Polycom Soundpoint Pro Se 225 Users Manual SE225 User Guide

Pro SE-225 to the manual 925b9e2d-4b75-4c9c-992a-bd319ad15ebd

2015-02-02

: Polycom Polycom-Soundpoint-Pro-Se-225-Users-Manual-442394 polycom-soundpoint-pro-se-225-users-manual-442394 polycom pdf

Open the PDF directly: View PDF .
Page Count: 28

SoundPoint ®Pro

Model SE-225

Installation Instructions

and User’s Guide

Polycom®, SoundPoint®Pro, and the Polycom logo design are registered trademarks of Polycom, Inc. in the U.S.

Don't forget to mail in yourOwnerRegistration Card!

Polycom, Inc., 1565 Barber Lane, Milpitas, CA95035

Telephone 408.526.9000 or toll-free 1.800.POLYCOM

Facsimile 408.526.9100 Internet www.polycom.com

SoundPoint Pro Professional Conference Phone User’s Guide

i i i

SoundPoint Pro Professional Conference Phone User’s Guide

i i

IMPORTANT SAFETY

INSTRUCTIONS

When using your telephone equipment, the following safety precautions should always be followed

to reduce the risk of fire, electric shock, and injury to persons.

1. Read and understand all instructions.

2. Follow all warnings and instructions marked on the instrument.

3. SoundPoint®Pro will not operate during a period of power loss. For placing emergency calls

during periods of power loss, be sure to have at least one telephone that operates with

telephone line-level power in your home or office.

4. Unplug SoundPoint Pro from the wall outlet before cleaning. Do not use liquid or aerosol

cleaners. Use only a damp cloth for cleaning.

5. This instrument can be hazardous if immersed in water. To avoid the possibility of electrical

shock, do not use the telephone while you are in the bathtub or shower, or when you are wet.

If you accidentally drop the telephone into water, do not retrieve it until you have first

unplugged the line cord from the modular wall jack. Do not reconnect the telephone until it

has dried thoroughly.

6. Avoid using the telephone during electrical storms in your immediate area. There is a remote

risk of electric shock from lightning. Urgent calls should be brief. Even though protective

measures may have been installed to limit electrical surges from entering your home or

business, absolute protection from lightning is impossible.

7. If you suspect a natural gas leak, report it immediately, but use a telephone away from the area

in question. The telephone’s electrical contacts could generate a tiny spark. While unlikely, it

is possible that this spark could ignite heavy concentrations of gas.

8. Never push objects of any kind into the telephone through housing slots as they may touch

hazardous voltage points or short out parts that could result in a risk of electric shock. Never

spill liquid of any kind on the telephone. If liquid is spilled, however, refer servicing to proper

service personnel.

9. To reduce the risk of electric shock, do not disassemble this telephone. Opening or removing

covers may expose you to hazardous voltages. Incorrect reassembly can cause electric shock

when the telephone is subsequently used. If your telephone does not work properly, refer to

the section describing how to get service for your telephone.

10. Always use caution when installing or modifying telephone lines. Never install telephone

wiring during a lightning storm. Never install telephone jacks in wet locations unless the jack

is specifically designed for wet locations.

11. Never touch uninsulated telephone wires or terminals unless the telephone line has been

disconnected from the network interface.

12. Do not place on an unstable surface (e.g., cart stand, or table); a fall may damage the unit.

13. Unplug and refer to an authorized service representative under the following conditions:

▼When the power cord or plug is damaged or frayed.

▼If the unit has been dropped or damaged.

▼If the unit exhibits a distinct change in performance.

14. Operate using only the power source indicated on the console label.

15. Do not allow anything to rest on the power cord. Do not place the unit where the cord might

be abused by pets, children, or foot traffic.

16. Do not overload wall outlets or extension cords.

SAVE THESE INSTRUCTIONS

SoundPoint Pro Professional Conference Phone User’s Guide

i v

SoundPoint Pro Professional Conference Phone User’s Guide

TABLE OF CONTENTS

SAFETYINSTRUCTIONS...............................................................ii

Chapter 1 INTRODUCTION AND INSTALLATION ........................1–1

INTRODUCTION..........................................................................1–2

UNPACKING ................................................................................1–3

INSTALLATION...........................................................................1–3

Preparing for Installation .........................................................1–3

Line Interface Module (LIM)...................................................1–4

Installing the Phone..................................................................1–4

GETTING CONNECTED ............................................................1–5

Phone, Power, and Data Connections ......................................1–5

Handset Connection ................................................................1–5

Headset Connection..................................................................1–5

KEYS AND OPERATIONALFEATURES...................................1–7

VISUALINDICATORS.................................................................1–8

Chapter 2 SOUNDPOINT®PRO OPERATION ...............................2–1

MAKING CALLS, ANSWERING CALLS, HANGING UP.......2–2

Tips for Using the Line Keys...................................................2–2

Changing Modes.......................................................................2–2

More on Making Calls..............................................................2–2

Selecting a Line.................................................................2–2

Using Redial and Repetitive Redial...................................2–3

More on Answering Calls.........................................................2–3

When More Than One Incoming Line is Ringing.............2–3

Second Calls on an Inactive Line .....................................2–3

SPEAKER MODE.........................................................................2–4

Individual Mode.......................................................................2–4

Group Mode ............................................................................2–4

HEADSET MODE.........................................................................2–5

CONFERENCE MODE ................................................................2–5

Using Lines...............................................................................2–5

Operation .................................................................................2–6

Establishing a Conference Call..........................................2–6

Adding a Caller on an Inactive Line..................................2–6

Placing Conference on Hold..............................................2–6

Dropping a Conference Participant...................................2–6

4-WAYVOLUME CONTROL......................................................2–7

Handset, Headset, Speaker.......................................................2–7

Dial Tone..................................................................................2–7

SoundPoint Pro Professional Conference Phone User’s Guide

v i

ACCESSING, USING, AND

PROGRAMMING DIRECTORIES..............................................2–7

Navigating the Directories........................................................2–7

Directory Structure ..................................................................2–8

SoundPoint Directory Descriptions and Overview..................2–8

SPEED DIALDIRECTORY........................................................2–10

Entering the Speed Dial Directory (List)...............................2–10

Programming Names and Numbers.......................................2–10

Assigning Priority Tags..........................................................2–10

Editing a Speed Dial Entry......................................................2-11

Viewing Speed Dial Entries ...................................................2–11

Viewing Directory Programming Options..............................2–11

Speed Dial Directory Quick Locator Feature.........................2–12

Dialing Speed Dial Entries.....................................................2–12

Dialing Hot Key Priority Speed Dial Numbers......................2–12

Deleting Speed Dial Entries ..................................................2–12

Clearing the Speed Dial List..................................................2–12

