Practecol SSRC02 Wireless Hand Held Transmitter User Manual SSRC02 Instruction manual

Download:
Mirror Download [FCC.gov]
Document ID	1938702
Application ID	WMpyWAjOg6r8t0825j1Lpg==
Document Description	YBO-SSRC02_User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	7.08kB (88491 bits)
Date Submitted	2013-04-15 00:00:00
Date Available	2013-04-16 00:00:00
Creation Date	2013-04-08 09:31:39
Producing Software	GPL Ghostscript 8.64
Document Lastmod	2013-04-08 09:31:39
Document Title	SSRC02 Instruction manual
Document Creator	PDFCreator Version 0.9.8
Document Author:	jacksonh

EASY INSTALLATION:
1. Plug the power strip into a 3-wire indoor outlet.
2. Green indicator light is lit when the power strip is powered on and have proper grounding.
BATTERY INFORMATION AND REPLACEMENT:
1. On the bottom of the remote use your finger to slide out the battery holder.
2. Remove the used battery and insert a new 23A 12V battery.
3. Slide the battery holder back inside so that it sets in place.
4. Dispose of old battery properly.
WARNING:
Keep batteries away from children and pets.
Follow the battery manufacturer’s safety and usage instructions.
• Remove battery if product is to be left unused for a long time.
• Clean the battery contacts prior to battery installation.
• Do not dispose of batteries in fire. Batteries may explode or leak.
Remote Control
1. Press: “ON” button on the transmitter, the power strip is power ON continuously.
2. Press “OFF” button on the transmitter, the power strip is power ON now.
3. Operate range: up to 80 feet.
CAUTION
• Risk of Fire.
• DO NOT PLUG IN MORE THAN THE RATED LOAD.
• This is a Radio Frequency (RF) Device. Therefore the range of the transmitter is affected by obstructions, walls and
other electronic devices.
ATTENTION: INSTRUCTIONS FOR PROPER USE
• USE WITHIN THE ELECTRICAL RATING MARKED ON THE PRODUCT
• RATED 125 VOLTS
• Inspect periodically
WARNING:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the
equipment.
Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment..
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Notice:
Functional Range may be adversely affected by one or more of the following factors:
Orientation of the transmitter or receiver, weather, radio frequency interference, low transmitter battery and obstructions
between the transmitter and receiver.
Green LED indicator
Transmitter
Power strip (receiver)

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 2
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : 9201b1d7-a247-11e2-0000-0a0bfd492944
Producer                        : GPL Ghostscript 8.64
Keywords                        : ()
Modify Date                     : 2013:04:08 09:31:39+08:00
Create Date                     : 2013:04:08 09:31:39+08:00
Creator Tool                    : \376\377\000P\000D\000F\000C\000r\000e\000a\000t\000o\000r\000 \000V\000e\000r\000s\000i\000o\000n\000 \0000\000.\0009\000.\0008
Document ID                     : 9201b1d7-a247-11e2-0000-0a0bfd492944
Format                          : application/pdf
Title                           : \376\377\000S\000S\000R\000C\0000\0002\000 \000I\000n\000s\000t\000r\000u\000c\000t\000i\000o\000n\000 \000m\000a\000n\000u\000a\000l
Creator                         : \376\377\000j\000a\000c\000k\000s\000o\000n\000h
Description                     : ()
Author                          : jacksonh
Subject                         : 

EXIF Metadata provided by EXIF.tools