Plantronics P590 Bluetooth Headset User Manual

Plantronics Inc Bluetooth Headset

UserManual.wiki >

Plantronics >

P590 User Manual HTML Version

User Manual

AC Charger

Headset

Universal Adapter

Desktop Charging

Stand

USB Charging Cable

In-flight Cable

Travel Case

Pulsar 590A only

Package Contents

Features

Charging

Pairing

Adjusting

Powering

In-flight & Other Uses

Indicator Lights 6

Headset Controls

Technical Assistance

Troubleshooting

Regulatory Notices 14

Visit www.plantronics.com/productregistration to

with the best possible service and technical support.

TABLE OF CONTENTS PACKAGE CONTENTS

UNIVERSAL ADAPTER*

DESKTOP CHARGING STAND

Power Dial

*Universal adapter included with Pulsar 590A only or sold separately.

AC Charging Jack

Headset Charging

Jack Ports

3.5mm Plug

Pairing/Connect

Button

Indicator Light

Adjustable

Headband

Headset

Charging Jack

Headset Controls

Telescoping

Voice Tube

Call Control Button

Indicator Light

Volume Up

Track Forward

Volume Down

Power Switch

Mute or Play/Pause

Track Back

HEADSET

HEADSET CONTROLS

FEATURES FEATURES

Option A*

590

1. Connect AC charger to desktop charging stand.

2. Rotate earpieces under headband so pointing inward.

3. Place headset charging jacks into charging jack ports.

Option B*

Option C*

*Charge for 3 hours before first use. Headset indicator light will flash red

when charging and turn solid blue when fully charged.

CHARGING POWERING

Universal Adapter

Headset

Slide power switch up/down to turn

power on/off.

Rotate power dial counterclockwise/

clockwise to turn power on/off.

Power

Flashes red

Pairing

Flashes red and blue

Charging

Flashes red

When fully charged light will turn blue

Streaming Audio/

Connected to Headset

Flashes blue

Battery Indicators

•3 red flashes

for full charge

•2 red flashes

for half charge

•1 red flash

for low battery

INDICATOR LIGHTS

Condition Indicator Light

590

Plantronics

Headset Passkey

0000

NOTE: The Pulsar headset is paired with the universal adapter at the factory.

However, after powering on, if adapter and headset flash red, rather than blue,

you may need to connect or pair them again. To reconnect, simply press the

adapter pairing/connect button. To pair again, follow directions below.

While pressing call control button, (1)

power headset on. (2)

1. While headset indicator light is

flashing red and blue, navigate

to the Bluetooth®discovery

screen on your device.

2. Place device in Discovery mode.

3. Select “590 Plantronics.” (3)

4. When asked for passkey, enter

0000. (4)

PAIRING

While headset is flashing red and blue:

1. Power adapter on.

2. Press and hold the adapter pairing/

connect button for 5-7 seconds until

the adapter is flashing red and blue,

then release the button.

Headset and adapter will flash blue

when paired successfully.

While pressing call control button, (1)

power headset on. (2)

PAIRING

109

In-flight cable can be used with any

3.5mm audio jack to convert your

wireless Pulsar 590 headset into

wired headphones.

1. Power headset off. (1) In-flight

cable will not operate when

headset is powered on.

2. Insert in-flight cable into

3.5mm jack on left earpiece. (2)

Note: Telescoping

voice tube is

disabled when

in-flight cable is

in use.

IN-FLIGHT AND OTHER USES

Position so that telescoping voice

tube is on right ear. Adjust headband

if desired.

Point telescoping voice tube tip

toward mouth and extend for optimal

voice transmission.

ADJUSTING

Features must be supported by host device or service provider.

Power On / Off

Making / answering /

ending calls

Switching a call from

phone to headset

Switching a call from

headset to phone

*Only works with Bluetooth® Audio/Video Remote Control Profile (AVRCP);

does not work when using universal adapter.

Activate voice

dial

Call reject

Activate last

number redial

Short key press.

Long key press.

High tone

followed by

low tone.

High tone

followed by

low tone.

Long key press. High tone followed

by low tone.