INCOMING CALLHISTORYLIST...........................................2–12

Entering the Incoming Call History Directory.......................2–13

Viewing Incoming Call History Entries ................................2–14

Speed Dialing Incoming Call History Entries........................2–14

Exporting Entries to the Speed Dial List................................2–15

Deleting Incoming Call History Entries.................................2–15

Clearing the Incoming Call History List................................2–15

OUTGOING CALLHISTORYDIRECTORY............................2–16

Entering the Outgoing Call History Directory.......................2–16

Viewing Outgoing Call History Entries ................................2–16

Dialing Outgoing Call History Entries ..................................2–17

Exporting Entries to the Speed Dial List................................2–17

Deleting Outgoing Call History Entries.................................2–17

Clearing the Outgoing Call History List................................2–17

LINE SETTINGS DIRECTORY.................................................2–18

Entering the Line Settings Directory......................................2–18

Setting Ring Volume for Each Line........................................2–18

Setting Ring Type for Each Line............................................2–19

Entering Local Telephone Numbers for Each Line................2–19

Setting Primary Line for Your Phone.....................................2–19

Enabling or Disabling Caller ID for Each Line......................2–20

Editing Line-In-Use Voltage Threshold ................................2–20

Restoring Factory Default Settings for Each Line ................2–20

SoundPoint Pro Professional Conference Phone User’s Guide

v i i

SYSTEM SETTINGS DIRECTORY..........................................2–21

Entering the System Settings Directory.................................2–21

Setting the Time of Day ........................................................2–21

Setting LCD Contrast.............................................................2–21

Setting Repetitive Redial Parameters.....................................2–22

Selecting and Setting Telephone Number Auto-Formatting..2–22

Flash Timing...........................................................................2–23

Changing Flash Timing..........................................................2–23

Restoring Flash Timing Default.............................................2–24

Restoring System Factory Default Settings............................2–24

Information Retention During a Power Loss.........................2–24

Chapter 3 TROUBLESHOOTING ...........................................................3–1

TROUBLESHOOTING.................................................................3–2

No Dial Tone............................................................................3–2

In Speaker Mode: Short Silences, Echoes, or

Clipped Speech.........................................................................3–2

Difficulty with Hearing the Other Party...................................3–2

Blank Display ..........................................................................3–3

Physical Damage .....................................................................3–3

Chapter 4 REGULATIONS AND WARRANTY.................................4–1

U.S. REGULATORYINFORMATION.........................................4–2

Radio/TV Interference .............................................................4–2

Federal Communications Commission (FCC) Notice..............4–2

Signaling Method ....................................................................4–3

Hearing Aid Compatibility ......................................................4–3

Testing Emergency Numbers ..................................................4–3

CANADIAN DEPARTMENTOF

COMMUNICATIONS NOTICE...................................................4–4

POLYCOM LIMITED WARRANTYAND

LIMITATION OF LIABILITY......................................................4–4

Limited Warranty......................................................................4–4

Limitation of Liability..............................................................4–5

Appendix ADDITIONAL INFORMATION ........................................A–1

HEADSETS..................................................................................A–2

About Headsets........................................................................A–2

Headset Types..........................................................................A–3

Headset Selection....................................................................A–3

SOUNDPOINT®PRO

INTRODUCTION AND INSTALLATION

Chapter 1

SoundPoint Pro Professional Conference Phone Introduction and Installation

1 –1

SoundPoint Pro Professional Conference Phone User’s Guide

v i i i

SoundPoint Pro Professional Conference Phone Introduction and Installation

1 –2

SoundPoint Pro Professional Conference Phone Introduction and Installation

1 –3

UNPACKING

The following items are included in your SoundPoint Pro. Check the list before

installation to assure that all items are accounted for. If you are missing any items,

contact your SoundPoint Pro distributor.

Quick Guide User Guide

SoundPoint Pro Console Handset and Cord

Power Adapter Line Interface Module (LIM)

7’Phone Cords (2) Quick Reference Phone Number Label

Headset Hanger Console Cable

INSTALLATION

Installation of SoundPoint Pro is easy. Refer to the Quick Guide for detailed quick setup

instructions.

Preparing for Installation

Preparing to install your phone includes deciding where you want to install the phone,

locating the power outlet closest to your phone, locating your existing telephone wall

jack(s) in your home or office, and determining how your telephone lines are configured

with your telephone jacks.

The SoundPoint Pro Line Interface Module (LIM) allows you to connect two telephone

lines and power to SoundPoint Pro, with only one cable extending to the console for

maximum portability.

INTRODUCTION

Thank you for selecting SoundPoint®Pro—clearly the best choice in professional office

communications. SoundPoint Pro is designed to give you unparalleled conferencing

quality, combined with the convenience of an integrated headset interface, all in a full-

featured, portable desktop unit.

Your SoundPoint Pro delivers the following features:

▼Full-Duplex Conference Phone ▼3-way Integrated Conference Bridging

▼Integrated Caller ID and Caller ID on ▼4-Way Independent Volume Control with

Call Waiting Memory

▼99 Number Speed Dial Directory ▼Distinctive Rings for Each Line

▼99 Number Incoming Call History ▼Programmable Repetitive Redial

▼99 Number Outgoing Call History ▼Any Key Dialing

▼Integrated Headset Amplifier, Keypad ▼Portable Single-Cable-to-Console

Activation, and Headset Hanger Design

▼Keypad-Activated Rear Mic for ▼One-Touch Hot Key Priority

Group Conferencing Speed Dialing

▼And much more!

SoundPoint Pro is designed for you by Polycom—the World’s number one provider of

conferencing products. From small companies to the Fortune 500, from the smallest

conference rooms to the largest boardrooms, you will find more Polycom conferencing

products in more places, than all of our competitors combined.

And now we’ve designed SoundPoint Pro for you, with the same proven technology and

high-quality standards that have made us the most widely used conferencing product line

in the World.

The enclosed Quick Setup Guide contains complete installation instructions and

provides a summary of the most commonly used features, including a description of the

functionality of each key on the phone. Detailed information about features and using

your SoundPoint Pro is available in this User’s Guide.

SoundPoint Pro Professional Conference Phone Introduction and Installation

1 –4

SoundPoint Pro Professional Conference Phone Introduction and Installation

1 –5

Setup 2

If two phone lines share one telephone wall jack, install as in Setup 1 but be sure to

connect the black 7’Phone Cord provided. Continue with Setup 1, steps 3 and 4.

Setup 3

If two phone lines share one telephone wall jack, the phone can be installed without

using the LIM. Connect the black 7’Phone Cord into the TELport on the Console and

the Power Adapter to DC POWER.

GETTING CONNECTED

Phone, Power, and Data Connections

Line Interface Module (LIM)

The Line Interface Module (LIM) provides the convenience of a single cable to your

two-line phone, reducing clutter and improving mobility for conferencing. However, if

your two lines share the same telephone jack, the phone line and power can be connected

directly to the console. See your options in the following section, “Installing the Phone”.

Installing the Phone

Setup 1

See the Quick Guide for detailed installation instructions or follow these steps.

1. Plug one end of either 7’Phone Cord into line port L1 of the LIM and the other end

into the wall jack for Line 1.

2. Repeat step 1 for Line 2 using the other 7’Phone Cord.

3. Connect the double-ended console cable from the LIM to the TEL and DC POWER

ports on the console.

4. Connect the Power Adapter cord to the LIM and plug the Power Adapter into the

electrical outlet.

DATA

Data port allows you to

conveniently connect a Fax

machine or modem to

SoundPoint Pro without

having to locate another

analog phone jack or

disconnect SoundPoint Pro.

TEL

Connect the RJ11 (Phone)

plug from the LIM or

connect a phone line directly.

