Powertech Co R9P006 Wireless Home Appliance Remote Control Kit User Manual RF Good

Powertech Industrial Co Ltd Wireless Home Appliance Remote Control Kit RF Good

Users Manual

WirelessHome ApplianceRemote Control KitR9P-005R9P-006R9P-119R9P-402R9P-119R9P-402User’s ManualAll VersionsOperating Instruction - Outlet Adaptor1. Plug the outlet adaptor into a powered 125VAC wall outlet.2. Plug the fixture / appliances you wish to control into 1 outlet wall tap / wall tap plus or the remote outlet of the yard stake.3. Turn the mechanical power switch (electrical power switch is not applicable) of the fixture / appliance to the ON position.4. Use the remote control to turn ON/OFF the fixture/appliance (see the operating instruction – remote control in below).IMPORTANT: ● Outdoor use outlet adaptor is recommended plugged into a GFCI-protected outlet.● Outdoor use outlet adaptor is suitable for damp locations. Not for water immersion or for use where directly exposed to water.● Yard stake outlet adaptor should be installed above ground level so it will not fill up with water when raining or snowing. Always unplug and remove the devices from the yard stake when raining or snowing. Operating Instruction – Wireless Remote ControlIn open space, the remote control has a wireless range up to 100 feet* to control the outlet adaptor.*Actual range may vary depending on environment condition, interference and building materials.To turn ON and OFF the lighting fixture/appliance1. To turn ON the lighting fixture/appliance, press ON switch on the remote control. The red LED indicator on the remote control will flash and the lighting fixture/appliance on the outlet adaptor will turn ON.INTRODUCTIONTHANK YOU for purchasing Wireless Home Appliance Remote Control Kit, you can remotely control indoor or outdoor fixtures and appliances from up to 100ft away (in open space).Having your holiday lighting or appliances turned ON & OFF is just as easy as few clicks on the remote control. Our product can conveniently help to change your house into an easy home automation style.OPERATING INSTRUCTIONSNOTE: There are four types of Wireless Home Appliance Remote Control Kit available that best suits your needs. The remote control and outlet adaptor may vary depending on the kit model purchased.Indoor UseR9P-1171-OutletWall Tap withremote control1-OutletWall Tap Pluswith remotecontrol4-Outlets Yard Stake (2 always on / 2 remote outlets) with remote control1-Outlet Wall Tap + 1-Outlet Wall Tap Pluswith 4 key remote controlR9P-118 R9P-402 R9P-109Outdoor Use Indoor & Outdoor UseVersions V1.02Versions V1.01Service Center in USACompany’s name: Haowell Technology & Consulting, Inc.Address: 415 Cloverdale Ln. Walnut, CA 91789-2028phone no: 909-859-5150Fax no: 909-468-4660Contact person: Shannon ChangE-mail: Shannon@HaowellConsultants.com© Copyright 2010The information contained herein is subject to change without notice.This document contains proprietary information, which is protected by copyright. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent.February 2010Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:＊Reorient or relocate the receiving antenna.＊Increase the separation between the equipment and receiver.＊Connect the equipment into an outlet on a circuit different from that to which the receiver is needed.＊Consult the dealer or an experienced radio/TV technician for help.
2. To turn OFF the lighting fixture/appliance, press OFF switch on the remote control. The red LED indicator on the remote control will flash and the lighting fixture/appliance on the outlet adaptor will turn OFF.Replace battery in the remote controlOne A23 12V Alkaline battery is included and pre-installed in the remote control.Replace the battery when the red LED light on the remote control goes very dim or does not illuminate while operating.Remove the battery compartment cover on the back of the remote control, take out the old battery and insert one A23 12V Alkaline battery in the proper orientation, and re-install the battery compartment cover.Wall mount for remote control1. Select a spot within the wireless range to mount the supplied wall bracket for remote control.2. The ideal locations for wall mount are entrance of a room or location where remote control wall mount can be easily seen and accessed.3. Use adhesive tape or supplied screws to securely attach the supplied wall bracket to a wall.SPECIFICATIONSRemote Control1. Power on indicator2. Outlet Adaptor ON and OFF indicator - the red LED indicator will show when you turn ON the device, and disappear when you turn OFF the device OFF the device3. ON Switch4. OFF SwitchBattery TypeBattery LifePower on indicatorWireless RangeUse ONLY A23 12V Alkaline3-6 monthsRed LEDUp to 100ft (Open Space)4 Key Remote Control1. Power on indicator2. Outdoor use outlet adaptor ON and OFF indicator3. ON Switch for outdoor use outlet adaptor4. OFF Switch for outdoor use outlet adaptor5. Indoor use outlet adaptor ON and OFF indicator6. ON Switch for indoor use outlet adaptor7. OFF Switch for indoor use outlet adaptorBattery TypeBattery LifePower on indicatorWireless RangeUse ONLY A23 12V Alkaline3-6 monthsRed LEDUp to 100ft (Open Space)Outdoor Use - Wall Tap Plus1. Power on indicator2. Remote OutletIndoor Use - Wall Tap1. Power on indicator2. Remote OutletElectrical RatingResistive LoadRemote OutletPower on indicatorStand-by power15A / 125V, 60Hz1875W1Red LED<1WElectrical RatingResistive LoadRemote OutletPower on indicatorStand-by power13A / 125V, 60Hz1625W1Red LED<1WOutdoor Use – 4-outlet Yard Stake1. Power on indicator2. Remote outlets on both side3. Always On outlets on both sideElectrical RatingResistive LoadRemote OutletAlways On outletPower on indicatorStand-by power15A / 125V, 60Hz1875W22Red LED<1WVersions V1.04Versions V1.03Versions V1.06Versions V1.05   Model No. R9P005Model No. R9P006Model No. R9P401R0Model No. R9P115R0Model No. R9P116R0This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.

Navigation menu