Polk Audio Lci Rtsc Users Manual CustomInstallFactSheet_
LCI-RTSC to the manual 5d2e48ce-c2fb-4271-9cd8-a3c03cd66c08
2015-01-24
: Polk-Audio Polk-Audio-Lci-Rtsc-Users-Manual-335827 polk-audio-lci-rtsc-users-manual-335827 polk-audio pdf
Open the PDF directly: View PDF .
Page Count: 5
Download | |
Open PDF In Browser | View PDF |
Cutsheet for LCi-RTSC & LCi-RTSFX High Performance In-Wall Reference Theater Center Channel and Surround Loudspeakers The LCi-RTSFX speaker features an integrated "perfect volume" performance enclosure to ensure superb performance every time. Because the RTSFX performance enclosure is the same size as the cutout, the speaker installs easily in a post construction project. The RTS C requires a larger cutout because of its separate performance enclosure. An available Stud-Lock Mounting SystemTM (for the RTSFX and sold separately) creates a rigid platform, increasing bass performance, clarity and reducing unwanted structure borne vibration. Both the RTS C and RTSFX are THX® Ultra2-certified, so you're assured of consistent sonic performance and exceptional dynamic range. The same driver technologies found in Polk Audio's highly acclaimed LCi Series of freestanding and built-in speakers are used in the LCi-RTS Series. LCi-RTSC Hardware (included) • One LCi-RTSC Speaker • Enclosure • Paint Mask • Two Grilles (one perforated, one cloth) Overall Height 8-15/16" (22.6cm) • Logo Badge • LCi-RTSC Manual • Registration Card Overall Width 15-5/8" (39.7cm) • 4 Mounting Brackets • 16 Screws Overall Depth 3-3/8" (8.57cm) • 16 Washers Important Note: If anything is missing or damaged, or if your LCi-RTSC Cutout speaker fails to operate, notify Polk Audio Installer Height Support Services immediately at 800-377-7655. 7-5/8" (19.5cm) Hours: Mon.-Fri., 9am-5:30pm EST. LCi-RTSC Dimensions Overall Height Overall Width Cutout Height Cutout Width Overall Depth Mounting Depth 8-15/16" (22.6cm) 15-5/8" (39.7cm) 7-5/8" (19.5cm) 13-1/8" (33.34cm) 3-3/8" (8.57cm) 2-7/8" (7.3cm) with 1/2" of drywall Cutout Width 13-1/8" (33.34cm) Mounting Depth (Assumes 1/2" [12.7mm] drywall) 2-7/8" (7.3cm) Available Finish: Paintable White www.PolkAudio.com / 800.377.7655 (USA & Canada) / 410.358.3600 (Worldwide) 1 LCi-RTSC Note: The RTSC speaker is designed to be used as a THX® center channel speaker. It mounts between studs that are 16" OC (on center). RTSC ENCLOSURE The enclosure must be used for the RTSC to perform to THX® certified standards. Overall Height 24-1/4" (61.6cm) REMOVING THE CLOTH GRILLE The RTSC’s cloth grille fits tightly to the speaker Baffle. If you use the cloth grille, take special care when removing it. Important Note: Never use any tool, such as a paperclip, to remove the grille, as this could tear the cloth. Instead, use your hands (after you’ve washed them), grasping the grille frame near two of its mounting cups and pulling the frame firmly away from the baffle. Depth measured from the back of the enclosure to the front 3-3/8" (8.57cm) Overall Width 14" (35.56cm) SPECIFICATIONS LCi-RTSC Product Weight: 8.75 lbs. (3.97kg) (not including Performance Enclosure) WIRE RECOMMENDATIONS PERFORMANCE POWER HANDLING (WATTS/CHANNEL) Runs Lengths up to 25' Lengths greater than 25' but less than 50' Lengths greater than 50' but less than 75' Lengths greater than 