Precision Squared Technology 9452A01 BLUETOOTH SLIM PAD User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1047289
Application ID	D8e+IMmo1XkszZX8v54i6g==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	32.06kB (400733 bits)
Date Submitted	2008-12-19 00:00:00
Date Available	2008-12-19 00:00:00
Creation Date	2008-12-01 06:11:01
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2008-12-18 12:32:27
Document Title	Users Manual

*** USER’S MANUAL ***
FCC ID：RAC9452A01
Operation Manual
1. Installation
1.1 System Requirements
Determine that your PC, notebook, tablet, „Handheld“ or similar is on the hardware side
already Bluetooth-enabled. In this connection this keyboard is then compatible to all systems
supporting the Bluetooth HID-profile correctly.
1.2 Preliminaries
Ensure that the accompanying Bluetooth driver software, which belongs to your used
Bluetooth component (integrated Bluetooth module respectively external Bluetooth dongle
receiver) is or was installed correctly on your PC. Please refer to the manual of the
accompanying Bluetooth component manufacturer.
For already embedded Bluetooth module
• If you computer (PC, notebook, tablet, „handheld“ or similar) was provided by manufacturer
with an integrated Bluetooth module, please use the included and preloaded Bluetooth
driver software. You do not need to install other Bluetooth driver software.
For later installed, external Bluetooth dongle receiver
• If your PC is running Windows XP (SP2) and Vista and the IC of your Bluetooth dongle
receiver is from manufacturer CSR, please use the included and preloaded Microsoft
Bluetooth driver software.
You do not need to install other Bluetooth driver software. If you do not like to use the
Microsoft Bluetooth driver software for any reason, you can install optionally Bluetooth
driver software Toshiba or BlueSoleil (from software manufacturer IVT).
• If your PC is running Windows 98 (SE), ME or 2000 and the IC of your Bluetooth dongle
receiver is from manufacturer CSR, please first install the Bluetooth driver software
Toshiba or BlueSoleil (IVT).
• If your PC is running Windows 98 (SE), ME, 2000, XP (SP2) and Vista and the IC of your
Bluetooth dongle receiver is from manufacturer ISSC (Integrated System Solution Corp.),
please first install the Bluetooth driver software BlueSoleil (IVT).
• If your PC is running Windows 98 (SE), ME, 2000, XP (SP2) and Vista and the IC of your
Bluetooth dongle receiver is from manufacturer Broadcomm, please first install the
Bluetooth driver software WIDCOMM.
Advice: Most of Bluetooth keyboards can not operate under BIOS or DOS environment due to
the Bluetooth dongle operated in the HCI (Host Controller Interface) mode only. A dual-mode
(HCI and HID – Human Interface Device) Bluetooth USB dongle enables the Bluetooth
keyboard to operate in BIOS and DOS environment.
1.3 Installation of keyboard
Ensure for the further procedure that the used Bluetooth driver software (as described under
1.2) was installed correctly on your PC.
1.3.1 Keyboard installation under Bluetooth driver software BlueSoleil
• Left-click the Bluetooth icon in the system tray area
of PC.
Fi
• Now opens the menu window of BlueSoleil software.
• After opening the menu turn the sliding switch back side of
the keyboard to ON position and afterwards press 1× the
Pairing button.
• On the front side of the keyboard
the Pairing-LED
should flash rapidly indicating the
pairing mode.
Fi
Fi
Fi
• Click now in the menu window on the globe for searching
all discoverable Bluetooth devices around your PC. When
your keyboard is identified, please double-click on the
keyboard icon with the left mouse key. After that click right
on the keyboard icon and choose Pair Device.
• You'll be prompted with a numeric password for
pairing between your PC and your keyboard. Please enter
exactly the same password on your Bluetooth keyboard
and confirm with OK.
• You will find a red tick in system tray.
Please click the keyboard icon by using the right button of
mouse, and tap
Fi
Connect ÆBluetooth Human Interface Device Service
Then you should be able to find a message Connected in status bar. Now you can use
this Bluetooth keyboard to input the data into your computer.
Advise:
Once the pairing procedure has been
Fi
carried out successfully, the computer
respectively the Bluetooth keyboard can be
turned on and off without repeating the
pairing procedure. They will connect
automatically again.
Fi
1.3.2 Keyboard installation under Bluetooth driver software WIDCOMM
Instructions below are based on WIDCOMM software version 1.4.2 running on Windows XP.
Follow the instructions which come with your particular Bluetooth adapter (dongle).
• Left-click the Bluetooth icon in the system tray of PC.
Fi
• Opens a menu window of WIDCOMM software.
• After opening the menu turn the sliding switch back side of
keyboard to ON position and afterwards press 1× the
Pairing button.
• On the front side of keyboard the Pairing-LED should flash
rapidly indicating the Pairing mode.
• Following click in the menu window on Search for devices
in range task. Then,
Fi 10 a keyboard icon will appear in the
Fi
window.
• Double click the Bluetooth keyboard icon, and click YES to
connect to the Human Interface Device.
• You'll be prompted
with a PIN code for
pairing between
your PC and your
Fi
keyboard. Please
enter exactly the
same PIN code on
your Bluetooth
keyboard and
confirm with OK.
• After input appears a red tick near the keyboard icon.
Fi
12
Fi
• Right click the icon to choose Connect Device.
13
11
• Confirm the appearing request with YES.
• After the Bluetooth keyboard is paired with your computer,
you will get this green indicator icon. Now you can use this
Bluetooth keyboard to input the data
into your computer.
Fi
15
Advice:
Once the pairing procedure has been carried
out successfully, the computer respectively the Bluetooth keyboard can be turned on and off
without repeating the pairing procedure. They will connect automatically again.
Fi
16
2. How to use the keyboard
After successful launch enjoy now during the operation a free and independent choice of
location up to approx. 10 m distance to the PC. More or less range can be caused by metallic
dividing walls, other computer cases, monitors, ZIP drives, loudspeakers, switching power
supplies etc., but also by different loading capacity of the batteries. The status LEDs on the
front side of your Bluetooth keyboard inform you about the current operating condition.
2.1 Meaning of status LEDs
• Pairing-LED
It is used to indicate the Bluetooth keyboard is in pairing mode
Fi
17
(searching a Bluetooth receiver). When the pairing button is pressed,
the LED flashes till a receiver has been found or the relevant computer
stops pairing in advance.
• Reconnecting-LED
It is used to indicate that the Bluetooth keyboard is reconnecting to the
Fi
18
already founded receiver after waking up or power up via the accordant
authority (registered password or PIN).
The USB port on the EUT connected to personal computer is only for battery charge if the rechargeable
battery used, EUT can’t transfer data to PC via the charging cable. It means when EUT is in charging, EUT
is under off condition. If user wants to use the EUT, he must disconnect the USB port.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2008:12:01 06:11:01Z
Modify Date                     : 2008:12:18 12:32:27+08:00
Page Count                      : 8
Creation Date                   : 2008:12:01 06:11:01Z
Mod Date                        : 2008:12:18 12:32:27+08:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Metadata Date                   : 2008:12:18 12:32:27+08:00
Has XFA                         : No

EXIF Metadata provided by EXIF.tools