Polaris Outlaw 9922485 Owners Manual ManualsLib Makes It Easy To Find Manuals Online!

2014-12-11

: Polaris Polaris-Outlaw-9922485-Owners-Manual-121001 polaris-outlaw-9922485-owners-manual-121001 polaris pdf

Open the PDF directly: View PDF .
Page Count: 191

Download
Open PDF In Browser	View PDF

WARNING
The engine exhaust from this
product contains chemicals known
to the State of California to cause
cancer, birth defects or
other reproductive harm.
A card containing important ATV safety information should be attached to the
owner's manual on the next page. If you cannot locate this card, or if it has been
removed, please call 1-800-342-3764 for assistance.

Pantone 426C

WARNING

NEVER operate:
S without proper training or instruction
S at speeds too fast for your skills or the conditions
S on public roads - a collision can occur with
another vehicle
S with a passenger - passengers affect balance
and steering and increase risk of losing control

Improper vehicle use can result in
SEVERE INJURY or DEATH.

ALWAYS USE
AN APPROVED
HELMET AND
PROTECTIVE
GEAR

NEVER USE
ON PUBLIC
ROADS

NEVER CARRY
PASSENGERS

NEVER USE
WITH DRUGS
OR ALCOHOL

READ OWNER'S MANUAL.
FOLLOW ALL INSTRUCTIONS AND WARNINGS.

ALWAYS:
S use proper riding techniques to avoid vehicle
overturns on hills and rough terrain and in turns
S avoid paved surfaces - pavement may
seriously affect handling and control

For your nearest Polaris dealer, call 1-800-POLARIS
or visit www.polarisindustries.com
Polaris Sales Inc., 2100 Hwy 55
Medina, MN 55340
Phone 1-888-704-5290
Part No. 9922485 Rev 02
Printed in USA

Visit us at www.polarisindustries.com

POLARIS and POLARIS THE WAY OUT are registered trademarks of Polaris Industries Inc.
Copyright 2009 Polaris Sales Inc. All information contained within this publication is based on the latest product
information at the time of publication. Due to constant improvements in the design and quality of production
components, some minor discrepancies may result between the actual vehicle and the information presented in
this publication. Depictions and/or procedures in this publication are intended for reference use only. No liability
can be accepted for omissions or inaccuracies. Any reprinting or reuse of the depictions and/or procedures contained within, whether whole or in part, is expressly prohibited.
Printed in USA
2010 Outlaw 50 ATV Owner's Manual P/N 9922485

Welcome
Dear Parents:
We believe your children should have the opportunity to enjoy The Way Out experience
along with you. We've provided this owner's manual to assist you and your children in learning about safe operation and care of your new ATV.
A Polaris ATV is not a toy and can be hazardous to operate. Make sure any child who will
operate the ATV takes a training course before operating the ATV. Make sure all operators
understand and follow all of the instructions and warnings contained in this owner’s manual.
Help them also learn to show respect for our environment and for the rights of others while
operating the ATV.
Never allow a child under the age of 16 to operate an ATV without adult supervision. Children differ in skills, physical abilities and judgement. Some children may not be able to operate an ATV safely. Permit continued use only if you determine that your child has the ability
and maturity to operate the ATV safely.
The preventive maintenance program outlined in this manual is designed to ensure that all
critical components on your child's ATV are thoroughly inspected at specific intervals. Follow all of the instructions and recommendations in this manual.

Welcome
Dear Children:
Before you ride your new Polaris ATV, there are some important things that you need to
know. You must learn how to keep yourself and those around you safe while you're riding.
Your parents and Polaris want you to enjoy riding your new ATV, and that's why you need to
read and understand the information in your owner's manual. You must also take an ATV
training course before you begin riding.
Ask your parents to explain anything you don't understand, and pay close attention to the
warnings and instructions you read. Your safety and the safety of others is the most important
thing to think about at all times. Never drive your ATV alone. Always make sure an adult is
watching you when you ride.
Drive safely and enjoy riding your new Polaris ATV!

Table of Contents
Introduction. . . . . . . . . . . . . . . . . 6
Safety . . . . . . . . . . . . . . . . . . . . . . 8
Youth Section . . . . . . . . . . . . . . 39
Know Your ATV . . . . . . . . . . . 40
Pre-Ride Check . . . . . . . . . . . 47
Riding Rules . . . . . . . . . . . . . 50

Adult Section. . . . . . . . . . . . . . . 55
Vehicle ID Numbers. . . . . . . . 56
Features and Controls . . . . . . 57
Operation. . . . . . . . . . . . . . . . 70
Emission Control Systems. . . 92
Maintenance . . . . . . . . . . . . . 94
Specifications . . . . . . . . . . . 156
Polaris Products . . . . . . . . . 158
Troubleshooting . . . . . . . . . . 160
Declaration of Conformity . . 166
Warranty . . . . . . . . . . . . . . . 169
Maintenance Log . . . . . . . . . 181
Index. . . . . . . . . . . . . . . . . . . . . 185

Introduction
Safety Words and Symbols
The following signal words and symbols appear throughout this manual and on your vehicle.
Your safety is involved when these words and symbols are used. Become familiar with their
meanings before reading the manual.
The safety alert symbol indicates a potential
personal injury hazard.

WARNING
A WARNING indicates a hazardous situation
which, if not avoided, may result in death or
serious injury.

CAUTION
A CAUTION indicates a hazardous situation
which, if not avoided, may result in minor or
moderate injury.

NOTICE
A NOTICE indicates a situation that may result in
property damage.

The Prohibition Safety Sign indicates
an action NOT to take in order to avoid
a hazard.
The Mandatory Action Sign indicates
an action that NEEDS to be taken to
avoid a hazard.

Introduction
WARNING
Failure to follow the warnings and safety precautions contained in this manual can result in severe
injury or death. A Polaris ATV is not a toy and can be hazardous to operate. This vehicle handles
differently than other vehicles, such as motorcycles and cars. A collision or rollover can occur quickly,
even during routine maneuvers like turning, or driving on hills or over obstacles, if you fail to take
proper precautions.
• Read this owner’s manual. Understand all
• Always follow the age guidelines for your
safety warnings, precautions and operating
vehicle. Y-12 90cc models are designed for
procedures before operating a Polaris ATV.
children not less than 12 years of age and Y-6
Keep this manual with the ATV.
50cc models are designed for children not less
than 6 years of age. No child under the age of
• Never operate an ATV without proper
16 should ride any ATV designed and sold for
instruction. Take a training course.
an adult.
• Never permit a guest to operate the ATV
unless the guest has read this manual and all
product labels and has completed a certified
safety training course.

Safety
Safety Training
ATV safety training is a top priority for
Polaris. Polaris strongly encourages you and
any family members who will be riding the
ATV to take a training course.
If you purchased a new Polaris ATV in the
United States, your dealer provided
instruction to you about the authorized ATV
RiderCoursesm that is available to you and
your eligible family members. This training
is included in the purchase price of your
ATV.

In addition, you were provided with printed
material and a video or DVD that instructs
operators on safe operating procedures. You
should review this information with your
child on a regular basis. Do not allow other
children to ride this ATV unless they have
read the manual, seen the instructional
video or DVD and taken and completed an
approved ATV safety training course.

Safety
Safety Training
If you purchased a used Polaris ATV in the
United States, you can enroll in the ATV
RiderCoursesm for a fee. Call ATV
Enrollment Express at (800) 887-2887 or
visit www.atvsafety.org.
If you purchased a Polaris ATV outside the
United States, please contact your dealer or
local law enforcement agencies for information about safety training.

FOR MORE INFORMATION ABOUT ATV
SAFETY, call the Consumer Product
Safety Commission at 1-800-638-2772, or
visit www.cpsc.gov, visit
www.atvsafety.org, or call Polaris at 1800-342-3764.

Safety
Riding Gear
Always wear clothing suited to the type of riding. ATV
riding requires special protective clothing for comfort
and to reduce the chance of injury.

Helmet

Long
Sleeves

Helmet

Wearing a helmet can prevent a severe head injury.
Whenever riding a Polaris vehicle, always wear a helmet
that meets or exceeds established safety standards.
Approved helmets in the USA and Canada bear a U.S.
Department of Transportation (DOT) label.
Approved helmets in Europe, Asia and Oceania bear the
ECE 22.05 label. The ECE mark consists of a circle surrounding the letter E, followed by the distinguishing
number of the country which has granted approval. The
approval number and serial number will also be displayed on the label.

Eye
Protection

Long Pants

Boots

E4
051039
0006.31

Gloves

Safety
Riding Gear
Eye Protection

Do not depend on eyeglasses or sunglasses for eye protection. Whenever riding a Polaris
vehicle, always wear shatterproof goggles or use a shatterproof helmet face shield. Polaris
recommends wearing approved Personal Protective Equipment (PPE) bearing markings such
as VESC 8, V-8, Z87.1, or CE. Make sure protective eye wear is kept clean.
Gloves

Off-road style gloves with knuckle pads are the best for comfort and protection.
Boots

The best footwear is a pair of strong over-the-calf boots with low heels.
Clothing

Always wear long sleeves and long pants to protect arms and legs. Riding pants with kneepads and a jersey with shoulder pads provide the best protection.

Safety
Equipment Modifications
We are concerned for the safety of our customers and for the general public. Therefore, we
strongly recommend that consumers do not install on a Polaris ATV any equipment that may
increase the speed or power of the vehicle, or make any other modifications to the vehicle for
these purposes. Any modifications to the original equipment of the vehicle create a substantial safety hazard and increase the risk of bodily injury.
The warranty on your Polaris ATV is terminated if any equipment has been added to the
vehicle, or if any modifications have been made to the vehicle, that increase its speed or
power.
The addition of certain accessories may change the handling characteristics of the ATV. Use
only Polaris-approved accessories, and familiarize yourself with their function and effect on
the ATV.

Safety
Safety Warnings
WARNING
Failure to operate the ATV properly can result in a collision, loss of control, accident or overturn, which
may result in serious injury or death.
Be sure to read all of the following warnings about driving hazards and how to avoid them. These
warnings are provided for your child's safety. Be sure to explain to your young driver that the hazards
outlined in this section of the owner’s manual MUST be avoided at all times. See the RIDING RULES
section and the OPERATION section of the owner’s manual for proper operating procedures.

Operator Restrictions/Age Restrictions
This vehicle is for recreational use by young operators under
adult supervision ONLY.
Operation is prohibited for anyone under 6 years of age.

UNDER

Safety
Safety Warnings
Operating Without Instruction
Operating this ATV without proper instruction increases the risk of an
accident. The operator must understand how to operate the ATV
properly in different situations and on different types of terrain.
Beginning and inexperienced operators should complete an ATV
training course. They should then regularly practice the skills learned
in the course and the operating techniques described in the Owner's
Manual. See page 8.
Never permit a guest to operate the ATV unless the guest has read
this manual and all product labels and has completed a certified
safety training course.

Safety
Safety Warnings
Handling Gasoline

Exposure to Exhaust

Gasoline is highly flammable and explosive
under certain conditions.
• Never allow a child to refuel or handle
gasoline.
• Always exercise extreme caution whenever
handling gasoline.
• Always refuel with the engine stopped, and
outdoors or in a well ventilated area.
• Do not smoke or allow open flames or sparks
in or near the area where refueling is
performed or where gasoline is stored.
• Do not overfill the tank. Do not fill the tank
neck.
• If gasoline spills on your skin or clothing,
immediately wash it off with soap and water
and change clothing.
• Turn the fuel valve off whenever the ATV is
stored or parked. See page 66.

Engine exhaust fumes are poisonous and can
cause loss of consciousness or death in a short
time. Never start the engine or let it run in an
enclosed area.
The engine exhaust from this product contains
chemicals known to cause cancer, birth defects
or other reproductive harm. Operate this vehicle
only outdoors or in well-ventilated areas.

Safety
Safety Warnings
Failure to Inspect Before Operating

Protective Apparel

Failure to inspect and verify that the ATV is in
safe operating condition before operating
increases the risk of an accident. Always inspect
the ATV before each use to make sure it's in safe
operating condition. Always follow all inspection
and maintenance procedures and schedules
described in the owner's manual.

Operating this ATV without wearing an approved
helmet increases the risk of a serious head injury
in the event of an accident. Operating without
eye protection could result in an accident and
could increase the chance of a serious injury in
the event of an accident.
Always wear an
approved helmet
that fits properly.
Always wear eye
protection (goggles
or face shield),
gloves, boots, a
long-sleeved shirt
or jacket and long
pants.

Safety
Safety Warnings
Carrying a Passenger

Using Alcohol or Drugs

Carrying a passenger greatly reduces the
operator's ability to balance and control the ATV,
which may result in an accident or overturn.
Never carry a passenger on this ATV.

Operating the ATV after consuming alcohol or
drugs could adversely affect operator judgment,
reaction time, balance and perception. Never
consume alcohol or drugs before or while
operating an ATV.

Safety
Safety Warnings
Operating on Pavement

Operating on Public Roads

Operating an ATV on paved surfaces (including
sidewalks, paths, parking lots and driveways)
may adversely affect the handling of the ATV and
could result in loss of control and accident or
overturn. Avoid operating the ATV on pavement.
ATV tires are designed for off-road use. If it's
unavoidable, travel slowly and avoid sudden
turns or stops.

Operating this ATV on public streets, roads or
highways could result in a collision with another
vehicle. Never operate the ATV on any public
street, road or highway, including dirt and gravel
roads. In many states it's unlawful to operate
ATVs on public streets, roads and highways.

Safety
Safety Warnings
Operating at Excessive Speeds

Physical Control of the ATV

Operating the ATV at excessive speeds
increases the operator's risk of losing control.
Always operate at a speed that's appropriate for
the terrain, the visibility and operating conditions,
and your experience.

Removing a hand from the handlebars or feet
from the footrests during operation can reduce
your ability to control the vehicle or cause loss of
balance and ejection from the ATV. If the
operator's foot is not firmly planted on the
footrest, it could also contact the rear wheels.
Never remove your hands from the handlebars
while operating, and always keep both feet on
the footrests.

Safety
Safety Warnings
Turning Improperly

Jumps and Stunts

Turning improperly could cause loss of traction,
loss of control, accident or overturn. Always
follow proper procedures for turning as described
in the owner's manual.
Never turn abruptly or at sharp angles. Never
turn at high speeds. Practice turning at slow
speeds before attempting to turn at faster
speeds.

Attempting wheelies, jumps and other stunts
increases the risk of an accident or overturn.
Never attempt wheelies, jumps, or other stunts.
Avoid exhibition driving.

Safety
Safety Warnings
Improper Hill Climbing

Operating on Steep Hills

Improper hill climbing could cause loss of control
or overturn. Always follow proper procedures for
climbing hills as described in the owner's
manual. See page 82.

Operating on excessively steep hills could cause
an overturn. Never operate on hills too steep for
the ATV or for your abilities. Never operate the
ATV on hills steeper than 15 degrees.

