Powervision Tech PRABS10 PowerRay Base Station User Manual
Powervision Tech Inc. PowerRay Base Station Users Manual
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3402345 |
| Application ID | us38WRC5AJ/bnlpWrOBeXA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 78.71kB (983933 bits) |
| Date Submitted | 2017-05-25 00:00:00 |
| Date Available | 2017-05-26 00:00:00 |
| Creation Date | 2017-05-25 09:21:39 |
| Producing Software | Acrobat Distiller 10.1.2 (Windows) |
| Document Lastmod | 2017-05-25 09:21:39 |
| Document Title | Users Manual |
| Document Creator | Adobe Illustrator CC 2015 (Windows) |
| Document Author: | wxh |
PVW1忍éćĺďźV2.6)EN.pdf 1 2017/5/24 16:35:41 CM MY PowerRay Quick Start Guide CY CMY PowerVision PVW1忍éćĺďźV2.6)EN.pdf 2 2017/5/24 16:35:41 PowerRay Diving preparation Diving and safety CM MY CY CMY PowerRay Introduction 1-4 Check the battery and Charging PowerRay Vehicle Check the battery Base Station Charging Remote controller 5-6 Prepare PowerRay 11-15 Diving and shooting 23-26 Remote controller for diving and Image capture 16-17 App control for diving and Image capture 01 02 03 Fish finder 7-9 PowerSeeker Bait drop Download app and watch 10 PowerRay tutorial videos Prepare remote controller 18 Prepare App 19-20 Prepare VR 21-22 Finding fish 27 Diving safety 28 PVW1忍éćĺďźV2.6)EN.pdf 3 2017/5/24 16:35:41 CM MY CY CMY PowerRay Introduction PVW1忍éćĺďźV2.6)EN.pdf 4 2017/5/24 16:35:41 PowerRay Introduction PowerRay Vehicle:PRA10 CM PowerRay can dive as deep as 98 feet underwater in freshwater or saltwater. You can set up fixed direction MY and fixed depth to swim PowerRay. It can be used for underwater photography, videography,fish detecting, CY CMY and fish luringÎ. Users can operate PowerRay through VR GoggleÎ, transmitter, and app to stream real time video. Itâs integrated 4K UHD camera provides 12 million pixels for underwater photography and videography. ÎOnly PowerRay Angler/Wizard has fish finder and bait drop. ÎOnly PowerRay Wizard has VR google. 01 PVW1忍éćĺďźV2.6)EN.pdf 5 2017/5/24 16:35:41 LED lights 4K UHD Camera Precision bait drop Place for PowerSeeker Vertical motor CM MY CY Charing port LED tail light CMY Horizontal motor 02 PVW1忍éćĺďźV2.6)EN.pdf 6 2017/5/24 16:35:41 PowerRay Introduction:PRABS10 Base station CM Base station connects to the PowerRay vehicle through the cable. Remote controller, cell phone and VR MY goggle can connect to the base station and control the PowerRay, camera and receive live feed. CY The battery inside is 3000mAh and can work for up to 3 hours. Users can check the battery level through CMY the battery indicator. Base station has a rubber belt which helps prevent the unit from slipping into the water. 03 PVW1忍éćĺďźV2.6)EN.pdf 7 2017/5/24 16:35:41 Reset Power Switch Battery indicator Rubber belt WIFI indicator CM Rubber belt knob MY CY CMY Cable Cable/charging port 04 PVW1忍éćĺďźV2.6)EN.pdf 8 2017/5/24 16:35:41 Remote controller:PRASC10 PowerRayâs transmitter connects with the base station wirelessly. The functions include operating the CM vehicle, LED lighting adjustment, speed adjustment, underwater photography, underwater videography, MY precision remote bait drop, fixed the depth and more. Users can operate PowerRay easily through the CY remote controller. CMY The built-in rechargeable batteryâs capacity is 3000mAh and can operate continuously for up to 20 hours. Users can check the battery level through the battery indicator on the App. 05 PVW1忍éćĺďźV2.6)EN.pdf 9 2017/5/24 16:35:41 Speed switch Left joystick Bait drop release Camera/Fish finder button Depth maintenance /Manual Switch CM Right joystick Battery indicator MY CY CMY Right shoulder button Left