Prastel S p A MPSTP2EB Garage Door Remote Control User Manual MPSTP2EB V0

Download:
Mirror Download [FCC.gov]
Document ID	76700
Application ID	kHKzZbtKRQpR4H41oQEPMA==
Document Description	INSTRUCTION MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	2.92kB (36454 bits)
Date Submitted	1999-12-17 00:00:00
Date Available	1999-12-22 00:00:00
Creation Date	1999-12-15 14:08:36
Producing Software	Acrobat Distiller 3.0 for Windows
Document Lastmod	0000-00-00 00:00:00
Document Title	Microsoft Word - MPSTP2EB_V0.doc
Document Creator	PSCRIPT.DRV versione 4.0

MPSTP2EB
ENGLISH
MPSTP2EB_V0.doc
CAUTION FOR THE USER
Any change or modification of the product is forbidden if not expressly
approved by the manufacturer
0. DESCRIPTION
MPSTP2EB is a radio transmitter used with radio receivers of the Multipass and Roll series. It has two
pushbuttons being capable to activate two different output channels on a radio receiver working with the same
code and the same operating frequency.
It works on 433.920 MHz frequency regulated by a SAW oscillator. It is provided with an integral antenna. It is not
possible to transmit continously with MPSTP2EB.
1. APPLICATIONS
It can be used in remote control applications as door opener and in control access applications.
2. TECHNICAL FEATURES
Transmission frequency
Type of code
No. Of channels
Power supply
Power consumption
Duration of transmission
Signalling devices
433.92 MHz (radio section) – 125 kHz (transponder section)
rolling code
2 (radio) + 1 (transponder)
6V (two 3 V lithium battery)
Negligible when not operating, 15mA for transmission
2 sec (radio transmission)
red LED
Member of:
Associated
ENGLISH
MPSTP2EB
MPSTP2EB_V0.doc
3. HOW TO PROCEED WHEN CHANGING THE BATTERY
HOW TO CHANGE THE BATTERIES:
•
•
•
•
FIG. 1
Loosen screw «A» as shown in Fig. 1.
Open the remote control.
Remove the batteries handling them as shown in Fig. 2.
Fit new batteries taking care of aligning polarity correctly (see
Fig. 4).
FIG. 2/1
FIG. 2
FIG. 4
LITHIUM BATTERY
3V
FCC ID: ON3MPSDT2
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Member of:
Associated

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 2
Create Date                     : 1999:12:15 14:08:36
Producer                        : Acrobat Distiller 3.0 for Windows
Creator                         : PSCRIPT.DRV versione 4.0
Title                           : Microsoft Word - MPSTP2EB_V0.doc

EXIF Metadata provided by EXIF.tools