Powerwave Technologies 5JS0069 Single Channel 1900 MHz Amplifier Module User Manual Cover Page1
Powerwave Technologies Inc Single Channel 1900 MHz Amplifier Module Cover Page1
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 467801 |
| Application ID | ScBK3lLiNk1wjWFZmaWoEQ== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 48.31kB (603867 bits) |
| Date Submitted | 2004-09-10 00:00:00 |
| Date Available | 2004-09-09 00:00:00 |
| Creation Date | 2004-08-13 22:18:33 |
| Producing Software | Acrobat Distiller 5.0.5 (Windows) |
| Document Lastmod | 2004-08-13 15:32:23 |
| Document Title | Microsoft Word - Cover Page1.doc |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | jdale |
1850-1910/1930-1990 MHz Installation and Operation Manual Power Amplifier Radio Module (PARM), 1850-1910/1930-1990 MHz, 30-Watt 044-05171 Rev. A August 2004 Installation & Service Manual © 2004 Powerwave Technologies Incorporated. All rights reserved. Powerwave Technologies, and the Powerwave logo are registered trademarks. Powerwave Technologies, Inc. reserves the right to make changes to the documentation and equipment, including but not limited to component substitution and circuitry changes. Changes that impact this manual may subsequently be incorporated in a later revision of this manual. This Powerwave product is designed to operate within the Normal Operating (typical operating) ranges or conditions specified in this document. Operation of this equipment beyond the specified ranges in this document may cause (1) spurious emissions that violate regulatory requirements; (2) the equipment to be automatically removed from service when maximum thresholds are exceeded; or (3) the equipment to not perform in accordance with its specifications. It is the Operator's responsibility to ensure this equipment is properly installed and operated within Powerwave operating specifications to obtain proper performance from the equipment and to comply with regulatory requirements. August 2004 Powerwave Technologies, Inc. 1801 E. St. Andrew Place Santa Ana, CA 92705 Tel: (714) 466-1000 (888) 797-9283 Fax: (714) 466-5800 Web Site: www.powerwave.com Copyright Powerwave Technologies, Inc., August 2004. All rights reserved 044-05171 Rev. A ii April 2004 Installation & Service Manual Chapter 1 General Description 1-1 Introduction This manual contains general information, installation procedures, and specifications for the operation and use of the Power Amplifier Radio Module (PARM). The manual is organized as follows: Chapter 1 Chapter 2 General Description with Specifications Installation and Operation 1-2 General Description The PARM is designed as an integrated subassembly unit mounted in a Radio Module (RM) closed metal housing fitted with a heat sink and connected by RF coaxial and DC connectors. The PARM use a common DC/DC converter for operating power. Up to three PARM can be mounted in one RM. The PARM’s basic function is amplifying two 60 MHz band modulated RF input signals (18501910 MHz and 1930-1990 MHz) from the TX driver subassembly, up to the level of the whole transmitter, as defined in GSM 05.05, class 1 (20 watts minimum and 40 watts maximum). The main characteristics of the PARM are: • GMSK compliant • 8-PSK compliant The PARM is rated for an average output power of 30 watts with an EDGE signal and 30 watts with a GMSK signal. The electrical specifications are also designed to be in compliance with the requirements of GSM 05.05. 1-3 Specifications Specifications for the PARM are listed and described in table 1-1. Table 1-1 PARM Operating Specifications Frequency Range Total Typical / Maximum Input Power Average Output Power RF Gain Duty Cycle DC Operating Voltage DC Operating Voltage Range Operating Temperature Storage Temperature Operating Humidity Storage Humidity Alarms RF Input Connector RF Output Connector DC Input Connector Power Consumption Dimensions 1850 - 1910 MHz (60 MHz Bandwidth) 1930 - 1990 MHz (60 MHz Bandwidth) -15.7 - +4.8 / +5.8 dBm 30 Watts (44.8 dBm) 39 - 48 dB Continuous 27 ±2% VDC (26.46 to 27.54 VDC) 25 to 29.5 VDC -5 ºC to +60 ºC -40 ºC to +85 ºC 5 % to 95 % Relative Humidity (noncondensing) 0 % to 100 % Relative Humidity (noncondensing) See Chapter 2 MCX female, gold plated body and core QN-type female Samtec FHP-04-01-T-S, 8-pin 94.5 Watts 3.75” High, .75” Wide, 6.75” Deep Copyright Powerwave Technologies, Inc., August 2003. All rights reserved 044-05171 Rev. A 1-1 August 2003 Installation & Service Manual Chapter 2 Installation and Operation 2-1 Introduction This section contains operating instructions for the Power Amplifier Radio Module (PARM). 2-2 Installation The PARM module is designed to be directly installed into the radio module. 2-2.1 Alarms Interface Connector Pin Number 10 11 12 13 14 15 16 17 18 19 20 Signal PA_VER_RADO PA_VER_RAD1 PA_VER_RAD2 PA_VER_RAD3 PA_VER_RAD4 GND GND PA_ID_LDMOS0 PA_VG_LDMOS0 GND GND PA_ID_DRIVER PA_ALA_TPTR_OUT GND GND PA_OFF PA_VG_LDMOS1 GND PA_ID_LDMOS1 PA_P_OUT Comment From PARM TO LRM From PARM TO LRM From PARM TO LRM From PARM TO LRM From PARM TO LRM From PARM TO LRM From LRM TO PARM From PARM TO LRM From PARM TO LRM From LRM TO PARM From LRM TO PARM From PARM TO LRM From PARM TO LRM 2-2.2 Alarm Descriptions • High Temperature – A temperature monitor located inside the PARM indicates the alarm status if the temperature exceeds the defined threshold. • High Current - This alarm indicates when a high current is pending that could damage the PARM if the system continues to operate. Copyright Powerwave Technologies, Inc., August 2004. All rights reserved 044-05171 Rev. A 2-1 August 2004
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2004:08:13 22:18:33Z Modify Date : 2004:08:13 15:32:23-07:00 Page Count : 4 Creation Date : 2004:08:13 22:18:33Z Mod Date : 2004:08:13 15:32:23-07:00 Producer : Acrobat Distiller 5.0.5 (Windows) Author : jdale Metadata Date : 2004:08:13 15:32:23-07:00 Creator : jdale Title : Microsoft Word - Cover Page1.docEXIF Metadata provided by EXIF.tools