Poly Voyager 8200 Uc Ug En

User Manual: Poly Voyager 8200 UC - Setup & Support | Poly, formerly Plantronics & Polycom

Open the PDF directly: View PDF .
Page Count: 16

Download
Open PDF In Browser	View PDF

Voyager 8200 UC
Bluetooth stereo headset
User Guide

Contents

Headset overview
Be safe 3

USB Bluetooth adapter

Connect and pair 5
Connect to PC 5
Conﬁgure USB adapter 5
Pair to mobile device 5
Pair mode 6
Pair USB adapter again 6
NFC pairing 7
Fit

Load software 9
Update your Poly device

The Basics 10
Power on/off 10
Volume 10
Make/Take/End Calls 10
Interact with Microsoft softphone
Play/pause music 11
Track selection 11
Voice control 11
Charge 11

More Features 13
Use sensors 13
ANC 13
OpenMic 13
Troubleshooting
Support

Headset overview

Siri
Google Assistant ™
:02

ANC

2
1

OpenMic

Volume dial
Siri, Google
Assistant

Default voice assistant (smartphone feature)

Play previous track*
Play/pause*
Skip to next track*
ANC

Active Noise Cancelling

OpenMic

Hear surroundings
Mute
Headphone LEDs

Call button/Press to interact with Microsoft Teams (app required)
Power
Bluetooth® pairing

NOTE *Functionality varies by application. May not function with web-based apps.

Be safe

Please read the safety guide for important safety, charging, battery and regulatory
information before using your new headset.

USB Bluetooth adapter

Your high-ﬁdelity Bluetooth USB adapter comes pre-paired to your Poly device. Plug it
into your computer to connect to high-ﬁdelity computer audio.

NOTE Adapter's USB connection and design may vary, but function is the same.

Standard LEDs
USB LEDs

What they mean

Flashing red and blue

Pairing

Solid blue

Headset connected

Flashing blue

On a call

Solid red

Mute active

Flashing purple

Streaming media from computer

LEDs when Microsoft Teams* is detected
USB LEDs

What they mean

Flashing red and blue

Pairing

Solid purple

Microsoft Teams connected

Flashing blue

On a call

Solid red

Mute active

Pulsing purple

Microsoft Teams notiﬁcation

NOTE *Requires Microsoft Teams desktop application.

Connect and pair

Your Bluetooth USB adapter comes pre-paired to your headset.

Connect to PC
1

Turn on your headset and insert the Bluetooth USB adapter into your laptop or PC.

The USB adapter LED ﬂashes and then turns solid to indicate the headset is connected to
the USB adapter. If you are wearing your headset you hear “PC connected” to indicate the
connection has been established. When on a call, the LED on the USB adapter flashes blue.
When not on a call the LED is solid.

Load Poly Lens Desktop App by visiting poly.com/lens. This allows you to customize your
headset behavior through advanced settings and options.
Your high-fidelity Bluetooth USB adapter comes ready to take calls. If you want to listen to
music, you will need to conﬁgure your Bluetooth USB adapter.

Configure USB adapter

Windows
1

To conﬁgure your Bluetooth USB adapter to play music, go to Start menu > Control Panel
> Sound > Playback tab. Select Poly BT700 or Plantronics BT600, set it as the Default
Device and click OK.

To pause music when you place or receive calls, go to Start menu > Control Panel > Sound
> Communications tab and select the desired parameter.
Mac

Pair to mobile device

To conﬁgure the Bluetooth USB adapter, go to Apple menu > System Preferences > Sound.
On both the Input and Output tabs, select Poly BT700 or Plantronics BT600.

To put your headset in pair mode, slide and hold the Power switch away from the off
position until you hear "pairing" and the headset LEDs flash red and blue.

Activate Bluetooth on your phone and set it to search for new devices.
• iPhone Settings > Bluetooth > On*
• Android Settings > Bluetooth: On > Scan for devices*

NOTE *Menus may vary by device.
5

Select “Poly V8200 Series.”
Once successfully paired, you hear “pairing successful” and the headset LEDs stop flashing.
NOTE Your headset can pair with up to 8 devices but only maintain 2 connections
simultaneously; this includes the Bluetooth USB adapter.
Slide and hold the power button towards the Bluetooth icon until the LEDs flash red and
blue.

Pair mode

Typically, your USB adapter is pre-paired to your Poly audio device. In the event that your
adapter is disconnected or bought separately, you will need to pair the adapter to your Poly
device. The adapter pairing method depends on which USB adapter you use.

Pair USB adapter
again

Pair BT700 USB adapter again
Your USB adapter requires Poly Lens Desktop App to pair to a Poly audio device.
Download: poly.com/lens.

BT700 USB-C
1

BT700 USB-A

Insert the high-fidelity Bluetooth USB adapter into your laptop or computer and wait for
your computer to recognize it.

Put your Poly audio device in pair mode.

Launch Poly Lens Desktop App and navigate to Poly BT700.

