Plantronics VPRO Bluetooth headset User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1031644
Application ID	UCtG26ESdv4i4bUd2Re09A==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	100.77kB (1259673 bits)
Date Submitted	2008-11-17 00:00:00
Date Available	2009-05-15 00:00:00
Creation Date	2008-09-23 21:53:09
Producing Software	Adobe PDF Library 8.0
Document Lastmod	2008-11-13 14:47:54
Document Title	User manual
Document Creator	Adobe InDesign CS3 (5.0)

Plantronics Voyager® PRO
User Guide
Welcome
Registering Your Product
Thank you for purchasing the Plantronics
Voyager PRO headset. This guide contains
instructions for setting up and using your new
headset.
Visit www.plantronics.com/productregistration to
register your product online so we can provide
you with the best service and technical support.
Please refer to the separate For Your Safety
guide for important product safety information
prior to use of the product.
Getting Assistance
The Plantronics Technical Assistance Center
is ready to assist you. You can find answers
to frequently asked questions, ask a question
using e-mail, receive service over the Internet, or
speak directly with a representative. Visit www.
plantronics.com/support or call 1-866-363BLUE (2583).
NOTE If you are considering returning
this headset, please contact the Technical
Assistance Center first.
ii
NOTE For pairing your headset, your Passkey/
PIN code is 0000.
Contents
Package Contents and Accessories............................................ iv
Charging Your Headset.................................................................2
Checking the Battery Status...............................................3
Automatic Battery Status Alerts..........................................3
Pairing Your Headset.....................................................................4
How to Pair Your Headset for the First Time.......................4
Adjusting the Fit............................................................................6
Changing Ear Tips...............................................................7
Headset Controls and Indicators..................................................8
Product Specifications................................................................10
Using More than One Bluetooth Phone .....................................11
How to Initiate a Call.........................................................11
How to Answer a Call While Talking on the Other Phone.11
Troubleshooting...........................................................................12
EN
Limited Warranty.........................................................................13
iii
Package Contents and Accessories
Volume Up (+) and
Down (-) Buttons
Mute (press +/- buttons
simultaneously)
Call Control Button
Status Indicator (LED)
Power On/Off Button
Micro USB Charging Jack
Microphones
iv
Package Contents and Accessories
Soft Gel (S, M, L) Eartips
and Foam Eartip Cover
Call Control Button
Charging Case
Status Indicator (LED)
Power On/Off Button
AC Charger
EN
Eartip
For a complete list of accessories available for purchase, go to www.plantronics.com.
Charging Your Headset
Using the AC Charger
Your new headset performs best when fully
charged.
1 Plug the AC charger into a power outlet.
2 Connect the AC charger to the charging
jack on the headset.
charging status indicator light
Charge Level
Charging time
2 hours ...........................
Full charge
30 minutes . ....................
	Minimum charge
before first use
Indicator Light
Fast charge
0-70%
Solid red LED during charge
cycle
70%-100%
Very slow red flashing LED
until fully charged
Fully charged
LED off
WARNING Do not use your headset while it is
connected to the charger. The headset will not
function while it is charging.
Charging Your Headset
Checking the Battery Status
Automatic Battery Status Alerts
Your headset is equipped with an embedded,
non-replaceable battery that can be recharged.
When the battery charge is very low, a vocal
warning and tone will automatically occur.
To check the status, the headset must be powered
on. Tap the power button and the indicator light
flashes red to show the battery charge level.
Low battery warnings
Battery Level Whisper
1/3 charge
Charge indicator lights
Red Flashes
Battery Level
Less than 1/3 full
1/3 to 2/3 full
More than 2/3 full
“Battery Low”
repeats every
15 minutes
Tone
Double high tone
every 5 minutes
Critically low “Recharge
Triple high tone
Battery” repeats every 10 seconds
every 2 minutes
EN
Pairing Your Headset
Pairing is the process of introducing your
headset to your phone. Before using your
headset for the first time, you must pair it
with your Bluetooth® enabled phone. Your
new headset includes Plantronics QuickPair
Technology to simplify the Bluetooth setup
process. The first time you turn your earpiece
on, your earpiece automatically enters pairing
mode for 10 minutes. Once paired successfully,
your earpiece stays on for instant use.
