Power Idea Technology RG129 GSM Digital Mobile Phone User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3539988
Application ID	3zVMgMCtfMjq5g5SjeqpSA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	Yes
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	122.52kB (1531555 bits)
Date Submitted	2017-09-01 00:00:00
Date Available	2017-09-01 00:00:00
Creation Date	2017-08-29 15:08:32
Producing Software	Corel PDF Engine Version 17.1.0.572
Document Lastmod	2017-08-29 15:08:32
Document Title	User Manual
Document Creator	CorelDRAW X7
Document Author:	Administrator

This user manual is on the basis of mobile phone default
setting.
Upload, download or synchronize will be charged by the
SIM supplier.
Safety info:
Do not use the mobile phone in the gas station, fuel or
chemicals nearby.
Please do not use the damaged power cable, charger or power
sockets.
Please do not touch the power cable with wet hand or pull the
cable to remove the charger.
Please use the original charger.
Please do not use the leaking or damaged battery.
2 7
RG129
Quick Start Manual
Dual SIM Dual Standby
yes
Phonebook
300
Hands-free
yes
SMS
yes
Caller ID
yes
Alarm/calendar
yes
Frequency
GSM900/DCS1800
Camera
Rear camera 0.3MP
MP3/recorder
yes
Call waiting
yes
USB mode/memory mode
yes(memory card)
Bluetooth
supports Bluetooth 2.1
Torch
yes
Descriptiond
3. Install the battery
Insert the battery as shown. The metal end of the battery
should be firstly inserted. Then insert the battery cover and
lock the battery cover with the battery cover screws.
4. USB port charge Insert the USB cable to the mobile phone.
For the first charge please allow to charge fully for 12 hours.
function
Menu key
1. In standby interface can enter
the main menu
2. Answer a call
GSM system signal strength
Dial key
Make/answer a call
Show all the call log in standby mode
Profiles
Missed call notification
0~9 keys
Input numbers or characters
Long pressing ( * ) can input
“ + ”, “W”, “P”Not numeral input
method, press 0 to input space
in the edit screen; long press 1
can input common symbols
New message
Note:
Power indicator
1. Please make sure the mobile phone battery cover, battery
cover screw, screw, earphone and USB plugs are well sealed.
So that the mobile phone can be waterproof and dust proof.
Alarm
Supports?
ICON
2. Insert SIM or Micro-SD card
Insert the SIM card as shown. Push the Mircro-SD slot cover
to the left, until the cover bounces up. Insert the Micro-SD
card into the slot.
Keys name
Basic info
Feature
ICON
Keys definition
( # ) key
Press ( # ) to change input method
in edit screen
( * ) key
Press ( * ) key to display the symbols
window in edit screen
Up and
down key
Up and down key
Left and
right keys
Left and right key
Back key
Back to the last screen
End key
End a call
Power off/on the mobile phone
with long press
Back to the standby screen
SIM /Micro-SD installation
1. Take out the battery
Power off the phone and turn the battery cover screws until
the battery cover bounces up. Remove the battery cover to
access the battery.
2.While copying files in USB mode, please do not remove
the USB cable directly. Please exit the USB mode first,
then remove the USB cable to avoid missing data.
Function Menu
Add contact: add contacts to SIM1, SIM2, or
mobile phone.
Phonebook
Time and date
Options
Language
Phonebook settings
Pref. input method
Settings
memory storage:
SIM
card and
mobile phone memory stauts.
Phone settings
Search: search contacts
Display: Wallpaper,
auto-lock, boot animation
and shutdown animation
Dedicated keys
Multimedia
Video Recorder: switch to camera,
camera settings, video settings,
storage location, restore defaults
Video Player: Play, send, rename,
delete, store location
Music player
Airplane mode
New message: send to, input method,
advanced, save
Other settings
Messaging
Network settings
Restore settings: input password,
recovery to factory settings.
Draft: view, send, edit, delete, delete all
Sent messages: view, sent, edit, delete,
delete all
Outbox: view, forward, delete, delete all
SMS settings: SIM1 settings, memory
storage, save sent messages,
preferred storage
File manager
Mobile phone:Open, New Folder, Rename,
Delete, Format
Play, Update Playlist,
Settings
preferred list,
automatically generate a list,
repeat, random,
background play,
lyrics display
UART settings
Inbox: view, reply, call, forward, delete,
advance, save to phonebook, use phone
number, contacts or links
Recording
New recording, list, set
Play, Rename, Delete, Use, Send
Note: The length of the recording time
depends on the size of the memory card
FM radio
Channel list, manual input,
auto search, settings, recording, file list
Memory card: needs to 32GB and under
Network services
Call history
View: call, send text message, add to
black list, edit before call, delete
Settings: missed calls, received calls,
SIM1 settings, advanced setting
(blacklist, auto call back, answer mode)
STK
SIM1 STK service
Please consult your local network service operator
for charges and specific settings.
SIM2 STK service
Alarm clock
Image viewer: view, send, use as,
rename, delete, delete all, storage,
image information.
SIM settings: dual SIM card, only
SIM1 or only SIM2
Copy:SIM1/SIM2 copy to mobile
phone memory; mobile phone
