Poly Habitat Soundscaping Enclosed Waterfall Installation Guide USCAN 2017Early 2018

User Manual: Poly Habitat Soundscaping Support | Poly, formerly Plantronics & Polycom

Open the PDF directly: View PDF .
Page Count: 23

Download
Open PDF In Browser	View PDF

Enclosed Waterfall Installation Guide
INSTALLATION + MAINTENANCE

Enclosed Waterfall

What you need for installation 3
What’s in the box 3
Uncrate the waterfall

Waterfall overview

Installation 6
First-time operation

Lighting operation (optional)

General operation: Valve overview 12
Troubleshooting

Surface cleaning and maintenance 14
Quarterly water maintenance 15
6-Month water maintenance

Yearly water maintenance

Yearly component replacement
Component replacement
Glossary

Specifications

Safety certifications

Revision date: 6.27.18
CAUTION: WHEN SERVICING YOUR WATER FEATURE MAKE SURE THAT YOU DISCONNECT ALL ELECTRICAL AND LIGHTING.
Midwest Tropical Inc • 3420 West Touhy Ave • Skokie, IL 60076 USA • Phone: (847)679-6666 • Fax: (847)679-6669

Enclosed Waterfall

What you need for installation
• 4 people to help move and position waterfall
• Distilled water
• 14 gallons of distilled water for 8 x 4 ft. waterfall
• 18 gallons of distilled water for 9 x 5 ft. and 10 x 5 ft. waterfalls

REQUIRED
•
•
•
•
•
•
•
•
•
•
•
•
•

Distilled water is absolutely required no tap water,
no spring water.

Safety gloves
Latex gloves (optional)
Electric drill
No. 2 Phillips bit
Bit holder
Pair of platform dollies
Liquid level
Ladder or scissor lift
Phillips screw driver
Tablespoon measuring spoon
Access to 120VAC 20 AMP Duplex outlet (US Standard outlet)
Extension cord (optional)
Rubber mallet

What’s in the box
Standard
Components

Waterfall
Oase® water pump (assembled)
UV (Ultraviolet) sterilizer
UV bulb and sleeve
Plastic funnel
Fill insert
Tubing
Weimans® stainless steel wipes
Novus acrylic cleaner
Plumber tape
Leveling shims
Power strip
Suction cup glass holders
Microfiber cloth
Robelle Oxidizing Shock & Swim Monopersulfate (1 lb. bag)

Optional
components

39” LED lighting fixture
Remote control with batteries

CAUTION: WHEN SERVICING YOUR WATER FEATURE MAKE SURE THAT YOU DISCONNECT ALL ELECTRICAL AND LIGHTING.
Midwest Tropical Inc • 3420 West Touhy Ave • Skokie, IL 60076 USA • Phone: (847)679-6666 • Fax: (847)679-6669

Enclosed Waterfall

Uncrate the waterfall
Uncrate the
shipping
container

Your waterfall ships inside of a wooden crate to protect the waterfall
from damage.
Your container indicates which side is the front of the waterfall.
1. Position the package so that the front is facing towards the ceiling.
2. Starting with the front panel of the shipping container, use the
drill with the No. 2 Phillips bit to remove all of the screws.
3. Remove the cardboard. The waterfall is wrapped in plastic and
surrounded by protective insulation foam. Remove the top layer
of insulation foam, but do not throw it away. You can reuse the
foam to protect the stainless steel while you move it into its final
position.
4. Remove the remaining wooden panel pieces and cardboard from
the shipping container.
5. Once all of the wood is removed, lift the waterfall to a standing
position. Leave the metal header off until the waterfall is in its
final position.
CAUTION Because the waterfall is very heavy, it is best to use
four people to move and position it.
6. Use the platform dollies to move the waterfall near its final
location, if necessary.
• To position the dollies under the base, tip the base on one
of the short edges. Roll one of the platform dollies under the
lifted base edge. Lower the base onto the platform dolly and
carefully tilt the waterfall so that the other dolly can be rolled
underneath the opposite side. Move the waterfall nearest to the
final location as possible.
• To remove from dollies, lift one side of the waterfall, remove
a dolly then rest the base onto the floor. Do the same for the
other side.