If not successfully paired after 10 minutes, your
earpiece automatically powers off. When you
turn the earpiece on again, it automatically
goes into pairing mode until successfully paired
with a Bluetooth phone.
To see a demo of the pairing process, visit
www.plantronics.com/EasyToPair
How to Pair Your Phone with Your
Headset for the First Time
1 Turn on your phone’s Bluetooth feature.
For most phones, select Settings/Tools >
Connections > Bluetooth > On. See your
phone’s user guide for more information.
2 Turn the headset on.
Press and hold the power button until the
indicator flashes red/blue. The headset is
now in pairing mode.
If you don’t see the red/blue flash, press and
hold the power button to turn your headset
off, and then press and hold the power
button again until you see the red/blue flash.
NOTE This headset is equipped with Secure
Simple Pairing (SSP). If your phone supports
Pairing Your Headset
SSP, your phone will automatically locate and
pair with this headset.
SETTINGS
Time and Date
Phone Settings
Bluetooth
3 Use the commands on your phone to
locate your headset.
For most phones, select Settings/Tools >
Connections > Bluetooth > ProPlantronics.
See your phone’s user guide for more
information.
Sound Settings
Network Services
Security
Reset Settings
4 When prompted for the Passkey/PIN
code, enter 0000.
Pairing is successful when the indicator on
your headset flahes blue. Your headset is
now connected and ready to use.
8BK;JEEJ>
FheFbWdjhed_Yi
PASSKEY
0000
EN
note To pair your headset with an additional
device, turn on the device then repeat steps 2
through 4.
BLUETOOTH
Discover/
Search
Adjusting the Fit
1 Place the earloop behind your ear and
rotate the headset so that the speaker
rests comfortably in your ear.
2 Align the microphone with the corner of
your mouth.
For optimal voice clarity, pivot the boom
toward the corner of your mouth.
3 The headset can be worn on either ear
by swiveling the speaker housing and
closed boom.
Adjusting the Fit
Changing Ear Tips
The headset comes with the medium eartip
installed, but you can replace it with the optional
small or large eartip provided.
1 To remove the eartip, grip the eartip with
your thumb and forefinger. Gently push
it down and rotate it a quarter turn to the
left to align with slots on the eartip with
the speaker housing. Gently lift the eartip
away from the headpiece.
2 To attach a new eartip, align the tabs on
EN
the eartip with the slots on the speaker
housing. Gently push the eartip down
while turning it a quarter turn to the right.
The eartip will stop rotating when it is
attached.
Headset Controls and Indicators
Action
Indicator Light
Tone
Reject call
Press call control
for 1 second
None
Single low tone
Missed call
Tap call control to
dismiss indicator
Triple purple flash
until dismissed
None
Mute call
Press volume up
and down buttons
simultaneously for
1 second
None
Mute on: Headset whispers “Mute
On” followed by low-high tone, then
low tone every 5 minutes
Tap volume up or
volume down
Single blue flash
Adjust the volume
(during call)
Mute off: Headset whispers “Mute
Off” followed by high-low tone
Tone at each change in volume.
Double tone when min/max volume
level reached.
WARNING Do not use headsets at high volumes for an extended period of time. Doing so can cause
hearing loss. Always listen at moderate levels. See www.plantronics.com/healthandsafety for more
information on headsets and hearing.
