Porta Phone DST1915 FULL DUPLEX WIRELESS COMMUNICATION SYSTEM User Manual
Porta Phone Company Inc FULL DUPLEX WIRELESS COMMUNICATION SYSTEM Users Manual
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2942097 |
| Application ID | VNQ3XqDnlFM1iSwS0rc6eg== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 19.25kB (240644 bits) |
| Date Submitted | 2016-03-25 00:00:00 |
| Date Available | 2016-03-25 00:00:00 |
| Creation Date | 2017-11-22 04:12:26 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-11-22 04:12:26 |
| Document Title | Microsoft Word - WIRELESS_SYSTEMSuserManual_BS+HS.doc |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | Administrator |
FULL DUPLEX WIRELESS COMMUNICATION SYSTEM user manual Introduction Thank you for your choice of FULL DUPLEX WIRELESS COMMUNICATION SYSTEM. This is a DECT (Digital Enhanced Cordless Telecommunications) duplex wireless system. To the quality of audio and to the safety offered from the digital technology, The offers manifold and useful features including duplex wireless system, LED In use illumination, multi-headset capabilities and multi-volume select. Please read this instruction carefully before using your new system for the first time. A glance guide for the headset ComStar-S(HDST1915) ComStar-D(HDST1915) ComStar Xtreme(HDST1915) ComStar XTC(HDST1915) ComPAK(BPK1015) Power on/off Power on/off Vol down Power on/off Vol up Vol up Vol up Vol down Vol up Vol down Vol down A glance guide for the base unit Flex Max COM Center(FLX2015) COM Center Pro2000(PRO2015) ComSTAR XTC Base(XTCB2015) All Conference SUB key B channel indicator (RED LED) Connector for Cord Headset Vol Down Vol up All Conference A channel indicator (GREEN LED) Installation Please check your package that included the following items: -Base Unit (Flex Max COM Center(FLX2015)/ COM Center Pro2000(PRO2015)/ ComSTAR XTC Base(XTCB2015)) -Wireless Headset (ComStar-S(HDST1915)/ ComStar-D(HDST1915)/ ComStar Xtreme(HDST1915)/ ComStar XTC(HDST1915); ComPAK(BPK1015)) -Wire Headset (Max 3G-S / Max 3G-D) -AC / DC adaptor for Base Unit - Base packing batterie - Headset packing batterie Choose a suitable site for the base unit, make sure it is not near to other electrical equipments. Page 1 Connect the AC adaptor socket to the Base Unit and the power socket. Turn on the power of base. SUB key A1-A4, B1-B4 Under Bottom Power on/off Power on/off Charging indicator Charging indicator And low battery indicator AC Adapter socket AC Adapter socket And low battery indicator battery pack battery pack The pack rechargeable batteries come with your charger. -Insert the rechargeable battery into the headset as the above figure indicated, matching correct polarity. -Fit the battery compartment cover by sliding it down so that it clicks firmly into place. NOTE: Reversing the orientation may damage the headset. Please use the battery type supplied or recommended equivalents. A different battery could cause an explosion or damage of your headset. Low battery indicator Whenever you see the low battery indicator LED flash on the headset, or you have heard the low battery warning tone during a call conversation, please: -End the call as soon as possible. -Change the headset battery. To charge the battery, put the battery into the charger cradle. The charging LED on charger unit will come on to indicated that the battery is in charging. Basic Functions Make a talk -Power up the headset to search registered of base, the “In use” LED is ON. During a talk conversation, you can adjust the talk volume (1 ~ 5 levels) by simply pressing or key. Mute -During a call conversation, you can mute your voice by rise up microphone arm. -Deactivate the mute function, go down the microphone arm again. Headset Power On / Off To power Off the headset - Press and hold “power on/off” key about 3 seconds, the headset will switch off which can prolong the use time of headset. To power On the headset -Press “power on/off” key The headset will power on with the “In use” LED light, the headset to search registered of base. Out of range indication If your headset has registered and is in located range, the “In use” LED will blanking steadily, when your headset goes out of range, the communication link will be lose temporarily, the “In use” LED will blink. Page 2 If you go back to the located range again, the communication link will restore, also the “In use” LED will blanking steadily. Note: your talk will be cut without any audible warning tone if you are in a talk and out of the located range. Registration The headset and base shall be factory pre-registered with the identification digital security codes, which are stored into the non-volatile memory, so that your headset shall be ready for working after out-of-box. However, your headset shall also has a procedure to allow you to re-do the registration operation in case of the link is lost accidentally. -press key 3 times, Press and hold key for 3 seconds on the headset “In use” LED is ON, your headset entered the registration mode -Press and hold SUB key for 3 seconds on the base until “SUB” LED is flashlight, the base also entered the registration mode. Note: SUB key A1-A4 is for channel A station, B1-B4 is for channel B station. -About 5-10 seconds the headset “In use” LED is OFF and following to ON, that means the headset has located the base, and the base until “SUB” LED is OFF and following to ON. -If the headset does not locate the base, the headset “In use” LED will be blink after 15 seconds and it will return to the non-located mode. Try again and check that you are not in the interference environment Note: your base can register up to eight headsets. One headset register on the every subscribe key. Unsubscribe headset registered -At standby mode -Press and hold SUB key enter the base’s registration mode with the “SUB” LED is flashlight -Press SUB key 7 times again the “SUB” LED is quick flash -All headsets registered to this part are cleared Note: (1)SUB key A1orA2 to unsubscribe both A1 and A2. (2)SUB key A3orA4 to unsubscribe both A3 and A4. (3)SUB key B1orB2 to unsubscribe both B1 and B2. (4)SUB key B3orB4 to unsubscribe both B3 and B4. Conference talk When you are in a talk on the base, you can invite another channel headset to join your conversation. -Press the “All Conference” key on the base that you want to talk. -At the all conference mode, either wireless headset and four cord headset can conference. -Press the “All Conference” key on the base once again, turn off the all conference mode. LIMITED WARRANTY This limited warranty only applies to the use of this device with a communications service for which it is designed. This device alone does not provide the customer with any communications service and requires a separate subscription to a communications service from a service provider. Altering service provider-specific settings may void the warranty. This limited warranty does not warrant that the device will be free of any limitations of voice quality or service caused by (1) the services provided by the customer’s underlying communications service provider; or (2) interference from other radio frequencies or transmissions, static electricity, and other electronic devices. Exposure to Radio Frequency (RF) Signals This wireless headset is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits Page 3 for exposure to radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on the safety standards previously set by both U.S. and international standards bodies. These standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. FCC information Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Modifications not expressly approved by PortaPhone could void the user's authority to operate the equipment. Privacy of communications may not be ensured when using this equipment. IC Information This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil nedoit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. The device is compliance with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance. Le présent appareil est conforme .Après examen de ce matériel aux conformité ou aux limites d’intensité de champ RF,les utilisateurs peuvent sur l’exposition aux radiofréquences et la conformité and compliance d’acquérir.les informations correspondantes. Page 4
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Author : Administrator Create Date : 2015:12:17 10:29:34+08:00 Modify Date : 2016:03:25 11:33:56-07:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2016:03:25 11:33:56-07:00 Format : application/pdf Title : Microsoft Word - WIRELESS_SYSTEMSuserManual_BS+HS.doc Creator : Administrator Producer : Acrobat Distiller 9.0.0 (Windows) Document ID : uuid:9931c68e-e87a-4185-8fae-64c740994d34 Instance ID : uuid:fb87d974-8271-4770-b175-4daa646cf7c3 Page Count : 4EXIF Metadata provided by EXIF.tools