Plantronics PA50 Wireless Microphone Clip User Manual 6 AL8 PA50
Plantronics Inc Wireless Microphone Clip 6 AL8 PA50
User manual
PA50 Wireless Mic
Getting Started
Refer to the safety instructions at the end of this guide prior to installation or use. For the full
User Guide, visit www.plantronics.com/calisto800
The PA50 wireless mic is designed for use with the Calisto 800 series of multi-device
speakerphones. The wireless mic provides unparalleled freedom of movement and optimal
voice transmission.
1: Setup
/!\ Disconnect all cables from the Calisto base.
Insert wireless mic docking station firmly into the slots at the
bottom of the base.
Reconnect all cables. Place the wireless mic in the docking
station and charge it it for a minimum of 2 hours or until the
Calisto screen indicates the mic is fully charged.
2: Pairing
Once the wireless mic is fully charged, on the Calisto
speakerphone, go in Menu > Settings > Bluetooth Setup
and select “Headset (or Wireless Mic)” and then “Pair New
Headset”.
Put the wireless mic in pairing mode by pressing the
button for 6 seconds or until the light flashes red/green.
Press “Next” to prompt Calisto to search for it.
Follow the instructions on screen to complete pairing. Once it
is paired, the wireless mic is connected.
3: Wearing and Use
The wireless mic can be worn on a collar or lapel, see diagram
for optimal location.
The wireless mic can also be placed flat on a table for flexible
small group conferencing. It provides 360- degree microphone
coverage.
Talk Time: Up to 7 hours
Maximum range: Up to 45 feet/12 meters
4: Features
Once undocked, press the key on the wireless mic to
replace the built-in speakerphone microphone.
When the wireless mic is active, the {icon} is displayed on
screen and the built-in speakerphone microphone is turned off.
To transfer a call from the wireless mic to the speakerphone
and back, press on the speakerphone.
Talk/End button: Press with one tap to answer or end a call.
The key is green when you have an incoming call, red when
you are on a call.
Mute/Unmute buttons: press red button on both sides. The
buttons light red when a call is muted.
Warranty
Warranty: Plantronics offers a two (2) year limited warranty. For full warranty details, conditions
and technical assistance, please visit our website: www.plantronics.com/support
Safety Instructions
Please read the following safety and operational instructions before using your Calisto phone system.
Please keep these instructions for your reference. When using this product, these basic safety
precautions and warnings should be followed to reduce the risk of fire, electric shock, injury to persons
and damage to property.
/!\ This symbol identifies and alerts the user to the presence of important safety warnings.
Operating, storage and charging temperature is 0°C to 40°C (32°F to 104°F).
/!\ Warnings
o Observe all signs and instructions regarding the use of an electrical device or RF radio product in
designated areas, such as gas/refueling stations, hospitals, blasting areas, potentially explosive
atmospheres, or aircraft.
o Do not insert anything into the product because this may cause damage to the internal components
or cause injury to you.
o Avoid contact with liquids. Do not locate this product near water, for example, near a bathtub, or sink,
in a wet basement, or near a swimming pool.
o Use only those Plantronics products and accessories designed for use with this product.
o CHILDREN. Never allow children to play with the product—small parts may be a choking hazard.
o If you experience a skin irritation after using this product, discontinue use and contact Plantronics.
/!\ Wireless Microphone Charging/Battery Warnings (PA50)
o Use only the charging base supplied by Plantronics to charge the microphone. Do not use the
charger for any other purpose.
o Charge the microphone according to the instructions supplied with the unit.
o Never store or use the product or charge the battery where the temperature may fall below 0°C (32°F)
or rise above 40°C (104°F).
o To avoid the risk of explosion, fire or leakage of toxic chemicals, please observe the following
warnings:
Do not dispose of the product or battery in a fire or heat above 40°C (104°F).
This product has an embedded, non-replaceable battery, designed to last the life time of the
product. Do not attempt to open the product or remove the battery as this may cause injury to
you or damage the product. Please contact the local recycling facility for removal of the
battery.
Do not open, deform or mutilate the battery. There may be corrosive materials which can
cause damage to eyes or skin and may be toxic if swallowed.
RECYCLING: This product must be recycled or disposed of properly. Contact your local recycling center
for proper disposal instructions
FCC Requirements Part 15
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on another circuit.
4. Consult the dealer or an experienced radio/TV technician for help.
Exposure to RF Radiation
The internal wireless radio operates within the guidelines found in radio frequency safety standards and
recommendations, which reflect the consensus of the scientific community. Independent studies have
shown that the internal wireless radio is safe for use by consumers. Visit plantronics.com for more
information.
The Microphone Clip complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
NOTE: Modifications not expressly approved by Plantronics, Inc. could void the user’s authority to
operate the equipment.
Industry Canada Regulatory Information
This product meets the applicable Industry Canada technical specifications/Le présent materiel est
conforme aux specifications techniques applicable d’ Induristrie Canada.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.