Headset Controls and Indicators
Indicator Light
Tone
Double-tap call
control button
None
Double low tone
Voice-activated
dialing
Press call control
button for 1 second
None
Single low note (phone
may then prompt you to
say a name)
Transfer a call from
headset to phone
or from phone to
headset
While on a call, press
call control button for
1 second
None
Single followed by double
low tones
Check status
Press any button
Short blue flash
None
Enable/disable call
indicator
Press power and
volume buttons for
1 second
Turn indicator on: blue glow
increases for 2 seconds.
Turn indicator off: blue glow
fades for 2 seconds
Single low tone
EN
Action
Redial
Product Specifications
10
Talk time*
Up to 6 hours
Standby time*
Up to 5 days or 120 hours
Range*
Up to 33 feet (10 meters)
Headset weight
17.5 grams
Battery type
Lithium ion polymer
Charge time
2 hours for full charge
Bluetooth version
2.1 + EDR (Enhanced Data
Rate)
Profile
HSP, HFP, Secure Simple
Pairing
Power
requirements
5V DC – 180 mA
Storage/operating
temperature
50F – 104F (10C-40C)
Charging
temperature
32F - 104F (0-40C)
* Performance dependent on battery and may vary by
device. Audio quality degrades as you move out of
range and is dependent upon the device with which
the headset is paired.
Using More Than One Bluetooth Phone
Plantronics Voyager PRO supports multipoint
technology, which allows you to use one
headset with two different Bluetooth mobile
phones. To pair an headset to a second phone,
see “Pairing Your Headset” on page 4.
How to Initiate a Call
The headset initiates a call on the phone you
most recently used. To use the second phone,
initiate the call using the controls on the second
phone. The second phone forms an active link
with the headset.
How to Answer a Call While Talking on
the Other Phone
To answer the second call, the first call must be
terminated. There is no function for placing one
call on hold while answering another call from
the headset. To avoid issues switching between
calls, use the call control button on the headset
rather than your phone controls.
1 Press the call control button once to
hang up the existing call.
2 Press the call control button again to
answer the new call from the other
phone.
EN
NOTE If you choose not to answer the second
call, and you have voice mail on the second
phone, the call will go to voice mail.
11
Troubleshooting
My phone did not
locate the headset.
Turn both your phone and headset off and on, and then repeat the pairing process
on page 4.
I could not enter
my PIN code/Passkey.
Turn both your phone and headset off and on, and then repeat the pairing process
on page 4. Your Passkey/PIN code is 0000.
I cannot hear
caller/dial tone.
The headset may not be turned on. Tap the call control button. If a blue light
flashes then the headset is on. If not, then press the call control button for
approximately 2 seconds until you hear a tone or see the indicator glow blue.
Your headset battery may be drained. Charge your battery. See “Charging Your
Headset” on page 2.
Your headset may be out of range from your phone. Move back into range and
manually reconnect by pressing the call control button.
Callers cannot
hear me.
12
Make sure that the headset is sitting correctly in your ear with the microphone
pointing towards the corner of your mouth. See “Adjusting the Fit” on page 6.
IMPORTANT SAFETY AND OPERATIONAL
INFORMATION
Please read the following safety and operational instructions before using your
Bluetooth earpiece and accessories. Please keep these instructions for your reference.
Additional warnings may be present on the product, packaging, or in the user
instructions.
This symbol
warnings.
identifies and alerts the user to the presence of important safety
GENERAL:
Operating and storage temperature is 10°C to +40°C (50°F to +104°F)
WARNINGS
Exposure to high volume sound levels or excessive sound pressure may damage your
hearing. Although there is no single volume setting that is appropriate for everyone,
you should always use your earpiece with the volume set at moderate levels and avoid
prolonged exposure to high volume sound levels. The louder the volume, the less time
is required before your hearing could be affected. You may experience different sound
levels when using your earpiece with different devices. The device you use and its
settings affect the level of sound you hear. If you experience hearing discomfort, you
should stop listening to the device through your earpiece. To protect your hearing, some
hearing experts suggest that you:
1. Set the volume control in a low position before putting the earpiece on your ears.
2. Limit the amount of time you use earpiece at high volume.
3. Avoid turning up the volume to block out noisy surroundings.
4. Turn the volume down if the sound from the earpiece prevents you from hearing
people speaking near you.
