Poly Savi 8210 8220 Uc Ug En

User Manual: Poly Savi 8200 Office - Setup & Support | Poly, formerly Plantronics & Polycom

Open the PDF directly: View PDF .
Page Count: 15

Download
Open PDF In Browser	View PDF

PLANTRONICS + POLYCOM. NOW TOGETHER AS

Savi 8210/8220 UC
Wireless Headset System
User Guide

Contents

DECT Information 3
DECT Enhanced Security

Overview 4
Headset Basics 4
DECT USB adapter 4
Charge stand 5
Fit and charge 6
Customize Your Headset 6
Charge your headset 6
Talk Time 6
Headset battery status 6
Connect to PC 7
Subscribe USB adapter again
Configure USB adapter 8

Load software 9
Plantronics Hub configurable settings
The basics 10
Headset Controls 10
Power on/off 10
Make, answer, end calls 10
Adjust volume 10
Mute 10
Interact with Microsoft softphone
Set up a conference call 11
More Features 12
Change voice prompt language
Optimize audio quality 12
Limit office noise 12
ANC 12
Set the range 12

Troubleshooting 13
Headset 13
Softphone 13
Support

DECT Information

DECT products should never be used outside the region in which they were originally purchased
and intended to be used.
The enclosed DECT 6.0 wireless product uses restricted wireless radio frequencies which vary by
country. DECT 6.0 devices are generally authorized for use in the US/Canada/Mexico. Use of this
DECT 6.0 product in unauthorized countries is a violation of law, may disrupt
telecommunications networks and devices, and can subject you to fines and penalties by
regulatory agencies.

DECT Enhanced Security

Plantronics is a member of the DECT Forum and has fully adopted their recommendations for
enhancements to security within all DECT products.
Plantronics DECT-based products now fully incorporate the latest recommendations on Enhanced
Security from the DECT Forum and ETSI. These improvements cover registration, authentication,
authorization and encryption procedures. Plantronics DECT products are now secure against all
the known vulnerabilities that were highlighted by the public announcements of the Chaos
Communication Congress in 2009.
Plantronics DECT products have been tested against and passed the DECT Forum security
certification requirements and consequently have been granted 'DECT Forum security' logo
certification.
Plantronics products using the new enhanced version of DECT that includes these security
improvements are marked on the base with the DECT Forum security logo.

Overview

Headset Basics

2
4

6
1 Volume wheel
2 Call button/Press to interact with

4 Headset LED
5 Power button

Microsoft Teams (app required)

3 Mute

6 ANC (Active Noise Canceling)

Be safe
Please read the safety guide for important safety, charging, battery and regulatory information
before using your new headset.

DECT USB adapter

NOTE USB connection may vary but function is the same
USB LEDs

Status

Solid red

Headset is powered off

Solid red

Headset is not subscribed (if headset is powered on)

Red and blue flashes
Solid blue
Triple blue flashes
Blue flashes

Subscribe mode
Subscription successful; connected
Incoming call
On a call or streaming media

Solid red

Call is muted

Red flashes

Call on hold

Red flashes

Update in progress

Charge stand

Fit and charge

Customize Your Headset

Optimize the comfort and fit of your headset.
1

Adjust the Headband
To adjust the headband, lengthen or shorten the band until it fits comfortably. Position the
earcups so that the foam cushions sit comfortably over the center of your ears.

Position the stabilizer T-bar above your ear, if applicable.

Adjust the Boom
For optimum audio, bend the boom so it is approximately two finger widths from the corner of
your mouth.

NOTE For true stereo listening when wearing the boom on the left, adjust the setting in Plantronics

Hub (plantronics.com/software) by going to Settings > Ringtones and Volumes > Wearing preference
for volume control.

Charge your headset

Talk Time
Headset battery status

Place the headset in the charge cradle. The headset charging LED flashes when charging the
headset and turns off when the headset is fully charged. Charge for at least 20 minutes prior to
the first use. A full charge takes 3 hours.
With a single full charge, the headset provides up to 13 hours of continual talk time in wideband
mode.
Determine your headset battery status:
• Listen to the voice prompts after powering on the headset
• Hover over the Plantronics Hub system tray icon
• View in Plantronics Hub app

Connect to PC

Your DECT™ USB adapter comes pre-subscribed to your headset.
1

Turn on your headset and insert the DECT USB adapter into your laptop or PC.

The USB adapter LED is solid red when inserted and then turns solid blue to indicate the headset is
connected to the USB adapter. If you are wearing your headset you will hear “Base connected” to
indicate the connection has been established. When on a call, the LED on the USB adapter flashes
blue. When not on a call the LED is solid blue.
OPTIONAL Load Plantronics Hub for Windows and Mac by visiting poly.com/software. This will
allow you to customize your headset behavior through advanced settings and options.

Subscribe USB adapter
again

Typically, your DECT USB adapter is subscribed (connected) to your headset. In the event that your
adapter is disconnected or bought separately, you will need to subscribe the adapter to your headset.
1
2
3

Insert the DECT USB adapter into your laptop or computer and wait for the LED to light up.
Put your headset in subscribe mode by holding Volume up for 4 seconds. Your headset LED lights
up.
Put your DECT USB adapter into subscribe mode by double pressing the recessed subscription
button with a pen or paperclip until the USB adapter flashes red and blue.