Enclosed Waterfall

Waterfall overview

Quick disconnects

Spray bar

HEADER

WATERFALL PANEL
Fill valve

Primary control
valve (intensity)

Water pump valve

Water pump
Drain valve
LED light fixture

BASE
VIEW FROM TOP
UV sterilizer lamp housing

UV outlet valve

UV inlet valve

Enclosed Waterfall

Installation
Position the
waterfall

Use a platform dolly under each end of the waterfall to move the
waterfall into position easily. Take the waterfall off the dollies and
slide into its final position.

Level the
waterfall

If the waterfall is not level, use shims to level the waterfall.
1. Placing the level on the waterfall base lid, slightly tilt the waterfall
and insert the thinnest end of a shim between the floor and the
bottom of the waterfall unit. Check the level again. Use a mallet to
tap the shim further into the underside of the base, if necessary.
Repeat the process until the base is level on all sides.
2. Once the base is level, break off or cut the exposed ends of the
shims.
3. Place the header on top of the water fall.
NOTE Because the header is heavy, it is best to use two people to
move and position it.

Install bulb in UV

Using the suction cup glass holders, remove the base lids. Remove
all packaging inside the base. The waterfall ships with the plumbing
installed except the UV bulb and bulb sleeve to prevent damage
during transit.
1. To install the bulb and sleeve, unscrew the ballast from the lamp
housing.

Ballast

Enclosed Waterfall

Installation
2. Wearing gloves or holding the bulb with a cloth (avoid touching
the bulb; oils from your skin will reduce the bulb lifespan), align
the center groove on the bulb with the pin on the inside of the
ballast.

3. Push the bulb in firmly.

4. Slide the bulb sleeve over the bulb until the rubber ring touches
the ballast housing.
5. Slide the bulb into the lamp housing. Screw the ballast back into
the lamp housing until it is hand tight. Do not overtighten!
6. Screw the lamp housing back into the base plumbing.
7. Do a quick check to make sure the UV light powers on. Look for
the three translucent rings to light up. Do not leave the light on
for more than 10 seconds. If it doesn’t illuminate, unscrew the
ballast and check to make sure the sleeve and bulb are correctly in
place.
Chase cables to
power

Chase or run the cables for the water pump, UV sterilizer, and
lighting fixture (if purchased) out of the small hole on the side/back
of the waterfall base. Ensure the cords reach the outlet. If the cords
don’t reach, use a power strip and an extension cord.
CAUTION Do not plug in any components until you’ve filled the
panel with water.
CAUTION: WHEN SERVICING YOUR WATER FEATURE MAKE SURE THAT YOU DISCONNECT ALL ELECTRICAL AND LIGHTING.
Midwest Tropical Inc • 3420 West Touhy Ave • Skokie, IL 60076 USA • Phone: (847)679-6666 • Fax: (847)679-6669

Enclosed Waterfall

Installation
1. Ensure the drain valve is closed (perpendicular to pipe).
Drain

VIEW FROM REAR

2. Connect the fill insert spout and funnel (supplied) into the fill
valve.
3. Open the fill valve (parallel to pipe).

CAUTION

Protect your waterfall and make sure to add the
water treatment before running for the first time.

Treat the water

4. Pour one tablespoon of monopersulfate powdered water
treatment (provided with purchase) into the funnel, which will
dissolve as you add the distilled water. We recommend “Robelle
Oxidizing Shock & Swim Monopersulfate.”
NOTE Treat water with 1 tablespoon monopersulfate every 6
months. See maintenance instructions on p. 15.
CAUTION Do not treat with any other additives or solutions
including chlorine, bromine, or cleaning solvents/solutions.

Fill with distilled
water

5. Using distilled water only, fill the panel until the water is 10 inches
from the bottom of the panel (5 inches above the base lid).
NOTE: The minimum water fill line indicator is located on the
clear acrylic panel near the water fill valve.

REQUIRED
Model #
G048
G059/G060

Distilled water is required.
Do not use tap water or spring water.