shoulder button Right dial: front LED light adjuster Left dial Charging port Power Switch 06 PVW1忍éćĺďźV2.6)EN.pdf 10 2017/5/24 16:35:41 Fish finder PowerSeeker:PSE10 CM PowerSeeker can detect fish and underwater landscape up to 131 feet below PowerRay and sends real MY time images to the app. CY CMY The PowerSeeker is equipped with a fish luring light, which attracts fish to come closer. The PowerSeeker can be attached to the PowerRay or detached as a stand-alone fish finding device. Only PowerRay Angler/Wizard has PowerSeeker and bait drop. 07 PVW1忍éćĺďźV2.6)EN.pdf 11 2017/5/24 16:35:41 1PXFS4FFLFS Fish line position CM MY CY CMY Upper Part Charging port Middle part Fish Luring light Bottom part Only PowerRay Angler/Wizard has PowerSeeker and bait drop. 08 PVW1忍éćĺďźV2.6)EN.pdf 12 2017/5/24 16:35:41 Fish finder device CM MY Bait drop Please put fish line on the hook, and operate the PowerRay to drop the bait through Remote controller or on Vision+. CY CMY Only PowerRay Angler/Wizard has fish finder and bait drop. 09 PVW1忍éćĺďźV2.6)EN.pdf 13 2017/5/24 16:35:41 Download app and watch PowerRay tutorial videos Download app and watch PowerRay tutorial videos Please scan the QR code on the right side, or search Vision+ on Google Play/APP Store to download the Vision+ App. CM MY CY CMY âĽăâź Europe 10 North America PVW1忍éćĺďźV2.6)EN.pdf 14 2017/5/24 16:35:41 CM MY CY CMY Diving Preparation PVW1忍éćĺďźV2.6)EN.pdf 15 2017/5/24 16:35:42 Check the battery and charging Battery level of vehicle PowerRay vehicle battery level is available from â Vision+â APP interface. CM MY CY CMY 11 PVW1忍éćĺďźV2.6)EN.pdf 16 2017/5/24 16:35:42 Battery level of base station check battery indicator CM MY CY Green:above 60% CMY 12 Yellow:60%~20% Red:below 20% PVW1忍éćĺďźV2.6)EN.pdf 17 2017/5/24 16:35:42 Battery level of fish finder The fish finder will automatically turn on when the charging port touches the water. It will turn off 1 minute after leaving the water. You can read the battery level through Vision+ App. CM Battery level of remote controller MY CY Check the battery indicator CMY Green:above 60% 13 Yellow:60%~20% Red:below 20% PVW1忍éćĺďźV2.6)EN.pdf 18 2017/5/24 16:35:42 Charging The PowerRay adaptor can charge the PowerRay, transmitter, and the base station at the same time. CM MY CY CMY 14 PVW1忍éćĺďźV2.6)EN.pdf 19 2017/5/24 16:35:42 CM MY CY CMY 1 Remote controller can take~3.5 hours to be fully charged Base Station can take~2.5 hours to be fully charged 15 3 PowerRay vehicle can take~2.5 hours to be fully charged PVW1忍éćĺďźV2.6)EN.pdf 20 2017/5/24 16:35:42 Prepare PowerRay CM MY CY CMY 1.Turn on the base station 2.Plug the cable into base station. 3.Open the vehicle charging by pressing the power port protector.(make sure switch for 3 seconds. this is always 100% dry while doing this) 16 PVW1忍éćĺďźV2.6)EN.pdf 21 2017/5/24 16:35:42 WIFI 13"@4UBUJPO@YYY CM MY CY CMY 4.Plug the other side of the cable into PowerRay 5.Use a cell phone or other mobile device and make sure you have a tight connection.(make to turn on the WiFi, connect to sure this is always 100% dry while doing this) âPRA_Station_xxxâ, (default password is 1234567890). 