Powerwave Technologies 5JS0110 Multi-carrier RF Power Amplifier User Manual 044 05369 G3L 2129 140

Users Manual Cover Page

Powerwave Technologies, and the Powerwave logo are registered trademarks.

This Powerwave product is intended only for installation in a RESTRICTED ACCESS LOCATION and

this Powerwave product is designed to operate within the normal operating (typical operating) ranges

or conditions specified in this document. This equipment has been tested and found to comply with the

limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely to

cause harmful interference in which case the user will be required to correct the interference at his own

expense.Operation of this equipment beyond the specified ranges in this document may cause:

1. Spurious emissions that violate regulatory requirements.

2. The equipment to be automatically removed from service when maximum thresholds are exceeded.

3. The equipment to not perform in accordance with its specifications.

It is the operator’s responsibility to ensure this equipment is properly installed and operated within

Powerwave operating specifications, to obtain proper performance from the equipment, and to comply

with regulatory requirements.

For PERMANENTLY CONNECTED EQUIPMENT, a readily accessible disconnect device shall be

incorporated in the building permanent wiring.