Polaroid 6057AT Weather Station Transmitter User Manual

Users Manual

Weather Station Transmitter

Battery Installation

12 3 4 5

2. Reverse the outdoor temperature transmitter.

3. Unpack the battery cover.

4.Observethecorrectpolarity,install2xAAbatteries.Makesurethebatteriesarermlysetinsidethe

transmitter or start-up problems may occur. Close the battery cover.

5. Insert the transmitter into the bracket.

Outdoor Remote Temperature Transmitter Mounting

The outdoor remote temperature transmitter can be hanged onto a wall where there is a screw.

Note: 1) The remote temperature transmitter should be placed in a dry, shaded

area. The remote temperature sensor has a range of 80 feet (25m). Any

walls that the signal will have to pass through will reduce distance. An

outdoor wall or window will have up to 10 feet of resistance. Your distance

plus resistance should not exceed 80 feet in a straight line.

2) Fog and mist will not harm your remote temperature transmitter but

direct rain MUST be avoided.

FCC Statement

1. This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference

that may cause undesired operation.

2.Changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.