>15°

Safety
Safety Warnings
Descending Hills Improperly
Improperly descending a hill could cause loss of control or overturn.
• Always follow proper procedures for traveling down hills as described in the owner's manual. NOTE:
A special technique is required when braking while traveling downhill. See page 85.
• Always check the terrain carefully before descending a hill.
• Shift your weight rearward.
• Never travel down a hill at high speed.
• Avoid traveling down a hill at an angle, which would cause the vehicle to lean sharply to one side.
Travel straight down the hill when possible.

Safety
Safety Warnings
Crossing Hillsides
Driving on a sidehill is not recommended. Improper procedure
could cause loss of control or overturn. Avoid crossing the
side of any hill unless absolutely necessary.
If crossing a hillside is unavoidable, always follow proper
procedures as described in the owner's manual. See page 84.
Never attempt to turn the ATV around on any hill until you've
mastered the turning technique (on level ground) as
described in the owner's manual. See page 86.

Safety
Safety Warnings
Stalling While Climbing a Hill
Stalling, rolling backwards or improperly dismounting while
climbing a hill could cause an overturn.
Always maintain a steady speed when climbing a hill.
If all forward speed is lost
If you lose all forward speed: Keep your weight uphill. Apply the
front brakes gradually (right lever). When fully stopped, apply the
rear brake as well (left lever) and then lock the parking brake.
If the ATV begins rolling downhill: Keep weight uphill. Never apply
engine power. Never apply the rear brake while rolling
backwards. Apply the front brake slowly. When fully stopped,
apply rear brake as well, and then lock the parking brake.
Dismount on uphill side, or to either side if pointed straight uphill.
Turn the ATV around and remount, following the procedure
described in the Owner's Manual. See page 86.

Safety
Safety Warnings
Operating on Slippery Terrain
Failure to use extra caution when operating on excessively
rough, slippery or loose terrain could cause loss of traction,
loss of control, accident or overturn.
Do not operate on excessively rough, slippery or loose terrain
until you've learned and practiced the skills necessary to
control the ATV on such terrain.
Always use extra caution on rough, slippery or loose terrain.

Safety
Safety Warnings
Operating in Unfamiliar Terrain

Improper Tire Maintenance

Failure to use extra caution when operating on
unfamiliar terrain could result in an accident or
overturn. Unfamiliar terrain may contain hidden
rocks, bumps, or holes that could cause loss of
control or overturn.
Travel slowly and use extra caution when
operating on unfamiliar terrain. Always be alert to
changing terrain conditions.

Operating this ATV with improper tires or with
improper or uneven tire pressure could cause
loss of control or accident.
Always use the size and type of tires specified for
your ATV. Always maintain proper tire pressure
as described in the owner's manual and on
safety labels.

Safety
Safety Warnings
Improper Vehicle Modifications

Operating Over Obstacles

Improper installation of accessories or
modification of the ATV may cause changes in
handling, which could cause loss of control or an
accident.
Never modify the ATV through improper
installation or use of accessories. All parts and
accessories added to the vehicle must be
genuine Polaris Industries Inc. or equivalent
components designed for use on this ATV and
should be installed and used according to
approved instructions. See your authorized
Polaris ATV dealer for more information.

Improperly operating over obstacles could cause
loss of control or overturn.
Before operating in a new area, check for
obstacles. Avoid operating over large obstacles
such as rocks and fallen trees. If unavoidable,
use extreme caution and always follow proper
operating procedures as outlined in this manual.

Skidding or Sliding
Skidding or sliding can cause loss of control or
overturn (if tires regain traction unexpectedly).
On slippery surfaces such as ice, travel slowly
and use extra caution to reduce the chance of
skidding or sliding.

Safety
Safety Warnings
Operating Through Deep Water
Operating the ATV through deep or fast-flowing water could cause the tires to float, causing loss of
control or overturn. Avoid operating through deep or fast-flowing water. If it's unavoidable to enter water
that exceeds the height of the footrests:
• Travel slowly.
• Balance your weight carefully.
• Avoid sudden movements.
• Maintain a slow and steady forward motion. Do not make sudden turns or stops, and do not make
sudden throttle changes.
• Wet brakes may have reduced stopping ability. After leaving water, test the brakes. Apply them
lightly several times while driving. The friction will help dry out the pads.

Safety
Safety Warnings
Improper Cargo Loading
Overloading the ATV or carrying/towing cargo may cause
changes in handling, which could cause loss of control or
an accident. Never haul cargo or tow a load with this ATV.
Never tow or pull an object behind the ATV. A wagon, sled
or other towed object does not have brakes or steering.
The object may overturn or collide with other objects.
Never exceed the stated load capacity for this ATV.

Safety
Safety Warnings
Operating on Frozen Bodies of Water

Physical Skills

Operating on frozen bodies of water may result in
serious injury or death if the ATV and/or the
operator fall through the ice. Never operate the
ATV on a frozen body of water.

Safe operation of this rider-active vehicle
requires good judgement and physical skills.
Persons with cognitive or physical disabilities
who operate this vehicle have an increased risk
of overturn and loss of control.

Operating a Damaged ATV
Operating a damaged ATV can result in an
accident. After any overturn or accident, have a
qualified service dealer inspect the entire
machine for possible damage, including (but not
limited to) brakes, throttle and steering systems.

Safety
Safety Warnings
Hot Exhaust Systems

Unauthorized Use of the ATV

Exhaust system components are very hot during
and after use of the vehicle. Hot components can
cause burns and fire. Do not touch hot exhaust
system components. Always keep combustible
materials away from the exhaust system.
Use caution when traveling through tall grass,
especially dry grass. Always inspect the
underside of the ATV after driving through tall
grass, weeds, brush and other tall ground cover.
Promptly remove any grass or debris clinging to
the vehicle.

Leaving the keys in the ignition can lead to
unauthorized use of the vehicle, which could
result in an accident or overturn. Always remove
the ignition key when the vehicle is not in use.

Safety
Safety Labels and Locations
Warning labels have been placed on the vehicle for your protection. Read and follow the
instructions on each label carefully. If any of the labels shown in this manual differ from the
labels on your vehicle, always read and follow the instructions of the labels on the vehicle.
If an informational or graphic label becomes illegible or comes off, contact your Polaris
dealer to purchase a replacement. Replacement safety labels are provided by Polaris at no
charge. The part number is printed on the label.
Discretionary Warning
WARNING
Never operate this ATV on HILLS steeper than 15 degrees
15°.
To prevent overturn on hilly terrain, use throttle and brakes gradually
and shift weight uphill.

Safety
Safety Labels and Locations
Operation Warning
WARNING
Improper ATV use can result in SEVERE INJURY OR DEATH.
Always use an approved helmet and protective gear. Never use on public
roads. Never carry passengers. Never use with drugs or alcohol.
NEVER operate: without proper training or instruction; at speeds too fast
for your skills or the conditions; on public roads - a collision can occur
with another vehicle; with a passenger - passengers affect balance and
steering and increase risk of losing control.
ALWAYS: use proper riding techniques to avoid vehicle overturns on hills
and rough terrain and in turns; avoid paved surfaces - pavement may
seriously affect handling and control.
LOCATE AND READ OWNER'S MANUAL. FOLLOW ALL
INSTRUCTIONS AND WARNINGS.

7175376

Safety
Safety Labels and Locations
Age Warning
WARNING
Operation of this ATV by children under the age of
6 increases the risk of severe injury or death.
Adult supervision required for children under age
16.
NEVER permit children under age 6 to operate
this ATV.
7175372

Safety
Safety Labels and Locations
Tire Pressure Warning
WARNING
Improper tire pressure or overloading can
cause loss of control.
Loss of control can result in severe injury or
death.
• Cold tire pressure:
Front: 2.0 psi (13.8 kPa)
Rear: 2.0 psi (13.8 kPa)
• Maximum Weight Capacity 90 lbs. (41 kg)

7176085

Safety
Safety Labels and Locations
No Passenger Warning
WARNING
NEVER ride as a passenger.
Passengers can cause a loss of control,
resulting in SEVERE INJURY or DEATH.
7175378

Safety
Safety Labels and Locations
Clutch Cover Warning
WARNING
NO STEP
• Moving parts hazard under belt-clutch
guard. To prevent serious injury, do not
operate vehicle with guard removed.
• Do not touch clutch cover, cover may
become hot.
• Do not modify engine or clutch. Doing so
can cause part failure, possible imbalance,
and excessive engine RPM which can
result in serious injury or death.

7174694

Youth
Section

Know Your ATV
PARENTS: Polaris Youth ATVs are equipped with a speed control system to allow adults to
limit the speed of the vehicle for the rider's skill and experience. More information on speed
limiting functions can be found beginning on page 122.
These units are not designed for adult use. Serious damage to the vehicle may occur if the
maximum rider weight capacity is exceeded. See the specifications section beginning on
page 156 for your ATV's capacity.
CHILDREN: Before you ride your new Polaris ATV, there are some important things that
you need to know. Your safety and the safety of others is the most important thing to think
about at all times. As the driver of the ATV, you must learn how to keep yourself and those
around you safe while you're riding.
Pay attention when you see this symbol:
This is the safety alert symbol. When you see this symbol on your ATV or in this manual it
means PAY ATTENTION because you could die or be seriously injured if you don't follow the
instructions.

Know Your ATV
Before you have an adult start the engine for you for the first time, let's learn about the controls on your new ATV.
1. Engine Stop Switch - When the engine is running, push this button down to shut the
engine off quickly. The button must be up before you can start the engine again.
2. Horn Button - Press the horn button to sound the horn.
3. Throttle Control - Press the throttle lever with your thumb when you want the ATV to
go forward. Always make sure the throttle control does not stick before you drive your
ATV. Read more about it on page 47.
2. Horn Button

1. Engine Stop Switch

3. Throttle Control

Know Your ATV
4. Kick-Start Lever - If your battery is
too weak to start your ATV, you can
push down on the kick-start lever with
your foot to start the engine. Have an
adult show you how it works. Read
more about how to use the kick-start on
page 68.
4. Kick-Start Lever

Know Your ATV
5. Gas Cap - The gas cap has to be taken
off when an adult puts gas in your ATV.
Never take the gas cap off. Always
make sure it's tightly closed.

5. Gas Cap
6. Seat Latch

Always have an adult put gas in your
ATV. Never try to do it yourself.

6. Seat Latch - The seat latch is under the
left edge of the seat. Reach under the
left rear fender and pull back on the
latch to remove the seat. To replace the
seat, set it in place and push down on
the seat above the latch. Always make
sure the seat is locked in place before
riding.

Know Your ATV
7. Brake Levers - Squeeze the brake levers toward the handlebar to slow down or stop the
ATV. The left lever controls the rear brake. The right lever controls the front brake.
Always squeeze both brake levers at the same time.
Always squeeze both brake levers at the same time or you could lose control of the ATV and
be seriously injured. Always take your thumb off the throttle lever when you squeeze the
brake levers.

7. Rear Brakes

7. Front Brakes

Know Your ATV
8. Ignition Switch - The ignition switch key
must be turned on before pushing the start
button. You can also use this key to turn off
the engine.
9. Tether Strap and Switch - The tether strap
must always be attached snugly to your right
wrist and to your ATV every time you drive.
If you fall off your ATV, the tether strap will
pull away from the switch and the engine
will stop.

8. Ignition Switch
9. Tether Switch

Never ride without the tether strap attached to your right wrist and to your ATV. Be careful not
to let the cord get tangled around the handlebars or any part of your body.

Know Your ATV
Let's review the three ways to stop the
engine of your ATV:
1. Push the engine stop switch down.
2. Pull the tether strap off the ATV.
3. Turn the key off.

Pre-Ride Check
We're almost ready to have an adult start your ATV. But before the ATV is started for the first
time, you must do a Pre-Ride Check. In fact, every time you want to ride you must have an
adult help you check some things on your ATV before starting it. Let's learn about these
things now.
n Make sure the throttle doesn't stick. Check this by pushing the throttle lever toward the

handlebar and then letting go. The lever should come right back to where it was before
you pushed it. If it comes back slowly or stays close to the handlebar, the ATV has a
sticky throttle. This means that something is wrong or broken and must be fixed before
you can ride your ATV safely.
Never start the engine if you have a sticky throttle. You could be seriously hurt if you ride with
a sticky throttle. Have an adult or your Polaris dealer fix the throttle before you ride.

Pre-Ride Check
n Make sure the brakes don't stick. Check the brake levers by squeezing them toward the

handlebar and then letting go. They should come right back to where they were before
you squeezed. If they go back slowly or stay close to the handlebar, your ATV has sticky
brakes. They must be fixed before you can ride your ATV safely.
Never start the engine if your ATV has sticky brakes. You could be seriously hurt if you ride
with sticky brakes. Have an adult or your Polaris dealer fix the sticky brakes before you ride.

n Have an adult check to see if your ATV needs more gas. Children must never add their

own gasoline. This must always be done by an adult. Before anyone adds gasoline to
your ATV they must read the instructions and warnings on page 15 of this manual.
Always have an adult put gas in your ATV. Never try to do it yourself.

Pre-Ride Check
n If you used the storage area under the seat, make sure the seat is locked in place.
n Have an adult check the engine oil level when the engine is cold. The engine is very hot

after it has been running and it can burn your skin if you touch it. Children must never
check the oil on their own. An adult should always be in charge of keeping the gas and
oil levels at the full marks.

n This last check is done with the engine running. You must check to make sure that all

three ways to stop the engine of your ATV are working the way they should. Do you
remember what they are? If you can't remember the three ways to stop the engine, go
back to page 46 and review. Then have an adult help you start the engine. Practice stopping the engine all three ways.

Riding Rules
Now you're ready to learn about riding your Polaris ATV. There are some things you can do
and there are some things you must never do. Rules are very important when you're driving
an ATV. Adults have riding rules, too. The rules help keep us safe when we ride.
X The adult with you is your teacher. Always pay attention to what your teacher says so you
can learn how to always drive safely.
Let's learn how to ride!
Always follow the safe riding rules found on the next pages. You or others around you could
be seriously hurt if you don't follow the safe riding rules.