DC POWER

Connect the power

plug from the LIM or

connect power directly.

SoundPoint Pro Professional Conference Phone Introduction and Installation

1 –6

SoundPoint Pro Professional Conference Phone Introduction and Installation

1 –7

KEYS AND OPERATIONAL FEATURES

Handset Connection

Headset Connection

Astandard 2.5mm headset jack is located at the right front of the console. No amplifier

is required for headsets with a 2.5mm stereo interface plug. Headsets that connect to a

handset port require their own audio amplifier installed according to directions from the

manufacturer.

IMPORTANT: The HEADSETactivation key will not work with headsets that connect

to the handset port.

Note: Headsets may be purchased separately. See Appendix for information about types

of headsets.

Headset Hanger

AHeadset Hanger has been included to help keep the headset out of the way when not in

use. Insert the hanger into the opening at the right rear of the console.

You are now ready to use yourSoundPoint Pro Professional Conferencing Phone.

SoundPoint Pro Professional Conference Phone Operation

2 – 1

SOUNDPOINT®PRO OPERATION

Chapter 2

VISUAL INDICATORS

*Message waiting supported for FSK protocol and most analog PBXs.

SoundPoint Pro Professional Conference Phone Introduction and Installation

1 – 8

MAKING CALLS, ANSWERING CALLS, HANGING UP

Tips for Using the Line Keys

1. When a LINE key is pressed, that line becomes active and any other active lines are

disconnected unless placed on Hold prior to pressing the LINE key.

2. When the CONF key is pressed all active lines and lines on Hold are linked in the

conference.

3. When the HOLD key is pressed, all active lines are placed on Hold. Inactive lines

remain inactive.

4. If SoundPoint Pro is hung up, active lines are disconnected, but lines on Hold

remain on Hold.

Changing Modes

To Switch Between Modes at Any Time During a Call

From To Action

Handset Speaker Press Speaker key; hang up handset

Handset Headset Press Headset key; hang up handset

Headset Speaker Press Speaker key

Headset Handset Pick up handset

Speaker Handset Pick up handset

Speaker Headset Press Headset key

More on Answering Calls

SoundPoint Pro will automatically select the ringing line when you answer. It is not

necessary to select the ringing line first.

When More Than One Incoming Line is Ringing

If both lines are ringing at the same time, the line that is engaged first will ring and its red

LED will blink. The second line’s LED will also blink, but no audible ring will be heard.

When the phone is answered, preference will be given to the primary line (see “Setting

Primary Line for Your Phone” on page 2-19). If no primary line has been programmed,

Line 1 will be selected first.

Second Calls on an Inactive Line

If you have already engaged a call and another call comes in on the line you are not

using, you will be prompted with a low-volume ring and the LED indicator for the

incoming line will blink. If you subscribe to Caller ID, SoundPoint Pro will display

Caller ID information for the incoming call. To answer the call:

Place your call on hold with the HOLD key, then press the LINE key with the red

blinking LED (the ringing line) and begin speaking.

Making Calls

Pick up the handset; listen

for the dial tone.

Put on headset, press the

HEADSET key, and listen

for the dial tone.

Press the SPEAKER key;

listen for the dial tone.

Pressing a LINE key will

activate the phone in

Speaker Mode for that line

by default.

Answering Calls

Pick up the handset

Press the HEADSET key

on the console (make sure

your headset is on first!).

Press the SPEAKER key

on the console.

Pressing a LINE key for a

line that is ringing will

cause the phone to go off-

hook in Speaker Mode for

that line.

Hanging Up

Hang up (replace) the

handset.

Press the HEADSET key.

Press the SPEAKER key.

Pressing a LINE key

while the line is active

will hang up the line.

HEADSET MODE

Pressing the HEADSET key on the console activates Headset Mode. The ▲▼ keys

control headset volume.

Note: See Appendix for information about headsets.

CONFERENCE MODE

Using Lines

The LINE keys and Conference (CONF) key located below the LCD screen control your

conference.

Conference calls can be established by:

1. Placing and conferencing outbound calls

2. Receiving and conferencing inbound calls

3. Conferencing a combination of inbound and outbound calls

SoundPoint Pro Professional Conference Phone Operation

2 –5

SPEAKER MODE

SoundPoint Pro Model SE-225 has two microphones. An additional rear microphone can

be activated from the keypad to maximize microphone coverage for group conferences.

When it is not activated, SoundPoint Pro is optimized for individual use with the front

microphone.

When using Speaker Mode individually, turning off the rear microphone reduces

background noise.

Individual Mode

The rear microphone is off, and the audio pickup and quality are optimized for 180° coverage

Group Mode

The rear mic is activated for 360° coverage

SoundPoint Pro Professional Conference Phone Operation

2 –4

4-Way Volume Control

Handset, Headset, Speaker

Press the ▲▼ keys at any time during a call to adjust volume. SoundPoint Pro will

maintain the same volume for future calls until changed.

Dial Tone

Listen for the dial tone; press the ▲ ▼ keys to adjust the level. Then hang up or make a call.

Dial tone volume will remain at the level set until intentionally changed.

Accessing, Using, and Programming Directories

SoundPoint Pro stores and retrieves information for your convenience. This information

is organized into directories which can be accessed and customized from the keypad.

Navigating the Directories

Pressing SELECT will allow you to:

▼Initially, enter the Directory Structure at the Main Menu level,

▼Once in the Directory Structure, move another level deeper, or

▼Confirm a setting or information youíve selected, entered, or edited.

The ▲

▼appears in the corner of the display when the Directory Structure has more

options or information at that level. You can use the ▲ ▼ keys to scroll continuously

through the options.

The BACK key is the way to:

▼Return to a higher level of the Directory Structure,

▼Back up to remove characters while editing an entry, or

▼When pressed twice in succession, exit the Directory Structure altogether.

SoundPoint Pro Professional Conference Phone Operation

2 –7

Operation

Establishing a Conference Call

Pressing the CONF key when more than one line is active establishes a conference in

any mode—Speaker, Handset, or Headset. Pressing CONF takes callers off Hold and

brings them into the conference.

Example: Setting Up a 3-Way Conference Call (Outbound Calls)

1. Press LINE 1 and dial the number of the first conference participant. When the

party answers, ask him to hold while you add the other participant. Press HOLD.

2. Press LINE 2 and dial the number of the second participant. When the party

answers, tell him you will add him to the conference.

3. Press the CONF key. All participants are now in the conference.

Adding a Caller on an Inactive Line

Incoming Call

1. When a new call is received, ask the active participant to Hold. Press the H O L D k e y.

2. Press the LINE key to answer the incoming call.

3. Tell the incoming caller you will add him to the conference.

4. Press the CONF key.

Outgoing Call

1. Ask the active participant to Hold while you call another participant. Press the

HOLD key.

2. Press the inactive LINE key, and dial the number of the person you wish to add.

3. When the person answers, tell him he is being added to the conference.

4. Press the CONF key.

Placing Conference on Hold

To put a conference call on hold, press the HOLD key. The other participants will not be

able to talk to each other. Press CONF to return to the conversation.

Dropping a Conference Participant

Press the LINE key of the participant you wish to drop from the call.