75' Gauge 18 or 16 16 or 14 14 or 12 10-250W CONTINUOUS IMPEDANCE (NOMINAL) 4 OHMS FREQUENCY RESPONSE (OVERALL) 50HZ–27KHZ THX SPEC 80HZ–26KHZ EFFICIENCY (2.83V@1M) 92dB WEIGHT 12 Mount Performance Enclosure using included hardware. Run wire from any direction and plug the hole to maintain an airtight seal. SPEAKER 8.75 LBS (3.97KG) PERFORMANCE ENCLOSURE 9.25 LBS (4.25KG) DRIVER COMPLEMENT MIDBASS 2-5 1/4" (13.34CM) AERATED POLYPROPYLENE DYNAMIC BALANCE ™ DRIVERS TWEETER 1-1" (2.54CM) AIMABLE RING RADIATOR TWEETER Web Address: For more information on the LCi-RTSC, log onto www.polkaudio.com/downloads/manuals/ home/LCi-RTSC_manual.pdf CONNECTIONS SPEAKER WIRE MAXIMUM WIRE SIZE ACCOMMODATED 12 AWG MINIMUM RECOMMENDED 18 AWG INPUT CONNECTORS HEAVY-DUTY SPRING LOADED PUSH TERMINALS 2 Polk Audio Custom Install Product: Model Number LCi-RTSFX Hardware (included) • One Set of LCi-RTSFX Speakers • Speaker Mounting Template • Paint Mask • Four Grilles (two perforated, two cloth) • Logo Badge • LCi-RTSFX Manual • Registration Card • Two STL105 Stud-Lock Brackets Overall Height 21-7/8" (55.56cm) Important Note: If anything is missing or damaged, or if your LCi-RTSFX speaker fails to operate, notify Polk Audio Installer Support Services immediately at 800-377-7655. Hours: Mon.-Fri., 9am-5:30pm EST. Overall Depth 4-1/4" (10.8cm) Overall Width 12" (30.48cm) LCi-RTSFX Dimensions Overall Height Overall Width Cutout Height Cutout Width Overall Depth Mounting Depth 21-7/8" (55.56cm) 12" (30.48cm) 20-1/4" (51.44cm) 10-3/4" (27.31cm) 4-1/4" (10.8cm) 3-3/4" (9.53cm) with 1/2" of drywall Cutout Height 20-1/4" (51.44cm) Available Finish: Paintable White Cutout Width 10-3/4" (27.31cm) www.PolkAudio.com / 800.377.7655 (USA & Canada) Mounting Depth (Assumes 1/2" [12.7mm] drywall) 3-3/4" (9.53cm) / 410.358.3600 (Worldwide) 3 Stud-Lock Mounting System™ (RTSFX only) Installation: See the instructions included with each StudLock Mounting System™. Important Notes: If you are using a Pre-Construction Bracket, always install the Pre-Construction Bracket before installing the Stud-Lock Mounting System™. Be sure to clear the PreConstruction Bracket wire guide when installing the Stud-Lock Mounting System™. Important Note: For new construction: If you are using a preconstruction bracket, always install it first before installing the Stud-Lock Mounting System™ . STL105 If you are installing a pre-construction bracket (PBC) and a StudLock Mounting System (STL105) together, be aware that the speaker’s enclosure can catch on the edge of the pre-construction bracket. Push the bottom of the loudspeaker enclosure up and over The protruding edge of the pre-construction bracket. This will fully seat The loudspeaker in the wall. Center the bracket vertically in the cutout. The lip of the StudLock bracket and the cutout should align. Drywall shown cut away for clarity. SPECIFICATIONS LCi-RTSFX Installed Weight: 10.75 lbs. (4.88kg) (not including Stud-Lock Mounting System™) PERFORMANCE CONNECTIONS POWER HANDLING (WATTS/CHANNEL) 10-250W CONTINUOUS IMPEDANCE (NOMINAL) 4 OHMS FREQUENCY RESPONSE (OVERALL) 50HZ–27KHZ THX SPEC 80HZ-26KHZ EFFICIENCY (2.83V@1M) SPEAKER WIRE MAXIMUM WIRE SIZE ACCOMMODATED 12 AWG MINIMUM RECOMMENDED 18 AWG INPUT CONNECTORS PUSH TERMINALS 88dB SPEAKER WEIGHT (INSTALLED) HEAVY-DUTY SPRING