Riding Rules
Always wear the right kind of clothing and safety gear
when riding your ATV.
Long
Helmet
Helmet: Your helmet is very important for safe riding. A
Sleeves
helmet can prevent a severe head injury.
Eye Protection: Always wear shatterproof goggles or a
helmet face shield, and always keep them clean so you
can see where you're driving.
Eye
Protection
Gloves
Gloves: Wear gloves to protect your hands from sun and
wind. Gloves will also protect your hands from scrapes
Long Pants
and scratches.
Boots: Wear sturdy boots to keep your feet dry. Boots
will also protect your feet and ankles from scrapes and
scratches.
Boots
Clothing: Make sure your clothing fits properly. If it's
too small, it could keep you from moving easily when
you shift your weight. If it's too big, it could hang down and get caught in a moving part.
Wear long sleeves and long pants to protect your arms and legs.
X

Riding Rules
Always attach the tether strap to your right wrist
and to the ATV before riding.
X Make sure you know where you're going to drive
before your ATV is started. Make sure the area is
safe all around your ATV.
X Your ATV is made for one person. Never carry a
passenger. A passenger will make the ATV harder
to drive. You may lose control and hurt yourself
and your passenger.
X Always drive your ATV while sitting down. Keep
both hands on the handlebars and keep both feet on
the footrests.
X Always be alert and pay attention to where you're driving. Pay attention to other drivers,
and be even more careful around them because you don't know what they're going to do.
X Never follow another ATV too closely. You need lots of time and space to stop your ATV.
X Never tow or pull an object behind the ATV.
X

Riding Rules
Never ride alone. An adult should always be watching you in case you need help. Always
drive within the sight of an adult.
X Never ride on public trails.
X Don't ride your ATV on roads or over railroad tracks. Your ATV makes noise that will
keep you from hearing cars, trucks or trains that may be coming towards you.
X Don't ride at night. Your ATV doesn't have lights that are safe for driving in the dark.
X Learn where there are lakes, rivers, ponds and ditches in your driving area. Stay away
from them.
X Never ride on frozen water. You could get hurt or you could even die. All ice can be dangerous!
X Ride your ATV only where you know it is safe to drive and where you have permission to
drive. Be careful of the things around you.
X Always be a polite driver. (Don’t drive through the flower garden or over the little trees
you planted!)
X Always do your best to help take care of nature.
X

Respect your ATV;
respect your environment;
and you will earn
the respect of everyone.

Enjoy riding your new Polaris ATV!

Adult
Section

Vehicle Identification Numbers
Record your ATV's identification
numbers and key number in the
spaces provided. Remove the spare
key and store it in a safe place. An
ignition key can be duplicated only by
ordering a Polaris key blank (using
your key number) and mating it with
one of your existing keys. The ignition switch must be replaced if all
keys are lost.

Engine
Serial Number

Frame Identification
Number

Vehicle Model Number: ____________________________________________________________________
Frame Identification Number: ________________________________________________________________
Engine Serial Number: _____________________________________________________________________
Key Number (on the key): __________________________________________________________________

Features and Controls
Main Key Switch
Turn the key clockwise to the ON position
before starting the engine. To avoid draining
the battery, always turn the key to the OFF
position when the engine is not running.
Always remove the ignition key when the
vehicle is not in use.

Key

Features and Controls
Engine Stop Switch
The engine will not start or run when the stop
switch is down, in the OFF position. Its purpose is to provide the operator with a quick
means of engine shutdown in case of stuck
throttle or other emergency.
Both the main switch and the engine stop
switch shut off all electrical power to the
entire vehicle. To stop the engine quickly,
push the stop switch down.

Horn

Start Button

Stop Switch

Choke Lever

Choke Lever
Use the choke to start a cold engine. Push the choke lever to the left before starting the
engine. When the engine starts, gradually return the choke lever to the OFF position as the
engine warms up and runs smoothly.

Features and Controls
Horn Button
Use the horn for emergencies and to let others know you’re near.

Engine Start Button
The start button is located slightly above the choke lever.
1. Attach the tether strap securely to the vehicle and to the rider's right wrist.
2. Turn the key to the ON position.
3. Lock the parking brake.
4. Push the engine stop switch up to the ON position.
5. Press the start button.

Features and Controls
Throttle Controls
WARNING
Operating an ATV with sticking or improperly operating throttle controls could cause an accident and
lead to severe injury or death.
Never start or operate an ATV with a sticking or improperly operating throttle. Always contact your
dealer for service if throttle problems arise.
Failure to check or maintain proper operation of the throttle system can result in an accident if the
throttle lever sticks during operation. Always check the lever for free movement and return before
starting the engine. Also check occasionally during operation.

Features and Controls
Throttle Lever
Press the throttle lever toward the handlebar to
increase engine speed and vehicle movement.
Engine speed returns to idle when the lever is
released.
This ATV is equipped with an Electronic Throttle
Control (ETC), which is designed to reduce the
risk of a frozen or stuck throttle. If the throttle
cable should stick in an open position when the
operator releases the throttle lever, the engine will
stop and power to the rear wheels will cease.

Throttle
Lever

WARNING! The Electronic Throttle Control (ETC) stops the engine in the event of a throttle system
malfunction. Modifications to the electronic throttle control could result in failure to perform as
designed, which could result in an accident. Do not attempt to modify the ETC system or replace it with
any after market throttle mechanism. Always ensure that the throttle cable is installed and properly
routed to the throttle control.

Features and Controls
Brakes
Squeeze both brake levers toward the handlebar at the same time to apply the brakes. The left
lever controls the rear brakes. The right lever controls the front brakes.
WARNING! Applying only one brake could cause loss of control and result in serious injury or death.
Always apply both brakes at the same time.

Rear Brakes

Front Brakes

Features and Controls
Brakes
Parking Brake

1. Squeeze the left brake lever.
2. Push the parking brake lock down
to lock the brake lever in place.
3. Release the brake lever.
4. To release the parking brake lock,
squeeze and release the brake lever.
The parking brake will release
automatically.

Not Locked
Locked

WARNING! Operating the ATV while the parking brake is engaged could cause an accident resulting in
serious injury or death. It could also result in driveline or engine damage. Always be sure to disengage
the parking brake before operating the ATV.

Features and Controls
Brakes
Parking Brake

The CVT system is always in forward gear. Using the throttle to warm the engine will cause
the vehicle to move forward if the parking brake is not locked. Always lock the parking
brake before starting the engine. Always lock the parking brake whenever the vehicle is left
unattended.

Lights
WARNING
Polaris Youth ATVs are not equipped with lights that are designed for driving in the dark. Do not operate
this ATV after dark. Use caution and drive at reduced speeds in conditions of reduced visibility. This
ATV is designed for off-road use only. Do not operate this ATV on streets or highways.

Features and Controls
Fuel System
Gas Cap

Gas Cap

The fuel tank filler cap is located directly
below the handlebars. Use unleaded gasoline
with a minimum pump octane number of
87=(R+ M/2) octane. Do not use fuel with ethanol content greater than 10 percent, such as
E-85 fuel.
Refer to the specifications section beginning
on page 156 for fuel tank capacity.

Features and Controls
Fuel Valve
The fuel valve is located on the left side
of the ATV. It has three settings.
OFF: For vehicle storage and when
transporting.
ON: For normal operation.
RES: For reserve supply if main supply is
exhausted.

The reserve setting allows operation for
approximately 7-10 miles (11-16 km).
Always refill the gas tank as soon as possible after using the main supply. Always
return the valve to the ON position after
refueling.
OFF

RES

Features and Controls
Footwell Riser
The removable footwell risers improve riding ergonomics and provide comfort for shorter
operators. An operator will also have better control of the ATV when both feet can remain
firmly planted on either the footwells or the risers. If the operator's legs are long enough to
comfortably reach the footwells without the risers, the risers can be removed.
1. Remove the rubber caps covering the screw
access holes.
Cap
2. Remove the screws and nuts securing the
Screw
footwell riser to the footwell.
3. Remove the riser.
4. Reverse the procedure to reinstall the footwell riser for shorter operators.

Nut
67

Features and Controls
Kick-Start Lever
If the battery becomes too weak to start the
Kick-Start Lever
engine, use the kick-start lever to start the engine
until the battery is serviced.
1. Position the vehicle on a level surface.
2. Lock the parking brake.
3. Fold out the kick-start lever on the left side of
the vehicle.
4. Push the engine stop switch up to the ON
position.
5. Turn the key to ON.
6. Place your foot on the kick-start, then thrust your heel downward to crank the engine.
7. After the engine has started, fold the kick-start lever back into place.

Features and Controls
Kick-Start Lever
8. If the kick-start lever is not installed, remove the lever from the under-seat storage area.
9. Remove the plug from the kick-start access hole on the left side of the vehicle.
Tip: Store the plug in a secure location. Always reinstall the access hole plug whenever the kick-start
lever is removed from the vehicle.

10. Install the kick-start lever through the access hole.

Operation
WARNING
Failure to operate the ATV properly can result in a collision, loss of control, accident or overturn, which
may result in serious injury or death. Read and understand all safety warnings outlined in the safety
section of this owner’s manual.

Break-in Period
The break-in period for your new Polaris 4-cycle ATV is defined as the first ten hours of
operation, or the time it takes to use the first two full tanks of gasoline. No single action on
your part is as important as following the procedures for a proper break-in. Careful treatment
of a new engine will result in more efficient performance and longer life for the engine. Perform the following procedures carefully.
NOTICE: Excessive heat build-up during the first three hours of operation will damage close-fitted
engine parts. Do not operate at full throttle or high speeds for extended periods during the
first three hours of use.
Mixing brands or using a non-recommended oil may cause serious engine damage. Always
use the recommended oil. Never substitute or mix oil brands.

Operation
Break-in Period
1. Fill the fuel tank with gasoline. Always
exercise extreme caution whenever handling gasoline. See page 15.
2. Check the oil level. Add the recommended oil as needed. Maintain the oil
level in the proper range. See page 105.
3. Drive slowly at first. Select an open
area that allows room to familiarize
yourself with operation and handling.
Item

4. Vary throttle positions. Do not operate
at sustained idle.
5. Perform regular checks on fluid levels,
controls and areas outlined on the daily
pre-ride inspection checklist. See page
72.
6. Perform the following maintenance at
the end of the break-in period.
End of Break-In Remarks

See
Page

Engine oil change

Perform break-in oil change

106

Oil pre-filter screen

Clean filter with oil change

107

Transmission oil

Perform break-in oil change

110

Valve clearance

See your dealer for inspection and adjustment

Operation
Pre-Ride Inspection
Failure to inspect and verify that the ATV is in safe operating condition before operating
increases the risk of an accident. Always inspect the ATV before each use to make sure it's in
safe operating condition.
Pre-Ride Checklist
Item

Remarks

Page

Brake system / lever travel

Ensure proper operation

Front suspension

Inspect, lubricate if necessary

102

Rear suspension

Inspect, lubricate if necessary

102

Steering

Ensure free operation, lubricate if necessary

Tires

Check condition and pressure

Wheels / fasteners

Inspect, ensure fastener tightness; check that
axle nuts are secured by cotter pins

Fuel and oil

Check and fill as needed

125, 129

130, 132
139
141, 141
15, 65

Operation
Pre-Ride Inspection
Pre-Ride Checklist
Item

Remarks

Page

Throttle

Check for proper operation

47, 60, 61

Engine stop switch

Check for proper function

Daytime running lights (if equipped)

Check for proper operation

143

Brakelight

Check for proper operation

142

Air filter, pre-filter

Inspect, clean or replace

136

Drive chain

Check condition and slack; refer to drive
chain adjustment

133

Frame nuts, bolts, fasteners

Inspect, ensure tightness

Loose or damaged components

Visually inspect for any damaged components or loose fasteners

Riding gear

Wear helmet, goggles, protective clothing

Operation
Safe Operation Practices
1. Complete the recommended safety
training before operating this vehicle.
See page 8.
2. Do not allow anyone under 6 years of
age to operate this vehicle.
3. Never carry a passenger on this ATV.
4. Engine exhaust fumes are poisonous.
Never start the engine or let it run in an
enclosed area.

5. Operate this vehicle off-road only.
Never operate the vehicle on pavement
or on any public street, road or highway,
including dirt and gravel roads.
6. Never exceed the maximum weight
capacity of the vehicle. When determining the weight you are adding to the
vehicle, include the weight of the operator, accessories, loads on the racks (if
equipped) and the load on the trailer
tongue (if equipped). The combined
weight of these items must not exceed
the maximum weight capacity.

Operation
Safe Operation Practices
7. Drive in a manner appropriate for your
skills and operating conditions. Never
operate at excessive speeds. Never
attempt wheelies, jumps, or other stunts.
Never remove your hands from the handlebars while operating, and always
keep both feet on the footrests.
8. Never consume alcohol or drugs before
or while operating an ATV.
9. Always use the size and type of tires
specified for your vehicle. Always
maintain proper tire pressure.

10. Never operate a damaged ATV. After
any overturn or accident, have a qualified service dealer inspect the entire
machine for possible damage.
11. Never operate the ATV on a frozen
body of water.
12. Do not touch hot exhaust system components. Always keep combustible
materials away from the exhaust system.
13. Always remove the ignition key when
the vehicle is not in use to prevent unauthorized use.

Operation
Starting the Engine
NOTICE: Operating the ATV immediately after starting could cause engine damage. Allow the engine
to warm up for several minutes before operating.

1.
2.
3.
4.

Lock the parking brake.
Turn the fuel valve on.
Sit on the vehicle.
Attach the tether strap to the ATV and
to your wrist.
5. If the engine is cold, use full choke by
pushing the choke lever all the way to
the left. Do not use the choke when
starting a warm engine.

Choke Off
Full Choke

Tip: The choke is fully on when the lever is pushed completely to the left. The choke is off when the
lever is pushed completely to the right. The choke can be adjusted gradually, depending on how
much choke is needed for starting.

Operation
Starting the Engine
6. Push the engine stop switch up to the ON position.
7. Turn the ignition key to ON.
8. Squeeze the rear brake lever and press the start button. The rear brake lever must be
engaged for the engine to start.
9. Do not press the throttle while starting the engine. Activate the starter for a maximum of
five seconds, releasing the button when the engine starts. If it doesn't start, release the
starter, wait five seconds, then activate for another five seconds. Repeat until the engine
starts.
10. If the engine slows or stops, position the choke lever half way to allow proper engine
warm up. Vary the RPM slightly with the throttle to aid in warm up.
11. When the engine idles smoothly, push the choke lever completely to the right.

Operation
Stopping the Engine
1. Release the throttle completely.
2. Apply the brakes until the vehicle stops moving.
3. Stop the engine. There are three ways to stop the engine:
• Turn the key off.
• Push the engine stop switch down.
• Pull the tether strap off the ATV.

4. Lock the parking brake.
5. To avoid draining the battery, always turn the key to the OFF position when the engine is
not running.

Operation
Driving Procedure
1. Wear a helmet and eye protection.
2. Sit upright with both feet on the footrests and
both hands on the handlebars.
3. Lock the parking brake.
4. Start the engine and allow it to warm up.
5. Check your surroundings and determine your
path of travel.
6. Slowly squeeze and release the left brake lever
to unlock the parking brake.
7. Slowly press the throttle with your right thumb
and begin driving.
8. Drive slowly at first. Practice turning and using
the throttle and brakes on level surfaces.

Operation
Making Turns
Your ATV is equipped with a solid rear axle,
which drives both rear wheels equally at all
times. This means that the wheel on the outside
of the turn must travel a greater distance than the
inside wheel when turning, and the inside tire
must slip traction slightly.
To turn, steer in the direction of the turn, leaning
your upper body to the inside of the turn while
supporting your weight on the outer footrest.
This technique alters the balance of traction
between the rear wheels, allowing the turn to be
made smoothly.
Practice making turns at slow speeds.
WARNING! Turning improperly can result in vehicle
overturn. Never turn abruptly or at sharp angles.
Never turn at high speeds.

