Powerstick com ARIA-MINI-ARI Portable Bluetooth speaker User Manual aria mini instruction manual
Powerstick.com Inc. Portable Bluetooth speaker aria mini instruction manual
user manual
Charging Port
Aux Input
Previous Song
Hold: Volume Down
Pause/Play/Answer/
Hang up
Next Song
Hold: Volume Up
Product Features
• Bluetooth 5.0+EDR
• 30-feet Bluetooth connectivity range
• 5-watt speaker for rich, powerful playback
• Passive radiator for bass boost
• Easy access buttons for quick music control
• Built-in microphone to use as a speakerphone
• More than 6 hours of playtime
• Soft touch exterior for a luxurious feel
Using Speakerphone
Product Support
For more information:
www.powerstick.com
For technical support, email us at:
support@powerstick.com
Designed in Canada by POWERSTICK.COM.
Assembled in China.
Specifications
Product Number ECSL-803500
Product Dimensions 4.25” x 2.36“ x 1.1”
Product Weight 4.45 oz.
Communication Bluetooth 5.0
Bluetooth Range Up to 30 ft.
Playback Time 6 hours or more
Speaker Output 5-watts
Input +5V, 500mAh
Battery Capacity 600mAh
While your speaker is playing music and
you receive a phone call, you will hear
the ring through ARI. You can press the
play/pause button on ARI to pick up the
phone call. When you are done, press
the play/pause button again to hang up.
You can also pick up and hang up phone
calls using your smartphone.
Setting up your speaker
Charging your speaker
1. Flip the Power Switch on ARI to ‘On’. You will hear a startup notification. The
Indicator Light will begin flashing red and green. You are now in Pairing Mode.
2. Go to your phone/device Settings.
Find your Bluetooth settings. (Note: if you are
having trouble, please refer to your devices support manual.)
3. You should see ARI listed in the list of nearby Bluetooth devices. If you do
not see ARI, make sure that you are in Pairing Mode (Indicator Light will flash
red and green on ARI).
4. Tap on the device named ARI to pair by Bluetooth. Once paired, you will
hear a notification indicating a successful pairing and the Indicator Light will
flash green.
5. Go ahead and play your favorite tunes on ARI!
6. When you’re done enjoying your music, flip the Power Switch to ‘Off’.
(Note: to pair ARI with another device, you must first disconnect any devices currently
paired by either: 1) turning off the first devices Bluetooth, 2) forgetting ARI as a paired
device, or 3) not having the paired device within range.)
When your speaker is running low on battery, using the included charging
cable, insert the micro-USB end into the Charging Port of ARI and the larger
USB end into a USB power source (computer, USB charger, etc.)
iOS Android
or
Power Switch
ARIA MINI (ARI)
ultra-portable bluetooth speaker
Model Name: Aria Mini (Ari)
FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used
in portable exposure condition without restriction.