SoundPoint Pro Professional Conference Phone Operation

2 –6

Outgoing Call History Records calls you have dialed from the Speed Dial

Listing, Call Histories, or manually.

Dials any number in the history when the SPEED DIAL

key is pressed.

Line Settings Stores and displays line configuration parameters.

Contains programming options for line setting

parameters including restoration of factory default line

settings.

System Settings Stores and displays system configuration parameters.

Contains programming options for system parameters

including restoration of factory default system settings.

SoundPoint Pro Professional Conference Phone Operation

2 –9

Speed Dial Listing Lists telephone numbers and names of contacts you

program and store in your phone.

Stores information imported from the Incoming and

Outgoing Call Histories.

Dials any number in the listing when the SPEED DIAL

key is pressed.

Incoming Call History Records calls you have received or missed.

Records Caller ID information including name and

telephone number when you subscribe to your telephone

service provider’s Caller ID service.

Dials any number in the history when the SPEED DIAL

key is pressed.

SoundPoint Pro Professional Conference Phone Operation

2 –8

Directory Structure and Descriptions

Adiagram of the Directory Structure is shown below. Acquaint yourself with this

structure to make navigating easier. The following instructions will guide you through

each of the Menu Options in the Directory Structure.

The available priority tags, with 1 being the highest priority, will be listed on the bottom

line of the LCD. Use the ▲▼ keys to move the blinking cursor over the priority “tag”

you wish to assign, or select “N” for No Tag, then press SELECT.

Once assigned, entries with priority tags will be listed at the beginning of the Speed Dial

Listing in assigned priority.

Editing a Speed Dial Entry

If you wish to edit a Speed Dial List entry, including priority tags, first locate the entry,

then press SELECT . The display will read EDITENTRY? Press SELECT again.

Use SELECT to confirm a correct name or number entry, or edit using the BACK key.

When you are satisfied with the changes, press SELECT to confirm and move to the next

line.

If you wish to edit only the Priority Tag, press SELECT twice to confirm the name and

phone number, the display will read SETPRIORITYTAG. Use the method described

above to edit the Priority Tag.

Viewing Speed Dial List Entries

Upon entering the Speed Dial Directory Listings, if entries have been stored on the

phone, the display will default to the first entry in the Speed Dial List. Multiple entries

will be listed in the following order:

▼Priority Tagged entries (highest priority to lowest, P1, P2, P3, P4, P5, P6, P7, P8, P9, P0)

then

▼Alphabetically

Use the ▲key to scroll through the entry list. Hold the ▲key down to accelerate

through the list quickly.

Viewing Directory Programming Options

While in the Speed Dial Directory Listings, scroll ▼at any time to view Speed Dial

Directory options. Options include deleting individual entries, clearing the entire speed

dial directory, adding entries and editing entries. See each specific option in this section

for details.

SoundPoint Pro Professional Conference Phone Operation

2 –1 1

Speed Dial Directory

Entering the Speed Dial Listing

Press SELECT to view the Main Menu Directory options. The Speed Dial Directory is the

first menu option.

Programming Names and Numbers

Up to 99 separate entries can be stored in the Speed Dial List.

Scroll ▼to ADD NEWENTRY?, press SELECT to begin adding an entry.

Enter the phone number on the keypad. Use the BACK key to back up and correct any

mistakes. Enter special characters if desired.

▼For spaces, press HOLD.

▼For hyphens, press REDIAL.

▼For brackets, press FLASH , once for (and again for )when ready.

Press SELECT to save the number.

Enter the name. Enter each letter by repeatedly pressing the key associated with that

letter until the letter you want appears on the display. Use special characters above as

desired. You are, however, limited to 13 characters.

Press SELECT to save the name.

You will then be prompted to select a Priority Tag for the entry.

Assigning Priority Tags

“Hot Key” priority speed dialing “priority tags” can be assigned to 10 Speed Dial List

entries. You will be prompted to enter a priority tag as each speed dial name and number

entry is completed.

SoundPoint Pro Professional Conference Phone Operation

2 –1 0

For a telephone line with Caller ID, the following information is stored:

▼Caller name

▼Caller phone number

▼Time and date the call was received

▼Line number (1 or 2) upon which the call was received

For a telephone line without Caller ID, the following information is stored:

▼Time the call was received

▼Line number (1 or 2) upon which the call was received

Asubscription to Caller ID service does not guarantee that the desired information for an

Incoming Call History Entry is captured. An Incoming Call History entry is only as good as

the information received.

If the incoming Caller Subscribes to “Call Blocking” service:

▼An ID BLOCKED or ID UNAVAILABLE message is displayed.

▼ANO ID MESSAGE is displayed.

Or the Caller ID fields could be empty due to faulty data transmission.

Entering the Incoming Call History Directory

Press SELECT to view the Main Menu options. Scroll ▼to INCOMING CALLS. If

incoming calls were received but not answered, line 2 of the display will show the

number of calls missed.

If no new calls have been missed line 2 of the display will read NO NEWMISSED

Press SELECT again to enter the Incoming Call History.

SoundPoint Pro Professional Conference Phone Operation

2 –1 3

Speed Dial Entry Quick LocatorFeature

While in the Speed Dial List, use the telephone keypad to spell out the first few letters

for the entry you wish to locate (e.g., to locate Allen, press 2-5-5-3-6). SoundPoint Pro

will display the first match in the directory as each key is pressed until the desired entry

is located. If no matching entry is found the display will read NO MATCH FOUND.

Dialing Speed Dial Entries

Press the SPEED DIAL key at any time while viewing an entry to automatically dial that

phone number.

Dialing Hot Key Priority Speed Dial Numbers

Once assigned, an entry with an assigned priority tag can be dialed by simply holding

down the associated priority key (1, 2, 3,4, 5, 6, 7, 8, 9, 0) for 1.5 seconds.

Deleting Speed Dial Entries

While viewing a Speed Dial entry you wish to delete, press SELECT then scroll ▼to

DELETE ENTRY? Press SELECT. The display will read DELETING ENTRYARE YOU

SURE? Press SELECT again to delete the entry.

Clearing the Speed Dial List

CAUTION: Clearing the Speed Dial Directory will permanently delete all Speed

Dial entries in the directory with no recovery capability.

To clear the Speed Dial List, first enter the Speed Dial Directory. Scroll ▼to CLEAR

SPEED DIALLIST? Press SELECT. The display will read CLEARING LISTARE YOU

SURE? Press SELECT again to clear the entire Speed Dial Directory.

Incoming Call History List

The Incoming Call History List stores a record of the last 99 incoming calls received or

missed. The information stored in a Call History differs depending upon the Caller ID

subscription status of the telephone line(s) connected to SoundPoint Pro. (Caller ID is an

option offered by your telephone service provider, usually for a fee.)

SoundPoint Pro Professional Conference Phone Operation

2 –1 2

Exporting Entries to the Speed Dial List

Phone numbers and names in the Incoming Call History list can be exported to the Speed

Dial List as Speed Dial entries.

Enter the Incoming Call History directory then scroll ▲to locate the entry you wish to

export.

Use the #key to correctly format the phone number for dialing (see previous section)

prior to exporting the entry.

Press the SELECT key. The following display will appear.

Press SELECT again to export the entry. The phone number will appear on the top line of

the LCD. Use the BACK key to insert any desired modifications. When the number

appears as desired, press SELECT .

