Polaris 2879316 Wireless Remote User Manual wireless remoter menual

Polaris Industries Inc. Wireless Remote wireless remoter menual

User Manual

Manual Windlass wireless remoter manual 1. Picture 2. Operation 1） Matching address code Press the matching switch and the light turns on, then press IN key or OUT key. The receiver will save the address. Not need the matching in normal using. 2） Operation Hold the POWER key for about 3 seconds to turn on or turn off the system, then press the IN or OUT key to operate the windlass, the light will display the state. The system will be turned off in 2 minutes with no operation. 3）Valid distance:≥100 inches。 4）Disturbance：The remote distance will change with ambient interference. 3. Performances （1）Remoter: No. Content Performance 1 Work voltage DC12V/23A one cell 2 Static current ≤0.1UA 3 Work current ≤10MA 4 Transmitting power ≤10MW 5 Transmitting frequency 315MHZ 6 Modulation method ASK 7 Coding method Learning code 8 Transmitting intensity +8db （2）Receiver: No. Content Performance 1 Work voltage DC7-15V 2 Static current ≤10MA 3 Work current 10A 4 Receiving sensitivity -108dbm 5 Receiving frequency 315MHZ 6 Coding method Learning code 7 Responding speed ≤0.1S 四、Excellent feature： 1）Matching address code and operation method is easy, 2）Good anti-jamming ability and long remote distance； 3）Low standby power for remoter(zero power), 4）Fast responding speed, Fast turn off. Because the high anti-disturb performance. Notes: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates uses and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one or more of the followingmeasures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.-- Consult the dealer or an experienced radio/TV technician for help. Manual

Navigation menu