17 PVW1忍éćĺďźV2.6)EN.pdf 22 2017/5/24 16:35:42 Prepare the remote controller Cell phones or tablets can be mounted on the brackets of the remote controller. Turn on the remote controller. It will start searching for the base station. The remote controller light will turn green when it is connected.You will hear a notification sound. CM MY CY CMY 18 PVW1忍éćĺďźV2.6)EN.pdf 23 2017/5/24 16:35:42 Prepare the APP Make sure you connect to the WiFi. Launch the âVision+â App and switch to PowerRay. When it shows âdevice connectedâ, click on âStart Divingâ CM MY CY Device is connedted Start diving CMY Device is connedted 19 PVW1忍éćĺďźV2.6)EN.pdf 24 2017/5/24 16:35:43 Base station battery Vehicle battery Base station signal Connection status Master/slave mode CM Album VR mode switch Camera parameters Sonar mode switch Switch to photo or videos Take photo or videos Bait drop MY CY Prompt message Right joystick Left joystick CMY Water Depth Depth maintenance switch Front light control Speed mode âVision+â APP Description 20 PVW1忍éćĺďźV2.6)EN.pdf 25 2017/5/24 16:35:43 Prepare VR Switch the to VR mode in the app and put the phone into VR glasses. 1.Put phone into bracket and push back the bottom cover. CM MY CY push back the bottom cover CMY Only PowerRay Wizard has this device. 21 PVW1忍éćĺďźV2.6)EN.pdf 26 2017/5/24 16:35:43 2.Insert the bracket into VR goggle CM MY CY CMY 3. VR goggle head gesture functionďť Head gesture function activationďťPress down the left shoulder button on the controller to enable this function. You can move the PowerRay through head gestures. Release the left shoulder button to disable this function. Only PowerRay Wizard has this device. 22 PVW1忍éćĺďźV2.6)EN.pdf 27 2017/5/24 16:35:43 CM MY Diving and safety CY CMY 01 PVW1忍éćĺďźV2.6)EN.pdf 28 2017/5/24 16:35:43 Diving and shooting To prevent the user from spinning the propellers accidently outside the water, user needs to unlock the PowerRay to enable the motors Locking & Unlocking PowerRay -Lock: dial the left finger wheel to the right and press CM camera/fish finder button for 1 second until it vibrates. MY CY CMY -Unlock: dial the left finger wheel to the left and press camera/fish finder button for 1 second until it vibrates. 23 PVW1忍éćĺďźV2.6)EN.pdf 29 2017/5/24 16:35:43 Modes - The remote controllerâs default mode is âMODE4â. PowerRay has 4 modes to control it. Users can choose the mode with their behavior through App. Left joystick Right joystick Left joystick Right joystick Forward Ascend Ascend Forward CM Rotate to left Rotate to left Rotate to right Backward Descend Rotate to right MODE1 MY Backward Descend MODE2 CY Left joystick Right joystick Left joystick Right joystick CMY Forward Ascend Ascend Forward Rotate to right Rotate to left Backward Rotate to left Descend Descend MODE3 Backward MODE4 24 Rotate to right PVW1忍éćĺďźV2.6)EN.pdf 30 2017/5/24 16:35:43 Diving and shooting with standard controller You can change the speed of the PowerRay by toggling the switch between the two joysticks. (High, Medium, and Low speed) CM MY CY CMY 25 PVW1忍éćĺďźV2.6)EN.pdf 31 2017/5/24 16:35:43 Diving and shooting with App Default mode is âMODE4â 1. Unlock and choose the speed mode: You can click the top right corner button and slide to the right to unlock the PowerRay. You can choose the speed CM mode at the bottom of the APP interface. MY CY CMY 2. Default mode is âMODE4â 3. Lock: To prevent accident from happening, you need to lock the PowerRay. You can click the top right corner icon and slide to the right to lock it. 26 PVW1忍éćĺďźV2.6)EN.pdf 32 2017/5/24 16:35:44 Finding fish 1.Fish finder needs to be installed on the PowerRay before plugging in the Power cable. 2.After turning on the PowerRay, the fish finder will start to work after it enters in the water. 3.Fish finder will automatically connect to the PowerRay. You can connect to the fish finder Wi-Fi called âPSE_xxxâ. No password needed. 