The name will now appear on the top line of the LCD. Use the B A C K key to insert

modifications. When the name appears as desired (up to 13 characters) press S E L E C T a g a i n .

Deleting Incoming Call History Entries

While viewing an Incoming Call History entry you wish to delete, press SELECT then

scroll ▼to DELETE ENTRY? Press SELECT .The display will read DELETING

ENTRYARE YOU SURE? Press SELECT again to delete the entry.

Clearing the Incoming Call History List

To delete (clear) the Incoming Call History List, first enter the Call History List then

scroll ▼to CLEAR INCOMING CALLLIST? Press SELECT. The display will read

CLEARING LISTARE YOU SURE? Press SELECT again to clear the entire Incoming

Call History List.

SoundPoint Pro Professional Conference Phone Operation

2 –1 5

Viewing Incoming Call History Entries

Up to 99 Incoming Call History entries can be stored. The entries are numbered 1 to 99

from most to least recently received. If you subscribe to Caller ID service, the default

display shows the name and phone number of the caller along with other useful

information.

Press the key to toggle line 1 of the display from the caller name to the time, the

month/day, and Line number on which the call was received.

Use the ▲key to scroll through the entry list. Hold the ▲key down to accelerate

through the list quickly.

Speed Dialing Incoming Call History Entries

Caller ID numbers are received from a telephone service provider in 10-digit format,

however a 10-digit number might not be correctly dialed without first:

▼Removing the area code for local calls or

▼Inserting a “1” in front of the area code for long distance calls.

SoundPoint Pro allows you to do both. While viewing an Incoming Call History entry:

▼Press #once to remove the area code

▼Press #twice to add a “1” to the dialing string to dial outside your area code

Once the number appears as desired, press SPEED DIAL to automatically dial the number.

SoundPoint Pro Professional Conference Phone Operation

2 –1 4

SoundPoint Pro Professional Conference Phone Operation

2 –1 7

SoundPoint Pro Professional Conference Phone Operation

2 –1 6

Dialing Outgoing Call History Entries

Press the SPEED DIAL key while viewing any entry to automatically dial that entry’s

phone number.

Exporting Entries to the Speed Dial List

Outgoing Call History entries can be exported to the Speed Dial List. To export an

Outgoing Call History entry, locate the entry you wish to export then press SELECT .

Then, follow the instructions on Page 2-15, “Exporting Entries to the Speed Dial List”.

Deleting Outgoing Call History Entries

While viewing an Outgoing Call History entry you wish to delete, press SELECT then

scroll ▼to DELETE ENTRY? Press SELECT, the display will read DELETING ENTRY

ARE YOU SURE? Press SELECT again to delete the entry.

Clearing the Outgoing Call History List

To delete (clear) the Outgoing Call History List, first enter the Outgoing Call History

Directory then scroll ▼to CLEAR OUTGOING CALLLIST? Press SELECT .The

display will read CLEARING LISTARE YOU SURE? Press SELECT again to clear the

entire Outgoing Call History List.

Outgoing Call History Directory

The Outgoing Call History Directory is a record of all calls dialed from the Speed Dial

List, the Incoming Call History List, via redial, or dialed manually. The information

stored in each entry reflects the source from which it was dialed. If dialed from the

Speed Dial List, for example, the entry can contain a phone number and name. If dialed

manually, the entry will record only a phone number.

Entering the Outgoing Call History Directory

Press SELECT to view the Main Menu options, scroll ▼to OUTGOING CALLS.

Press SELECT again to enter the Outgoing Call History List.

Viewing Outgoing Call History Entries

Upon entering the Outgoing Call History List, the display will show a record of the most

recently dialed call. Use the ▲key to scroll through the entry list. Hold the ▲key down

to accelerate through the list quickly. The information displayed in an entry is dependent

upon the method by which the call was dialed.

Below is an example of a manually dialed call, with auto-formatting disabled.

If an outgoing call is dialed from a list that contains a name—the Speed Dial List or the

Incoming Call History List, the name will be shown on the first line of the display.

Pressing the key will toggle between the name and the Time and Line number upon

which the call was made. Following is an example of the same outgoing call dialed from

the Speed Dial List.

SoundPoint Pro Professional Conference Phone Operation

2 –1 8

Setting Ring Type forEach Line

SoundPoint Pro has 5 different ring types available for each line.

While viewing a line settings status, press SELECT to view the line setting options for that

line. Scroll ▼to EDITRING TYPE? Line 2 of the display will show the current ring

type setting. Press SELECT again to set Ring Type.

To toggle between and listen to the ring types available, use ▲▼ to scroll through the

options. Each ring will be played as the options appear on the display.

Press SELECT to choose the desired ring.

Entering Local Telephone Numbers forEach Line

While viewing a line setting status, press SELECT to view the line settings options for that

line. Scroll ▼to EDITTELNUMBER? Line 2 of the display will show the current

telephone number configured for the line. Press SELECT again.

Enter the desired phone number on the keypad. Use special characters as desired.

▼For spaces, press HOLD .

▼For hyphens, press REDIAL .

▼For brackets, press FLASH , once for (and again for )when ready.

When the number appears as desired, press SELECT.

Setting Primary Line forYourPhone

Assigning a Primary Line reduces the likelihood of conflicts when two phone lines are

used in parallel (more than one phone user has access to a line). SoundPoint Pro allows

you to set the Primary Line used for your phone. The Primary Line is automatic-ally

selected when the phone is taken off-hook by lifting the handset, pressing the HEADSET

key, or pressing the SPEAKER key.

While viewing a line settings status, press SELECT to view the line setting options for that

line. Scroll ▼to EDITPRIMARY? Line 2 of the display will show the current primary

line selection. Press SELECT again.

Find the desired primary line number display using the ▲▼ keys. Press SELECT again to

choose the desired primary line number.

SoundPoint Pro Professional Conference Phone Operation

2 –1 9

Line Settings Directory

The Line Settings Directory allows you to view status of—and program options for—a

variety of line configuration settings, including:

▼Setting Ring Volume for each Line

▼Setting Ring Type for each Line

▼Entering Local Telephone Numbers for each Line

▼Setting Primary Line for Your Phone

▼Enabling or Disabling Caller ID for each Line

▼Editing Line-in-Use Voltage Threshold

▼Restoring Factory Default Settings for each Line

Entering the Line Settings Dire c t o ry

Press SELECT to view the Main Menu options, scroll ▼to LINE SETTINGS:

Press SELECT again to enter the Line Settings Directory. The current line settings status

for Line 1 will show on the display. Scroll ▼to view the current line settings status of

line 2.

Setting Ring Volume forEach Line

While viewing a line settings status, press SELECT to view the line settings options for

that line. EDITRING VOL? is the first option. Press SELECT .

Use ▲▼ to adjust ring volume to the desired level. The ring will be heard on the speaker

as it is being adjusted. When the desired ring volume level is found, press SELECT .

System Settings Directory

The System Settings Directory allows you to view status of—and program options for—

a variety of system settings, including:

▼Setting the Time of Day

▼Setting the LCD Contrast

▼Setting Repetitive Redial Parameters

▼Selecting and Setting Telephone Number Auto-Formatting

▼Editing Flash Timing; Restoring Default Flash Timing

▼Restoring System Factory Default Settings

Entering the System Settings Directory

Press SELECT to view the Main Menu options, scroll ▼to SYSTEM SETTINGS. Press

SELECT again to enter the System Configuration Directory.