See www.plantronics.com/healthandsafety for more information on earpiece and
hearing.
• Use of a earpiece that covers both ears will impair your ability to hear other
sounds. Use of such an earpiece while operating a motor vehicle or riding a
bicycle may create a serious hazard to you and/or others, and is illegal in most
regions.
• Check local laws regarding use of a mobile phone and earpiece while driving.
If you use the earpiece while driving ensure your attention and focus remain on
driving safely.
• Observe all signs and instructions that require an electrical device or RF radio
product to be switched off in designated areas, such as gas/refueling stations,
hospitals, blasting areas, potentially explosive atmospheres, or aircraft.
16
• Keep all products, cords, and cables away from operating machinery. As with
all corded products, there is a danger of strangulation if a cord should become
wrapped around your neck.
• This product is not a toy. Never allow children to play with the product– small
parts may be a choking hazard.
• Install and use eartips and earbuds in accordance with the instructions provided.
Do not force eartips or earbuds down the ear canal. If either becomes lodged in
the ear canal, seek medical attention immediately.
• Ensure eartips and earbuds are kept clean and free of ear wax buildup to
maintain the specified product performance.
• Applying excessive pressure to the earpiece may injure the outer ear. Do not wear
the earpiece while sleeping or in other situations where pressure may be exerted
against the earpiece.
• Do not disassemble or insert anything into the product or charger because this
may cause damage to the internal components or cause injury to you.
• If the product or charger: overheats; has a damaged cord or plug; has been
dropped or damaged; has been dropped into water, disconnect any charger from
its supply, discontinue use of the product and contact Plantronics.
• Prevent rain, moisture or other liquid from coming into contact with the product
to protect against damage to your earpiece or injury to you. This warning is not
applicable for ruggedized or sports products which are designed to withstand
contact with moisture.
CHARGING WARNINGS
• To reduce the risk of electric shock, explosion or fire, use only the charger
supplied by Plantronics to charge the product. Do not use the chargers with
other products or for any other purpose. Ensure that the voltage rating corresponds to the local mains or power supply you intend to use.
• If your earpiece is designed to be charged with your mobile phone charger using
a custom adapter, use only mobile phone chargers approved and provided by
your mobile phone manufacturer.
• Charge the earpiece according to the instructions supplied with the unit.
• Ensure the mains (AC Power) socket-outlet for the charger is located near the
equipment and is easily accessible.
en
17
BATTERY WARNINGS
To avoid the risk of explosion, fire or leakage of toxic chemicals, please observe the
following warnings:
• Do not dispose of the product or battery in a fire. The battery cells may explode.
• Do not open or mutilate the battery. There may be corrosive materials which can
cause damage to eyes or skin and may be toxic if swallowed.
• Always store batteries where children cannot reach them.
• If your product has a non-replaceable battery, do not attempt to open the product
or remove the battery.
• If your product has a replaceable battery, use only the battery type supplied by
Plantronics. Observe the correct polarity when installing the battery. Remove
the battery if it will not be used for an extended period; remove a spent battery
promptly.
• If your product is designed to be recharged from a non-rechargeable battery:
use only the battery type specified in the product instructions; do not use a
rechargeable battery.
• Do not allow any battery or its holder to contact metal objects such as keys
or coins.
RECYCLING: Your product and batteries must be recycled or disposed of properly.
Contact your local recycling center for information on proper disposal.
18
Regulatory Notices
Industry Canada Radio Equipment
The term “IC:” before the radio certification number only signifies that Industry Canada
technical specifications were met. Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
“Privacy of communications may not be ensured when using this telephone.” This
product meets the applicable Industry Canada technical specifications of the RSS210.
