Plantronics WH200 Wireless Communications System Headset User Manual

Plantronics Inc Wireless Communications System Headset Users Manual

Users Manual

Versa VS22M Professional Wireless Headset System Quick Start Guide
1Versa VH22 HeadsetVersa Base1. Listening Volume (also controls mute and flash functions)2. Call Control Button3. Indicator Light 4. Noise-Canceling Boom5. Ear tips6. Charge Cradle642351. Master Speaking Volume2. Configuration Switch 3. Master Listening Volume 4. Subscription Button and Indicator Light5. Power/Charging Indicator Light 6. Power Jack7. Handset Lifter Jack 8. Telephone Interface Cable Jack 9. USB Port 10. Desk phone Talk Button and Indicator Light 11. PC Talk Button and Indicator Light Base Power SupplyTelephone Interface Cable1067811942315AudioCentral Software/Interactive User Guide CDUSB Cable
2-12-22-31
3-13-246-66-4 6-55-57-1 7-2
WelcomeCongratulations on purchasing your new Plantronics product. This Quick Start Guide contains instructions for setting up the Versa VS22M Professional Wireless Headset System. Please refer to the printable user guide located on the AudioCentral Software/Interactive User Guide CD for further details on how to use your system.Safety Instructions Do not use headphones / headsets at high volumes for an extended period of time. Doing so can cause hearing loss. Always listen at moderate levels. See www.plantronics.com/healthandsafety for more information on headsets and hearing.
Setting Up the Versa VS22M 1. Attaching Charge Cradle to BaseConnect the headset charge cradle to the base. Push firmly on the cradle until the cradle snaps into place.2. Connecting Base to Desk Phone2-1. Connect the telephone interface cable to the telephone interface cable jack on the base.2-2. After disconnecting the handset coil cord from the desk phone, connect the telephone interface cable to the now open handset port on the desk phone.2-3. Connect the handset coil cord to the telephone interface cable junction box.3. Connecting Power Supply to Base3-1. Connect the base power supply into the power jack on the base. 3-2. Connect the power supply to outlet. 4. Docking and Charging Headset Gently push the headset into the charge cradle. Charge for at least 20 minutes prior to the first use. A full charge takes 3 hours. 5. Checking Configuration5-1. Set volume on desk phone to mid-range.5-2. Remove handset from desk phone cradle.5-3. With your headset on, press the call control button on the headset.5-4. Listen for a normal dial tone. If you hear a dial tone and the dial tone sounds normal continue with Step 6 “Making a Test Call with Desk Phone”.CHARGING TIME20 min ..................... Minimum charge before first use3 hours ................... Full charge
5-5. If you do not hear a dial tone or the dial tone is distorted adjust the configuration switch until the dial tone sounds normal. NOTE Multiple settings might work with your phone; however, only one is the optimal position.6. Making a Test Call with Desk Phone6-1. Remove handset from desk phone cradle.6-2. With your headset on, press the call control button on the headset.6-3. Dial the number using your desk phone.6-4. Adjust the master speaking volume on base to the best setting for your listener. A setting of 3 or 4 is ideal. 6-5. Adjust the master listening volume on base. A setting of 2 or 3 is ideal. 6-6. You can fine tune the listening volume on the headset.6-7. To end the test call, press the call control button on the headset and replace the handset into the desk phone cradle.7. Connecting to the PC7-1. Connect the USB cable to the USB port on the back of the base.7-2. Connect the other end of the USB cable to the USB port on the PC.7-3. Insert the AudioCentral Software/Interactive User Guide CD and download the AudioCentral software from the Wizard. Follow the installation instructions shown on your PC.8. Making a Test Call with PC8-1 Ensure the AudioCentral software is running on your PC.8-2 With your headset on, press the PC talk button on the base.8-3 Dial the number using your softphone application.8-4 Adjust listening and speaking volume using your softphone application and/or “sound and audio devices” in your PC control panel.8-5 You can fine tune the listening volume on the headset.8-6 To end the test call, press the call control button on the headset.Please refer to the printable user guide located on the AudioCentral Software/Interactive User Guide CD for further details on how to use your Versa VS22M Professional Wireless Headset System.
МЛ05Plantronics, Inc.345 Encinal StreetSanta Cruz, CA 95060United StatesTel: 800-544-4660Tel: 831-426-5858www.plantronics.com©2008 Plantronics, Inc. All rights reserved. Plantronics, the logo design, CS50, CS55. IntelliStand, and Sound Innovation are trademarks or registered trademarks of Plantronics, Inc. All other trademarks are the property of their respective owners.US patents 5,210,791; 6,735,453; 6,903,693; D492,667; Australia 303306; EM 293964; 69109; Patents Pending.80531-07 (08.08)This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:1. This device may not cause harmful interference, and2. This device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gener-ates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equip-ment does cause harmful interference to radio or television reception which can be determined by turning the radio or television off and on, the user is encouraged to try to correct interference by one or more of the following measures:1. Reorient or relocate the receiving antenna.2. Increase the separation between the equipment and receiver.3. Connect the equipment into an outlet on another circuit. 4. Consult the dealer or an experienced radio/TV technician for help.FCC REGISTRATION INFORMATION — Part 68This equipment complies with Part 68 of the FCC rules and the requirements adopted by ACTA. On the exterior of this equipment is a label that contains a product identifier in the format US:AAAEQ##TXXXX. If requested, this information must be provided to your telephone company.A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible jack that is also compliant. See installation instructions for details.The REN is useful to determine the quantity of devices you may connect to your telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most, but not all areas, the sum of the RENs should not exceed five (5.0). To be certain of the number of devices you may connect to your line, as determined by the REN, contact your local telephone company. For product approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ### are the REN without the decimal point. (For example, 03 represents a REN of 0.3.) For earlier producers, the REN is separately shown on the label.If this telephone equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn’t practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the proper functioning of your equipment. If they do, you will be notified in advance in order for you to make necessary modifications to maintain uninterrupted service.If trouble is experienced with this unit, for repair or warranty information, please contact customer service at (800) 544-4660. If the equip-ment is causing harm to the network, the telephone company may request that you disconnect the equipment until the problem is resolved.DO NOT DISASSEMBLE THIS EQUIPMENT: it does not contain any user serviceable components.We recommend the installation of an AC surge arrester in the AC outlet to which this equipment is connected. Telephone companies report that electrical surges, typically lighting transients, are very destructive to customer terminal equipment connected to AC power sources.Exposure to RF RadiationThe internal wireless radio operates within the guidelines found in radio frequency safety standards and recommendations, which reflect the consensus of the scientific community. Independent studies have shown that the internal wireless radio is safe for use by consumers. Visit www.plantronics.com for more information.NOTE: Modifications not expressly approved by Plantronics, Inc. could void the user’s authority to operate the equipment.

Navigation menu