Operation
Driving Over Obstacles
Follow these precautions when operating
over obstacles:
1. Always check for obstacles before
operating in a new area.
2. Look ahead and learn to read the terrain. Be constantly alert for hazards
such as logs, rocks and low hanging
branches.
3. Travel slowly and use extra caution
when operating on unfamiliar terrain.
Not all obstacles are immediately visible.
4. Never attempt to operate over large
obstacles, such as rocks or fallen trees.

Operation
Driving Uphill
Braking and handling are greatly affected
when operating in hilly terrain. Improper
procedure could cause loss of control or
overturn. Whenever traveling uphill, follow these precautions:
1. Drive straight uphill.
2. Avoid steep hills (15° maximum).
3. Always check the terrain carefully
before ascending any hill.
4. Never climb hills with excessively
slippery or loose surfaces.

15° Maximum

Operation
Driving Uphill
5. Keep both feet on the footrests.
6. Shift body weight uphill.
7. Proceed at a steady rate of speed and throttle opening. Opening the throttle suddenly
could cause the ATV to flip over backwards.
8. Never go over the top of any hill at high speed. An obstacle, a sharp drop, or another
vehicle or person could be on the other side of the hill.
9. Remain alert and be prepared to take emergency action. This may include quick dismounting of the vehicle.

Operation
Driving on a Sidehill (Sidehilling)
Driving on a sidehill is not recommended. Improper procedure could cause loss of control or
overturn. Avoid crossing the side of any hill unless absolutely necessary.
If crossing a sidehill is unavoidable, follow
these precautions:
1. Slow down.
2. Lean into the hill, transferring your
upper body weight uphill while keeping
your feet on the footrests.
3. If the vehicle begins to slide or tip,
quickly turn the front wheel downhill, if
possible, or dismount on the uphill side
immediately!

Operation
Driving Downhill
When driving downhill, follow these precautions:
1. Avoid steep hills (15° maximum).
2. Shift body weight uphill. Transfer your weight
to the rear of the vehicle.
3. Drive straight downhill.
4. Slow down. Excessive speed when traveling
downhill can cause loss of control.
5. Apply the front and rear brakes at the same
time, and very slightly, to aid in slowing.

Operation
Turning Around on a Hill
If the vehicle stalls while climbing a hill, never back it down the hill! Use the K-turn to turn
around.
1. Stop the vehicle and lock the parking brake while keeping body weight uphill.
2. Shut off the engine.
3. Dismount on the uphill side of the vehicle, or on the left if the vehicle is pointing straight
uphill.

Operation
Turning Around on a Hill
4. Staying uphill of the ATV, turn the handlebars full left.
5. While holding the brake, release the parking brake lock and slowly release the brake,
allowing the ATV to roll around to your
right until it's pointing across the hill or
slightly downward.
6. Lock the parking brake and remount the
ATV from the uphill side, keeping body
weight uphill.
7. Restart the engine.
8. Squeeze the rear brake lever.
9. Release the parking brake and drive slowly,
controlling speed with the rear brake, until
the ATV is on more level ground.

8 ft. (2.4 m)

Operation
Parking on a Hill or Incline
Avoid parking on a hill or incline if
possible. If it's unavoidable, follow these
precautions:
1. Stop the engine.
2. Lock the parking brake.
3. Always block the rear wheels on the
downhill side as shown in the illustration.
4. Turn the fuel valve off.

Operation
Driving on Slippery Surfaces
Whenever riding on slippery surfaces such as wet
trails or loose gravel, or during freezing weather,
follow these precautions:
1. Do not operate on excessively rough, slippery
or loose terrain.
2. Slow down when entering slippery areas.
3. Maintain a high level of alertness, reading the
trail and avoiding quick, sharp turns, which
can cause skids.
4. Never apply the brakes during
a skid. Correct a skid by
turning the handlebars in the
direction of the skid and
shifting your body weight
forward.

Sideways
skid

Turn in direction
of skid

Operation
Driving Through Water
Your ATV can safely operate through shallow
water. The recommended maximum depth for your
ATV is below the bottom of the footrests. Follow
these precautions when operating through water:
1. Determine water depth and current before
entering water.
2. If crossing a stream, choose a crossing where
both banks have gradual inclines.
3. Avoid operating through deep or fast-flowing
water.

Maximum Water Depth

Operation
Driving Through Water
4. After driving through water, dry the brakes by applying light pressure to the levers
(while moving) until braking action is normal. If you do not perform this procedure, your
brakes may be ineffective.
NOTICE: Serious engine damage can result if the vehicle is not thoroughly inspected after operating
in water deeper than the footrest level. As soon as possible, perform the inspections and
maintenance services outlined in the periodic maintenance chart beginning on page 94.
Engine oil, gearcase oil, front and rear gearcases (if equipped) and all grease fittings need
special attention.
If the vehicle tips or overturns in water, or if the engine stops during or after operating in
water, restarting can result in serious engine damage. Transport the vehicle to your dealer
for service before restarting the engine. If this is not possible, follow the vehicle immersion
inspection and drying procedures outlined on page 114, then see your dealer for service at
the first opportunity.

Emission Control Systems
Noise Emission Control System
Do not modify the engine, intake or exhaust components, as doing so may affect compliance
with U.S.A. EPA noise control requirements (40 CFR 205) and local noise level requirements.

Operation on Public Lands in the U.S.A.
Your Polaris vehicle has a spark arrestor that was tested and qualified to be in accordance
with the USFS standard 5100-1c. Federal law requires that this spark arrestor be installed
and functional when the vehicle is operated on public lands.
Operation of off-road vehicles on public lands in the U.S.A. is regulated by 43 CFR 420.
Violations are subject to monetary penalties. Federal regulations can be viewed online at
www.gpoaccess.gov/ecfr/.

Crankcase Emission Control System
This engine is equipped with a closed crankcase system. Blow-by gases are forced back to
the combustion chamber by the intake system. All exhaust gases exit through the exhaust
system.

Emission Control Systems
Exhaust Emission Control System
The emissions from the exhaust of this vehicle are controlled by engine design, including
factory-set fuel delivery and ignition. The engine and related components must be maintained at Polaris specifications to achieve optimal performance.
Engine idle speed is the only adjustment Polaris recommends that the operator perform. Any
other adjustments should be performed by an authorized Polaris dealer.
The emissions label is located on the clutch cover or engine case near the clutch box.
The installation of devices that effectively increase exhaust emissions beyond their legal limits will void all manufacturer warranties and may violate laws governing the registration and
operation of this vehicle.

Electromagnetic Interference
This spark ignition system complies with Canadian ICES-002.
This vehicle complies with the EMC requirements of European directives 97/24/EC and
2004/108/EC.

Maintenance
Periodic Maintenance Chart
To help you perform routine maintenance, a tool kit is provided in the storage compartment
under the seat.
Maintenance intervals in the following charts are based upon average riding conditions and
an average vehicle speed of approximately 10 miles per hour. Vehicles subjected to severe
use must be inspected and serviced more frequently. Record maintenance and service in the
Maintenance Log beginning on page 181.

Maintenance
Periodic Maintenance Chart
Inspect, clean, lubricate, adjust and replace parts as necessary. When inspection reveals the
need for replacement parts, use genuine Polaris parts available from your Polaris dealer.
Service and adjustments are critical. If you're not familiar with safe service and adjustment
procedures, have a qualified dealer perform these operations.
Severe Use Definition
•
•
•
•
•

Frequent immersion in mud, water or sand
Racing or race-style high RPM use
Prolonged low speed, heavy load operation
Extended idle
Short trip cold weather operation

Maintenance
Periodic Maintenance Chart
WARNING
Improperly performing the procedures marked with a Q could result in component failure and cause an
accident, which may result in serious injury or death. Always have an authorized Polaris dealer perform
these services.

Maintenance Chart Key

Perform these operations more often under severe use, such as in dirty or wet conditions, to purge water or dirt contamination from grease fittings and other critical components.
E Emission-related service (Failure to conduct this maintenance will not void the emissions warranty but may affect emissions.)
Q Dealer service item.
X

Maintenance
Periodic Maintenance Chart
Item

Maintenance Interval
(whichever comes first)
Hours

Calendar

Miles (Km)

Steering

Daily

Front suspension

Daily

Rear suspension

Daily

Tires

Daily

Brake lever travel

Daily

Brake system

Daily

Wheels/fasteners

Daily

Frame fasteners

Daily

Engine oil level

Daily

Air filter, pre-filter & main
element

Daily

Air box sediment tube

Headlamp/tail lamp

Remarks

See
Page

Check each day before operating
the vehicle. Make adjustments as
needed. See the Pre-Ride Checklist.

Inspect; clean often; replace as
needed

136

Daily

Drain deposits when visible

Daily

Check operation; apply dielectric
grease if replacing

-142
143

Maintenance
Periodic Maintenance Chart
Item

Maintenance Interval
(whichever comes first)

Remarks

See
Page

Hours

Calendar

Miles (Km)

Drive chain

Daily

Inspect daily; adjust and lubricate
if needed

133

CVT housing (if equipped)

Weekly

Drain water as needed, check
often if operating in wet conditions

117

Perform break-in maintenance

Break-in Maintenance

After first 10 hours of operation

Brake lever travel/brake
freeplay

Monthly

100 (160)

Inspect regularly

125
129

Spark plug

Monthly

100 (160)

Clean; check condition; adjust
gap; replace as needed

112

Idle speed

Monthly

100 (160)

Check; adjust as needed

121

Choke

Monthly

100 (160)

Check for proper operation; see
your dealer for adjustments

X Perform these procedures more often for vehicles subjected to severe use.
E Emission-Related Service
Q Have an authorized Polaris dealer perform these services.

Maintenance
Periodic Maintenance Chart
Item

Maintenance Interval
(whichever comes first)

Remarks

See
Page

Hours

Calendar

Miles (Km)

Battery

Monthly

200 (320)

Check terminals; clean; test

144

Engine oil change

300 (480)

Drain and change the oil

106

Transmission oil

12 M

400 (640)

Drain and change the oil

110

Oil pre-filter screen

12 M

400 (640)

Clean filter at every oil change;
clean annually if ATV is operated
less than 10 hours

107

General lubrication

500 (800)

Lubricate all fittings, pivots,
cables, etc.

Valve clearance

500 (800

Check clearance; see your dealer
for adjustments

Carburetor float bowl

500 (800)

Drain bowl periodically and prior
to storage

Throttle cable/ETC switch

500 (800)

Inspect; adjust; lubricate; replace
if necessary

Choke cable

500 (800)

Inspect; adjust; lubricate; replace
if necessary

Maintenance
Periodic Maintenance Chart
Item

Maintenance Interval
(whichever comes first)
Hours

Calendar

Miles (Km)

Remarks

See
Page

Carburetor air intake
ducts/flange

500 (800)

Check for proper sealing/air leaks

Drive belt

500 (800)

See your Polaris dealer

Brake pad wear

500 (800)

See your Polaris dealer

Fuel system

100

12 M

1000 (1600)

Check for leaks at tank cap, lines,
fuel valve, filter, pump, carburetor;
replace lines every two years

Fuel filter

100

12 M

1000 (1600)

Change filter

Engine mounts

100

12 M

1000 (1600)

Inspect

Exhaust muffler/pipe

100

12 M

1000 (1600)

Inspect

Ignition timing

100

12 M

1000 (1600)

Inspect

X Perform these procedures more often for vehicles subjected to severe use.
E Emission-Related Service
Q Have an authorized Polaris dealer perform these services.

100

109

Maintenance
Periodic Maintenance Chart
Item

Maintenance Interval
(whichever comes first)
Hours

Calendar

Miles (Km)

Remarks

See
Page

Wiring

100

12 M

1000 (1600)

Inspect for wear, routing, security;
apply dielectric grease to connectors subjected to water, mud, etc.

Clutches (drive and driven)

100

12 M

1000 (1600)

Inspect; clean; replace worn parts

Front wheel bearings

100

12 M

1000 (1600)

Inspect; replace as needed

Spark arrestor

300

36 M

3000 (4800)

Clean out

118

Inspect periodically; adjust when
parts are replaced

130

Toe adjustment

101

Maintenance
Lubrication Guide
Item

Lube

Method

Engine Oil

Polaris Synthetic Youth Oil
or Synthetic SAE 40

See page 104.

Gearcase (Transmission)
Oil Level

Premium AGL Synthetic
Gearcase Lube

See page 110.

Drive Chain

Polaris Chain Lube or SAE 80/
90

See page 133.

X Front Suspension

Polaris All Season Premium
Grease or grease conforming
to NLGI No. 2

Inspect; tighten fasteners;
grease (also after washing
ATV or driving in water).

(A-Arm)

XPerform these procedures more often for vehicles subjected to severe use

102

Maintenance
Lubrication Guide
Grease Points

Grease Points

103

Maintenance
Engine Oil
Oil Recommendations

Always check and change the engine oil at the intervals outlined in the Periodic Maintenance
Chart beginning on page 94. Oil may need to be changed more frequently if Polaris oil is not
used. Do not use automotive oil. See page 158 for the part numbers of Polaris products.
Under These Operating Conditions

Use This Recommended Oil

Outside air temperature is above 32° F/0° C

Polaris Synthetic Youth Oil
(or Synthetic SAE40)

Outside air temperature is below 32° F/0° C

Semi-Synthetic 20W-40

NOTICE: Mixing brands or using a non-recommended oil may cause serious engine damage. Always
use the recommended oil. Never substitute or mix oil brands.

104

Maintenance
Engine Oil Check
Maintain the oil level within the safe range on
the dipstick. Do not overfill.
1. Position the vehicle on a level surface.
2. Remove the dipstick. Wipe it dry with a
clean cloth.
3. Reinstall the dipstick completely.
4. Remove the dipstick and check the oil level.
Tip: A rising oil level between checks in cool weather
driving can indicate contaminants such as gas or
moisture collecting in the crankcase. If the oil level
is over the full/safe mark, change the oil immediately.

Safe Range

{

5. Add the recommended oil as needed.
6. Reinstall the dipstick.

Dipstick

Add Oil

Full
105

Maintenance
Engine Oil Change
1.
2.
3.
4.

Position the vehicle on a level surface.
Clean the area around the pre-filter plug.
Start the engine. Allow it to idle for two to three minutes.
Stop the engine.

CAUTION! Hot oil can cause burns to skin. Do not allow hot oil to contact skin.

106

Maintenance
Engine Oil Change
5. Place a drain pan under the engine crankcase.
6. Remove the pre-filter plug. Allow the oil to
drain completely.
7. Wash the oil pre-filter screen with solvent to
remove debris. Allow the screen to air dry.
8. Clean the pre-filter plug. Install a new sealing washer on the plug. The sealing surfaces
on the plug and crankcase should be clean and free of burrs, nicks or scratches.
9. Reassemble the pre-filter screen and spring to the pre-filter plug.