Short key press.

High tone.

Slide switch.

Play and pause*

Track forward

and back*

Muting a call

Short press to skip /

go back to next /

previous track.

Short press to mute /

unmute telescoping

voice tube or speakers.

Repeating

low tone.

High tone.

Short press to

pause / resume audio.

Adjusting

volume

Short press for

incremental change.

Hold for continuous

change.

Mid tone for

each adjustment.

Double low tone

at limit.

Double short

key press.

High tone for

each key press.

Key Feature Action Tone

FEATURES HANDS-FREE FEATURES

FEATURES

Features must be supported by host device or service provider.

Power On / Off

Making / answering /

ending calls

Switching a call from

phone to headset

Switching a call from

headset to phone

*Only works with Bluetooth® Audio/Video Remote Control Profile (AVRCP);

does not work when using universal adapter.

Activate voice

dial

Call reject

Activate last

number redial

Short key press.

Long key press.

High tone

followed by

low tone.

High tone

followed by

low tone.

Long key press. High tone followed

by low tone.

Short key press.

High tone.

Slide switch.

Play and pause*

Track forward

and back*

Muting a call

Short press to skip /

go back to next /

previous track.

Short press to mute /

unmute telescoping

voice tube or speakers.

Repeating

low tone.

High tone.

Short press to

pause / resume audio.

Adjusting

volume

Short press for

incremental change.

Hold for continuous

change.

Mid tone for

each adjustment.

Double low tone

at limit.

Double short

key press.

High tone for

each key press.

Key Feature Action Tone

FEATURES HANDS-FREE FEATURES

FEATURES

HEADSET CONTROLS HEADSET CONTROLS

Problem

My headset does not

work with my phone.

Callers cannot hear me.

Callers say my voice is too quiet.

I cannot hear caller/dial tone.

Headset doesn’t charge in the

desktop charging stand.

I cannot hear audio when

using the inflight cable.

I cannot complete the pairing

with my Bluetooth device.

I do not get a sound from my

headset when using the

universal adapter.

Volume is too high / low when

listening to audio, but fine

when making a phone call.

See pages (7-8) “Pairing with

Bluetooth Device.”

Headset is muted. Press the mute button

on the headset to unmute the microphone.

Ensure that the telescoping voice tube is

fully extended and point the tip toward the

corner of your mouth. Ensure the end of the

microphone is not blocked with dirt or debris.

•Headset is turned off. Check the power

switch and slide up to ON.

•Headset is out of range. Walk to within

30 feet (10 meters) of the phone and check

the Bluetooth link.

•Headset battery is dead. Charge your

battery using the AC charger supplied.

•Listening volume is too low. Press

the Volume Up button to increase the

sound heard in the headset.

Ensure that headset is completely inserted

into the charging stand—if properly inserted,

a red indicator light on the headset will

slowly flash.

Headset must be turned off when using

the in-flight cable.

Universal adapter must be turned

off when pairing to another device.

•It may take up to 30 seconds for the

devices to connect and audio to stream.

•Press the connect button on the headset

or adapter after 30 seconds if there is

still no sound.

•Check audio mute on the headset. Press

the mute button on the headset to unmute.

•Check pairing. See page (8) “Pairing

with universal adapter.”

Check the volume of the audio

source device.

Solution

PULSAR 590 & 590A

PULSAR 590A ONLY

Plantronics Technical Assistance Center (TAC) is ready to assist you!

Dial (866) 363-BLUE(2583), or visit the Support section of our website at

www.plantronics.com.

FCC REQUIREMENTS PART 15

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference

that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception which can be determined by

turning the radio or television off and on, the user is encouraged to try to

correct interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on another circuit.

4. Consult the dealer or an experienced radio/TV technician for help.

EXPOSURE TO RF RADIAT I ON

This device and its antenna must not be collocated or operated in

conjunction with any other antenna or transmitter. To comply with FCC RF

exposure requirements, only use supplied antenna. Any unauthorized

modification to the antenna or device could void the user’s authority to

operate this device.

TECHNICAL ASSITANCETROUBLESHOOTING