Plantronics BACKBEATGO BLUETOOTH HEADSET User Manual 86993 01 EN GSG Montrose 111011 lo

Plantronics Inc BLUETOOTH HEADSET 86993 01 EN GSG Montrose 111011 lo

Contents

User manual 2 of 2

Designed in Santa Cruz, CaliforniaGETSTARTEDNEED MORE HELP?Phone support in USA:1-866-363-BLUE (2583) or plantronics.com/supportOnline user guide:plantronics.com/documentationLimited warranty details:plantronics.com/warrantyZ109N10687 TAKE A LOOK GET CONNECTEDLEARN MORETRY IT ONBackBeat® GO© 2011 Plantronics, Inc. All Rights Reserved. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics is under license. iPhone is a trademark of Apple Inc., registered in the U.S. and other countries. All other trademarks are the property of their respective owners. pn86992-01 (11.11) am86993-01 Stay Near Your Device: Bluetooth has a working “range” of up to 33 feet between your phone and earbuds before audio degrades and the connection is lost. For best audio reception, keep your phone on the right side of your body.Learn How to Reconnect: Your earbuds try to reconnect a lost connection. If they can’t, then tap the Call button once or manually reconnect via your phone's Bluetooth menu.The Right Fit = The Best Audio:For the best sound performance and a secure, comfortable fit, be sure to adjust the earbuds to rest gently in your ear and drape around the back of your neck.Use the provided fit kit to find the eartip that works best for you.Ensure that the earbud marked “R” is in your right ear. This improves the fit and keeps the controls in a convenient orientation.2. SetActivate the Bluetooth feature on your device, then use phone menus to “add,” “search” or “scan” for new Bluetooth devices.Phones have different menus to select from:iPhone: Settings > General > Bluetooth > On (starts the search for devices)BlackBerry® smartphone: Settings/options > Bluetooth: On > Search for devicesAndroid™ smartphone: Wireless & Networks > Bluetooth: On > Scan for devices1. Ready First time, right out of the box:With earbuds turned off, activate Bluetooth pairing mode by pressing Power/Pairing button on. The LED flashes red/blue to indicate pairing mode.Pairing new phone/reconnecting original:With earbuds turned off, press Power/Pairing button until the LED flashes red/blue.Check the Battery Level:If you are on a call or listening to audio you will hear a tone when the battery is low.You can check the battery level by tapping the Power button. The LED flashes to show the charge level. Blue flash = battery OK to fullRed flash = less than 15 minutes call time remainingJuggle Two Calls:You can take a second call and place the first call on hold by tapping the Call button to accept the new call. Switch between calls by pressing the Call button for a few seconds and you will hear a beep, indicating the switch is happening.You can end a call and return to the other call on hold by tapping the Call button.Some phones require tapping the Call button twice.Use Your Voice:Some smartphones allow you to use voice commands to activate their features, such as voice-dialing or playing music. To activate your smartphone's voice controls, press the Call/Audio button until you hear your phone prompt you for a command.Never Miss a Call:You will hear an incoming call alert while listening to stored or streaming audio. When you take the call, your stored audio (downloaded tunes, video or podcasts) will pause. If you are listening to live streaming audio (Internet radio) then it will mute, not pause, during your call. Once you end your call, your playback or streaming will resume.Decipher the Beeps:If you have a call on hold, you will hear a beep every 5 seconds. If you are on mute, you will hear a beep every 30 seconds.In addition, if you long-press certain buttons (more than 2-second press), a feedback beep will be heard (example, accessing the Voice Control feature on your phone). MICRO USB CHARGING PORT (Right Earbud)• 1 hour (before first use -LED is red until fully charged)• 2.5 hours for full charge VOLUME, TRACKING AND MUTE• Volume up or down (1 tap on + or – per level change)• Track forward or back (2-second press on + or – per track change) • Mute on or off during a call (1 tap on both + and – ) POWER, PAIRING AND BATTERY CHECK • Turn on or off (2-second press)• Activate pairing mode after initial set up (press until red/blue LED flashes) • Check battery level (1 tap when power is on) CALLS AND STREAMING AUDIO• Take a call or end it (1 tap)• Reject a call (2-second press)• Hold first call and answer second call (1 tap)• Switch between calls (2-second press)• End second call and retrieve first call (1 tap)• Transfer call from phone (1 tap)• Redial (2 taps)• Use phone’s voice-control feature to make a call (2-second press until tone is heard)• Reconnect lost Bluetooth® connection (1 tap if the earbuds can’t automatically reconnect)• Play or pause audio (1 tap)3. ConnectSelect “PLT_BBTGO” from the list of Bluetooth devices shown on your device.If device asks for a passcode, enter four zeros (0000). You may see **** on screen.Some devices also ask to confirm connection after pairing.The earbud’s LED will stop flashing red/blue once successfully paired/connected.You can now make a call using your device’s keypad or voice-dialing feature and enjoy audio listening from your device.CCDADBCABBluetooth® earbuds + micProject: GSG, ACCORDION, PSD, MONTROSE, ENDate: 11/10/11Component: Accordion User GuideFile Name: 86993-01_EN_GSG_MONTROSE_111011.aiArt Master Number: 86993-01Part Number: 86992-01Scale: 1:1Resolution: 300dpiLinks: N/AFonts: Gesta Light, Regular, Medium, BoldSoftware: CS5Printing Method: Offset LithographyInks: PMS Black C PMS 294 C Finishes: OVERALL MATTE VARNISHOVERALL MATTE VARNISHNotes: Designer: Malika Henderson/Blanca Castaneda Company: Content Rules, Inc. E-mail: malikaann@mac.com Phone: 415 847 6083 Project SpecificationsArea covered by band

Navigation menu