memory copy to SIM1/SIM2; mobile
phone memory copy to folder
Calendar:Jump to the specified date and
switch to today
Camera: Switch to video recorder, Photos,
Camera settings, Image settings,
Effect settings, Storage, Restore default
Profiles: General, Silent, Meeting, Outdoor,
Headset and Airplane Mode.
10
Flashlight: you can turn on or off the
flashlight (torch); in standby-mode
the “OK/confirm” button or “0” key can
turn on/off the flashlight
Toolbox
NOTE:
This device complies with Part 15 of the FCC
Rules [and with Industry Canada licence-exempt RSS
Adapter shall be installed near the equipment and shall
be easily accessible.
The product shall only be connected to a USB interface
of version USB2.0.
Use care with the earphone volume, it may be possible
to receive excessive sound pressure from earphones
and headphones which can cause hearing loss.
standard(s)].
Operation is subject to the following two conditions:
This device complies with part 15 of the FCC Rules.
Operation is subject to the condition that this device does not
cause harmful interference.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions
suivantes:
① l'appareil ne doit pas produire de brouillage, et
② l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
Calculator: supports four mixed operations,
simple operation, convenient and practical
Bluetooth
On / off, visibility on/off
(whether it can be searched), my device,
search for Bluetooth device, my device name.
Caution: risk of explosion if battery is replaced by an
incorrect type. Dispose used batteries according to the
instructions.
Advanced: Automatic connection, storage,
my Bluetooth address
The phone's normal operating temperature
is -10℃～+55℃ .In order to ensure the normal phone
functions, do not use this phone outside the temperature
range.
Specific Absorption Rate (CE SAR)
This symbol on your product, the battery and the
accessories means that these products must be
taken to collection points at the end of their life.
The SAR limit of Europe is 2.0 W/kg. The device has also
been tested against this SAR limit. The highest SAR value
reported under this standard during product certification for
use at the ear is 1.10W/kg and when properly worn on the
body is 1.69 W/kg. This device was tested for typical bodyworn operations with the back of the handset kept 5mm from
the body. The device complies with RF specifications when
the device used at 5mm form your body. The use of belt clips,
holsters and similar accessories should not contain metallic
components in its assembly. The use of accessories that do
not satisfy these requirements may not comply with RF
exposure requirements, and should be avoided.
11
Changes or modifications made to this equipment not
expressly approved by (manufacturer name) may void the
FCC authorization to operate this equipment.
NOTE:
Power Idea Technology(Shenzhen) Co., Limited
Address： 4 t h floor ,Languang Science&technology Building
A,Hi-Tech Park North, Nanshan,Shenzhen, P.R.C.
Postal code：518057
12
13
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference
by one or more of the following measures:
14
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
● Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
● Consult the dealer or an experienced radio/TV technician
for help.
●
●
Specific Absorption Rate (SAR) information:
This Mobile Phone meets the government's requirements
for exposure to radio waves. The guidelines are based on
standards that were developed by independent scientific
organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial
safety margin designed to assure the safety of all persons
regardless of age or health.
FCC/ISED RF Exposure Information and
Statement:
The SAR limit of FCC (ISED) is 1.6 W/kg averaged over
one gram of tissue. Device types: One Glass (FCC ID:
ZLE-RG129) has also been tested against this SAR limit.
The highest SAR value reported under this standard
during product certification for use at the ear is 1.39 W/kg
and when properly worn on the body is 1.44 W/kg. This
device was tested for typical body-worn operations with
the back of the handset kept 15mm from the body. To
maintain compliance with FCC RF exposure requirements,
use accessories that maintain a 15mm separation distance
between the user's body and the back of the handset. The
use of belt clips, holsters and similar accessories should
not contain metallic components in its assembly. The use
of accessories that do not satisfy these requirements may
not comply with FCC RF exposure requirements, and
should be avoided.
15

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Profile CMM Type                : Lino
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : IEC
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : HP
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)
Page Count                      : 2
Create Date                     : 2017:08:29 15:08:32+08:00
Modify Date                     : 2017:08:29 15:08:32+08:00
Producer                        : Corel PDF Engine Version 17.1.0.572
Author                          : Administrator
Creator                         : CorelDRAW X7
Title                           : rg129说明书(料号：24013101）V1.1 增加警告语.cdr

EXIF Metadata provided by EXIF.tools