LOADED 10.75 LBS (4.88KG) DRIVER COMPLEMENT MIDBASS 2-5 1/4" (13.34CM) Web Address: AERATED POLYPROPYLENE DYNAMIC BALANCE ™ DRIVERS TWEETER 1-1" (2.54CM) RING RADIATOR TWEETER 4 Polk Audio Custom Install Product: Model Number For more information on the LCi-RTSFX, log onto www.polkaudio.com/downloads/manuals/ home/LCi-RTSFX_manual.pdf REMOVING THE CLOTH GRILLE The RTSFX’s cloth grille fits tightly to the speaker Baffle. If you use the cloth grille, take special care when removing it. Center Right Left Subwoofer Important Note: Never use any tool, such as a paperclip, to remove the grille, as this could tear the cloth. Instead, use your hands (after you’ve washed them), grasping the grille frame near two of its mounting cups and pulling the frame firmly away from the baffle. LCi-RTSFX SETTING RECOMMENDATIONS RTSFX In-wall Surround Location Surround speakers located close, straight to the sides of your listening area, and approximately six feet off the floor Surround speakers located behind your listening area and approximately six feet off the floor RTSFX Image Setting Recommendation Diffuse RTSFX Surround Right Surround Left Solid Surround Back Left The “Solid” setting is required for THX ® Ultra2 Systems. Surround Back Right ROOM ENVIRONMENT CONTROLS Tweeter Switch (RTSC/RTSFX) If your listening room is very reflective, with smooth sheetrock walls, hardwood floors, and non-cushioned furniture, the sound will be overly “bright” and unnatural. Engaging the tweeter attenuation feature a Tweeter attenuation feature. Selecting the “cut” setting compensates for the effect of reflectivity in a hard room. Tweeter attenuation flattens room response, without hindering higher frequency response, for warmer, more realistic sound and more accurate imaging. Wall Distance Switch (RTSFX) In-wall and in-ceiling loudspeakers excel when placed more than 2'(60cm) from side walls. If position limitations demand that in-wall loudspeakers be installed closer than 2'(60cm) from side walls, the proximity of the surface can result in a response “bump” between 50 and 200Hz. This can cause in-wall speakers to sound “boomy.” The Wall Distance Switch flattens response and tunes out “boominess” without sacrificing deep bass response, for more lifelike sound. If placement is closer than 2' to a wall: Engage the Wall Distance Switch (“Wall Dist.”) to match the <2' setting. Recommended speaker distance from side walls is 2 feet (60cm). RTSC/RTSFX THX®Ultra2-certified Performance For THX® Ultra2-certified performance, use the cloth grille; set the Tweeter Switch (RTSc/RTSFX) to the “normal” position; on the RTSFX, set the Wall Distance Switch to the greater than two feet (>2) position. If you have questions, please contact your Authorized Polk Audio Dealer or Customer Service at 1-800-377-7655 Monday through Friday 9am-6pm EST. www.PolkAudio.com / 800.377.7655 (USA & Canada) / 410.358.3600 (Worldwide) 5
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 5 X Press Private : %%DocumentProcessColors: Cyan Magenta Yellow Black.%%DocumentCustomColors: (PANTONE 485 C).%%CMYKCustomColor: 0 .95 1 0 (PANTONE 485 C).%%EndComments Producer : QuarkXPress(tm) 6.5 Create Date : 2007:03:23 12:13:39 Title : CustomInstallFactSheet_Template Creator : QuarkXPress(tm) 6.5EXIF Metadata provided by EXIF.tools