Powertech Co WSDB750GN WiFi-MCU Module User Manual Rev 01 160728
Powertech Industrial Co Ltd WiFi-MCU Module Rev 01 160728
User Manual-Rev.01(160728)
AMPAK WSDB-750GN_A Wi-Fi 802.11b/g/n+MCU Module User’s Manual Date Revision Content Version 2016/6/30 -Preliminary 0.0 AMPAK Technology Inc. Information www.ampak.com.tw Proprietary & Confidential 1. Introduction AMPAK Technology likes to announce a low-cost and low-power consumption module which has Wi-Fi 802.11b/g/n functionalities. The highly integrated WSDB-750GN module makes the possibilities of web browsing, all types of battery powered device. With seamless roaming capabilities and advanced security, WSDB-750GN can also interact with different vendors’ 802.11b/g/n Access Points in the wireless LAN. The wireless module complies with IEEE 802.11 b/g/n standard and it can achieve up to a speed of 72.2Mbps with single stream in 802.11n draft 7.0, 54Mbps as specified in IEEE 802.11g, or 11Mbps for IEEE 802.11b to connect to the wireless LAN. This compact module is a total solution for a combination of Wi-Fi 802.11b/g/n technologies with Microcontroller Processor. The module is specifically developed for embedded system devices. AMPAK Technology Inc. Information www.ampak.com.tw Proprietary & Confidential 2.General Specification 2.1 General Specification Model Name WSDB-750GN_A Product Description Wi-Fi 802.11b/g/n + MCU Module Dimension 16 mm x 32 mm x 3.1mm 0.5mm Module Interface SPI/JTAG/UART/USB/I2C/I2S Operating temperature -20°C to 70°C Storage temperature -40°C to 85°C Humidity Operating Humidity 10% to 95% Non-Condensing 2.2 Voltages 2.2.1 Absolute Maximum Ratings Symbol Description Min. Max. VDD_3V3 Power supply for SIP Module -0.4 3.7 Unit 2.2.2 Recommended Operating Ratings Symbol Min. Typ. Max. VDD_3V3 3.0 3.3 AMPAK Technology Inc. Information www.ampak.com.tw Proprietary & Confidential 3.6 Unit 3.WiFi RF Specification 3.1 RF Specification Conditions : VDD=3.3V ; Temp:25°C Feature Description WLAN Standard IEEE 802.11b/g/n, WiFi compliant. Not support 40MHz bandwidth. Frequency Range 2400 MHz ~ 2483.5 MHz (2.4 GHz ISM Band) Number of Channels 2.4GHz:Ch1 ~ Ch11 Modulation 802.11b : CCK, DQPSK, DBPSK 802.11 g/n : OFDM /64-QAM,16-QAM, QPSK, BPSK 802.11b /11Mbps : 15 dBm , typical @ EVM -9dB Output Power 802.11g /54Mbps : 13 dBm , typical @ EVM -25dB 802.11n /65Mbps : 12 dBm , typical @ EVM -28dB MCS=0 PER @ -85dBm, typical MCS=1 PER @ -84dBm, typical MCS=2 PER @ -82dBm, typical MCS=3 PER @ -80dBm, typical MCS=4 PER @ -77Bm, typical MCS=5 PER @ -73 dBm, typical MCS=6 PER @ -71 dBm, typical MCS=7 PER @ -69 dBm, typical 6Mbps PER @ -86Bm, typical 9Mbps PER @ -85dBm, typical 12Mbps PER @ -85dBm, typical Receive Sensitivity (11g) @10% PER 18Mbps PER @ -83dBm, typical 24Mbps PER @ -81dBm, typical 36Mbps PER @ -78Bm, typical 48Mbps PER @ -73dBm, typical 54Mbps PER @ -72dBm, typical 1Mbps PER @ -90dBm, typical 2Mbps PER @ -89Bm, typical 5.5Mbps PER @ -88 dBm, typical Receive Sensitivity (11n,20MHz) @10% PER Receive Sensitivity (11b) @8% PER AMPAK Technology Inc. Information www.ampak.com.tw Proprietary & Confidential - 11Mbps PER @ -85 dBm, typical 802.11b : 1, 2, 5.5, 11Mbps Data Rate 802.11g : 6, 9, 12, 18, 24, 36, 48, 54Mbps Data Rate (20MHz ,Long GI,800ns) 802.11n: 6.5, 13, 19.5, 26, 39, 52, 58.5, 65Mbps Data Rate (20MHz ,short GI,400ns) 802.11n : 7.2, 14.4, 21.7, 28.9, 43.3, 57.8, 65,72.2Mbps Maximum Input Level Antenna Reference AMPAK Technology Inc. Information 802.11b : -10 dBm 802.11g/n : -20 dBm Internal Printed ANT :Small antennas with 0~2 dBi peak gain www.ampak.com.tw Proprietary & Confidential 4.Warning 4.1 Federal Communication Commission Interference Statement To assure continued FCC compliance: 1. Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. 2. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Cet appareil radio est conforme au CNR-247d’Industrie Canada. L’utilisation de ce dispositif est autorisée seulement aux deux conditions suivantes : (1) il ne doit pas produire de brouillage, et (2) l’utilisateur du dispositif doit être prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. The final end product must be labeled in a visible area with the following: “Contains FCC ID: NHS- WSDB750GN”, “contains IC: 3653A- WSDB750GN”. The grantee's FCC ID can be used only when all FCC/ IC compliance requirements are met. AMPAK Technology Inc. Information www.ampak.com.tw Proprietary & Confidential 5. Pin Assignment AMPAK Technology Inc. Information www.ampak.com.tw Proprietary & Confidential No Name Type Description NC I/O No function PB2 I/O GPIO PIN NC I/O No function SPI1_MOSI/PA7 I/O SPI_MOSI NC I/O No function SPI1_SCK/PB3 I/O SPI_SCK SPI1_MISO/PB4 I/O SPI_MISO UART2_TX/PA2 I/O UART transmit output/Debug port PA1 I/O GPIO PIN MCU operating voltage input (power supply for RTC, external clock, 32 kHz oscillator and backup registers (through power switch) when VDD is not present.) 10 VBAT 11 NC I/O No function 12 UART2_RX/PA3 I/O UART receive input/Debug port 13 MICRO_RST_N I/O MCU Reset 14 WAKE_UP I/O Wake up 15 NC I/O No function 16 PC13 I/O GPIO PIN 17 I2C2_SCL/PB10 I/O I2C_SCL 18 I2C2_SDA/PB9 I/O I2C_SDA 19 PB12 I/O GPIO 20 GND - Ground 21 GND - Ground 22 NC I/O No function 23 NC I/O No function 24 NC I/O No function 25 SWD_TCK/PA14 I/O SWD_TCK 26 SWD_TMS/PA13 I/O SWD_TMS 27 PA12 I/O GPIO PIN 28 NC I/O No function AMPAK Technology Inc. Information www.ampak.com.tw Proprietary & Confidential 29 PA10 I/O GPIO PIN 30 PB6 I/O GPIO PIN 31 PB8 I/O GPIO PIN 32 NC I/O No function 33 PB13 I/O GPIO PIN 34 PA5 I/O GPIO PIN 35 PA11 I/O GPIO PIN 36 PB1 I/O GPIO PIN 37 PB0 I/O GPIO PIN 38 PA4 I/O GPIO PIN 39 VDD_3V3 Power supply input 40 VDD_3V3 Power supply input 41 ANT RF OUTPUT(option) AMPAK Technology Inc. Information www.ampak.com.tw Proprietary & Confidential 6.Dimensions 6.1 Physical Dimensions 40 Unit:mm AMPAK Technology Inc. Information www.ampak.com.tw Proprietary & Confidential 6.2 Mechanical details AMPAK Technology Inc. Information www.ampak.com.tw Proprietary & Confidential
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Page Mode : UseNone XMP Toolkit : 3.1-702 Create Date : 2016:07:28 09:48:05+08:00 Modify Date : 2016:07:28 09:55:55+08:00 Metadata Date : 2016:07:28 09:55:55+08:00 Producer : doPDF Ver 7.3 Build 382 (Windows 7 Business Edition (SP 1) - Version: 6.1.7601 (x64)) Format : application/pdf Document ID : uuid:4e0a9f46-60ef-4f40-88bc-d253cacfe9c0 Instance ID : uuid:d6002eca-01cd-4aec-8a72-e381c08fd3b9 Page Count : 11 Page Layout : OneColumnEXIF Metadata provided by EXIF.tools