Dimension
4 x 8 ft.
5 x 9 ft. / 5 x 10 ft.

Water
14 gallons distilled water
18 gallons distilled water

6. Close fill valve before removing funnel and insert. Have towels on
hand for any spills.
CAUTION: WHEN SERVICING YOUR WATER FEATURE MAKE SURE THAT YOU DISCONNECT ALL ELECTRICAL AND LIGHTING.
Midwest Tropical Inc • 3420 West Touhy Ave • Skokie, IL 60076 USA • Phone: (847)679-6666 • Fax: (847)679-6669

Enclosed Waterfall

First-time operation
Double-check
valve position

Ensure the valves are in the following positions:
Valve
Position
Drain valve
Closed (perpendicular to pipe)
Primary control valve
Open (parallel to pipe)
Water pump valve
Open (parallel to pipe)
Fill valve
Closed (perpendicular to pipe)
UV inlet valve
Open (parallel to pipe)
UV outlet valve
Open (parallel to pipe)

Connect power

Connect all cables to standard US outlet or supplied power strip.
There are 3 cables with the optional lighting fixture, or 2 without it.
The waterfall and lighting fixture will power on.

Check for leaks

1. Evaluate the waterfall and check for leaks.
2. If you notice any leaks, immediately disconnect power from the
waterfall.
3. Attempt to locate the source of the leak.
4. If the quick disconnect fittings above the spray bar are leaking,
tighten them.
5. If the leak is coming from elsewhere, call us at 847-679-6666.

QUICK DISCONNECTS FROM ABOVE

Enclosed Waterfall

First-time operation
Adjust the flow

Two valves control the flow of water and must be adjusted to balance
the flow at the top and base of the panel.
Primary control valve

VIEW FROM REAR

•

UV inlet valve

Adjust the primary control valve to control the water flow
through the spray bar to create the waterfall effect. Adjust to
ensure that there are no dry spots on the panel.
Adjust the UV inlet valve flow until the fountain effect protrudes
approximately 1 inch above the water line on the left bottom side
of the panel.

Fountain effect
1 inch above waterline

Adjust lighting

If you have the optional lighting fixture, use the remote control to
customize the lighting. See pg 11.

Seal the
waterfall

Replace the header and base lids once you are satisfied with the water
flow and lighting.

Enclosed Waterfall

Lighting operation (optional)
The optional lighting fixture is installed in the base, just below the
enclosed acrylic waterfall panel.
Remote control

Your unit includes an infrared lighting remote control.
For best performance, stand close to the waterfall and aim the
remote control down towards the lighting fixture in the base.

Select color or
program

Press PROG to go into color program select mode.
Press “+” or “-” to cycle through the 24 built-in programs (8 static
colors, 8 color dreaming modes and 8 color changing modes).

aim remote control
down towards base

Presets
Press button 0 - 9 to choose a static color and the two built-in
programs:
0: black
1: red
2: green
3: blue
4: cyan

5: yellow
6: purple
7: white
8: color changing mode
9: color dreaming mode

Recommended presets
We recommend the following for office use:
color program
7: white
4: cyan
9: color dreaming mode

benefits
energize and focus
calm and productive
creativity and visual stimulation

Select brightness

Press R/G/B and press “+” and “-” buttons to adjust the intensity of
the lighting.

Select Auto Run
mode

Not recommended.
Press “AUTO RUN” to choose Auto Run/demo mode.
Press FLASH to turn on/off the flash for the Auto Run, and then
pressing “+” and “-“ buttons to adjust flash speed. Press SPEED to
control the speed of the Auto Run, and then pressing “+” and “-”
buttons to adjust it.

