Plastoform BIGBLUEPARTY Bluetooth Speaker User Manual big blue party

Plastoform Industries Ltd. Bluetooth Speaker big blue party

user manual

User Manual BIG BLUE PARTY Bluetooth Wireless Speaker
FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the distance between the equipment and receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This equipment may not cause harmful interference. 2. This equipment must accept any interference received, including interference that may cause undesired operation. Modifications not authorized by the manufacturer may void the user’s authority to operate this device. Canada Statement ThisdevicecomplieswithIndustryCanadalicence‐exemptRSSstandard(s).Operationissubjecttothefollowingtwoconditions:(1)thisdevicemaynotcauseinterference,and(2)thisdevicemustacceptanyinterference,includinginterferencethatmaycauseundesiredoperationofthedevice.Changesormodificationstoyourdevicenotexpresslyapprovedbythepartyresponsibleforcompliancecanvoidtheuser’sauthoritytooperatetheequipment.CetappareilestconformeavecIndustrieCanadaexemptsdelicencestandardRSS(s).Sonfonctionnementestsoumisauxdeuxconditionssuivantes:(1)cetappareilnedoitpasprovoquerd'interférenceset(2)cetappareildoitacceptertouteinterférence,ycompriscellespouvantcauserunmauvaisfonctionnementdel'appareil.Lesmodificationsapportéesàvotreappareiletnonexpressémentapprouvésparlapartieresponsabledelaconformitépeuventannulerledroitdel'utilisateuràutiliserl'équipement.

Set up 1. Connect the AdApter’s jack to the power port on the back of Big BlueParty. 2. plug the AdApter into an electrical outlet. pairing your Device 1. prepare your device to pair using Bluetooth®, making sure you are within 33 feet of Big Blue Party. refer to your device’s owners manual for details if necessary. 2. If Big Blue Party is off, press the power Button until the Led rIng starts flashing. If Big Blue Party is already on, press and hold the power Button until the Led rIng starts flashing. 3. Big Blue Party is in pairing mode when the Led rIng is flashing. Big Blue Party will wait for a connection in pairing mode for up to 3 minutes. 4. once Big Blue Party is in pairing mode and your device is ready to pair, select “Big Blue Party”. If prompted, use 0000 as a pIn for the pairing code. 5. once Big Blue Party is selected, the Led rIng will change to solid blue and a tone will sound to confirm pairing is complete. Notes:• To cancel the pairing mode you may either press the Power button,a tone will sound and Big Blue Party will shut off, or wait the 3 minutes for Big Blue Party to cancel pairing automatically. The LED RING will return to solid blue and the unit will remain on.• NFC PAIRING USING ONE TOUCH 1. Turn on the NFC function on your device. Make sure your device is in the wake-up mode. 2.Touch the unit’s NFC sensing area with your device, the unit will then power on and pair to
your device. Using Big BlUe Party after Pairing 1.Press and hold the PowER BuTToN until the LED RING illuminates solid. A tone will sound. 2.Big Blue Party should automatically remember you.Depending upon your device,you may have to select “Big Blue Party” in your device’s menu. 3.To turn Big Blue Party off, press the Power button. A tone will sound and the LED RING will shut off. Adjusting volume 1. Adjust the volume of Big Blue Party’s sound by its touch-sensitive controls. They are located on the top of the cabinet over the Power BUTToN. 2.Tap the + or — icons to slowly increase/decrease the volume or place your finger on the symbols continuously to increase/decrease the volume at an accelerated rate. The LeD rING will flash during volume adjustment. Adjusting Bass And Treble To fine-tune your audio depending on what type of music you’re listening to through Big Blue Party, you may adjust the Bass or Treble by turning the knobs on the back of the cabinet. LED RING ON/OFF To control the Led ring light, press the Led oN/oFF BUTToN on the back of the cabinet. ConneCting other stereo Components You can connect your audio device to the speaker with a 3.5mm mini-jack cable (not included).
1. Plug one end of the cable into your audio device, just like you would a pair of headphones. 2. Plug the other end of the cable into the Big Blue Party 3.5mm port labeled AUX IN. 3. Use your audio device to control music playback and volume through Big Blue Party. Note: If a device is currently paired with Bluetooth®, that device takes precedence over a wired device connection. You must first disconnect the Bluetooth® connection on your device to utilize the AUX IN function. OUTPUTTING SOUND Connect other equipment or speakers by using audio cords with mini jacks (not included) to the AUX OUT JACK on the back of Big Blue Party. Note: AUX OUT can only be used when a device is paired with Big Blue Party via Bluetooth®.

Navigation menu