Setting the Time of Day

Upon entering the System Settings Directory, EDITTIME? is displayed. Press SELECT to

edit the time of day.

Enter the correct time hh:mm. After hours and minutes are entered, a prompt will appear

for AM or PM, which can be set by pressing the 1 or 2 keys, respectively. When the

correct time is entered, press SELECT .

Setting LCD Contrast

SoundPoint Pro allows you to control how light or dark the LCD display appears. Enter

the System Settings Directory then scroll ▼until you see E D I TLCD CONTRAST?A

progressive contrast status bar will show the current contrast setting. Press SELECT .

Use the ▲▼ keys to adjust the LCD contrast to the desired level, then press SELECT .

SoundPoint Pro Professional Conference Phone Operation

2 –2 1

Enabling orDisabling CallerID for Each Line

While viewing a line settings status, press SELECT to view the line settings options for

that line. Scroll ▼to EDITCALLER ID? Line 2 of the display will show the current

Caller ID status for that line. Press SELECT again.

Use ▲ ▼ to change Caller ID status. When the desired status displayed press S E L E C T a g a i n .

Editing Line-In-Use Voltage Threshold

While on-hook (hung up) SoundPoint Pro will indicate if another phone, computer, or

Fax machine is using one or both phone lines by lighting the LINE key LED indicators

solid red. Line-in-use detection is accomplished by detecting the voltage on each line,

which changes when a line is in use. Different phone systems may have different line-in-

use voltages. SoundPoint Pro allows you to change the line-in-use voltage threshold to

account for voltage variances by telephone system. If the SoundPoint Pro Console’s line-

in-use indicators are not lighting solid red while a line is being used by another device,

try changing the line-in-use voltage settings until the correct level is achieved.

While viewing a line settings status, press SELECT to view the line settings options for

that line. Scroll ▼to EDITIN-USE? Line 2 of the display will show the current line-in-

use selection: STANDARD, ALTERNATE A, or ALTERNATE B. Press SELECT again.

Use ▲▼ to scroll through line-in-use status options. When the desired status is displayed

press SELECT again.

Restoring Factory Default Settings forEach Line

All factory default settings can be restored at once for each line. Make sure you wish to

restore ALLfactory settings before proceeding with this feature.

While viewing a line settings status, press SELECT to view the line settings options for

that line. Scroll ▼to RESTORE DEFAULT LINE SETTINGS? Press SELECT again.

If you are sure you wish to restore all line settings, press SELECT again.

SoundPoint Pro Professional Conference Phone Operation

2 –2 0

When programming Auto-Formatting, be sure to select your dialing plan according to

the specific requirements for your area.

To set up Auto-Formatting, enter the System Configuration Directory then scroll ▼until

you see EDITAUTOFORMAT? Line 2 of the LCD will show the current Auto-

Formatting settings.

Press SELECT .to begin Auto-Formatting. Use ▲▼ to toggle the status of the auto-

formatting feature, DISABLED or ENABLED. When the desired status appears press

SELECT .If you chose Auto-Formatting ENABLED you will be prompted to enter your

desired Dialing Plan. Use ▲▼ to toggle between Dialing Plan options and press SELECT

when ready. You will then be prompted to enter your area code. Use the keypad to enter

your 3-digit area code, then press SELECT .

Flash Timing

The FLASH key allows SoundPoint Pro to access certain features (such as conferencing)

for some telephone systems. Different telephone systems may require different flash

timing settings in order to access these features. SoundPoint Pro allows you to select

from four Flash Timing values to configure the phone. If SoundPoint Pro is configured

with a telephone system, such as a PBX or KSU system, ask your telephone system

administrator for the correct flash timing setting, in milliseconds (msec) for your specific

system.

Changing Flash Timing

Enter the System Settings Directory then scroll ▼ until you see EDITFLASH TIME?

Line 2 of the LCD will show the current flash timing value. Press SELECT .

Use the ▲▼ keys to scroll through the flash timing options.

▼75 msec,

▼100 msec,

▼300 msec, or

▼600 msec. (Note: The default flash timing setting is 600 msec.)

When the desired flash timing is displayed, press SELECT.

SoundPoint Pro Professional Conference Phone Operation

2 –2 3

Setting Repetitive Redial Parameters

Repetitive Redial automatically redials a telephone number that is either busy or is not

being answered. SoundPoint Pro allows you to configure the number of redial attempts,

up to 15, and the duration time between attempts, up to 90 seconds, when repetitive

redial is activated. (Note: Upper limits are set by telephony standards).

ForRepetitive Redial

Enter the System Settings Directory then scroll ▼until you see EDITRPTDIAL? Line

2 of the LCD will show the current values of attempts (TRIES) and duration between

attempts (SEC). Press SELECT .

Enter the desired number of redial tries, between 2 – 15. Press SELECT .

Enter the number of seconds between redial tries, between 10 – 90. Press SELECT .

Selecting and Setting Telephone NumberAuto-Formatting

The auto-formatting feature of SoundPoint Pro can automatically format phone numbers

stored in the Incoming and Outgoing Call History Lists. When numbers are received via

Caller ID, or as numbers are dialed, each number can be automatically formatted when

stored via the Incoming and Outgoing Call History Lists. SoundPoint Pro provides three

dialing plans to select from to format numbers for storage and for dialing.

7 DIGITLOCAL (D7) In most areas, 7 digits are required to dial local tele-

phone numbers. By entering your area code, all numbers

with a matching area code will be stored and dialed in 7-

digit format for Incoming and Outgoing Call History.

10 DIGITLOCAL (D10) In some areas, 10 digits will be required to dial local and

long distance telephone numbers. The 10-digit plan uses

all 10 digits of a number when numbers are stored and

dialed for Incoming and Outgoing Call History.

11 DIGITLOCAL (D11) In some areas, 11 digits will be required to dial local and

long distance telephone numbers. The 11-digit plan uses

all 10 digits of a number and adds a “1” at the beginning

of the number when numbers are stored and dialed for

Incoming and Outgoing Call History.

SoundPoint Pro Professional Conference Phone Operation

2 –2 2

SoundPoint Pro Professional Conference Phone Troubleshooting

3 –1

SOUNDPOINT®PRO TROUBLESHOOTING

Chapter 3

Restoring Default Flash Timing

Enter the System Settings Directory then scroll ▼ until you see EDITFLASH TIME?

Press SELECT. Scroll ▲ until you see RESTORE DEFAULT FLASH TIME? Press

SELECT.

Restoring System Factory Default Settings

All factory system settings can be restored at the same time. Make sure you wish to

restore ALLfactory system settings before proceeding with this feature.

Enter the System Settings Directory then scroll ▼until you see RESTORE DEFA U LT

SYSTEM SETTINGS? Press S E L E C T the following will appear on the display.

If you are sure you wish to restore all line settings, press SELECT again.

Information Retention During a Power Loss

Soundpoint Pro retains all stored information during loss of power. It is not necessary to

reset any programmed or stored parameters.