Select flash/
strobe effect

Not recommended.
Press FLASH to turn on/off strobe effect and press “+” or “-” to
adjust the flash speed.
CAUTION: WHEN SERVICING YOUR WATER FEATURE MAKE SURE THAT YOU DISCONNECT ALL ELECTRICAL AND LIGHTING.
Midwest Tropical Inc • 3420 West Touhy Ave • Skokie, IL 60076 USA • Phone: (847)679-6666 • Fax: (847)679-6669

Enclosed Waterfall

General operation: Valve overview
Primary control valve: Modifies the intensity of waterfall. This valve
controls the water flow through the spray bar.
UV inlet valve: Controls the water flow through the UV sterilizer and
to the fountain feature at the base of the enclosed panel.
UV outlet valve: Keep open (parallel to pipe) unless you are
servicing the UV sterilizer.
Water pump valve: Keep open (parallel to pipe) unless you are
servicing the water pump.
Fill valve: Keep closed (perpendicular to pipe) unless you are filling
the waterfall.
Drain valve: Keep closed (perpendicular to pipe) unless you are
draining the waterfall.
Fill valve

Drain valve
Primary control valve

Water pump valve

VIEW FROM REAR
UV outlet valve

UV inlet valve

Enclosed Waterfall

Troubleshooting
Symptom

Problem

Solution

Uneven water
flow

Dry spots on panel

Water flow is too low. Adjust the primary
control valve to increase flow to the spray bar.

Pump is loud/
has sucking
sound

There is not
enough water
inside the panel

Fill panel with more distilled water if the
water level is less than 4” above the base lid
when waterfall is powered on. (See page 8)

4 inches

Pump
unresponsive

Pump auto start
off

Ensure there is enough distilled water in the
panel.
Without adequate water, the pump will suck
in air and produce bubbles or interruptions
in the water supply to the header.

Leaking water

Immediately disconnect power to the
waterfall.
Tighten all disconnect fittings above the spray
bar. Check seal at top of enclosed panel and
ensure screws are fully tightened.

Lighting
unresponsive

Batteries are
depleted

Replace batteries in the remote control.

Signal interrupted

You may be too far away from the light fixture
when using the remote control:
• Stand close to the waterfall and aim the
remote control downward at the base
The base lids may be interrupting the signal:
• Remove base lids before using remote
control

Enclosed Waterfall

Surface Cleaning and Maintenance
Cleaning acrylic

CAUTION

Do not use Windex® or any ammonia-based cleaning
product. It will damage the waterfall’s acrylic surface.

CAUTION

Use only a clean microfiber cloth to wipe the acrylic
surface. Other materials may damage the surface.

Use a clean microfiber cloth to remove blemishes such as fingerprints
and dust.
For tougher stains, use:
• Novus acrylic cleaner or
• Dish-detergent-and-water mixture and clean microfiber cloth
We recommend Novus acrylic cleaner, a 3-part product for
general cleaning, scratch removing and polishing. Follow package
instructions.
Cleaning
stainless steel

We recommend Weimans® Stainless Steel Cleaner. Follow package
instructions.

Enclosed Waterfall

Quarterly Water Maintenance
Check water level every three months and refill with distilled water
if the water level is less than 4” above the base lid when waterfall is
powered on.

REQUIRED

Distilled water is required.
Do not use tap water or spring water.

6-Month Water Maintenance
1. Disconnect the waterfall from power.
2. Ensure the drain valve is closed (perpendicular to pipe).
Fill valve
Drain valve

VIEW FROM REAR

3. Connect the fill insert spout and funnel (supplied) into the fill valve.
4. Open the fill valve (parallel to pipe).
5. Pour one tablespoon of monopersulfate powdered water treatment into the
funnel, which will dissolve as you add the distilled water. We recommend
“Robelle Oxidizing Shock & Swim Monopersulfate.”
CAUTION: Do not treat with any other additives or solutions including
chlorine, bromine, or cleaning solvents/solutions.
6. Use funnel to add distilled water to 10 inches above the bottom of the panel
(5 inches above the base lid).
7. Close fill valve before removing funnel and insert. Have towels on hand for
any spills.

Enclosed Waterfall

Yearly Water Maintenance
For optimum performance, replace the water with fresh distilled
water and water treatment annually.

REQUIRED
Drain the
waterfall

Distilled water is required.
Do not use tap water or spring water.

1. Disconnect power to the waterfall
2. Prepare buckets for waste water
3. Remove front base lid
4. Connect the drain fitting to the drain insert and tubing (supplied)
or to a hose.
5. Open the drain valve (parallel to pipe)
6. Drain the unit by siphoning manually or buying and using a pump.

