Plantronics BB903P Bluetooth Headphones User Manual 83988 21 BackBeat903 061510 lo

Plantronics Inc Bluetooth Headphones 83988 21 BackBeat903 061510 lo

Contents

user manual1

TIPS
Z109
N10687
© 2010 Plantronics, Inc. All Rights Reserved. Bluetooth
is a registered trademark of Bluetooth SIG, Inc. and any
use by Plantronics is under license. All other trademarks
are the property of their respective owners.
U.S. Patents Pending 83987-21 (06/10) AM83988-21
TAKE A GOOD LOOK CONNECT TO YOUR PHONE
1. READY
Activate the Bluetooth feature on your
device, then get it to add / search for /
discover new Bluetooth devices.
Phones have different menus to select from:
iPhone: Settings > General > Bluetooth > On
(starts the search for devices)
BlackBerry® smartphone: Settings/options >
Bluetooth: On > Search for devices
VIDEO TUTORIAL:
www.plantronics.com/pairing
3. CONNECT
Select “PLT_BB903+” from the list of
Bluetooth devices shown on your device.
If device asks for a passcode, enter four
zeros (0000). You may see **** on screen.
Some devices also ask to confirm
connection after pairing.
The headphone's LED will stop flashing
red/blue once successfully paired/connected.
You can now make a call using your device’s
keypad or voice-dialing feature.
NEED MORE HELP?
24-hour support in USA:
1-866-363-BLUE (2583)
Online user guide:
www.plantronics.com/documentation
1-year limited warranty details:
www.plantronics.com/warranty
Stay Near Your Device:
Bluetooth has a working “range” of up to
30 feet between the device and headphones
before audio degrades and the connection
is lost. For best audio reception, keep your
device on the left side of your body.
Know How to Reconnect:
Your headphones try to reconnect a lost
connection. If they can’t, then tap the Call
button once or manually reconnect via the
device’s Bluetooth menu.
ADJUST THE FIT
Understand the Lights You See:
The LED will advise status of headphones.
• Charging (solid red)
• Fully charged (solid blue)
• Low battery (2 red flashes every
15 minutes)
• On a call (blue flash every 2 seconds)
• Missed call (3 purple flashes. Repeats
for 5 minutes or until cancelled.)
• Pairing mode (repeating red/blue flashes)
GET
STARTED
BackBeat® 903+
Bluetooth® Headphones
Bluetooth wireless technology provides
a way for devices, like headphones and
phones, to communicate with each other
without wires.
“Pairing” is the set-up process of introducing
your headphones to your phone. Before
using your headphones for the first time,
you must pair them with your Bluetooth-
enabled phone.
Pairing is a one-time process unless your
phone loses the connection or you want to
pair to a new phone.
2. SET
First time, right out of the box:
With headphones turned off, activate
Bluetooth pairing mode by pressing
Power/Pairing button on. The LED flashes
red/blue to indicate pairing mode.
Pairing new phone/reconnecting original:
With headphones turned off, press
Power/Pairing button until the LED flashes
red/blue.
1. READY 2. SET 3. CONNECT
Check the Battery Level:
If you are on a call or listening to music and
hear 3 high tones then you have under 5
minutes talk time remaining.
At other times, you can check the battery
level by tapping the Power button. The
headphones will say how many hours of of
use remain. The LED also flashes red to
show the charge level.
1 flash = more than 2/3 full
2 flashes = 1/3 - 2/3 full
3 flashes = less than 1/3 full
For the best sound performance and a
secure, comfortable fit, be sure to adjust the
headphones to rest gently in your ear and
drape around the back of your neck.
1. Drape the stereo cable behind your neck.
2. Guide one earpiece behind your ear and
secure the eartip inside your ear using the
telescoping/swivel adjustments.
3. Repeat step 2 with the other earpiece and
continue to adjust the fit in either ear until
both eartips rest comfortably and
securely in your ears.
MUSIC BUTTON
• Play/Pause (1 tap)
• Bass Boost (2-second press)
• Mute Music or Call (1 tap)
• Enable/disable OpenMic™ to pause music and
activate mic (1 tap)
POWER/PAIRING BUTTON
• On/Off (2-second press to turn on,
4 second press to turn off)
• Activate pairing mode after initial set up
(press until red/blue LED flashes)
• Check battery level (1 tap)
VOLUME/TRACKING BUTTONS
• Volume Up/Down (1 tap per level change)
• Track Forward/Back (2-second press per track change)
CALL BUTTON
• Take a call or end it (1 tap)
• Redial (2 taps)
• Initiate phone’s voice-dialing
(2-second press until tone is heard)
• Reconnect lost Bluetooth connection
(1 tap if the headset doesn’t automatically reconnect)
• Cancel missed call LED (1 tap)
• Reject a call (2-second press)
• Transfer call to/from phone (during call, 2-second press)
• Enable/disable Online Indicator (while powered on, 2-second
press Call and Volume Up buttons)
MICRO USB CHARGING PORT
• Use with the AC wall charger:
1 hour before first use
3 hours (100% charge)
• Do not use headphones while charging
PLT_BB903+
+
-
LED
Area covered
by band
Project: GSG, ACCORDION, PSD, BB903, EN
Date: 06/15/10
Component: Accordion User Guide
File Name: 83988-21_BackBeat903+_061510
Art Master Number: 83988-21
Part Number: 83987-21
Scale: 1:1
Resolution: 300dpi
Links: N/A
Fonts: Gesta Light, Regular, Medium, Bold
Software: CS3
Printing Method: Offset Lithography
Inks:
Process Black
PMS 294
PMS 151
Finishes: OVERALL MATTE VARNISH
Notes: FINAL
Designer: Malika Henderson
Company: Oak Hill Corporation
E-mail: malikaann@mac.com
Phone: 1.415.847.6083
Project Specifications

Navigation menu