Poly 213371 03_zone_controller_QSG Habitat Soundscaping Zone Controller QSG

User Manual: Poly Habitat Soundscaping Support | Poly, formerly Plantronics & Polycom

Open the PDF directly: View PDF PDF.
Page Count: 2

DownloadPoly 213371-03_zone_controller_QSG Habitat Soundscaping Zone Controller QSG
Open PDF In BrowserView PDF
Zone Controller
213370-03 10.18

1
CAT-6

Ethernet status
Solid
Link
Activity
Blinking

Zone controller LED status
Identification
Blinking
Solid
Booting
Insufficient power Solid
Power on
No LED

Ping Code
Zone A
Zone B

Flash x1
Flash x 2

Ping Code
Speaker A
Speaker B
Speaker C
Speaker D

Flash x1
Flash x2
Flash x3
Flash x4

2
+
16 AWG

+

+

GND

22 AWG

+

plantronics.com/habitat-support

Safety

Warranty/Guarantee

Regulatory

English Safety Instructions
• This unit should only be installed by professional installation
personnel.
• Only install this unit in a location that can structurally support
the weight of the unit and its mounting hardware.
• Do not mount the unit in a manner other than specified in the
instructions.
• All screws and hardware should be securely tightened, and
inspected to ensure there are no loose joints or attachment
points.
• Install in accordance with all local and national codes.
• IMPROPER INSTALLATION MAY CAUSE THE UNIT TO FALL,
RESULTING IN PERSONAL INJURY AND/OR PROPERTY
DAMAGE.

English
For warranty or guarantee terms and conditions and product
support, go to plantronics.com/habitat-support.

United States

Deutsche Sicherheitshinweise
• Dieses Gerät darf nur von geschulten Fachkräften installiert
werden.
• Installieren Sie das Gerät an einem Ort mit ausreichender
Tragfähigkeit für das Gewicht des Geräts und seine Montageteile.
• Montieren Sie das Gerät nur wie in der Anleitung vorgegeben.
• Sämtliche Schrauben und Teile müssen sicher festgezogen und
auf lockere Verbindungen oder Befestigungspunkte geprüft
werden.
• Die Installation muss unter Einhaltung aller lokalen und
nationalen Vorschriften erfolgen.
• EINE FEHLERHAFTE INSTALLATION KANN ZUM STURZ DES
GERÄTS FÜHREN UND VERLETZUNGEN ODER SACHSCHÄDEN
VERURSACHEN.

Deutsche
Garantiebedingungen und Produkthilfe finden Sie unter
plantronics.com/habitat-support.
Español
Para consultar los términos y condiciones de la garantía y
soporte de producto, vaya a plantronics.com/habitat-support.
Français
Pour consulter les conditions générales relatives à ces
garanties ou contacter le service d’assistance, rendez-vous sur
plantronics.com/habitat-support.
Italiano
Per la garanzia o per termini e condizioni della garanzia, nonché
per il supporto tecnico, visitare la pagin
plantronics.com/habitat-support.

FCC Regulatory Information

This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
Australia

Europe

Español Instrucciones de seguridad
• La instalación de esta unidad solo la debe realizar personal de
instalación profesional.
• Instala la unidad únicamente en ubicación que pueda soportar
estructuralmente el peso de la unidad y sus elementos de
montaje.
• No montes la unidad de una manera distinta a la especificada en
las instrucciones.
• Debes apretar firmemente todos los tornillos y elementos de
montaje, así como inspeccionarlos para asegurarte de que no
quedan juntas ni puntos de fijación sueltos.
• Realiza la instalación de acuerdo con todos los códigos locales y
nacionales.
• LA INSTALACIÓN INCORRECTA PODRÍA CAUSAR FALLOS EN
LA UNIDAD, QUE PODRÍAN RESULTAR EN LESIONES O DAÑOS
MATERIALES.
Français Instructions de sécurité
• Cette unité doit être installée par un personnel d’installation
qualifié.
• Installer cette unité dans un emplacement qui peut supporter le
poids de l’unité et de son support de montage.
• Respecter strictement les instructions pour le montage de cette
unité et ne pas dévier de ces instructions.
• Toutes les vis et tous les accessoires doivent être fermement
fixés et inspectés pour vérifier qu’aucune jointure ou aucun point
de fixation n’est desserré.
• L’installation doit être conforme à tous les codes nationaux et
locaux.
• UNE INSTALLATION DEFECTUEUSE POURRAIT ENTRAINER LA
CHUTE DE L’UNITE ET ENGENDRER DES BLESSURES GRAVES
ET/OU DES DOMMAGES MATERIELS.
Italiano Istruzioni per la sicurezza
• Questa unità deve essere installata esclusivamente da personale
professionale competente.
• Installarla solo in una posizione che strutturalmente è in grado
di sostenere il peso dell’unità e degli accessori necessari per il
fissaggio.
• Non montare l’unità in un modo diverso da quello specificato
nelle istruzioni.
• Tutte le viti e gli accessori per il fissaggio devono essere serrati
saldamente e controllati per verificare che non vi siano giunti o
punti di attacco lenti.
• Installare in conformità con tutte le normative locali e nazionali.
• L’INSTALLAZIONE SCORRETTA PUÒ CAUSARE LA CADUTA
DELL’UNITÀ CON CONSEGUENTI LESIONI PERSONALI E/O
DANNI ALLA PROPRIETÀ.

habitat.plantronics.com
Plantronics, Inc.
345 Encinal Street
Santa Cruz, CA 95060
United States

Plantronics B.V.
Scorpius 171
2132 LR Hoofddorp
Netherlands

© 2018 Plantronics, Inc. All trademarks are the property of their respective owners.
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Language                        : en-US
XMP Toolkit                     : Adobe XMP Core 5.6-c015 91.163280, 2018/06/22-11:31:03
Create Date                     : 2018:10:26 12:43:22-07:00
Metadata Date                   : 2018:11:12 14:54:44-08:00
Modify Date                     : 2018:11:12 14:54:44-08:00
Creator Tool                    : Adobe InDesign CC 2017 (Macintosh)
Instance ID                     : uuid:e2d53a82-6fca-4f35-b74c-6c3240e30461
Original Document ID            : xmp.did:ad804af5-e904-4ee3-a3c4-3ea0d5cb6f0a
Document ID                     : xmp.id:a886604a-4dcb-42f4-b62e-d1444e187cc8
Rendition Class                 : proof:pdf
Version ID                      : 1
Derived From Instance ID        : xmp.iid:538db4bc-cdd1-47a4-be81-a34f50e2ece4
Derived From Document ID        : xmp.did:6d27d666-d3d9-4b2d-a1ec-7124d93571b5
Derived From Original Document ID: xmp.did:ad804af5-e904-4ee3-a3c4-3ea0d5cb6f0a
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2017 (Macintosh)
History Changed                 : /
History When                    : 2018:10:26 12:43:22-07:00
Format                          : application/pdf
Title                           : 213371-03_zone_controller_QSG.indd
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
GTS PDFX Version                : PDF/X-4
Page Count                      : 2
Creator                         : Adobe InDesign CC 2017 (Macintosh)
EXIF Metadata provided by EXIF.tools

Navigation menu