................................................................................................38 Wireless LAN Settings.........................................................................................................39 Update...............................................................................................................................................39 Technical Specification........................................................................................................................40
5Package Contents 1. CS-W02G2 x1 2. 2dBi Antenna x1 3. Quick Installation Guide x1 4. CD-ROM(User’s Manual/Driver & Utility) x1 5. UTP Cable x1 6. Camera Mounting Bracket (Circular Foundation x1, Sustaining Pole x1, Universal Joint x1, Screwx3, Plastic Bolt x3) 7. AC Adapter x1 8. Warranty Card x1
6Overview The CS-W02G2 wireless/wired network camera is a compact-size, easy-to-use and cost-effective solution ideal for home security and entertainment. With 1.3M pixel CMOS sensor technology, CS-W02G2 provides excellent image quality with digital pan/tilt/zoom monitoring capability. CS-W02G2 comes with a built-in web server that can be viewed via a standard browser such like Internet Explorer or Netscape browser. Snapshots and recording can be taken directly from the web interface, stored within or without PC (via optional built-in 512MB~2GB NAND flash storage). Wired and wireless connections are both supported, which enables easy and clear camera installation. Providing a better way for baby or pet monitoring and video sharing, CS-W02G2 IP Camera uniquely features instant messenger interface, turning network camera into a convenient PC camera. CS-W02G2 is breaking the rule that conventional network camera follows. Key Features  Stand-alone network camera, no need to attach to PC  Motion JPEG compression engine  Built-in web server for monitoring via standard browser  Local access through Ethernet and 802.11 b/g wireless LAN (CS-W02G2)，remote access through Internet  15 levels motion detection  Digital pan/tilt/zoom  Support instant messenger video communication (MSN, Skype, Yahoo! Messenger)  Support Windows Movie Maker, recording as *.wmv file (VC-1 encoding, better compression rate than MPEG-4)
7Physical Description Physical description - front Physical description - rear AntennaLens and manual focus ringPower indicatorLAN indicator Reset buttonRJ-45 LAN connectorPower connector LED Indicators LED Color Description Power Green System ready LAN Green LAN ready LAN Red WLAN ready System Requirements The system requires an Ethernet port and an IP address. To view the IP camera images, each computer requires:  Microsoft Windows 98, ME, NT4.0, 2000, XP or 2003. Mac or Linux based machine.  Microsoft Internet Explorer 5.x, or later.  Mozilla FireFox 1.5.0.7 or later To use instant messenger with IP camera, each computer requires:  MSN messenger 7.5 or later  Skype 2.5.1.137 or later  Yahoo! Messenger 7.5 or later To use Windows Movie Maker, each computer requires:  Microsoft Windows XP SP2 or later
8Installation Hardware Installation 1. Assemble the stand Assemble the stand and fix it to the camera as shown. Use the three screws and plugs provided to fix the stand bracket to a wall, or other convenientfixing point. The stand can be adjusted to allow the camera afull 360º of rotation and a pan and tilt action. Warning: The camera is not waterproof and should not bemounted outside or in a position where it couldbecome wet.
92. Connect to a network hub/router 3. Power on 4. Check status Note both two green lights should turn on
10Software Installation Enabling Active X Your browser must have Active X enabled to connect to the IP camera. To enable Active X on your browser: 1. Open your internet browser. 2. Click on the tool bar at the top of the screen and select “Tools”→“Internet Options...”
113. Select “Security” tab from the internet options menu. 4. Click “Custom Level” button and enable all the Active X features in the list and then choose “Medium” level from the “Reset to” list.
12PC Cam Driver and Java Environment Installation 1. Run setup program from software CD Press “OK” to continue setup. If your system has not been installed of Java Run-time Environment, the setup program will install it first and then back to following steps. 2. Click “Next” 3. Click “Next”
134. Click “Install” 5. Click the check box to launch the network search tool and then click “Finish” 6. Double click on one of the listed item which you want to use to open web browser window
147. Login in as “admin”. The default password is “0000”. 8. Use focus ring to manually adjust the frame to the intended focus.
15Using IP Camera with MSN messenger Open MSN, select “Tools” and then “Audio and Video setup…” Click “Next”.
16Click next to “Step 3: Webcam Setup”. Scroll down the list and select “Network Camera” and then click “Finish”. The default screen is blank. Click “Options…” to search the IP Camera.
17Select the IP Camera which you want to use and then click “OK”. If the screen successfully reflects the viewing image of the IP camera, click “Finish”.
18Using IP Camera with Skype Open Skype, select “Tools” and click “Options…”. Select “Video (Beta)” tab and scroll down the list to select “Network Camera”. Click “Test Webcam”.
19Click “Webcam Settings”. Select the IP Camera which you want to use and then click “OK”.
20Click “Close”.
21Using IP Camera with Yahoo! Messenger In Yahoo! Messenger, select “Messenger” and click “My Webcam”.
22Click “OK”. Select “File” and click “Preferences”.
23Select “Webcam” on the menu and click “Camera Source…”. Scroll down the list and select “Network Camera” and click “OK”.
24Click “Camera Settings…”.
25Select the IP Camera which you want to use and click “OK”. Click “OK” to finish.
26If successfully setting up CS-W02G2, My Webcam screen will show video from CS-W02G2.