107

Maintenance
Engine Oil Change
10. Reinstall the pre-filter drain plug. Torque to 11 ft. lbs. (15 Nm).
11. Remove the dipstick. Add 29 oz. (850 ml) of the recommended oil. Do not overfill. See
the specifications section beginning on page 156 for capacities.
12. Reinstall the dipstick.
13. Start the engine. Allow it to idle for one to two minutes.
14. Stop the engine and inspect for leaks.
15. Check the oil level. Add oil as needed to bring the level to the upper mark on the dipstick.
16. Dispose of used oil properly.

108

Maintenance
Fuel Filter
The Polaris ATV is equipped with an in-line fuel filter. This filter should be replaced by your
dealer at the intervals recommended in the Periodic Maintenance Chart beginning on page
94. Do not attempt to clean the fuel filter.

109

Maintenance
Transmission Oil Check
The gearcase fill plug is located on the side of the
gearcase on the right side of the ATV. Maintain the
oil level at the bottom of the fill plug hole threads.
Always check and change the oil at the intervals
outlined in the Periodic Maintenance Chart beginning on page 94. Polaris recommends the use of
AGL Synthetic Gearcase Lubricant. See page 158
for the part numbers of Polaris products.
1. Position the vehicle on a level surface.
2. Remove the fill plug.
3. View the oil level through the fill hole.
4. If the level is low, add the recommended oil.
5. Reinstall the fill plug.

110

Fill Plug
Drain Plug

Maintenance
Transmission Oil Change
1.
2.
3.
4.
5.
6.

Position the vehicle on a level surface.
Remove the fill plug.
Place a drain pan under the gearcase.
Remove the drain plug. Allow the oil to drain completely.
Clean and reinstall the drain plug. Torque to 14 ft. lbs. (19 Nm).
Add the recommended oil. Maintain the oil level at the bottom of the fill plug hole
threads.
7. Reinstall the fill plug. Check for leaks.
8. Dispose of used oil properly.

Gearcase Capacity
Outlaw 50

11.8 oz. (350 ml)

111

Maintenance
Spark Plugs
Refer to the specifications section beginning on page 156 for spark plug and gap specifications.
NOTICE: Using non-recommended spark plugs can result in serious engine damage. Always use
Polaris-recommended spark plugs.

Spark plug condition is indicative of engine operation. The spark plug firing end condition
should be read after the engine has been warmed up and the vehicle has been driven at higher
speeds. Immediately check the spark plug for correct color.
CAUTION! A hot exhaust system and engine can cause burns. Wear protective gloves when
removing a spark plug for inspection.

112

Maintenance
Spark Plugs
Normal Plug

The normal insulator tip is gray, tan or light brown. There will be few combustion deposits.
The electrodes are not burned or eroded. This indicates the proper type and heat range for the
engine and the service. The tip should not be white. A white insulator tip indicates overheating, caused by use of an improper spark plug or incorrect carburetor/throttle body adjustments.
Wet Fouled Plug

The wet fouled insulator tip is black. A damp oil film covers the firing end. There may be a
carbon layer over the entire nose. Generally, the electrodes are not worn. General causes of
fouling are excessive oil, use of non-recommended injection oil, improper use of the choke,
or incorrect carburetion adjustments.
Spark Plug Change

1. Remove the spark plug cap.
2. Using the special wrench provided in the tool pouch, rotate the spark plug counterclockwise to remove it.
3. Reverse the procedure for spark plug installation. Torque to 14 ft. lbs. (19 Nm).
113

Maintenance
Cylinder Head Torque
Have your dealer check the ATV cylinder head for proper torque at the first service, or after
25 hours.

Vehicle Immersion
If the vehicle tips or overturns in water deeper than the footrest level, or if the engine stops
during or after operating in water, restarting WILL result in serious engine damage. Transport the vehicle to your dealer for service before restarting the engine. If this is not possible,
follow the vehicle immersion inspection and drying procedures outlined below. This procedure will allow short-term operation only to drive the ATV to a trailer or towing vehicle.
1. Move the ATV to dry land or at the very least, to water below the footrests.
2. Turn the fuel valve off.
3. Check the air box for any water and dry it if water is present.
4. Remove the spark plug.

114

Maintenance
Vehicle Immersion
5. Loosen the carburetor drain screw.
6. Turn the engine over several times using the electric start.
7. Dry the spark plug and reinstall it, or replace it with a new
plug.
8. Tighten the carburetor drain screw.
9. Turn the fuel valve on.
10. Attempt to start the engine. If necessary, repeat the drying
procedure.
11. Take the ATV to your dealer for service as soon as possible,
whether you succeed in starting it or not.
12. If water has been ingested into the transmission, follow the
procedure on page 117 for drying the CVT.

Drain Screw

115

Maintenance
Constant Variable Transmission (CVT) System
WARNING
Failure to comply with the instructions in this warning can result in severe injury or death.
Do not modify any component of the CVT system. Doing so may reduce its strength so that a failure
may occur at a high speed. The CVT system has been precision balanced. Any modification will cause
the system to be out of balance, creating vibration and additional loads on components.
The CVT system rotates at high speeds, creating large amounts of force on clutch components.
Extensive engineering and testing has been conducted to ensure the safety of this product. However,
as the owner, you have the following responsibilities to make sure this system remains safe:
• Always follow all recommended maintenance procedures. See your dealer as outlined in the owner's
manual.
• This CVT system is intended for use on Polaris products only. Do not install it in any other product.
• Always make sure the CVT housing is securely in place during operation.

116

Maintenance
Constant Variable Transmission (CVT) System
CVT Drying
There may be some instances when water is accidently ingested into the CVT system. Use
the following instructions to dry it out before operating. The drain plug is located on the bottom of the CVT cover.
1. Remove the drain plug. Allow the water to drain. Reinstall the drain plug.
2. Start the engine. Apply varying throttle for 10-15 seconds to expel the moisture and airdry the belt and clutches. Do not hold the throttle wide open for more than 10 seconds.
3. Allow the engine RPM to settle to idle speed.
4. Test for belt slippage. If the belt slips, repeat the process.
5. Take the vehicle to your dealer for service as soon as possible.
NOTICE: Exposure to salt water will cause corrosion to metal components. If your vehicle is operated
in salt water areas, rinse it off frequently with fresh water.

117

Maintenance
Spark Arrestor
To remove accumulated carbon, clean the spark arrestor at the intervals recommended in the
Periodic Maintenance Chart beginning on page 94.
WARNING
Failure to heed these warnings could result in serious injury or death.
• Do not perform service on the spark arrestor while the system is hot. Allow components to cool
sufficiently before proceeding.
• Wear eye protection and gloves.
• Never run the engine in an enclosed area. Exhaust contains poisonous carbon monoxide gas.

118

Maintenance
Spark Arrestor
1. Remove the three bolts and remove the
arrestor from the end of the muffler.
2. Use a non-synthetic brush to clean the
arrestor screen. A synthetic brush may
melt if components are warm. If necessary,
blow debris from the screen with compressed air.
3. Inspect the screen for wear and damage.
Replace the arrestor if damage is found.
4. Reinstall the arrestor.
5. Torque the bolts to 7 ft. lbs. (9.5 Nm).

Bolts

Arrestor
Screen

119

Maintenance
Carburetor
Your Polaris ATV is calibrated at the factory for optimal performance at altitudes ranging
from zero to 6,000 feet (1800 m) and temperatures of +40 degrees F. (4 degrees C.) or higher.
Above 6000 feet (1800 m) the engine air/fuel mixture becomes overly rich and the engine
loses approximately 3% of its power for each 1000-foot (304.8 m) increase in elevation.
Although this power cannot be regained, adjustments to the carburetor and drive system can
be made to allow more efficient operation. Optional jets, available from your Polaris dealer,
are required for operation above 6,000 feet and temperatures below +40 degrees F. (4
degrees C.).
NOTICE: Continuous operation of the engine without proper jetting when required can cause poor
performance, overheating or engine damage. See your Polaris dealer for more information
about jetting the ATV for conditions in your area.

120

Maintenance
Carburetor
If the engine idle speed is not satisfactory, and all other conditions are favorable, the carburetor can be adjusted.
1. Start the engine.
2. Lock the parking brake.
3. Allow the engine to run for approximately five minutes.
4. Adjust the carburetor idle screw either in or out until the desired idle RPM is reached.
Turning the screw in (clockwise) will raise RPM. Turning the screw out (counterclockwise) will lower RPM.

121

Maintenance
Speed Control System
Per ANSI / SVIA-1-2001 (sec. 6.1.3) AS DELIVERED TO THE CONSUMER, the speed of
youth models is restricted to under 10 MPH for the 50cc models and under 15 MPH for the
90cc models.
The dealer CANNOT, under any circumstances, either prior to the sale or later, even at the
consumer's request, remove or adjust any speed limiting devices.
Your Polaris ATV has an adjustable throttle limiting screw. Speed limiting devices may be
adjusted/removed only by consumers when they determine that their child is capable of handling the additional speed.
Per ANSI / SVIA-1-2001 (sec. 6.2) the unrestricted top speed is less than 15 MPH for the
50cc models and less than 30 MPH for the 90cc models.

122

Maintenance
Speed Control System
Throttle Stop Speed Control System

Use the following procedure to control how far
the throttle opens.
1. Loosen the jam nut.
2. Turn the screw inward to reduce speed or
outward to increase speed.
3. Tighten the jam nut after adjusting.

Jam Nut
Screw

123

Maintenance
Throttle Cable Adjustment
Always check the throttle for smooth operation
before riding. Periodically check the throttle
freeplay. It should be kept between 1/16" and
1/8" (1.5 - 3.2 mm). If adjustment is required,
turn the adjustment nut until the freeplay falls
in to the acceptable limit.

Adjustment
Nut
1/16" - 1/8"
(1.5 - 3.2 mm)

124

Maintenance
Brake Freeplay
Check (measure) the freeplay of the
front and rear brakes at the intervals recommended in the Periodic Maintenance
Chart beginning on page 94. If the freeplay isn’t at specification, adjust the
freeplay as outlined on the following
pages.

Measure Freeplay

Brake Freeplay Specifications
Model

Front Brake

Rear Brake

Outlaw 50

.08”-.12" (2-3 mm)

125

Maintenance
Brake Freeplay
Front Brake Adjustment
1. Position the vehicle on a level surface.
2. Elevate the front of the vehicle by
placing a suitable stand under the
frame. The front tires should be
slightly off the ground.
3. While rotating the left front wheel,
tighten the upper front brake adjuster
nut on the right-hand control.
4. When you begin to feel a slight drag
in wheel rotation, loosen the adjuster
nut one full turn.

126

Front Brake
Adjuster Nuts

Maintenance
Brake Freeplay
Front Brake Adjustment
5. While rotating the right front wheel, tighten the lower front brake adjuster nut on the
right-hand control.
6. When you begin to feel a slight drag in wheel rotation, loosen the adjuster nut one full
turn.
7. Verify that the right-hand brake functions correctly.
8. Verify that brake lever freeplay is at specification. See page 125.
9. Carefully lower the vehicle to the ground.

127

Maintenance
Brake Freeplay
Rear Brake Adjustment
1. Position the vehicle on a level surface.
2. Elevate the rear of the vehicle by placing a suitable
stand under the frame. The rear tires should be
slightly off the ground.
3. While rotating the rear wheels, tighten the rear brake
wing nut at the rear brake drum.
4. When you begin to feel a slight drag in wheel rotation, loosen the wing nut one full turn.
5. Verify that the left hand brake functions correctly.
6. Verify that brake lever freeplay is at specification.
See page 125.
7. Carefully lower the vehicle to the ground.

128

Rear Brake
Wing Nut

Maintenance
Brake Lever Travel
Check brake lever travel at the intervals recommended in the Periodic Maintenance Chart
beginning on page 94. When freeplay specifications can no longer be obtained through
adjustment as outlined on the preceding pages, use the following information to determine
when to service the brakes.
Service the brakes when brake
lever travel reaches the total lever
travel measurement listed in the
Measure
table below. Always service the
Lever
brakes when there is no longer
Travel
sufficient stopping ability at the
specified lever travel setting.
Component

Total Lever Travel

Front brake lever

1 3/4" (45 mm)

Rear brake lever

2 1/2" (65 mm)
129

Maintenance
Toe Alignment
Use the following procedure to check the toe alignment of the vehicle. The recommended toe alignment
is 1/8" to 1/4" (3-6 mm) toe out.
WARNING! Severe injury or death can result from
improper toe alignment and adjustment. Do not attempt to
adjust tie rod alignment. All tie rod adjustments should be
performed by an authorized Polaris dealer.

1. Position the vehicle on a level surface.
2. Place the handlebars in a straight-ahead position.
3. Tie a length of string between two stands as
shown in the illustration. Position the stands so
that the string is flush with the side of the rear
tire. If available, you may use a long straightedge instead of string.

130

Stand
String

2
1

Maintenance
Toe Alignment
4. Measure the distance from the string to the rim at the front (1) and rear (2) of the front
rim. The rear measurement should be 1/16"-1/8" (2-3 mm) more than the front measurement on each side of the vehicle to obtain the recommended 1/8" to 1/4" (3-6 mm) toe
out alignment.
5. Repeat the measurement procedure on the other side of the vehicle.
6. If you discover improper alignment, see your Polaris dealer for service.

131

Maintenance
Steering Inspection
Check the steering assembly periodically for loose nuts and bolts. If any are found, have
your dealer tighten them before operating the ATV.

Camber and Caster
The camber and caster are non-adjustable.

Shock Spring Adjustment
The rear shock absorber springs are adjustable to
increase or decrease spring tension. Rotate the adjuster
either clockwise or counter-clockwise to make adjustments.

132

Adjuster

Maintenance
Drive Chain
Lubricate the drive chain with Polaris chain spray lube or an approved chain lube at the general lubrication interval specified in the Periodic Maintenance Chart beginning on page 94.
Lubricate more often under severe use, such as in dirty or wet conditions. See page 158 for
the part numbers of Polaris products.
NOTICE: Washing the drive chain with a high pressure washer or gasoline can cause premature wear
and drive chain failure. Don't use a high pressure washer or gasoline to clean the drive
chain.
Adjusting or operating the ATV with improper rear drive chain slack can result in severe
damage to the transmission and drive components. Always make sure the slack is within the
stated specifications.

133

Maintenance
Drive Chain Slack
1. Check the amount of chain slack
by moving the vehicle slightly
forward to gain slack at the top
side of the chain.
2. The chain should have 1/4"-1/2"
(6-12 mm) deflection. If the
chain needs adjustment, use the
procedure on page 135.