4.You can click PowerRay APP to switch to Fish finder interface. CM MY CY CMY Note: You are able to adjust the display parameters to fish detection notification. change the display effect. You can also turn on/off the 27 PVW1忍éćĺďźV2.6)EN.pdf 33 2017/5/24 16:35:44 Diving in a open water Within visual range Depth less than 30m Turn off the base station to save battery Avoid waterweed Fix the base station before use NEVER drop the base station into water Do NOT drag the cable with strong force Do NOT throw into water Avoid Hot environment Do NOT spin motors in the Air outside of the water Do NOT touch spinning propellers CM MY CY CMY 28 PVW1忍éćĺďźV2.6)EN.pdf 34 2017/5/24 16:35:44 CM MY CY CMY FCC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. PowerRay Vehicle/Base Station/PowerSeeker The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. PowerRay Standard Controller The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body.PowerRay Standard Controller:The highest measured body SAR value(1g) is:0.070W/kg. 29 PVW1忍éćĺďźV2.6)EN.pdf 35 2017/5/24 16:35:44 CM MY CY CMY IC This device complies with Industry Canadaâs licence-exempt RSSs. Operation is subject to the following two conditions:(1) This device may not cause interference; and(2) This device must accept any interference, including interference that may cause undesired operation of the device. Cetappareilestconforme aux CNR exempts de licenced'Industrie Canada. Le fonctionnementestsoumis aux deux conditions suivantes:(1) Ce dispositif ne peut causer des interfĂŠrences; et(2) Cetappareildoit accepter touteinterfĂŠrence, y compris les interfĂŠrences qui peuvent causer un mauvaisfonctionnement de l'appareil. PowerRay Vehicle/Base Station/PowerSeeker The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. CetĂŠquipementestconforme aux limitesdâexposition aux rayonnements ISED ĂŠtablies pour un environnement non contrĂ´lĂŠ. LâutilisateurĂżnaldoitsuivre les instructions spĂŠciĂżques pour satisfaire les normes. CetĂŠmetteur ne doit pas ĂŞtre co-implantĂŠoufonctionnerenconjonction avec touteautreantenneoutransmetteur. CetĂŠquipementestconforme Canada limitesd'exposition aux radiations dans un environnement non contrĂ´lĂŠ. CetĂŠquipementdoitĂŞtreinstallĂŠ et utilisĂŠ Ă distance minimum de 20cm entre le radiateur et votre corps. PowerRay Standard Controller The portable device is designed to meet the requirements for exposure to radio waves established by the ISED. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body.PowerRay Standard Controller:The highest measured body SAR value(1g) is:0.070W/kg. Le dispositifportatifestconçu pour rĂŠpondre aux exigencesdâexposition aux ondes radio ĂŠtablie par le dĂŠveloppementĂŠnergĂŠtique DURABLE. Cesexigences un SAR limite de 1,6 W/kg enmoyenne pour un gramme de tissu. La valeur SAR la plus ĂŠlevĂŠesignalĂŠeenvertu de cettenormelors de la certiĂżcation de produit Ă utiliserlorsquâilestcorrectementportĂŠ sur le corps. CE Operation frequency: 2400 to 2483.5MHz; Maximum output power: 100mW for EU.Hereby, [Powervision Tech Inc.] declares that the radio equipment type [PowerRay] is in compliance with Directive 2014/53/EU.The full text of the EU declaration of conformity is available at the following internet address:www.powervision.me. 30 PVW1忍éćĺďźV2.6)EN.pdf 36 2017/5/24 16:35:44 CM MY CY CMY PowerVision www.powervision.me
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : wxh Create Date : 2017:05:25 09:21:39+08:00 Modify Date : 2017:05:25 09:21:39+08:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Title : PVW1快速指南（V2.6)EN Creator : wxh Metadata Date : 2017:05:24 16:35:47+08:00 Creator Tool : Adobe Illustrator CC 2015 (Windows) Thumbnail Width : 232 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 15394 bytes, use -b option to extract) Instance ID : uuid:b73c9af8-50f3-42d6-848d-42d246775d87 Document ID : xmp.did:6575aef2-3230-3049-9bbc-50881060539d Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:cfcaa516-7acf-474c-9416-00ded666b4c3 