Add water
treatment and
distilled water

1. Close the drain valve (perpendicular to pipe).
2. See pg 8 for water filling instructions and water quantity.

Enclosed Waterfall

Yearly component replacement

CAUTION
UV sterilizer bulb
(replace yearly)

Disconnect all cables from power
when servicing the waterfall.

Pondmaster® UV Sterilizer
•
•
•
•
•
•

For optimum performance, replace bulb once every year.
It should remain on 24 hours per day throughout the year.
The bulb has a lifespan of 9000 hours before the UV output
drops below a useful level.
The UV sterilizer housing has 3 rings that will glow blue if the
bulb is still producing UV wavelength.
The bulb will produce visible light long after it has stopped
producing UV.
The valves on the UV sterilizer should remain in the on (parallel
to plumbing) position until you are ready to change UV sterilizer
or service the bulb.

Yearly bulb replacement
You will need: towels, bucket
1. Disconnect power to the waterfall
2. Turn both UV valves to the OFF position (perpendicular to
plumbing). This will prevent water from draining from the
waterfall while servicing. Water will be inside the UV fixture, so
have towels on hand.
3. Loosen the union valves at the ends of the UV to disconnect UV
fixture from waterfall.
4. Carefully remove from base and discard the leftover water into a
bucket or drain.
5. See instructions on page 7 to replace the UV bulb.
Union valve

For replacement parts contact:
Danner Mfg. Inc.
Islandia, New York 11749-1489
(631) 234-5261
www.dannermfg.com or www.amazon.com
CAUTION: WHEN SERVICING YOUR WATER FEATURE MAKE SURE THAT YOU DISCONNECT ALL ELECTRICAL AND LIGHTING.
Midwest Tropical Inc • 3420 West Touhy Ave • Skokie, IL 60076 USA • Phone: (847)679-6666 • Fax: (847)679-6669

Enclosed Waterfall

Component replacement
Pump
(replace as
needed)

Because you are using distilled water inside of an enclosed waterfall,
your waterfall pump requires little maintenance; however should
your pump fall outside of warranty, you will need to replace it.
To replace the pump:
You will need: towels, bucket, plumbers tape
1. Disconnect power to the waterfall.
2. Remove front base lid.
3. Turn the primary control and water pump valves to the OFF
position (perpendicular to pipe). This will prevent water from
draining from the waterfall while servicing. However water will
be inside the pump, so have towels on hand.
4. Remove the quick disconnects at the inlet and outlet of the
waterfall pump.
5. Carefully remove pump from base and discard the leftover water
into a bucket or drain.
6. Remove the plumbing connections and transfer them to the
replacement pump.
7. Use plumbers tape on the threads of the new pump before
transferring the piping to the new pump.
8. Ensure the piping is tightly threaded onto the new pump before
reconnecting to the quick disconnects.
9. Turn the water supply and water pump valves to the ON position
(parallel to pipe).
10. Check for leaks around the pump. Tighten fittings.
11. Connect power to the waterfall and test.

Enclosed Waterfall

Glossary
•

Base
The stainless steel enclosure that holds the plumbing assembly and optional lighting
fixture.

•

Base lids
The base lids conceal the base. To prevent damage to stainless steel, remove and replace
the lids using suction cup glass holders.

•

Header
The stainless steel cover for the acrylic panel top, spray bar and plumbing components
above the waterfall panel.

•

Plumbing assembly
Includes pump, UV sterilizer, flow control valves, drain fittings, routing.

•

Enclosed panel
The water-tight reservoir is the focal point of the waterfall.

•

Drain
Valved connection that releases water from waterfall panel.