1/4"-1/2" (6-12 mm)
Deflection

134

Maintenance
Drive Chain Slack Adjustment
1. Loosen the four rear housing mount
bolts.
2. Loosen the chain adjuster lock nut.
3. Turn the chain adjuster clockwise to
1/4"-1/2" (6-12 mm) deflection.
4. Tighten the chain adjuster lock nut to
18 ft. lbs. (25 Nm). Hold the adjuster
stud securely while tightening the nut
to avoid breaking the stud.
5. Tighten the four rear housing mount
bolts to 43 ft. lbs. (60 Nm).

Housing
Mount
Bolts

Chain Adjuster

135

Maintenance
Air Filter
1. Remove the seat. See page 43.
2. Release the air box cover clips and remove
the cover.
3. Remove the foam air filter. Wash the foam
filter in warm soapy water, then rinse and let
dry. If the filter is damaged, install a new
foam filter.
4. Apply a commercially available foam filter
lubricant to the foam filter.

136

Cover

Foam
Filter
Support
Screen

Gasket

Clips

Maintenance
Air Filter
5. Clean away any oil or sediments in the air box.
6. Reinstall the filter and air box cover. Secure the clips.
7. Reinstall the seat.
NOTICE: Never operate the ATV with the filter element removed. Dirt will enter the engine causing
rapid wear and severe damage to the engine.

137

Maintenance
Handlebar Adjustment
WARNING
Improper adjustment of the handlebars or incorrect torquing of the adjuster block tightening bolts can
cause limited steering or loosening of the handlebars, resulting in loss of control and possible serious
personal injury or death. Follow the adjustment procedures exactly, or see your Polaris dealer for
service.

The handlebars can be adjusted for rider preference.
1. Remove the pod to access the handlebar bolts.
Loosen the four bolts.
2. Adjust the handlebar to the desired height. Be sure
the handlebars do not hit the gas tank or any other
part of the vehicle when turned fully to the left or
right.
3. Lightly tighten each bolt equally to prevent uneven
gaps in the block. Torque the bolts to 7.3 ft. lbs. (10
Nm).
138

Bolts

Maintenance
Tires
WARNING
Operating your ATV with worn tires, improperly inflated tires, non-standard tires or improperly installed
tires will affect vehicle handling and could cause an accident resulting in serious injury or death. Always
follow all tire maintenance procedures as outlined in this manual and on the labels on the vehicle.
Always use original equipment size and type when replacing tires.

139

Maintenance
Tire Tread Depth
Always replace tires when tread depth is
worn to 1/8" (3 mm) or less.

1/8" (3 mm)

Wheel Removal
1. Stop the engine and lock the parking brake.
2. Loosen the wheel bolts slightly.
3. Elevate the side of the vehicle by placing a
suitable stand under the footrest frame.
4. Remove the wheel bolts and remove the
wheel.

140

Wheel
Bolts

Maintenance
Wheel Installation
1. Lock the parking brake.
2. Place the wheel in the correct position on the wheel hub. Be sure the valve stem is
toward the outside and rotation arrows on the tire point toward forward rotation.
3. Install the wheel bolts and finger tighten them.
4. Lower the vehicle to the ground.
5. Securely tighten the bolts to 22 ft. lbs. (30 Nm).

Axle and Wheel Nuts
All nuts with a cotter pin installed must be service by an authorized Polaris dealer.

Wheel Hub Tightening
Front wheel bearing tightness and spindle nut retention are critical component operations.
All service must be performed by your authorized Polaris dealer.

141

Maintenance
Tail Light Lamp Replacement
If the brakelight doesn't work, the lamp may
need to be replaced.
1. Remove the two screws securing the lens
cover. Remove the lens cover.
2. Remove the lamp and replace it with a
new recommended lamp.
3. Test the light for proper operation.
4. Reinstall the lens cover.

142

Lamp
Cover

Screws

Maintenance
Daytime Running Lights Lamp Replacement
If the daytime running lights do not operate, replace the lamps. Polaris recommends that you
install replacement lamps obtained from your authorized Polaris dealer.
1. Disconnect the lights from the harness.
2. Remove the rubber cover from the back of the light assembly.
3. Press the lamp retainer inward and turn it counter-clockwise to remove it. Note the position of the lamp positioning tab, then carefully pull the lamp out.
4. Install the new lamp. Make sure the filament is horizontal.
5. Reinstall the lamp retainer. Press the retainer inward and turn it clockwise about 1/4 turn.
6. Start the engine to make sure the lights come on. If the lights do not operate, see your
Polaris dealer for service.
7. Reinstall the rubber cover, and reconnect the lights to the harness.

143

Maintenance
Battery
WARNING
Improperly connecting or disconnecting battery cables can result in an explosion and cause serious
injury or death. When removing the battery, always disconnect the negative (black) cable first. When
reinstalling the battery, always connect the negative (black) cable last.

The battery in your Polaris ATV is a sealed battery. The sealing strip cannot be removed.
Never add water to this type of battery.
Keep the battery terminals and connections free of corrosion. If cleaning is necessary,
remove the corrosion with a stiff wire brush. Wash with a solution of one tablespoon baking
soda and one cup water. Rinse well with tap water and dry off with clean shop towels. Coat
the terminals with dielectric grease or petroleum jelly.

144

Maintenance
Battery
Battery Removal

1. Remove the three bolts securing the battery
mounting bracket to the vehicle.
2. Remove the mounting bracket and battery.
3. Disconnect the black (negative) battery cable
first. Disconnect the red (positive) battery
cable last.
4. Loosen the two nuts securing the battery plate
to the top of the battery. Remove the plate.
5. Lift the battery out of the mounting bracket.

Mounting
Bracket Bolts

145

Maintenance
Battery
Battery Installation

Always install a fully charged battery. Using a new battery that has not been fully charged
can damage the battery and result in a shorter life. It can also hinder vehicle performance. If
recharging is necessary, use a .5 amp battery charger.
1. Place the fully charged battery in the mounting bracket. Reinstall the battery plate and
tighten the two nuts securely to retain the battery in the mounting bracket.
2. Connect and tighten the red (+) cable first. Connect and tighten the black (-) cable last.
Torque the battery terminal bolts to 3.5 ft. lbs. (4.7 Nm).
3. Install the mounting bracket and battery to the vehicle. Tighten the three bolts.
4. Verify that battery cables are properly routed.
Battery Storage

Whenever the vehicle is not used for a period of three months or more, remove the battery
from the vehicle, ensure that it's fully charged, and store it out of the sun in a cool, dry place.
Check battery voltage each month during storage. Recharge as needed to maintain a full
charge.
146

Maintenance
Cleaning
Keeping your ATV clean will not only improve its appearance but it can also extend the life
of various components.
NOTICE: High water pressure may damage components. Polaris recommends washing the vehicle by
hand or with a garden hose, using mild soap.
Certain products, including insect repellents and chemicals, will damage plastic surfaces.
Do not allow these types of products to contact the vehicle.

147

Maintenance
Cleaning
Washing the ATV

The best and safest way to clean your Polaris vehicle is with a garden hose and a pail of mild
soap and water.
1. Use a professional-type washing cloth, cleaning the upper body first and the lower parts
last.
2. Rinse with clean water frequently.
3. Dry surfaces with a chamois to prevent water spots.
Washing Tips

•
•
•
•

Avoid the use of harsh cleaners, which can scratch the finish.
Do not use a power washer to clean the vehicle.
Do not use medium to heavy duty compounds on the finish.
Always use clean cloths and pads for cleaning and polishing. Old or reused cloths and
pads may contain dirt particles that will scratch the finish.

148

Maintenance
Cleaning
Washing the ATV

If a high pressure water system is used for cleaning (not recommended), exercise extreme
caution. The water may damage components and could remove paint and decals. Avoid
directing the water stream at the following items:
• Wheel bearings
• Cab and body panels
• Radiator
• Labels and decals
• Transmission seals
• Electrical components and wiring
• Brakes
If warning and safety labels are damaged, contact your Polaris dealer for free replacement.
Grease all zerk fittings immediately after washing. Allow the engine to run for a while to
evaporate any water that may have entered the engine or exhaust system.

149

Maintenance
Polishing
Polaris recommends the use of common household aerosol furniture polish for polishing the
finish on your Polaris vehicle. Follow the instructions on the container.
Polishing Tips

• Avoid the use of automotive products, some of which can scratch the finish of your vehicle.
• Always use clean cloths and pads for cleaning and polishing. Old or reused cloths and
pads may contain dirt particles that will scratch the finish.

150

Maintenance
Storage
Exterior

Make necessary repairs and clean the vehicle as recommended. See page 147.
Battery Storage

Remove the battery from the vehicle, ensure that it's fully charged, and store it out of the sun
in a cool, dry place. Check battery voltage each month during storage and recharge as needed
to maintain a full charge.

151

Maintenance
Storage
Stabilize the Fuel

Polaris Carbon Clean is a fuel stabilizer and fuel system dryer. It cleans the fuel system, the
combustion chamber and the exhaust ports. It also prevents bacterial growth and promotes
better starting after the storage period.
1. Fill the fuel tank.
2. Add Polaris Carbon Clean Fuel Treatment or Polaris Fuel Stabilizer. Follow the instructions on the container for the recommended amount. Carbon clean will also reduce the
possibility of bacterial growth in the fuel system.
3. Start the engine and allow it to run for 15-20 minutes so the stabilizer can disperse
through the fuel in the tank and carburetor.
4. Stop the engine.
5. Turn the fuel valve off.
6. Drain the carburetor bowl.

152

Maintenance
Storage
Engine Oil

Change the oil. See page 106.
Air Filter / Air Box

Inspect and clean (or replace) the pre-cleaner and air filter. Clean the air box. Drain the sediment tube.
Fluid Levels

Inspect fluid levels. Change fluids as recommended in the Periodic Maintenance Chart
beginning on page 94.
• Transmission Oil
• Engine Oil
• Brake Fluid

153

Maintenance
Storage
Lubricate

Inspect all cables and lubricate all areas of the vehicle as recommended in the Periodic Maintenance Chart beginning on page 94.
Storage Area/Covers

1. Make sure tire pressure is at specification.
2. Using suitable supports under the frame, raise the vehicle slightly so that the tires are not
touching the ground.
3. Be sure the storage area is well ventilated.
4. Cover the vehicle with an appropriate cover. Do not use plastic or coated materials. They
do not allow enough ventilation to prevent condensation, and may promote corrosion
and oxidation.

Accessories
Polaris has a wide range of accessories available for your ATV. Please see your Polaris
dealer.
154

Maintenance
Transporting the ATV
1. Stop the engine. Place the transmission in gear. Lock the parking brake.
2. Secure the fuel cap, oil cap and seat. Turn the fuel valve off.
NOTICE: Always tie the frame of the ATV to the transporting unit securely with suitable straps or rope.
The rack, bumper or handlebars do not offer enough support for tie-down while transporting.

3. Attach the front tie strap to the frame tubes (not to the bumper tubes).
4. Wrap the rear tie strap around the grab bar.

Step 3

Step 4

155

Specifications
Outlaw 50
Rider Capacity
Maximum Weight Capacity
Displacement
Cooling
Engine type
Lubrication
Oil Capacity
Fuel Capacity
Fuel Reserve Capacity
Starting
Drive System
Final Drive
Front Suspension
Rear Suspension
156

1 Rider
90 lbs. (41 kg)
49cc
Air Cooled
4-Stroke
Wet Sump
30 oz. (900 ml)
1.2 gallons (4.5 liters)
.22 gallons (.85 liters)
Electric with kick-start backup
Automatic CVT
Chain
Single control arm with 3" (7.6 cm) of travel
Spring over shock with 3" (7.6 cm) of travel

Specifications
Outlaw 50
Front/Rear Brakes
Parking Brake
Front Tires
Rear Tires
Dry Weight
Length/Width/Height
Wheel Base
Ground Clearance
Brake Light
Daytime Running Lights

Drum
Mechanical Lock
16 x 6.5 - 7 (2 psi/13.8 kPa)
16 x 8 - 7 (2 psi/13.8 kPa)
210 lbs. (95.3 kg)
48" (122 cm) / 31.5" (80 cm) / 28" (71 cm)
33" (84 cm)
4" (10 cm)
Standard
Standard

157

Polaris Products
Part Number
2876248
2876249
2872175
2872176
2870791
2873602
2872348

158

Description
Engine Lubricant
Synthetic Youth Oil (qt/.95 l)
Synthetic Youth Oil (gal/3.8 l)
Semi-Synthetic 20W-40 Oil (qt/.95 l)
Semi-Synthetic 20W-40 Oil (gal/3.8 l)
Fogging Oil, Aerosol
Gearcase / Transmission Lubricants
Premium AGL Synthetic Gearcase Lubricant (qt/.95 l)
Chain Lube, Aerosol

Polaris Products
Part Number
2871322
2871423
2871326

Description
Grease
All Season Premium Grease (3 oz./89 ml)
All Season Premium Grease (14 oz./414 ml)
Miscellaneous Additives
Carbon Clean Plus

159

Troubleshooting
See your Polaris dealer if you're unable to identify solutions using the following charts.