Put your Bluetooth USB adapter into pair mode by selecting "Pair new device" on the
adapter's main page or overflow menu. Your adapter flashes red and blue.
Pairing is successful when you hear "pairing successful" and "PC connected" and the
Bluetooth USB adapter LED is solid.
NOTE To pair again using Plantronics Hub Desktop App, navigate to the app's Poly BT700
general settings and select "Pair."
Pair BT600 USB adapter again

BT600 USB-C
1

BT600 USB-A

Insert the high-fidelity Bluetooth USB adapter into your laptop or computer and wait for
your computer to recognize it.

Put your Poly audio device in pair mode.

Put your Bluetooth USB adapter into pair mode by pressing and holding the recessed pair
button with a pen or paperclip until the Bluetooth USB adapter flashes red and blue.

NOTE Adapter design varies by USB connection.
Pairing is successful when you hear "pairing successful" and "PC connected" and the
Bluetooth USB adapter LED is solid.

NFC pairing

Ensure NFC is on and your phone’s display is unlocked.

Tap and hold the headphones to the phone’s NFC tag location until NFC pairing completes.
If necessary, accept the connection.
TIP Keep an eye on your Smartphone's screen for prompts to start and accept the pairing
process.
L

NOTE The headphone’s NFC tag is located on the outside of the left ear cup. Phone NFC tag
locations vary.

Fit

IMPORTANT Headset microphones are on the front of your earcups.
For best call audio, ensure that left and right earcups are on the correct ear.

Load software

Customize your device behavior through advanced settings and options with Poly Lens
App. Some softphones require the installation of Poly software to enable device call
control (answer/end and mute) functionality. Download: poly.com/lens.

NOTE Device settings and updates are also available in Plantronics Hub App.

Update your Poly
device

Keep your firmware and software up-to-date to improve performance and add new
features to your Poly device.
Update your device using your computer with Poly Lens Desktop App. Download at
poly.com/lens.
While updating:
• Do not use your Poly device until the update is complete.
• Do not start a second update from a second device.
• Do not stream media.
• Do not answer or place a call.

The Basics

Siri
Google Assistant ™
:02

ANC

Power on/off
Volume

2
1

Slide the switch

OpenMic

to power on or off.

Rotate the volume wheel

forward (+) or backward (–) to control the volume.

Adjust headset microphone volume (softphone)
Place a test softphone call and adjust softphone volume and PC sound volume accordingly.

Make/Take/End Calls

Answer a call
Choose:
• Tap the Call button
• Put on the headset to answer call

IMPORTANT For best call audio, ensure that left and right earcups are on the correct ear.
Answer a second call
First, tap the Call button to end current call, then tap the Call button again to answer
new call.
End a call
Tap the Call button to end current call.
Mute/unmute
While on an active call, choose:
10

• Tap the red Mute button
• Take off/put on your headset while on an active call (requires active smart sensors)
Hold a call
Double-tap the Call button to put a call on hold. Tap the Call button again to answer an
incoming call.
NOTE Up to 2 calls can be put on hold.
Switch between calls (flash)
Double-tap the Call button to switch between calls.
NOTE Flash functionality works only between calls of the same type. Flash does not work
between mobile and softphone calls.
Call back last call
Double-tap the Call button .
Answer calls from a second device
It's easy to answer calls from two devices (including softphone).
When on a call, you hear a ringtone notification of the incoming call from the second
paired device.
To answer a second call from the other device, first tap the Call button to end the current
call and tap the Call button again to answer the new call. If you choose to not answer the
second call, it will go to voicemail.

Interact with Microsoft
softphone

Play/pause music

• For Microsoft Teams, tap the headset's Call button to interact (application required).
• For Skype for Business, press and hold the headset's Call button for 2 seconds to interact
(application required).
• Set your target phone by going to Poly Lens Desktop App > Softphones > Software
Settings > Target Softphone
Tap the Play/pause

button.

NOTE Because your headset is equipped with sensors, if you are playing music and you take off
your headset, your music pauses. If you put on your headset, your music resumes (functionality
varies by application and doesn't function with web-based apps).

Track selection
Voice control
Charge

Tap the Forward button

or Back button

to control the track selection.

Siri, Google Assistant™, Cortana Press and hold the Play/pause button for 2 seconds
until you hear the tone to activate your smartphone's default voice assistant.
It takes up to 3 hours to fully charge your headphones. The LEDs turn off once charging is
complete.
=
=
=
=
=

TIP To check the headphones battery status, tap the Call button while wearing your
headphones. Headphones must be in idle state.

Your headphones have up to 24 hours of listening time.

More Features

Use sensors

Smart sensors respond when you put on or take off your headphones. Customize in
Plantronics Hub. Below describes default settings.
With active sensors

putting on the headphones
will:

taking off the headphones
will:

Mobile/softphone call

answer the incoming call

mute the active call

Music/media

resume music/media (if
playing previous to taking off)*

pause music/media (if
playing)*

NOTE *Functionality varies by application. May not function with web-based apps.
Reset Sensors
You may need to reset the sensors if they are not working as expected.
To reset the headset sensors, connect it directly to your computer's USB port, and place it,
with the ear cups up, on a flat, non-metallic surface for more than 10 seconds.