Derived From Document ID : xmp.did:1142c793-ac26-f04d-842d-442db105b1c2 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:70eb2edd-fe2f-3a4f-b57b-de3e36d2cae2, xmp.iid:6575aef2-3230-3049-9bbc-50881060539d History When : 2017:04:27 16:22:57+08:00, 2017:05:24 16:35:33+08:00 History Software Agent : Adobe Illustrator CC 2017 (Windows), Adobe Illustrator CC 2015 (Windows) History Changed : /, / Manifest Link Form : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference Manifest Reference File Path : C:\Users\top\Desktop\声呐(基础设置).png, C:\Users\top\Desktop\声呐(基础设置).png, F:\PowerRay\平面设计\2017.5.2 说明书 英文\声呐(基础设置).png, F:\PowerRay\平面设计\2017.5.2 说明书 英文\水下视角优化版（控制）8768.png, F:\PowerRay\平面设计\2017.5.2 说明书 英文\水下视角优化版解锁.png, WechatIMG3.jpeg, F:\PowerRay\平面设计\2017.5.2 说明书 英文\水下视角优化版（控制）32545.png, F:\PowerRay\平面设计\2017.5.2 说明书 英文\首页初始（未激活状态）.png, F:\PowerRay\平面设计\2017.5.2 说明书 英文\水下视角优化版（控制）.png Manifest Reference Document ID : xmp.did:1DD5400E2FC511E7A965E9906D9A411F, xmp.did:1DD5400E2FC511E7A965E9906D9A411F Manifest Reference Instance ID : xmp.iid:1DD5400D2FC511E7A965E9906D9A411F, xmp.iid:1DD5400D2FC511E7A965E9906D9A411F Ingredients File Path : C:\Users\top\Desktop\声呐(基础设置).png, C:\Users\top\Desktop\声呐(基础设置).png, F:\PowerRay\平面设计\2017.5.2 说明书 英文\声呐(基础设置).png, F:\PowerRay\平面设计\2017.5.2 说明书 英文\水下视角优化版（控制）8768.png, F:\PowerRay\平面设计\2017.5.2 说明书 英文\水下视角优化版解锁.png, WechatIMG3.jpeg, F:\PowerRay\平面设计\2017.5.2 说明书 英文\水下视角优化版（控制）32545.png, F:\PowerRay\平面设计\2017.5.2 说明书 英文\首页初始（未激活状态）.png, F:\PowerRay\平面设计\2017.5.2 说明书 英文\水下视角优化版（控制）.png Ingredients Document ID : xmp.did:1DD5400E2FC511E7A965E9906D9A411F, xmp.did:1DD5400E2FC511E7A965E9906D9A411F Ingredients Instance ID : xmp.iid:1DD5400D2FC511E7A965E9906D9A411F, xmp.iid:1DD5400D2FC511E7A965E9906D9A411F Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : True N Pages : 1 Max Page Size W : 11.600000 Max Page Size H : 7.999942 Max Page Size Unit : Centimeters Font Name : ArialMT, AvenirLT-Roman, AvenirLT-Heavy, AvenirLT-Light, AvenirLT-Book, AvenirLT-Medium, AvenirLT-Black, SourceHanSansCN-Bold, AdobeSongStd-Light, SourceHanSansCN-ExtraLight, SourceHanSansCN-Light Font Family : Arial, Avenir LT 55 Roman, Avenir LT 55 Roman, Avenir LT 35 Light, Avenir LT 45 Book, Avenir LT 65 Medium, Avenir LT 65 Medium, 思源黑体 CN, Adobe 宋体 Std, 思源黑体 CN, 思源黑体 CN Font Face : Regular, Regular, Bold, Regular, Regular, Regular, Bold, Bold, L, ExtraLight, Light Font Type : Open Type, TrueType, TrueType, TrueType, TrueType, TrueType, TrueType, Open Type, Open Type, Open Type, Open Type Font Version : Version 6.90, Version 6.1; 2002, Version 6.1; 2002, Version 6.1; 2002, Version 6.1; 2002, Version 6.1; 2002, Version 6.1; 2002, Version 1.000;PS 1;hotconv 1.0.78;makeotf.lib2.5.61930, Version 5.017;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168, Version 1.000;PS 1;hotconv 1.0.78;makeotf.lib2.5.61930, Version 1.000;PS 1;hotconv 1.0.78;makeotf.lib2.5.61930 Font Composite : False, False, False, False, False, False, False, False, False, False, False Font File Name : arial.ttf, Avenir LT 55 Roman.ttf, Avenir LT 85 Heavy.ttf, Avenir LT 35 Light.ttf, Avenir LT 45 Book.ttf, Avenir LT 65 Medium.ttf, Avenir LT 95 Black.ttf, 思源黑体-Bold.otf, AdobeSongStd-Light.otf, 思源黑体-ExtraLight.otf, 思源黑体-Light.otf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Group Name : 明亮 Swatch Groups Group Type : 0 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000000 Swatch Groups Colorants Magenta : 90.000000 Swatch Groups Colorants Yellow : 0.003100 Swatch Groups Colorants Black : 0.003100 Producer : Acrobat Distiller 10.1.2 (Windows) Creator Version : 21.0.0 Page Count : 36EXIF Metadata provided by EXIF.tools