Engine Turns Over, Fails to Start
Possible Cause

Solution

Out of fuel

Turn the fuel valve to reserve, refuel

Clogged fuel valve or filter

Inspect and clean or replace

Water is present in fuel

Drain the fuel system and refuel

Fuel valve is turned off

Turn the fuel valve on

Old or non-recommended fuel

Replace with new fuel

Fouled or defective spark plug(s)

Inspect plug(s), replace if necessary

No spark to spark plug

Inspect plug(s), verify stop switch is on

Crankcase filled with water or fuel

Immediately see your Polaris dealer

Overuse of choke

Inspect, clean and/or replace spark plugs

Clogged fuel filter

Replace the filter

Low battery voltage

Recharge battery with .5 amp charger

Mechanical failure

See your Polaris dealer

160

Troubleshooting
Engine Doesn’t Turn Over
Possible Cause

Solution

Low battery voltage

Recharge battery with .5 amp charger

Loose battery connections

Check all connections and tighten

Loose solenoid connections

Check all connections and tighten

Engine Pings or Knocks
Possible Cause

Solution

Poor quality or low octane fuel

Replace with recommended fuel

Incorrect ignition timing

See your Polaris dealer

Incorrect spark plug gap or heat range

Set gap to specs or replace plugs

161

Troubleshooting
Engine Backfires
Possible Cause

Solution

Weak spark from spark plugs

Inspect, clean and/or replace spark plugs

Incorrect spark plug gap or heat range

Set gap to specs or replace plugs

Old or non-recommended fuel

Replace with new fuel

Incorrectly installed spark plug wires

See your Polaris dealer

Incorrect ignition timing

See your Polaris dealer

Mechanical failure

See your Polaris dealer

Exhaust system leak

See your Polaris dealer

162

Troubleshooting
Engine Runs Irregularly, Stalls or Misfires
Possible Cause

Solution

Fouled or defective spark plugs

Inspect, clean and/or replace spark plugs

Worn or defective spark plug wires

See your Polaris dealer

Incorrect spark plug gap or heat range

Set gap to specs or replace plugs

Loose ignition connections

Check all connections and tighten

Water present in fuel

Replace with new fuel

Low battery voltage

Recharge battery with .5 amp charger

Kinked or plugged fuel vent line

Inspect and replace

Incorrect fuel

Replace with recommended fuel

Clogged air filter

Inspect and clean or replace

Electronic throttle control malfunction

See your Polaris dealer

Other mechanical failure

See your Polaris dealer

163

Troubleshooting
Engine Runs Irregularly, Stalls or Misfires
Possible Lean Fuel Mixture Cause

Solution

Low or contaminated fuel

Add or change fuel, clean the fuel system

Low octane fuel

Replace with recommended fuel

Clogged fuel filter

Replace filter

Incorrect jetting

See your Polaris dealer

Possible Rich Fuel Mixture Cause

Solution

Overuse of choke

Inspect, clean and/or replace spark plugs

Fuel is very high octane

Replace with lower octane fuel

Incorrect jetting

See your Polaris dealer

164

Troubleshooting
Engine Stops or Loses Power
Possible Cause

Solution

Out of fuel

Turn the fuel valve to reserve, refuel

Kinked or plugged fuel vent line

Inspect and replace

Water present in fuel

Replace with new fuel

Overuse of choke

Inspect, clean and/or replace spark plugs

Fouled or defective spark plugs

Inspect, clean and/or replace spark plugs

Worn or defective spark plug wires

See your Polaris dealer

Incorrect spark plug gap or heat range

Set gap to specs or replace plugs

Loose ignition connections

Check all connections and tighten

Low battery voltage

Recharge battery with .5 amp charger

Incorrect fuel

Replace with recommended fuel

Clogged air filter

Inspect and clean or replace

Electronic throttle control malfunction

See your Polaris dealer

Other mechanical failure

See your Polaris dealer

165

Declaration of Conformity
Polaris Industries Inc.,
2100 Hwy 55, Medina, MN 55340 U.S.A.
Telephone 763-542-0500

We, Polaris Industries Inc., declare that the vehicles listed below conform to the essential health and safety
requirements applicable to off-road all-terrain vehicles.
APPLICABLE EUROPEAN DIRECTIVES
98/37/EC as amended (Machinery Directive)
2004/108/EC as amended (EMC Directive)

166

TEST / EVALUATION METHODS
EN 1050 hazard analysis
CD 77/311/EEC driver-perceived noise level
CISPR 12:2001
EN 55012:2002
CAN/CSA-C108.4-M92
EN 61000-6-2:2001

Declaration of Conformity
PRODUCT IDENTIFICATION
VEHICLE SERIES

TRADE NAME

MODEL
YEARS

SOUND
PRESSURE
dB (A)

___KA05__
___KA09__
___FA09__
___VA17__
___PB20__
___BA32__
___CA32__
___BA50__
___GJ45__
___GJ52__, ___GP52__
___LH27__
___LH46__
___MN50__
___ZN55__ ___ZX55__
___TN55__, ___DN55__

OUTLAW 50
OUTLAW 90
SPORTSMAN 90
RZR 170
PHOENIX 200
TRAIL BLAZER 330
TRAIL BOSS 330
SCRAMBLER 500
OUTLAW 450
OUTLAW 525
SPORTSMAN 300
SPORTSMAN 400
SPORTSMAN 500 EFI
SPORTSMAN 550 EFI
SPORTSMAN X2/TOURING 550

2008, 2009, 2010
2008, 2009, 2010
2008, 2009, 2010
2009, 2010
2008, 2009, 2010
2008, 2009, 2010
2008, 2009, 2010
2008, 2009, 2010
2008, 2009, 2010
2008, 2009, 2010
2008, 2009, 2010
2008, 2009, 2010
2008, 2009, 2010
2009, 2010
2010

76.8
76.8
76.8
81.3
76.8
76.8
76.8
79.6
80.7
80.7
81.1
80.2
80.4
80.8
77.2

167

Declaration of Conformity
VEHICLE SERIES

TRADE NAME

MODEL
YEARS

SOUND
PRESSURE
dB (A)

___MN76__
___TN85__, ___DN85__
___CL76__
___ZN85__, ___ZX85__
___RH50__, ___HH50__
___HH76__
___WH76__
___HR__
___HY__
___VH76__

SPORTSMAN 800
SPORTSMAN X2/TOURING 850
SPORTSMAN 800 6X6
SPORTSMAN 850 EFI
RANGER 500 EFI 4X4
RANGER 800 EFI 4X4
RANGER 800 EFI CREW
RANGER 800 6X6
RANGER HD 800 4X4
RANGER RZR

2008, 2009, 2010
2010
2009, 2010
2009, 2010
2009, 2010
2010
2010
2010
2010
2008, 2009, 2010

83.6
77.2
80.1
80.4
76.5
76.5
76.5
76.5
76.5
85.8

Authorized Signatory:
__________________________________
Alexander A. Kennedy, Product Compliance
Polaris Industries Inc., Engineering Operations
301 5th Avenue SW, Roseau, MN 56751

168

LIMITED WARRANTY

Warranty

Polaris Sales Inc., 2100 Highway 55, Medina, MN 55340, gives a SIX MONTH LIMITED WARRANTY on all
components of the Polaris All Terrain Vehicle (ATV) against defects in material or workmanship. Polaris also
gives a one year limited warranty on the final drive chain for failure due to defects. This warranty covers the parts
and labor charges for repair or replacement of defective parts which are covered by this warranty. This warranty
begins on the date of purchase. This warranty is transferable to another consumer during the warranty period
through a Polaris dealer.

REGISTRATION
At the time of sale, the Warranty Registration Form must be completed by your dealer and submitted to Polaris
within ten days. Upon receipt of this registration, Polaris will record the registration for warranty. No verification
of registration will be sent to the purchaser as the copy of the Warranty Registration Form will be the warranty
entitlement. If you have not signed the original registration and received the “customer copy”, please contact your
dealer immediately. NO WARRANTY COVERAGE WILL BE ALLOWED UNLESS YOUR ATV IS REGISTERED WITH POLARIS.
Initial dealer preparation and set-up of your ATV is very important in ensuring trouble-free operation. Purchasing
a machine in the crate or without proper dealer set-up will void your warranty coverage.

169

Warranty

WARRANTY COVERAGE AND EXCLUSIONS:

LIMITATIONS OF WARRANTIES AND REMEDIES
The Polaris limited warranty excludes any failures that are not caused by a defect in material or workmanship.
This warranty does not cover accidental damage, normal wear and tear, abuse or improper handling. This warranty also does not cover any ATV that has been altered structurally, modified, neglected, improperly maintained,
used for racing, or used for purposes other than for which it was manufactured, or for any damages which occur
during trailer transit or as a result of unauthorized service or the use of unauthorized parts. In addition, this warranty does not cover physical damage to paint or finish, stress cracks, tearing or puncturing of upholstery material, corrosion, or defects in parts, components or the ATV due to fire, explosions or any other cause beyond
Polaris' control.
Warranty does not apply to parts exposed to friction surfaces, stresses, environmental conditions and/or contamination for which they were not designed or not intended, including but not limited to the following items:
•
•
•
•
•
•
•
•

Wheels and tires
Suspension components
Brake components
Seat components
Clutches and components
Steering components
Batteries
Light bulbs/Sealed beam lamps

170

•
•
•
•
•
•
•

Finished and unfinished surfaces
Carburetor/Throttle body components
Engine components
Drive belts
Hydraulic components
Circuit breakers/Fuses
Electronic components

WARRANTY COVERAGE AND EXCLUSIONS:

Warranty

LIMITATIONS OF WARRANTIES AND REMEDIES

Warranty applies to the product only and does not allow for coverage of personal loss. Some items are considered
"consumable," meaning they are considered part of normal maintenance or part of completing an effective repair.
The following items are excluded from warranty coverage in the event of a warranty claim:
•
•
•
•
•
•
•
•

Spark Plugs
Filters
Fuel
Sealants
Hotel fees
Towing charges
Mileage
Rentals/Loss of product use

•
•
•
•
•
•
•
•

Lubricants such as oil, grease, etc.
Batteries (unless defective)
Cosmetic damage/repair
Coolants
Meals
Shipping/ handling fees
Product pick-up/delivery
Loss of vacation/personal time

171

Warranty

WARRANTY COVERAGE AND EXCLUSIONS:

LIMITATIONS OF WARRANTIES AND REMEDIES
This warranty also excludes failures resulting from improper lubrication; improper engine timing; improper fuel;
surface imperfections caused by external stress, heat, cold or contamination; operator error or abuse; improper
component alignment, tension, adjustment or altitude compensation; failure due to snow, water, dirt or other foreign substance ingestion/contamination; improper maintenance; modified components; use of aftermarket components resulting in failure; unauthorized repairs; repairs made after the warranty period expires or by an
unauthorized repair center; use of the product in competition or for commercial purposes. Warranty will not apply
to any product which has been damaged by abuse, accident, fire or any other casualty not determined a defect of
materials or workmanship.
This warranty does not cover the use of unauthorized lubricants, chemicals, or fuels that are not compatible with
the ATV. The exclusive remedy for breach of this warranty shall be, at Polaris' exclusive option, repair or replacement of any defective materials, or components or products. THE REMEDIES SET FORTH IN THIS WARRANTY ARE THE ONLY REMEDIES AVAILABLE TO ANY PERSON FOR BREACH OF THIS
WARRANTY. POLARIS SHALL HAVE NO LIABILITY TO ANY PERSON FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES OF ANY DESCRIPTION, WHETHER ARISING OUT OF EXPRESS
OR IMPLIED WARRANTY OR ANY OTHER CONTRACT, NEGLIGENCE, OR OTHER TORT OR OTHERWISE. Some states do not permit the exclusion or limitation of incidental or consequential damages or implied
warranties, so the above limitations or exclusions may not apply to you if inconsistent with controlling state law.

172

WARRANTY COVERAGE AND EXCLUSIONS:

Warranty

LIMITATIONS OF WARRANTIES AND REMEDIES
ALL IMPLIED WARRANTIES (INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE LIMITED IN DURATION TO
THE ABOVE SIX MONTH WARRANTY PERIOD. POLARIS FURTHER DISCLAIMS ALL EXPRESS
WARRANTIES NOT STATED IN THIS WARRANTY. Some states do not allow limitations on how long an
implied warranty lasts, so the above limitation may not apply to you if inconsistent with controlling state law.

173

Warranty

HOW TO OBTAIN WARRANTY SERVICE

If your ATV requires warranty service, you must take it to a Polaris dealer authorized to repair Polaris ATVs.
When requesting warranty service you must present your copy of the Warranty Registration form to the dealer.
(THE COST OF TRANSPORTATION TO AND FROM THE DEALER IS YOUR RESPONSIBILITY). Polaris
suggests that you use your original selling dealer; however, you may use any Polaris Servicing Dealer to perform
warranty service.
Please work with your dealer to resolve any warranty issues. Should your dealer require any additional assistance
they will contact the appropriate personnel at Polaris.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
If any of the above terms are void because of state or federal law, all other warranty terms will remain in effect.
Recommended Lubricants
1. Mixing oil brands or using non-recommended oil may cause engine damage. We recommend the use of Polaris
engine oil.
2. Damage resulting from the use of non-recommended lubricants may not be covered by warranty.
Spark Arrestor
Polaris warrants that the spark arrestor in this vehicle will meet the efficiency requirements of USFS standard
5100-1c for at least 1000 hours when subjected to normal use and when maintenance and installation are in accordance with Polaris recommendations.

174

EXPORTED VEHICLES

Warranty

EXCEPT WHERE SPECIFICALLY REQUIRED BY LAW, THERE IS NO WARRANTY OR SERVICE BULLETIN COVERAGE ON THIS VEHICLE IF IT IS SOLD OUTSIDE THE COUNTRY OF THE SELLING
DEALER'S AUTHORIZED LOCATION.
This policy does not apply to vehicles that have received authorization for export from Polaris Industries. Dealers
may not give authorization for export. You should consult an authorized dealer to determine this vehicle's warranty or service bulletin coverage if you have any questions.
This policy does not apply to vehicles registered to government officials or military personnel on assignment outside the country of the selling dealer's authorized location.
This policy does not apply to Safety Recalls.
How to Get Service
In the country where your vehicle was purchased:
Warranty or Service Bulletin repairs must be done by an authorized Polaris dealer. If you move or are traveling
within the country where your vehicle was purchased, Warranty or Service Bulletin repairs may be requested
from any authorized Polaris dealer who sells the same line as your vehicle.
Outside the country where your vehicle was purchased:
If you are traveling temporarily outside the country where your vehicle was purchased, you should take your
vehicle to an authorized Polaris dealer. You must show the dealer photo identification from the country of the selling dealer's authorized location as proof of residence. Upon residence verification, the servicing dealer will be
authorized to perform the warranty repair.

175

Warranty

EXPORTED VEHICLES

How to Get Service
If You Move:
If you move to another country, be sure to contact Polaris Customer Assistance and the customs department of the
destination country before you move. Vehicles importation rules vary considerably from country to country. You
may be required to present documentation of your move to Polaris Industries in order to continue your warranty
coverage. You may also be required to obtain documentation from Polaris Industries in order to register your
vehicle in your new country.
If Purchased From A Private Party:
If you purchase a Polaris product from a private citizen, to be kept and used outside of the country in which the
vehicle was originally purchased, all warranty coverage will be denied.
Notice
If your vehicle is registered outside of the country where it was purchased, and you have not followed the procedure set out above, your vehicle will no longer be eligible for warranty or service bulletin coverage of any kind.
(Vehicles registered to Government officials or military personnel on assignment outside of the country where the
vehicle was purchased will continue to be covered by the basic warranty.)
For questions call Polaris Customer Assistance:
United States: 1-888-704-5290
Canada: 1-204-925-7100

176

U.S.A. EPA Emissions Limited Warranty

Warranty

This emissions limited warranty is in addition to the Polaris standard limited warranty for your vehicle. Polaris
Industries Inc. warrants that at the time it is first purchased, this emissions-certified vehicle is designed, built and
equipped so it conforms with applicable U.S. Environmental Protection Agency emission regulations. Polaris
warrants that the vehicle is free from defects in materials and workmanship that would cause it to fail to meet
these regulations.
The warranty period for this emissions-certified vehicle starts on the date the vehicle is first purchased and continues for a period of 250 hours of engine operation, 2500 kilometers (1550 miles) of vehicle travel, or 30 calendar months from the date of purchase, whichever comes first.
This emissions limited warranty covers components whose failure increases the vehicle’s regulated emissions,
and it covers components of systems whose only purpose is to control emissions. Repairing or replacing other
components not covered by this warranty is the responsibility of the vehicle owner. This emissions limited warranty does not cover components whose failure does not increase the vehicle’s regulated emissions.