NOTE USB connection may vary but function is the same
4

Subscription is successful when you hear "pairing successful" and "base connected" and the DECT
USB adapter LED is solid blue.
NOTE If the USB adapter LED goes solid red after flashing red and blue, the subscription attempt has
failed and should be repeated.
End Subscription
If the USB adapter is in subscription mode and you want to stop the adapter from searching for a
headset, press the recessed subscription button once with a pen or paperclip. The subscription
light will be solid red for four seconds and then go to its previous state.
Disabling over-the-air subscription
The Savi system ships with the over-the-air headset subscription enabled. In a multi-shift
environment, you may want to disable this mode of subscription.
Adjust the over-the-air subscription setting in Plantronics Hub Settings > Wireless.
7

Configure USB adapter

Your DECT USB adapter comes ready to take calls. If you want to listen to music, you will need to
conﬁgure your DECT USB adapter.
Windows
1

To conﬁgure your DECT USB adapter to play music, go to Start menu > Control Panel > Sound >
Playback tab. Select your headset and set it as the Default Device and click OK.

To pause music when you place or receive calls, go to Start menu > Control Panel > Sound >
Communications tab and select the desired parameter.
Mac

To conﬁgure the DECT USB adapter, go to Apple menu > System Preferences > Sound. On both
the Input and Output tabs, select your headset.

Load software

Plantronics Hub for Windows/Mac is an invaluable headset tool.
1
2

Download Plantronics Hub for Windows/Mac by visiting poly.com/software.
Using Plantronics Hub, manage your headset settings.
• Call control for softphones
• Change headset language
• Update firmware
• Turn features on/off

Plantronics Hub
configurable settings

Feature

Plantronics Hub tab

Answering Call Alert
Audio channel tone

General

Audio sensing
Close conversation limiting
Online indicator
Second incoming call
Mute on/off alerts
Mute reminder
Headset to PC radio link
Plantronics product improvement program
Software log level
Change language of voice prompts
Brazilian Portugese, Cantonese, Danish, English (UK, US), French, German, Indonesian,
Italian, Japanese, Korean, Mandarin, Norwegian, Russian, Spanish, Swedish and Thai.

Language

PC ringtone

Ringtone and Volume

Volume level tones
Wearing preference for volume control (stereo audio)
Ring location
Dial tone
Target softphone

Softphones

Media player action on incoming call
Softphones and media players (PLT enabled)
Software settings (Aware for Microsoft)

Sensors and Presence

Audio quality
Over-the-air subscription

Wireless

Range
Anti-startle
Noise exposure

Advanced

Hours on phone per day

The basics

Headset Controls

2
4

1Volume wheel Toggle repeatedly forward or backward to adjust volume
2Call / Teams button Press to place, answer, end a call or to interact with Microsoft Teams (app
required)

3Mute button During a call, press to mute and unmute
4Headset LED Flashes when in use
5Power button Toggle on and off
6ANC (Active Noise Canceling) Toggle on and off

Power on/off

To turn on the headset, slide the Power button to reveal green.

Make, answer, end calls

Make a call
Dial from your softphone.
Answer or end a call
Tap the Call button.
1
2

Adjust volume

Answer a second call
While on a call, press the headset Call button for 2 seconds to answer the second call.
This will place the first call on hold.
To switch between the calls, press the headset Call button for 2 seconds.
Fine-tune your headset volume by adjusting the volume controls.
Adjust headset microphone volume (softphone)
Place a test softphone call and adjust softphone volume and PC sound volume accordingly.

Mute
Interact with Microsoft
softphone

During a call, tap the headset mute button. Tap again to unmute. When mute is on, the LED is
solid red. Modify your mute settings in Plantronics Hub for Windows/Mac.
•
•
•

For Microsoft Teams, tap the headset's Call button to interact (application required).
For Skype for Business, press and hold the headset's Call button for 2 seconds to interact
(application required).
Set your target phone by going to Plantronics Hub for Windows/Mac > Softphones > Software
Settings > Target Softphone
10

Set up a conference call

You can set up a conference call with 3 additional headsets.
Join Savi headsets manually
1

While on a call, press the USB adapter's recessed subscription button with a pen or paper clip.
The adapter subscription LED flashes red and blue.

Hold the guest headset's Volume up until the headset LED turns on.

The primary user will hear a request "Conference requested." To accept the request, press the
primary user's headset Call button. Both users hear "Conference accepted." View conference call
status by going to Plantronics Hub About > Connections > Conferenced headsets.

Guest headsets can remain as guests through multiple calls. To remove a guest headset, either
press the guest headset's Call button or dock the primary user's headset in the charge cradle.

