Powertech Co PT-462 Transmitter User Manual 462 user s manual

Powertech Industrial Co Ltd Transmitter 462 user s manual

users manual

Outdoor Motion-Sensing User’s Manual Introduction Using Your Outdoor Motion-Sensing is a convenient way to detect some body is walking across. The Outdoor Motion-Sensing Light adapter will turns lights on when motion is detected, and the transmitter will active and send on signal only 1.5 sec. The light will stay on for 1 or 10 minutes after all motion has stopped and the transmitter will active and send off signal only 1.5 sec. Motion Sensor Installation Screw the Socket Adapter into the empty light socket and then screw light bulb into Socket Adapter. Battery Installation 1. Remove battery cover from the bottom of the sensor housing by pushing open the sliding battery door. 2. Install one 9-Vlot alkaline battery into the battery compartment. Be sure the battery(+)and(-)terminals match (+)and(-) contacts on battery cap. 3. Replace battery cover. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANYRADIO OR TV INTERFERENCE CAUSED BYUNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE USER’SAUTHORITY TO OPERATE THE EQUIPMENT.

Navigation menu