177

Warranty

U.S.A. EPA Emissions Limited Warranty
For exhaust emissions, emission-related components include any engine parts related to the following systems:
• Air-induction system
• Fuel system

• Ignition system
• Exhaust gas recirculation systems

The following parts are also considered emission-related components for exhaust emissions:
• Aftertreatment devices
• Crankcase ventilation valves

• Sensors
• Electronic control units

The following parts are considered emission-related components for evaporative emissions:
•
•
•
•
•
•
•
•
•

Fuel Tank
Fuel Cap
Fuel Line
Fuel Line Fittings
Clamps*
Pressure Relief Valves*
Control Valves*
Control Solenoids*
Electronic Controls*

•
•
•
•
•
•
•
•
•

Vacuum Control Diaphragms*
Control Cables*
Control Linkages*
Purge Valves
Vapor Hoses
Liquid/Vapor Separator
Carbon Canister
Canister Mounting Brackets
Carburetor Purge Port Connector

*As related to the evaporative emission control system.

178

U.S.A. EPA Emissions Limited Warranty

Warranty

The exclusive remedy for breach of this limited warranty shall be, at the exclusive option of Polaris, repair or
replacement of any defective materials, components or products. THE REMEDIES SET FORTH IN THIS LIMITED WARRANTY ARE THE ONLY REMEDIES AVAILABLE TO ANY PERSON FOR BREACH OF THIS
WARRANTY. POLARIS SHALL HAVE NO LIABILITY TO ANY PERSON FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES OF ANY DESCRIPTION,WHETHER ARISING OUT OF EXPRESS
OR IMPLIED WARRANTY OR ANY OTHER CONTRACT, NEGLIGENCE OR OTHER TORT OR OTHERWISE.
ALL IMPLIED WARRANTIES (INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE LIMITED IN DURATION TO
THE WARRANTY PERIOD DESCRIBED HEREIN. POLARIS DISCLAIMS ALL EXPRESS WARRANTIES
NOT STATED IN THIS WARRANTY. Some states do not allow limitations on how long an implied warranty
lasts, so the above limitation may not apply if it is inconsistent with the controlling state law.

179

Warranty

U.S.A. EPA Emissions Limited Warranty
This limited warranty excludes failures not caused by a defect in material or workmanship.This limited warranty
does not cover damage due to accidents, abuse or improper handling, maintenance or use. This limited warranty
also does not cover any engine that has been structurally altered, or when the vehicle has been used in racing
competition. This limited warranty also does not cover physical damage, corrosion or defects caused by fire,
explosions or other similar causes beyond the control of Polaris.
Owners are responsible for performing the scheduled maintenance identified in the owner's manual. Polaris may
deny warranty claims for failures that have been caused by the owner’s or operator’s improper maintenance or
use, by accidents for which Polaris has no responsibility, or by acts of God.
Any qualified repair shop or person may maintain, replace, or repair the emission control devices or systems on
your vehicle. Polaris recommends that you contact an authorized Polaris dealer to perform any service that may
be necessary for your vehicle. Polaris also recommends that you use only Pure Polaris parts. It is a potential violation of the Clean Air Act if a part supplied by an aftermarket parts manufacturer reduces the effectiveness of the
vehicle's emission controls. Tampering with emission controls is prohibited by federal law.
If you have any questions regarding your warranty rights and responsibilities, please contact the Polaris Warranty
Department at 1-888-704-5290.

180

Maintenance Log
Present this section of your manual to your dealer each time your vehicle is serviced. This will provide you and
future owners with an accurate log of maintenance and services performed.
DATE

SERVICE
INTERVAL

TECHNICIAN

SERVICE PERFORMED / COMMENTS

10 Hours
(Break-in)

40 Hours

50 Hours

80 Hours

181

Maintenance Log
DATE

SERVICE
INTERVAL

100 Hours

120 Hours

150 Hours

182

TECHNICIAN

SERVICE PERFORMED / COMMENTS

Maintenance Log
DATE

SERVICE
INTERVAL

TECHNICIAN

SERVICE PERFORMED / COMMENTS

183

Maintenance Log
DATE

184

SERVICE
INTERVAL

TECHNICIAN

SERVICE PERFORMED / COMMENTS

Index
A

Accessories . . . . . . . . . . . . . . . . . 154
Age Restrictions . . . . . . . . . . . . . . 13
Air Filter . . . . . . . . . . . . . . . . 136-137
Axle and Wheel Nuts . . . . . . . . . 141

Battery
Installation and Connections 146
Removal. . . . . . . . . . . . . . . . 145
Storage . . . . . . . . . . . . . 146, 151
Boots . . . . . . . . . . . . . . . . . . . . . . . 11
Brake Adjustment, Front. . . . 126-127
Brake Adjustment, Rear . . . . . . . 128
Brake Freeplay . . . . . . . . . . . 125-128
Brake Freeplay Specifications . . 125
Brake Lever Travel . . . . . . . . . . . 129
Brake Levers . . . . . . . . . . . . . . . . . 44
Brake, Parking . . . . . . . . . . . . . 63-64
Brakes . . . . . . . . . . . . . . . . . . . . 62-64
Break-in Period . . . . . . . . . . . . . 70-71

Camber and Caster . . . . . . . . . . . . 132
Carburetor . . . . . . . . . . . . . . 120-121
Choke Lever. . . . . . . . . . . . . . . . . . 58
Cleaning . . . . . . . . . . . . . . . . . . . . 147
Clothing . . . . . . . . . . . . . . . . . . . . . 11
Consumer Product Safety. . . . . . . . . 9
CVT Drying . . . . . . . . . . . . . . . . . 117
CVT System. . . . . . . . . . . . . 116-117
Cylinder Head Torque . . . . . . . . . 114

Daytime Running Lights . . . . . . . 143
Drive Chain . . . . . . . . . . . . . . . . . 133
Drive Chain Slack . . . . . . . . . . . . 134
Drive Chain Slack Adjustment . . 135
Driving Downhill . . . . . . . . . . . . . . 85
Driving on a Sidehill . . . . . . . . . . . 84
Driving on Slippery Surfaces. . . . . 89
Driving Over Obstacles . . . . . . . . . 81
Driving Procedure . . . . . . . . . . . . . 79
Driving Through Water . . . . . . 90-91
Driving Uphill . . . . . . . . . . . . . 82-83

Electronic Throttle Control . . . . . .
Emission Control Systems . . . . . .
Engine Start Button . . . . . . . . . . . .
Engine Stop Switch . . . . . . . . . . . .
Equipment Modifications . . . . . . .
Exhaust, Exposure to. . . . . . . . . . .
Eye Protection . . . . . . . . . . . . . . . .

61
93
59
58
12
15
11

Fuel Filter . . . . . . . . . . . . . . . . . . 109
Fuel Safety . . . . . . . . . . . . . . . . . . 15
Fuel Stabilizer . . . . . . . . . . . . . . . 152
Fuel System . . . . . . . . . . . . . . . . . . 65
Fuel Valve . . . . . . . . . . . . . . . . . . . 66

Gas Cap . . . . . . . . . . . . . . . . . . 43, 65
Gasoline Handling. . . . . . . . . . . . . 15
Gearcase Capacity . . . . . . . . . . . . 111
Gloves . . . . . . . . . . . . . . . . . . . . . . 11

185

Index
H

Handlebar Adjustment . . . . . . . . . 138
Helmet . . . . . . . . . . . . . . . . . . . . . . 10
Horn . . . . . . . . . . . . . . . . . . . . . . . . 59
Horn Button . . . . . . . . . . . . . . . . . . 41

Instruction, Operating. . . . . . . . . . . 14

Key Switch . . . . . . . . . . . . . . . . . . . 57
Kick-Start Lever. . . . . . . . . 42, 68-69
K-Turn . . . . . . . . . . . . . . . . . . . . . . 86

Lamp Replacement
Daytime Running Lights . . . . 143
Tail Light. . . . . . . . . . . . . . . . 142
Lights . . . . . . . . . . . . . . . . . . . . . . . 64
Lights, Daytime Running . . . . . . . 143
Lubrication Guide . . . . . . . . 102-103

186

Main Key Switch. . . . . . . . . . . . . . 57
Maintenance Chart. . . . . . . . . 94-101
Making Turns . . . . . . . . . . . . . . . . 80
Modifications. . . . . . . . . . . . . . . . . 12

Restrictions, Age . . . . . . . . . . . . . . 13
Riding Gear. . . . . . . . . . . . . . . . 10-11

Safe Operation Practices. . . . . . 74-75
Safety Labels and Locations . 32-37
Age Warning . . . . . . . . . . . . . . 34
Clutch Cover Warning. . . . . . . 37
Discretionary Warning . . . . . . 32
No Passenger Warning . . . . . . 36
Operation Warning . . . . . . . . . 33
Tire Pressure Warning. . . . . . . 35
Safety Training . . . . . . . . . . . . . . . 8-9
Safety Warnings . . . . . . . . . . . 13-31
Age Restrictions . . . . . . . . . . . 13
Carrying a Passenger . . . . . . . . 17
Crossing Hillsides . . . . . . . . . . 23
Descending Hills Improperly . 22
Exposure to Exhaust . . . . . . . . 15
Failure to Inspect . . . . . . . . . . . 16

Oil . . . . . . . . . . . . . . . . . . . . . . . . 104
Oil Change, Engine . . . . . . . 106-108
Oil Change, Transmission . . . . . . 111
Oil Check, Engine . . . . . . . . . . . . 105
Oil Check, Transmission . . . . . . . 110
Oil, Engine. . . . . . . . . . . . . . . . . . 104
Operator Restrictions. . . . . . . . . . . 13

Parking on a Hill or Incline . . . . . . 88
Periodic Maintenance Chart . 94-101
Polaris Products . . . . . . . . . . . . . . 158
Polishing . . . . . . . . . . . . . . . . . . . 150
Pre-Ride Inspection . . . . . . . . . 72-73

Index
S

Safety Warnings . . . . . . . . . . . 13-31
Frozen Bodies of Water . . . . . 30
Handling Gasoline . . . . . . . . . 15
Hot Exhaust Systems . . . . . . . 31
Improper Cargo Loading . . . . 29
Improper Hill Climbing . . . . . 21
Improper Tire Maintenance . . 26
Improper Modifications . . . . . 27
Jumps and Stunts . . . . . . . . . . 20
Operating a Damaged ATV . . 30
Operating at Excessive Speeds 19
Operating on Pavement . . . . . 18
Operating on Public Roads . . 18
Operating on Slippery Terrain 25
Operating on Steep Hills . . . . 21
Operating Over Obstacles . . . 27
Operating Through Water . . . 28
Operating Without Instruction 14
Physical Control of the ATV . 19
Physical Skills . . . . . . . . . . . . 30
Protective Apparel . . . . . . . . . 16

Safety Warnings . . . . . . . . . . . 13-31
Skidding or Sliding . . . . . . . . . 27
Stalling While Climbing a Hill 24
Turning Improperly. . . . . . . . . 20
Unauthorized Use of the ATV 31
Unfamiliar Terrain . . . . . . . . . 26
Using Alcohol or Drugs . . . . . 17
Safety Words and Symbols . . . . . . . 6
Seat Latch. . . . . . . . . . . . . . . . . . . . 43
Severe Use . . . . . . . . . . . . . . . . . . . 95
Shock Spring Adjustment . . . . . . 132
Sidehilling . . . . . . . . . . . . . . . . . . . 84
Signal words. . . . . . . . . . . . . . . . . . . 6
Spark Arrestor . . . . . . . . . . . 118-119
Spark Plug Change. . . . . . . . . . . . 113
Spark Plugs . . . . . . . . . . . . . 112-113
Specifications . . . . . . . . . . . . 156-157
Speed Control System . . . . . 122-123
Start Button . . . . . . . . . . . . . . . . . . 59
Starting the Engine. . . . . . . . . . 76-77
Steering Inspection. . . . . . . . . . . . 132

Stop Switch . . . . . . . . . . . . . . . . . . 58
Stopping the ATV . . . . . . . . . . . . . 46
Stopping the Engine . . . . . . . . . . . 78
Storage. . . . . . . . . . . . . . . . . . 151-154
Switches
Engine Start Button . . . . . . . . 59
Engine Stop Switch . . . . . 41, 58
Horn Button . . . . . . . . . . . . . . 41
Ignition Switch. . . . . . . . . . . . 45
Main Key Switch . . . . . . . . . . 57
Tether Switch . . . . . . . . . . . . . 45

Tail Light. . . . . . . . . . . . . . . . . . . 142
Tether Strap . . . . . . . . . . . . . . . . . . 45
Throttle . . . . . . . . . . . . . . . . . . . . . 60
Throttle Cable Adjustment . . . . . 124
Throttle Control. . . . . . . . . . . . . . . 41
Throttle Lever . . . . . . . . . . . . . . . . 61
Throttle Stop Speed Control . . . . 123

187

Index
T

Tire Tread Depth . . . . . . . . . . . . . 140
Tires . . . . . . . . . . . . . . . . . . . . . . . 139
Toe Alignment . . . . . . . . . . . 130-131
Transmission . . . . . . . . . . . . 116-117
Transmission Oil . . . . . . . . . 110-111
Transporting the ATV . . . . . . . . . 155
Turning Around on a Hill. . . . . 86-87

188

Vehicle Identification Numbers . . 56
Vehicle Immersion . . . . . . . 114-115

Warranty . . . . . . . . . . . . . . . 177-180
Warranty, Emissions . . . . . . 177-180
Washing the ATV . . . . . . . . . . . . 148
Wheel Hub Tightening . . . . . . . . 141
Wheel Installation . . . . . . . . . . . . 141
Wheel Nuts . . . . . . . . . . . . . . . . . 141
Wheel Removal . . . . . . . . . . . . . . 140

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Author                          : Provided By MANUALSLIB.COM - http://www.manualslib.com/
Create Date                     : 2012:05:20 14:45:56Z
Keywords                        : manuals, instruction manuals, user manuals, service manuals, user guides, pdf manuals, owners manuals, installation guides
Modify Date                     : 2014:12:07 11:24:11+08:00
Subject                         : Search through 700.000 manuals online & and download pdf manuals.
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Creator                         : Provided By MANUALSLIB.COM - http://www.manualslib.com/
Description                     : Search through 700.000 manuals online & and download pdf manuals.
Title                           : ManualsLib - Makes it easy to find manuals online!
Creator Tool                    : pdftk 1.44 - www.pdftk.com
Metadata Date                   : 2014:12:07 11:24:11+08:00
Producer                        : itext-paulo-155 (itextpdf.sf.net-lowagie.com)
Document ID                     : uuid:6394b7b7-7c22-2b49-9c79-74d4d230d90f
Instance ID                     : uuid:0eba4ff0-a32a-a24b-9efb-577d14c424f6
Page Count                      : 191

EXIF Metadata provided by EXIF.tools

Polaris Outlaw 9922485 Owners Manual ManualsLib Makes It Easy To Find Manuals Online!

Navigation menu

Versions of this User Manual:

Views

Navigation