Header

Enclosed panel

Drain

Base lids
Base
Plumbing assembly
VIEW FROM REAR
CAUTION: WHEN SERVICING YOUR WATER FEATURE MAKE SURE THAT YOU DISCONNECT ALL ELECTRICAL AND LIGHTING.
Midwest Tropical Inc • 3420 West Touhy Ave • Skokie, IL 60076 USA • Phone: (847)679-6666 • Fax: (847)679-6669

Enclosed Waterfall

Specifications
Enclosed
waterfall

• Clear acrylic, enclosed panel waterfall
• Low maintenance unit
• 39” LED color changing RGB lighting with remote control
(optional)
• Ultraviolet sterilizer to keep water clean
• Silent pump operation
• No plumbing required

Oase® Profinaut
6000 Waterfall
Pump (9 x 5 ft.,
10 x 5 ft.)

• Power requirements 120 V / 60 Hz

Oase® Neptun
2600 Waterfall
Pump (8 x 4 ft.)

• Power requirements 120 V / 60 Hz

Pondmaster® UV
Sterilizer

• 40 watt output

• Power consumption 720 W

• Power consumption 220 W

• Max flow rate to kill bacteria 2000 GPH
• Input power 120/220v

39” LED lighting
fixture with
remote control

• Power consumption 80 watts
• 18 super bright 3 watt tri-color (3 in 1) LEDs
• Beam angle: 40 degree
• Control mode: receiving IR signal
• Outdoor rated ip65
• Aluminum construction

Enclosed Waterfall

Safety Certifications
Oase® Profinaut 6000 Waterfall Pump
Oase® Neptun 2600 Waterfall PumpCertification Record

Certification Record
Customer
Customer
OASE GmbH
Aquamax 1600 SF
Tecklenburger Strasse
161,
OASE GmbH
Hörstel
Aquamax 2200
1600
SF
Aquamax
SF
Tecklenburger
Strasse
Germany
161,
48477
Hörstel
Aquamax 3000
2200 SF
SF
Aquamax
Germany

Class

CSA File
Number

Class
3851-81
0.75
1600
LIQUID PUMPS-Certified to US
Standards
3851-81
0.75
1600 to US
1.4
2200
LIQUID PUMPS-Certified
Standards

CSA File
215573
10 ft,Number
6 in.

1.4
1.8

11 ft, 6 in.
15

2200
3000

215573
10 ft, 6 in.
11

48477
Submersible or non submersible Fountain Pump, grounded, cord connected. All pumps are
Aquamax
3000
SF
1.8
3000
15 ft, 6 in.
Aquamax
3500
SF
2.6
3500
19
rated
120 V,
60 Hz
Certified in accordance with: UL 778 fourth ed, Motor Operated Water Pumps, and power and
Submersible or non submersible Fountain Pump, grounded, cord connected. All pumps are
types as indicated below and power and types as indicated below
rated 120 V, 60 Hz
Aquamax 6000
3500 SF
2.6
3500
19
Aquamax
4.4
6000
15
Certified in accordance with: UL 778 fourth ed, Motor Operated Water Pumps, and power and
types as indicated below and power and types as indicated below
Aquamax 6000
Model

4.4
Current (A)

6000
Q max. (Gph)

15
Max. Height (feet)

UWP
Model150
Neptun 1600

2.4
Current (A)
0.8

2400
Q max. (Gph)
1600

28
Max. Height (feet)
15 ft, 6 in.

UWP
150
Profinaut
6000
Neptun
1600

2.4
6.1
0.8

2400
6100
1600

28
40
15 ft, 6 in.

Profinaut
6000
Profimax
7000
Neptun 2600

66.1
2.0

6100
7000
2600

40
28
20 ft

Neptun 2600

2.0

2600

20 ft

Submersible
Filter Pump Model
Profimax 7000
6 SwimSkim 25, Household,
7000 grounded, cord
28connected. The
Nautilus
1600120 V, 60 Hz, 0,9
0.8A.
1600
15
pump
is rated
Note: additional a 40 W rating can be added
Submersible
Filter Pump Model
grounded, cord
Nautilus 1600
0.8SwimSkim 25, Household,
1600
15connected. The
Nautilus
2600120 V, 60 Hz, 0,9
1.9A.
2600
21
pump
is rated
Note: additional a 40 W rating can be added
Nautilus 2600
1.9