EN
20
Limited Warranty
This warranty covers defects in materials and workmanship of products manufactured, sold or certified by
Plantronics which were purchased and used in the United States and Canada.
The warranty lasts for one year from the date of purchase of the products.
This warranty extends to you only if you are the end user with the original purchase receipt.
We will, at our option, repair or replace the products that do not conform to the warranty. We may use functionally equivalent reconditioned/refurbished/remanufactured/pre-owned or new products or parts.
To obtain service in the U.S., contact Plantronics at 1-866-363-BLUE (2583). To obtain service in Canada call
(800) 540-8363.
THIS IS PLANTRONICS’ COMPLETE WARRANTY FOR THE PRODUCTS.
This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.
Please contact your dealer or our service center for the full details of our limited warranty, including items not
covered by this limited warranty.
EN
13
345 Encinal
Santa Cruz, CA 95060
United States
Tel: 800-544-4660
www.plantronics.com
©2008 Plantronics, Inc. All rights reserved. Plantronics, the logo design, Vopyager, QuickPair, and Sound Innovation
are trademarks or registered trademarks of Plantronics, Inc. The Bluetooth® word mark and logos are owned by
the Bluetooth SIG, Inc. and any use of such marks by Plantronics, Inc. is under license. All other trademarks are the
property of their respective owners.
US Patents Pending.
xxxxx-xx (10/09)

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Tagged PDF                      : No
XMP Toolkit                     : 3.1-701
Create Date                     : 2008:09:23 21:53:09-07:00
Metadata Date                   : 2008:11:13 14:47:54+08:00
Modify Date                     : 2008:11:13 14:47:54+08:00
Creator Tool                    : Adobe InDesign CS3 (5.0)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 4505 bytes, use -b option to extract)
Instance ID                     : uuid:ce55bdbe-6c61-4367-8e89-b4f99c9dfca7
Document ID                     : adobe:docid:indd:118ae075-8965-11dd-add5-b5e4f1dea158
Rendition Class                 : proof:pdf
Derived From Instance ID        : fda298ad-88ea-11dd-bca4-ccd7d5dcde91
Derived From Document ID        : adobe:docid:indd:fda298a7-88ea-11dd-bca4-ccd7d5dcde91
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Y Resolution    : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:811FA379306611DCB9E495187C5D63B5, uuid:e78a8916-d7c7-11db-94d4-000d932f0ba6, uuid:2b95b4de-370f-11dc-bc6f-0017f208a330, uuid:19782aac-370f-11dc-bc6f-0017f208a330, uuid:1bf4377b-12fa-4809-9c26-d01e28be15ef, uuid:1e2c568b-b124-4d20-b31e-6e458cd81b70, uuid:b83dd794-db75-11dc-b290-001451639cf7, uuid:c672f3fb-dd70-4657-8d1a-3b10778a69d4, uuid:3FC8834CFF4BDC11B2E68B2565A237E6, uuid:811FA379306611DCB9E495187C5D63B5
Manifest Reference Document ID  : uuid:811FA378306611DCB9E495187C5D63B5, uuid:CF21B9A5D91B11DB9960D08594697DE2, uuid:002FF408386111DC88C6DD0975556A4D, uuid:002FF404386111DC88C6DD0975556A4D, uuid:BB1951C1B567DC11A6A4CD2D04ABB9BB, uuid:BF1951C1B567DC11A6A4CD2D04ABB9BB, uuid:FCF6B609DCC411DC841386542D5A41B8, uuid:BD1951C1B567DC11A6A4CD2D04ABB9BB, uuid:28B42695313B11DC95A6DDC1231FB446, uuid:811FA378306611DCB9E495187C5D63B5
Format                          : application/pdf
Producer                        : Adobe PDF Library 8.0
Trapped                         : False
Has XFA                         : No
Page Count                      : 23
Creator                         : Adobe InDesign CS3 (5.0)

EXIF Metadata provided by EXIF.tools