CAUTION: SoundPoint Pro will not operate without power. See the “Safety

Instructions” on Page ii for precautions.

SoundPoint Pro Professional Conference Phone Operation

2 –2 4

TROUBLESHOOTING

Troubleshooting will help you overcome difficulties that occur during installation and

normal use.

No Dial Tone

▼Check the connections of the telephone lines to the LIM, and make sure that the

connections are secure at both the wall jack, and on the LIM. Repeat the process for

the telephone connection from the LIM to the console, and make sure both ends of

the console cable are securely plugged in.

▼Be sure the power cable is connected to the console, and the power adapter is plugged

securely into a working wall outlet or power strip.

▼If you are not receiving dial tone on a headset, but you can hear dial tone on the

handset and speaker, make sure the 2.5mm connector is plugged securely into the

headset jack on the console.

▼Try a different phone line.

In Speaker Mode: Short Silences, Echoes, or Clipped Speech

▼At the beginning of a call, allow someone at each location to speak in turn for few

moments to enable SoundPoint Pro to adapt to its environment.

▼Avoid moving the SoundPoint Pro console when in use.

▼Do not cover or block the microphone(s) with hands, papers, cups, etc., during use.

Difficulty with Hearing the Other Party

▼Noisy equipment such as a copy machine may make it difficult for you to hear the

other party. Both parties should turn off any noisy equipment while talking.

▼Try calling again to see if another line provides a better connection.

▼Check that the power adapter is plugged into a working outlet and the power plus is

securely plugged into the console.

You Can’t Hear

▼Use the ▲ key to adjust the volume for handset, headset, or speaker.

YourCaller Can’t HearYou

▼If using the handset, check the handset cord connections.

▼Be sure that the phone is not on Mute, as indicated by the lit LED on the Mute Key.

▼If using a headset, check the connection to the console and make sure that the

microphone is properly positioned in front of your mouth.

▼If using the speaker, and the listener is having trouble hearing participants seated

behind the phone, activate the rear microphone.

SoundPoint Pro Professional Conference Phone Troubleshooting

3 –2

Blank Display

▼Check that the power adapter is plugged into a working outlet, and the power plug is

securely plugged into the console.

Physical Damage

▼If physical damage is severe enough that the internal parts become visible, disconnect

SoundPoint Pro immediately. Do not reconnect it to the telephone network until

SoundPoint Pro is repaired.

▼If you need more help, call your Polycom reseller, or call Polycom Technical Support

at: 1-800-POLYCOM.

SoundPoint Pro Professional Conference Phone Troubleshooting

3 –3

SoundPoint Pro Professional Conference Phone Regulations and Warranty

4 – 1

SOUNDPOINT®PRO

REGULATIONS AND WARRANTY

Chapter 4

SoundPoint Pro Professional Conference Phone Troubleshooting

3 –4

advance. But if advance notice is not practical, you will be notified as soon as possible.

You will be informed of your right to file a complaint with the FCC.

Your telephone company may make changes in its facilities, equipment, operations, or

procedures that could effect the proper functioning of your equipment. If they do, you

will be notified in advance to give you an opportunity to maintain uninterrupted

telephone service.

If you experience trouble with the SoundPoint Pro, please contact Polycom for

information on obtaining service or repairs. The Telephone Company may ask that you

disconnect this equipment from the network until the problem has been corrected or until

you are sure that the equipment is not malfunctioning.

No user serviceable parts are contained in this equipment.

This equipment may not be used for coin service provided by the Telephone Company.

Connection to party lines is subject to state tariffs. (Contact the state Public Utilities

Commission or Corporation forinformation.)

Do not attempt to repair this equipment yourself. For repair or warranty information,

contact:

Polycom Customer Service: 1-800-POLYCOM

Or write to Customer Service at:

Polycom, Inc.

1565 Barber Lane

Milpitas, CA 95035

Signaling Method

The unit’s push-key dial allows it to signal in tones (DTMF). It can complete calls to

local and long-distance lines and can also complete long-distance calls via computer

phone systems such as MCI or SPRINT.

Hearing Aid Compatibility

The telephone is compatible with hearing aids equipped with telecoil option and is

compliant with requirements for hearing aid compatibility of the Americans with

Disabilities Act (ADA).

Testing Emergency Numbers

Check with local authorities before making any test calls to emergency numbers. Remain

on the line and briefly explain to the dispatcher the reason for calling before hanging up.

Place such calls in off-peak hours, such as early morning or late evening.

SoundPoint Pro Professional Conference Phone Regulations and Warranty

4 –3

U.S. Regulatory Information

Radio/TV Interference

Equipment with electronic push-key dials generates and uses radio frequency energy,

and if not installed and used properly, may cause interference to radio and television

reception. This equipment has been tested and found to comply with the limits for a

Class B digital device in accordance with the specifications in Part 15 of the FCC rules.

While these rules are designed to provide reasonable protection, there is no guarantee

that interference will not occur in a particular installation. You can determine whether

interference occurs by monitoring your radio or television reception while placing a call.

If your telephone causes interference, one of the following measures may correct the

problem:

▼Reorient or relocate the receiving TV or radio antenna, where this can be done safely.

▼Move the telephone and the radio or television further away from each other, or

connect the telephone and the radio or television to outlets on separate circuits.

Consult the dealer or an experienced radio/television technician for additional

suggestions.

Federal Communications Commission (FCC) Notice

This equipment complies with Part 68 of the FCC Rules. On the bottom of the base of

this equipment is a label that contains, among other information, the FCC Registration

Number and Ringer Equivalence Number (REN) for the equipment. You must, upon

request, provide this information to your phone company. (Note: REN is not required

for some types of analog ordigital facilities.)

This equipment uses an RJ11.

An FCC compliance telephone cord and modular plug is provided with this equipment.

This equipment is designed to be connected to the telephone network or premises wiring

using a compatible modular jack which is Part 68 compliant. See installation instructions

for details.

The REN is useful to determine the quantity of devices you may connect to your

telephone line and still have all those devices ring when your telephone number is called.

In most, but not all areas, the sum of the RENs of all devices connected to one line

should not exceed five (5). To be certain of the number of devices you may connect to

your line, as determined by the REN, you should contact your local telephone company

to determine the maximum REN for your calling area. (NOTE: REN is associated with

loop-start and ground-start ports. Do not use forE&M ordigital ports.)

If your telephone equipment causes harm to the telephone network, the Telephone

Company may discontinue your service temporarily. If possible, they will notify you in

SoundPoint Pro Professional Conference Phone Regulations and Warranty

4 –2

Polycom's obligation to repair, replace, or refund, as set forth above, is your exclusive

remedy.

Except as specifically set forth above, Polycom, its affiliates, suppliers, and dealers make

no warranties, express or implied, and specifically disclaim any warranties of

merchantability or fitness for a particular purpose.