2600

Submersible or non submersible Fountain Pump, grounded, cord connected. All pumps are rated
120 V, 60 Hz
Submersible or non submersible Fountain Pump, grounded, cord connected. All pumps are rated
and power and types as indicated below
120 V, 60 Hz
and power and types as indicated below
CAUTION: WHEN SERVICING YOUR WATER FEATURE MAKE SURE THAT YOU DISCONNECT ALL ELECTRICAL AND LIGHTING.
Midwest Tropical Inc • 3420 West Touhy Ave • Skokie, IL 60076 USA • Phone: (847)679-6666 • Fax: (847)679-6669

Enclosed Waterfall

Listing Constructional Data Report (CDR)

Safety Certifications
1.0 Reference and Address

Report Number 100816416DAL-001

Original Issued: 29-Aug-2012

Revised: 4-Sep-2012

39” LED lighting fixture
UL Standard for Safety for Luminaires, ANSI/UL 1598 and CAN/CSA C22.2#250.0, Third
Standard(s)
Model #
HE-YLL-032-0.5M-ETL
Edition, Issued: Sep 17, 2008, Revised: Jan 11, 2010
Guangzhou Huayao Electronics Co.
Ltd.
Listing Constructional Data Report
(CDR)
4016 Harry Hines Blvd
No. 70, Yuangang Road, Tianhe
Address
Address
Dallas, TX 75219
District, Guangzhou 510650, China
USA
China
Country
Country
Mr.Address
Mark Reed-Walkup
James Zhong
Contact
Contact
1.0 Reference
and
650-1855
86-020-37089936
Phone
Phone
100816416DAL-001
Report
Number (972)
Original Issued: 29-Aug-2012
Revised: 4-Sep-2012
(972)
767-3299
86-020-37093748
FAX
FAX
UL Standard for Safety for Luminaires, ANSI/UL 1598 and
CAN/CSA C22.2#250.0, Third
Standard(s)
mark@wdmlighting.com
Email
Email
Edition, Issued: Sep 17, 2008, Revised: Jan 11,
2010 james@highendled.com
Applicant

Wiedamark LLC

Manufacturer

Applicant

Wiedamark LLC

Manufacturer

Address
Country
Contact
Phone
FAX
Email

4016 Harry Hines Blvd
Dallas, TX 75219
USA
Mr. Mark Reed-Walkup
(972) 650-1855
(972) 767-3299
mark@wdmlighting.com

Address
Country
Contact
Phone
FAX
Email

Guangzhou Huayao Electronics Co.
Ltd.
No. 70, Yuangang Road, Tianhe
District, Guangzhou 510650, China
China
James Zhong
86-020-37089936
86-020-37093748
james@highendled.com

Page 1 of 18

Enclosed Waterfall

Safety Certifications
Pondmaster® UV Sterilizer
Model # UPC 02940

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c014 79.156797, 2014/08/20-09:53:02
Create Date                     : 2018:06:27 14:46:33-07:00
Metadata Date                   : 2018:06:27 14:46:39-07:00
Modify Date                     : 2018:06:27 14:46:39-07:00
Creator Tool                    : Adobe InDesign CC 2014 (Macintosh)
Instance ID                     : uuid:09babbd5-6207-f142-808e-f7bc5aa30b85
Original Document ID            : xmp.did:519c2dcc-48e4-5845-9ee6-35039e00e444
Document ID                     : xmp.id:e54a0ed3-b116-4245-adf6-4421e6e589a3
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:55d241e3-50d4-4c88-a1e9-43029959763d
Derived From Document ID        : xmp.did:4eabf954-765d-4b66-b805-00d89ccfe945
Derived From Original Document ID: xmp.did:519c2dcc-48e4-5845-9ee6-35039e00e444
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2014 (Macintosh)
History Changed                 : /
History When                    : 2018:06:27 14:46:33-07:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 11.0
Trapped                         : False
Page Count                      : 23
Creator                         : Adobe InDesign CC 2014 (Macintosh)

EXIF Metadata provided by EXIF.tools

Poly Habitat Soundscaping Enclosed Waterfall Installation Guide USCAN 2017Early 2018

Navigation menu

Versions of this User Manual:

Views

Navigation