Plantronics FH100 Mono Bluetooth Headset User Manual

Plantronics Inc Mono Bluetooth Headset

user manual

User GuideNEED MORE HELP? CALL US!Instead of driving back to the store, call us for help on pairing, fit or usage of your new headset.1-866-363-2583®
2Package Contents and FeaturesAC Charger 100 – 240V Refer to separate Safety Guide before using headset. note Never charge the battery where the temperature may fall below 32°F (0°C) or rise above 104°F (40°C). Do not use your headset while it is connected to the charger.CHARGING TIME2.5 hours ............... Full chargeRed status light glows while charging. Do not use until fully charged.One-Touch Button: Power On/Off Call Answer/End Pairing Mode Voice DialingOptional Earloop (ts either ear)LED Status LightConnector for Rechargeable Li-ion BatteryWhat Is Bluetooth?
3Package Contents and FeaturesOptional Earloop (ts either ear)LED Status LightBluetooth wireless technology provides a way for devices, like headsets and phones, to communicate with each other without wires. Pairing is the set-up process of introducing your headset to your phone. Before using your headset for the rst time, you must pair it with your Bluetooth-enabled phone. Plantronics QuickPair™ TechnologyTo simplify the Bluetooth setup process, your new headset uses Plantronics QuickPair technology. This process is shown on the next page.• The rst time you turn your headset on, your headset automatically enters pairing mode for 10 minutes. • Until you successfully pair your headset with a Bluetooth-enabled phone, every time you turn it on it will enter pairing mode. • To later pair to a new phone, with the headset off, press and hold the One-Touch Button until the LED ashes red-blue, which indicates pairing mode status .Range (the distance between headset and phone)• To maintain the connection, keep your headset within 33 feet of your phone.• For the least amount of interference place the headset and phone on the same side of your body.If you move too far from your phone and lose the Bluetooth connection:• the headset may reconnect automatically within 60 seconds when you move closer to your phone (you will hear a low tone), OR • you may have to tap the One-Touch Button to reconnect (you will hear a low tone), OR • if neither of the above options work, you may have to reconnect to your headset using your phone’s Bluetooth menu.What Is Bluetooth?
41How to Pair Your Phone With Your Headset for the First Time1 Turn on the Bluetooth feature on your phone. For most phones, select Settings/Tools > Connections > Bluetooth > On. See your phone’s user guide for more information.2 Turn on the QuickPair feature of your headset. Turn on your headset by pressing and holding the One-Touch Button until the LED ashes blue, then alternately ashes red-blue. If you don’t see these ashes, press and hold the One-Touch Button until you see the red-blue ashes.3 Set your Bluetooth phone to ‘discover’ to locate the headset. This usually involves going to ‘setup,’ ‘connect,’ or ‘Bluetooth’ menu on your phone and selecting the option to ‘discover’ or ‘add a device.’4 Once available headsets are listed, select your headset (FreeHand 1xx). If prompted for a passkey, enter 0000. When pairing is successful, the status light on your headset glows blue. Your phone will also conrm when pairing is complete.Pairing Your Headset324SETTINGSSETTINGSTime and DatePhone SettingsBluetoothSound SettingsNet wor k Ser vi cesSecurityReset SettingsBLUETOOTHBLUETOOTHDis c ove r/SearchBLUETOOTHBLUETOOTHFreeHand 1xxPASSK EY0000Call Us with Questions 1-866-363-BLUE (2583)
5Headset Controls and IndicatorsAction Status Light ToneTurn the headset on or offPress and hold the One-Touch Button for 3 seconds.On: Short blue ashOff: Short red ash, then turns offOn: Four rising tones then one high toneOff: High tone then four descending tonesAnswer/end a callTap the One-Touch Button. None Brief tone at the beginning or end of the call.Make a call Enter the number on your phone and press Send.Blue ash every 2 seconds until the call is ended.No tone. Phone rings until answered.Battery level None Red ashing Five rapid high tones every 10 seconds when battery is critically low. Charge immediately.Adjust the volume Use your phone to adjust or lower volume.None NoneTransfer a call from headset to phone, or from phone to headsetWhile the call is in progress, press and hold the One- Touch Button until you hear a tone.None Single low toneDismiss missed call indicatorTap One-Touch Button Triple blue ash every 20 seconds until dismissed.NoneOut of range Press One-Touch Button once to manually reconnect. Headset will automatically attempt to reconnect when in range.None 2 high tones when leaving range. Single high tone when back in range. Single low tone when manually or automatically reconnected.Voice dial Press and hold One-Touch Button until you hear a tone.None Single low tone
6TroubleshootingMy headset does not work with my phone.Your headset may not have been in pairing mode when your phone was searching for it. Repeat the pairing process on page 4.You may have made incorrect menu selections on your phone while pairing. Repeat the pairing process on page 4.Callers cannot hear me, or I cannot hear callers/dialing tone.Make sure the headset is turned on. Your headset may be out of Bluetooth range or experiencing interference. Move the headset closer to your phone, and make sure your headset and phone are on the same side of your body. Your headset battery is drained. Recharge the battery using the supplied AC power adapter.The listening volume is too low. Increase the volume on your phone.My headset is flashing red then blueYour headset is in Pairing mode. If you are not trying to pair the headset, reset it by simply turning headset off then on again. Otherwise, see Pairing on page 4.
7Product SpecificationsTalk Time* Up to 6.5 hoursStandby Time* Up to 6 daysCharge Time 2.5 hours for full chargeRange Up to 33 feet (10 meters) away from phonePower Requirements 5V DC – 180 mABattery Type Rechargeable lithium ion polymerStorage/Usage Temperature32º F - 104º F (0º C - 40º C)Version 2.0 + EDR (Enhanced Data Rate)Supports your phone’s Bluetooth Hands-free (HFP) and Headset (HSP) proles.* Battery enabled. Performance may vary by device.
FFeeddeerraall CCoommmmuunniiccaattiioonnss CCoommmmiissssiioonn ((FFCCCC)) SSttaatteemmeenntt 1155..2211 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 1155..110055((bb)) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. 8
This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions: 1) this device may not cause harmful interference and 2) this device must accept any interference received, including interference that may cause undesired operation of the device. FFCCCC RRFF RRaaddiiaattiioonn EExxppoossuurree SSttaatteemmeenntt:: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 9
Industry Canada (IC) Statement 15.21You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b)This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the IC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: * Reorient or relocate the receiving antenna. * Increase the separation between the equipment and receiver. *Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. * Consult the dealer or an experienced radio/TV technician for help. Operation is subject to the following two conditions: 1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device. IC RF Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 10
Freehand 1003115593CONFORMS TO ANSI/UL STD. 60950-1CERTIFIED TO CAN/CSA STD. C22.2 NO. 60950-111
12

Navigation menu