Plantronics BBP Wireless Stereo Headphone User Manual TempConfidential BackBeat PRO 2014 5 12

Plantronics Inc Wireless Stereo Headphone TempConfidential BackBeat PRO 2014 5 12

TempConfidential_BackBeat PRO-User manual 2014.5.12

The first time you power on your headphones thepairing process begins.NOTE If your phone supports Near Field Communication(NFC) go to NFC pairing (Android).1 Holding your headphones, slide the powerswitch to the on position. The headphone LEDsflash red and blue.RGET PAIRED 2Activate Bluetooth® on your phone and set it tosearch for new devices.•iPhone® Settings > Bluetooth > On*•Android™ > Bluetooth: On > Scan for devices**Menus may vary by device.3Select “PLT_BBPRO.”Once successfully paired, the headset LEDs stopflashing.NFC pairing (Android)1Ensure NFC is on and your phone’s display isunlocked. (Phones may vary.)2Tap and hold the headphones to the phone’s NFCtag location until NFC pairing completes. Ifnecessary, accept the connection.NOTE The headphone’s NFC tag is located on the outside ofthe left ear cup. (Phone tag locations vary.)ANCRLANCTAKE CONTROL Active Noise Canceling (ANC)Slide the switch to activate or deactivate ANC.ANC will block out unwanted noise.Play/pause musicTap the Play/pause button on the left ear cupto play or pause musicVolumeRotate the volume wheel forward (+) orbackward (–) to control the volume.Track selectionRotate the track wheel forward or backward to control the track selection.Open micWhile listening to music, you will be able to hearyour surroundings by tapping the Mic button toactivate or deactivate the mic.Voice enabaled assistantTo activate Siri or Google Voice, press the Callbutton for 3 seconds. (Devices may vary.)Answer or end a callTap the Call button on the right ear cup.Decline a callPress the Call button for 2 seconds.MuteDuring a conversation, press the Mic button .You hear “mute on” or “mute off.” While themicrophone is muted, an alert repeats every 15minutes.Call back last callDouble-tap the Call button .It takes up to 2 hours to fully charge yourheadphones. The LEDs turn off once charging iscomplete.=====TIP: To check the headphones battery status, tap the Callbutton while wearing your headphones. Headphonesmust be in idle state.Your headphones have up to 24 hours of listeningtime.CHARGE
Adjust the headphones for a comfortable fitLengthen or shorten the band until it fitscomfortably. When not using your headphones,fold the ear cushions in and against your body.ADJUST THE FIT1Press and hold the Call button until the LEDsflash red and blue.2Activate Bluetooth on your second device andfollow steps 2 and step 3 in "Get Paired."PAIR SECOND DEVICESmart sensors respond when you put on or takeoff your headphones.Putting on your headphones will:• Play music• Activate noise cancelling (when switched on)Taking off your headphones will:• Pause music• Deactivate noise cancelling (when switched on)USE SENSORSUse your headphones when the battery isexhausted or when traveling.Plug in the provided 3.5 mm in-line cable to theheadphone (located on the left ear cup) anddevice.NOTE When using your headphones in this mode turns offBluetooth. All other features will function in this mode.(Some phones may vary.)AIRPLANE MODEWhen listening to music, you will be able to hearyour surroundings by activating Open Mic .To increase or decrease the microphone level,rotate the volume wheel forward (+) orbackward (–). To cancel Open Mic, press the Micbutton again.ADVANCED OPEN MICYour headphones speak in English. You canchange the language and other settings usingyour PC/Mac, Plantronics tool, and the providedUSB cable.The MyHeadset™ Updater(plantronics.com/myheadset) tool enables you to:• Change language• Receive firmware updates• Turn prompts on/off• Turn "mute off" voice alert on/off• Turn smart sensors on/offCUSTOMIZEGET STARTEDNIRVANA®Designed in Santa Cruz, CaliforniaFind a local support numberplantronics.com/supportRead detailed online user guideplantronics.com/documentationNEED MORE HELP?© 2014 Plantronics, Inc. All Rights Reserved. Bluetooth isa registered trademark of Bluetooth SIG, Inc. and any useby Plantronics is under license. All other trademarks arethe property of their respective owners.Patents TEXTpnXXXXX-XX (02.14) amXXXXX-XX
FCC statement ·This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ·This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. ·These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. ·If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Certification information (SAR) This device is also designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA).
NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. IC Radiation Exposure Statement for Canada This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Navigation menu