Exit a conference call

More Features

Change voice prompt
language

Optimize audio quality

To change the voice prompt language on your headset, open Plantronics Hub and go to Settings >
Language
You can choose from: Cantonese, Danish, English (UK, US), French, German, Indonesian, Italian,
Japanese, Korean, Mandarin, Norwegian, Russian, Spanish, Swedish and Thai.
There are 3 audio modes: wideband stereo (hybrid), wideband (conversation) and multimedia
(music).
To optimize your audio quality for your activity, with the system idle, press the headset Mute
button for 4 seconds. The headset cycles through the modes with each 4 second press. Also
configurable in Plantronics Hub.

Limit office noise

You can limit the amount of nearby conversation that is transmitted during your calls.
Open Plantronics Hub. Go to Settings > General > Close Conversation Limiting. Changes take
effect with the next call. The default is Standard mode which is optimized for most environments.

ANC

Active Noise Canceling (ANC) reduces external noise and enhances your music and sound quality.
Your headset ships with ANC on. To turn ANC off, slide the switch away from "ANC."

Set the range

Changing the range can help with PC audio quality, improve user density or restrict range of
users.
You can adjust the range setting in Plantronics Hub Settings > Wireless > Range.
Setting

Range

High (Default)

up to 300 ft.

Medium

up to 150 ft.

Low

up to 50 ft.

Troubleshooting

Headset

My headset is unstable.

When you wear the headset, the microphone should rest as close
to your cheek as possible without touching. The microphone can
be adjusted inward by the pivoting earpiece to optimize the
position of the headset. See Position Your Headset.

Talk time performance is
significantly degraded even after a
full recharge.

Battery is wearing out. Contact us at poly.com/support.

When should I replace my
rechargeable battery?

Replace your rechargeable battery after 3 years or 300 charge
cycles, whichever occurs first.

I can’t hear anything in the headset.

Softphone

When I dial from my softphone
application, nothing happens.

Ensure your headset is powered on.
Press the headset Call button.
Make sure your headset is charged.
Fine tune the listening volume.
Ensure that your headset is the default sound device by going to
your Sound Control Panel (Windows) or your Sound System
Preferences (Mac).
Make sure your headset is subscribed to the USB adapter. See
Subscribe USB adapter again.
Ensure that the Plantronics Hub software is installed. To download,
visit plantronics.com/software.
Ensure that you are using a compatible softphone application. For
a list of compatible softphones, visit plantronics.com/software.
If the Plantronics software is not installed and you do not have a
compatible softphone, you must first press the headset Call button
and then use the softphone interface to place/answer/end calls.
Restart your computer.

How do I interact with Microsoft
Teams or Skype for Business?

• For Microsoft Teams, tap the Call
required).

button to interact (Teams app

• For Skype for Business, press and hold the Call button for 2
seconds to interact (Skype for Business app required).
• Set your target phone by going to Plantronics Hub for
Windows/Mac > Softphones > Software Settings > Target
Softphone

Does my Microsoft Teams-enabled
headset work with other
softphones?

Yes, while your headset is optimized for Microsoft Teams, it can be
configured to use with other supported softphones. Set your target
phone by going to Plantronics Hub for Windows/Mac > Softphones
> Software Settings > Target Softphone
When you configure another softphone, the Call button:
• doesn't interact with Teams
• doesn't go to Teams notifications
• will not launch Cortana

Speaking and/or listening volume is
too low or too high.

Adjust headset listening volume.
Adjust listening/speaking volumes in the computer’s sound control
panel/system preferences.
Adjust listening/speaking volumes in the softphone application.

The sound is distorted or I hear an
echo in the headset.

Reduce speaking and/or listening volume on the computer using
your softphone application.
Point microphone towards your chin.
If the distortion is still present, lower the volume on the headset.

I can no longer hear any audio
through my PC Speakers.

Change the default sound device by going to your Sound Control
Panel (Windows) or your Sound System Preferences (Mac) and
selecting your PC speakers or internal speakers.

No audio connection to PC.

Unplug USB adapter and then reconnect it.
Quit and then re-start your PC or softphone application.

Support

NEED MORE HELP?
poly.com/support
Plantronics, Inc.

Plantronics B.V.

345 Encinal Street

Scorpius 171

Santa Cruz, CA 95060

2132 LR Hoofddorp

United States

Netherlands

© 2021 Plantronics, Inc. All rights reserved. Poly, the propeller design, and the Poly logo are trademarks of Plantronics, Inc. Bluetooth is a registered
trademark of Bluetooth SIG, Inc. and any use by Plantronics, Inc. is under license. All other trademarks are the property of their respective owners.
Manufactured by Plantronics, Inc.

216828-06 02.21

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2021:02:12 22:20:10+00:00
Modify Date                     : 2021:02:12 22:20:10+00:00
Creator                         : AH XSL Formatter V6.6 MR7 for Windows (x64) : 6.6.9.39847 (2019-07-29T09:58+09)
Producer                        : Antenna House PDF Output Library 6.6.1477 (Windows (x64))
Trapped                         : False
Page Count                      : 15
Page Mode                       : UseOutlines
Language                        : en

EXIF Metadata provided by EXIF.tools

Poly Savi 8210 8220 Uc Ug En

Navigation menu

Versions of this User Manual:

Views

Navigation