27Using IP Camera with Windows Movie Maker Launch Windows Movie Maker from “Start”→“Programs”→“Accessories”. (Note: Windows Movie Maker is available for Windows XP SP2 or later)
28Select “capture from video device”. Select “Network Camera” and click “Configure…”.
29Click “Camera Settings”. Select the IP Camera which you want to use and then click “OK”.
30Click “Next”. Click “Next”.
31 Click “Start Capture” to start recording, “Stop Capture” to stop, and “Finish” when finished.
32System Definitions Login Window Auto: detected automatically ActiveX: used for IE browser Jave: used for Netscape (and FireFox) browserDefault user/password is admin/0000
33View Window Digital Pan/TiltSnapshots (to c:\webcam)LogoutIP Cam SettingsDigital Zoom-in/Zoom-outImage SettingOn-screen display (OSD) (time stamp)CMOS sensor Refresh rateStatus: resolution/number of user/frame rateNote: if displayed in red, it means motion detection occursStatus: IP Camera boot timeRecording (left click and then right click) in viewing area File formatFile lengthFile pathPre-file name
34System Camera Camera Name Setting
35User Existing user listingInput old password to confirmInput new user nameInput new passwordConfirm new passwordLogin user listing NTP Synchronize to local PC or time serverTime zone setting
36Motion Detection Enable/disable motion detectionEnable e-mail when motion detectedIntervals between two successive mailE-mail address and SMTP server settingsEnable ftp when motion detectedIntervals between two successive ftpFTP server related settings DDNS Step 1、Example of Creating an Account 1. First, please go to www.dyndns.org and create an account there. 2. After creating an account with your preferred e-mail, go to DNS Services, Dynamic DNS. There provides free DNS service for those whom have dynamic Public IP addresses. 3. Create your preferred hostname, e.g. “webcam”. And select the domain name from the drop down list. After that, your IP address, for example “203.123.0.189” will be automatically shown on the IP Address column. 4. Click “Add Host”.
37 Step 2、Login to CS-W02G2 Configuration Page 1. Login to your IP camera with the local IP address. And enter “System” “→DDNS”. 2. Check the check box to enable DDNS function. 3. Choose the DDNS provider. (Currently only supports DynDNS server) 4. Enter the Hostname, for example “webcam.dynalias.net”. And enter your Account/Username and Password. 5. Click “Save” to save the settings. Enable/disable DDNS functionCurrently DynDNS server is supportedEnter domain name, account, and password from DynDNS server Different routers have different web interface, so you have to remember to open port 80 on your router for CS-W02G2.
38Network LAN Settings Chceked: DHCPUnchecked: Fixed IP Network settingsIP Camera control and video port. Allow these two ports in port forwarding settings (of router) to enable remote surveillance
39Wireless LAN Settings Enter the SSID of the wireless APSelect infrastructure or adhoc typeSelect open system or share keySelect 802.11B or 11G modeEnable WEP Key data encryptionSelect 64 or 128 bit WEP typeSet consistent key sequence as AP doesEnter WEP key as wireless AP defines Update Click to reboot IP cameraClick to reload factory defaultOnline firmware update
40Technical Specification Models i-Watch 130Li-Watch 130W: With additional wireless interfaceSupportedprotocolsTCP/IP, SMTP client, HTTP server, FTP client,DHCP client, NTP client, DDNSImage Sensor 1/4" Progressive Scan CMOS sensor1.3M pixels. Minimum illumination: 2.0 lux @ F2.0 Reset button Use stick to touch reset button to restore factorydefault settingsLens Fixed focal (6.0 mm, F2.0) with fine tuningViewing angle 60°MotionDetection15 level sensitivitySnapshots transmitted via e-mail/ftpVideoCompressionMotion JPEG5 level quality selection OSD function Image can be overlaid with timestampResolutionsUp to 20 frames at 160x120Up to 20 frames at 320x240Up to 15 frames at 640x480Security User access with password protectionWEP 64/128 bit data encryptionImage settingConfigurable contrast and brightnessConfigurable sharpness and saturation3 level digital zoomLED indicatorDual color network connection indicatorGreen: ethernetRed: wireless LANWirelessinterface(i-Watch 130W)IEEE 802.11g 6 - 54 MbpsIEEE 802.11b 1 - 11 Mbps1 - 11 channelsAntenna gain: 2.0 dBiSupportedinstantmessengerMSN messenger 7.5 or laterSkype 2.5 or laterYahoo! Messenger 7.5 or laterUsers 5 simultaneous users Viewing systemrequirementsPentium III CPU 500 MHz or higher, or equivalentAMD256 MB RAMWindows 2000 and XPInternet Explorer 6.0 or laterConnectors Ethernet RJ45DC in connectorDimensions(HxWxD) 85 x 75 x 44 mm (antenna and stand excluded)Power 5V DC, 2.0 A4.5 watts comsumption Approvals FCC / CE / RoHSOperatingconditions5 - 50 °C (41 - 122 °F)Humidity 20 - 80% RHPackageincludes130L/130W network cameraDocumentation and software CDEthernet cable (Cat/5e)AC adapterQuick installation guideWarranty cardCamera stand bracketSpecifications

Navigation menu