Limitation of Liability

Except as provided below, the liability of Polycom and its affiliates and suppliers for any

claims, losses, damages, or expenses from any cause whatsoever (including acts or

omissions of third parties), regardless of the form of action, whether in contract, tort, or

otherwise, shall not exceed the lessor of: (1) the direct damages proven; or (2) the repair

cost, replacement cost, license fee, annual rental charge, or purchase price, as the case

may be, of the equipment that gives rise to the claim. Except as provided below,

Polycom and its affiliates and suppliers shall not be liable for any incidental, special,

reliance, consequential, or indirect loss or damage incurred in connection with the equip-

ment. As used in this paragraph, consequential damages include, but are not limited to,

the following: lost profits, lost revenues, and losses arising out of unauthorized use (or

charges for such use) of common carrier telecommunications services or facilities acces-

sed through or connected to the equipment. For personal injury caused by Polycom's

negligence, Polycomís liability shall be limited to proven damages to person. No action

or proceeding against Polycom or its affiliates or suppliers may be commenced more

than twenty-four (24) months after the cause of action accrues. THIS PARAGRAPH

SHALLSURVIVE FAILURE OF AN EXCLUSIVE REMEDY.

SoundPoint Pro Professional Conference Phone Regulations and Warranty

4 –5

Canadian Department of Communications Notice

Notice: The Canadian Department of Communications (DOC) label identifies certified

equipment. This certification means that the equipment meets certain telecommunication

network protective, operational, and safety requirements. The department does not

guarantee the equipment will operate to the userís satisfaction.

Before installing this equipment make sure you are permitted to connect it to the

facilities of the local telecommunications company. You must install the equipment using

an acceptable method of connection. In some cases you may also extend the companyís

inside wiring for single line individual service by means of certified connector assembly

(telephone extension card.) You should be aware, however, that compliance with the

above condition may not prevent degradation of service in some situations.

Polycom Limited Warranty and Limitation of Liability

Limited Warranty

Polycom warrants you, the customer, that your system will be in good working order on

the date Polycom or its authorized reseller delivers or installs the system, whichever is

later (Warranty Date). If you notify Polycom or its Authorized Dealer within one year of

the Warranty Date that your system is not in good working order, Polycom will, without

charge to you, repair or replace, at its option, the system components that are not in good

working order. Repair or replacement parts may be new or refurbished and will be

provided on an exchange basis. If Polycom determines that your system cannot be

repaired or replaced, Polycom will remove the system and, at your option, refund the

purchase price of your system or apply the purchase price towards the purchase of

another Polycom system. If you purchased your system directly from Polycom,

Polycom will perform warranty repair in accordance with the terms and conditions of the

specific type of Polycom maintenance coverage you selected. Awritten explanation of

Polycom's types of maintenance coverage may be obtained from Polycom by calling

1.800.451.0995 (in the continental U.S. only). If you purchased your system from a

Polycom Authorized Dealer, contact your reseller for the details of the maintenance plan

applicable to your system.

This Polycom limited warranty covers damage to the system caused by power surges.

Unless otherwise expressly agreed to in a written agreement signed by Polycom,

Polycom will not be responsible under this limited warranty for damages resulting from:

Failure to follow Polycom's installation, operation, or maintenance instructions.

Unauthorized system modification, movement, or alteration.

Unauthorized use of common carrier communication services accessed through the

system.

Abuse, misuse, negligent acts or omissions of the customer and persons under the

customer's control; or

Acts of third parties and acts of God.

SoundPoint Pro Professional Conference Phone Regulations and Warranty

4 –4

SoundPoint Pro Professional Conference Phone Appendix

A –1

SOUNDPOINT®PRO

ADDITIONAL INFORMATION

Appendix

SoundPoint Pro Professional Conference Phone Regulations and Warranty

4 – 6

Headset Selection

If you are interested in purchasing a headset, you should decide which type is best for

you, and also take into consideration:

Sound Quality

Some headset manufacturers use noise reduction technology to enhance sound quality.

Like high-quality conferencing equipment, good sound quality in a headset can improve

productivity and make daily business communications more enjoyable.

Comfort/Wearability

Headsets are traditionally worn by people who spend a great deal of time on the phone,

so choosing one that’s comfortable—and stays that way—makes a big difference. Make

sure that the headset you chose is comfortable to wear, and maintains its shape when it’s

not on your head.

SoundPoint Pro Professional Conference Phone Appendix

A –3

HEADSETS

About Headsets

If you use the phone frequently or for extended periods of time, headsets can make your

life much easier. Headsets, like speakerphones or conference phones, allow you to use

your hands while talking on the telephone.

One advantage headsets have over speakerphones and conference phones is the added

dimensions of privacy and decreased office noise. Headsets, like handsets, allow only

half of a conversation to be overheard. This maintains a level of semi-privacy, while

reducing the amount of noise heard in and around the office.

Headsets can be challenging, however, for a person who needs to get up from his or her

desk frequently. Replacing the headset plug into the headset jack or putting the headset

back on and adjusting it, can be more cumbersome than picking up the handset, or going

off-hook on the conference phone.

Most people, however, find headsets to be a valuable communications tool. When using

a headset in addition to a handset and conference phone, the headset can become an

indispensable part of a multi-functional approach to business communications.

Some business and SOHO (small office/home office) telephones like SoundPoint Pro are

“headset-ready”, meaning they have a connector (2.5mm phone jack, or a non-standard

connector for use only with the phone maker’s headset) and a separate button to go off-

hook without lifting the receiver.

Many headsets require an adapter/amplifier to work with a business telephone. Most of

these headsets require plugging the amplifier into the handset jack, then plugging the

handset into a receptacle on the side of the amplifier. This arrangement can be a

nuisance, especially since you must always take the handset off-hook to use the headset.

To compound these problems, some headsets require that you select DIPswitch settings

to get the sound right, and then adjust a separate volume control on the amplifier.

SoundPoint Pro has an integrated headset amplifier and complete compatibility with all

telephone functionality. SoundPoint Pro comes standard with a headset hanger.

There are many different options and styles of headsets to choose from. Following is an

overview of what to look for in a headset.

SoundPoint Pro Professional Conference Phone Appendix

A –2

Headset Types

There are three basic types of headsets:

Binaural headsets are held on by a “headband” and have

earpieces that provide sound to—and cover—both ears.

This helps to block out background noise better than the

other types.

Monaural headsets are also held in place by a headband

but cover just one ear. The single earpiece can sit in the

ear—actually fitting into the ear canal with a microphone

attached—or cover the ear using a foam or “leatherette”

cushion.

In-the-earheadsets fit in, or over the ear, or grasp the ear

itself to stay in place. These headsets are popular with

people who like to avoid the adverse effects of the other

types of headsets on hairstyles, etc.

SoundPoint Pro Professional Conference Phone Appendix

A –5

SoundPoint Pro Professional Conference Phone Appendix

A –4

Durability

Make sure you choose a headset durable enough to withstand a fair amount of wear and tear.

Headsets should stand up to twisting and stretching, and in home offices, to family use.

Cleanability

Headsets with removable microphone covers, ear cushions, and voice tubes allow for

easy cleaning or, if necessary, replacement. If you foresee using a headset extensively ,

look for one that is easy to keep clean.

Warranty

If your headset breaks, you will want to get it replaced. Look for a headset with a good

warranty as it often reflects the manufacturer’s confidence in the durability of the

product.

Polycom Soundpoint Pro Se 225 Users Manual SE225 User Guide

Pro SE-225 to the manual 925b9e2d-4b75-4c9c-992a-bd319ad15ebd

Navigation menu

Versions of this User Manual:

Views

Navigation