ANC

Active Noise Cancelling (ANC) reduces external noise and enhances your music and sound
quality.
Slide the ANC switch to choose:
• Mid: recommended for office
• High: recommended for airplane

OpenMic

When not on a call, tap the red button to hear your surroundings (your music/audio will
pause).

Troubleshooting

During a call, my voice sounds mufﬂed or
far away to other callers.

You may be wearing your headset backwards.
Headset microphones are on the front of your
earcups. For best call audio, ensure that left and right
earcups are on the correct ear.

When I use my headset with a softphone, Check the following:
the headset call control and mute
• If required to enable headset control (answer/end
buttons don't work.
and mute) functionality, ensure you have Poly Lens
Desktop App or Plantronics Hub for Windows/Mac
installed. See Load software.
• Mac only: if you are running Skype for Business
softphone, quit Plantronics Hub for optimum headset
call control.
How do I interact with Microsoft Teams
or Skype for Business?

• For Microsoft Teams, tap the Call button to
interact.
• For Skype for Business, press and hold the Call
button for 2 seconds to interact.
• Set your target phone by going to Poly Lens Desktop
App > Softphones > Software Settings > Target
Softphone

Does my Microsoft Teams-enabled
headset work with other softphones?

Yes, while your headset is optimized for Microsoft
Teams, it can be conﬁgured to use with other
supported softphones. Set your target phone by
going to Poly Lens Desktop App > Softphones >
Software Settings > Target Softphone
When you conﬁgure another softphone, the Call
button:
• doesn't interact with Teams
• doesn't go to Teams notiﬁcations
• will not launch Cortana

The headset sound is not working as
expected when connected to computer.
• During a call, nobody can hear me

To conﬁgure the headset sound on your computer,
see Conﬁgure for media.

• During a call, I can't hear anybody
• Music is not coming through my headset
• When I play music and a call comes in, the
music is too loud or doesn't pause
I can't unmute my headset when I'm on a
softphone call.
The headset sensors are not working as
expected.
• A call is not automatically answered
when I put on my headset

Install Poly Lens Desktop App.

If your headset sensors are not working as expected,
you may need to reset the sensors. See Reset sensors.

• Mute/unmute is not working when I take
on/off my headset during a call
14

• During a call, mute unexpectedly turns on
During a call, I get interference and drops
in sound.

Your headset is conﬁgured for optimal performance
during conference calls. Stereo telephony is on by
default. To increase Bluetooth density, change the
setting by going to Poly Lens Desktop App>Settings >
Wireless > Extended Range Mode.

The headset talk time is not accurate.

Charge the headset fully to reset the accuracy of the
talk time prompts.

I hear an echo when not on a call.

Check and see if OpenMic is on by pressing the red
mute button when you are not on a call. Our exclusive
OpenMic feature lets you control the level of
ambient noise you hear.

On my Mac, I can't change headset
settings with Plantronics Hub

Skype for Business and Lync users only:

1 Quit Skype for Business or Lync softphone.
2 Open Plantronics Hub for Mac and conﬁgure desired
settings.

3 Quit Plantronics Hub.
On my Mac, I can't update headset
ﬁrmware with Plantronics Hub

Skype for Business and Lync users only:

1 Quit Skype for Business or Lync softphone.
2 Open Plantronics Hub for Mac and update headset
ﬁrmware. See Update ﬁrmware.

3 Quit Plantronics Hub.
On my Mac, if I'm listening to streaming
audio and take off the headset, iTunes
starts playing when I put the headset
back on.

This is a known issue. Turn off play/pause setting in
the sensors tab of Poly Lens App or Plantronics Hub
for Windows/Mac.

Support

NEED MORE HELP?
poly.com/support
Plantronics, Inc.

Plantronics B.V.

345 Encinal Street

Scorpius 171

Santa Cruz, CA 95060 2132 LR Hoofddorp
United States

Netherlands

registered trademark of Bluetooth SIG, Inc. and any use by Plantronics, Inc. is under license. All other trademarks are the property of their
respective owners. Manufactured by Plantronics, Inc.
210802-06 07.21

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2021:07:22 20:32:08+00:00
Modify Date                     : 2021:07:22 20:32:08+00:00
Creator                         : AH XSL Formatter V6.6 MR7 for Windows (x64) : 6.6.9.39847 (2019-07-29T09:58+09)
Producer                        : Antenna House PDF Output Library 6.6.1477 (Windows (x64))
Trapped                         : False
Page Count                      : 16
Page Mode                       : UseOutlines
Language                        : en

EXIF Metadata provided by EXIF.tools

Poly Voyager 8200 Uc Ug En

Navigation menu

Versions of this User Manual:

Views

Navigation