Primatronix CV200RT 433MHz Transceiver User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	794937
Application ID	U4JvFrUoXa4vVurQJFqABg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	40.55kB (506905 bits)
Date Submitted	2007-05-22 00:00:00
Date Available	2007-05-22 00:00:00
Creation Date	2006-11-28 16:57:50
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2007-05-03 16:38:43
Document Title	1
Document Creator	Acrobat PDFMaker 7.0.7 for Word
Document Author:	soft04

THE FEATURE ORIENTED PHONE SYSTEM
FOR EVERY HOME
With exclusive Emergency Help System
you can Call-4-Help with a press of a button
Hear who is calling
before you decide to answer an incoming phone call*
Answer your phone and speak hands-free
even if you can’t get to the phone**
USER MANUAL
ClearVoice 50 B™
ClearVoice 100 B™
ClearVoice 200 B™
CALL
BACK
CALL#
AM
REPEAT NEW
VOICE
CLIP
PM
SCROLL
DELETE
MENU
LOUD
LOW
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
HANDSET
LOUD
Consumer Helpline
SPEAKER
CLIP
EXIT
FLASH
HOLD
REDIAL
A Quality Of Life Product
TM
1-888-558-7420
Patents Pending
TABLE OF CONTENTS
Important Safety Instructions ...................................................................................................................................2
Safety Instruction for Batteries ......................................................................................................................................2
Installation Instructions .................................................................................................................................................2
Important Notes .............................................................................................................................................................3
FCC Wants You to Know............................................................................................................................................3
Service ...........................................................................................................................................................................4
General Information ....................................................................................................................................................4
About Your Unit............................................................................................................................................................4
Location of Controls .....................................................................................................................................................5
Installation …………………………………………………..……………………………………………….…… 6-7
Where to install this feature oriented telephone/ Installing batteries/ To replace the battery of the Remote .
Pendant/ choose your location/Connecting the ClearVoice 50B,100B or 200B/ Wall mounting/
Special Highlight Features....................................................……………………................... ……...........................8
Using features of your telephone that do not need programming ……………………………………….….. 9-10
Ringer Volume control/ Handset Volume Control/Tone receiving Adjustment/Dialing a Call/ Pre/dialing a Call/
Receiving a Call/Receiving a Call/Remote Speakerphone (ClearVoice 100B and 200B)/Speaker Volume
Control/Redial/Pause/ Hold/ Flash/ Hearing Aid Compatibility
Setting Up to use the programmable features of your telephone …………………………………10-16
Setting the LCD contrast / Setting the Time and Date /Store Numbers to Phone Book and Name
Recording for Phone BookEntering Emergency telephone numbers and names/Entering General
Telephone Numbers and Names/Name Recording for Phone Book/T record a voice name to a
telephone # in the Phone Book/To Record Emergency Message/Check Emergency Message/
Setting the Tone-Pulse /Setting the Ringer Tone/Setting the Language/Setting the Voice ONOFF/Recording/Editing/Deleting voice prompt of name in Phone Book/To edit the Phone Book
Memory/To delet the Phone Book Memory/To review the Phone Book Memory Important: Your
ClearVoice unit is already has the Tone-Pulse preset to Tone, and the language is preset to English
Using the Emergency Features …………………………………………..............................................16-19
Emergency Help System / Emergency Message / To delete your own emergency message and
revert to the pre-recorded message/To Dial and check an entered and displayed emergency
telephone number from the Phone Book/Important Information about ClearVoice 200B Emergency
Help System/Checking the range of the Dual Wireless Pendant/To Activate the Emergency Help
System if an Emergency Occurs/ To Store a Number in hotkey
The Caller ID ........................................................................................................................................19-21
Receiving a Call (the telephone can store up to 64 calls) / Viewing the Caller ID Memory / Erase
the Caller ID Memory / Call Back (Redial) from the Caller ID Memory / Copy from the Caller ID to
the Phone Book /
Important Revie / In Case of Difficulty ...................................................................................................21
Limited Ninety-Day Warranty ..................................................................................................................22
IMPORTANT SAFETY INSTRUCTIONS
When using your telephone equipment, basic safety precautions should always be followed to reduce
the risk of fire, electric shock and injury to persons, including the following:
1. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry
tub, in a wet basement or near a swimming pool.
2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a
remote risk of electric shock from lightning.
3. Do not use the telephone to report a gas leak in the vicinity of the leak.
4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire.
They may explode. Check with local codes for possible special disposal instructions.
5. Plug the adaptor to the socket-outlet that near the equipment and shall be easily accessible.
SAVE THESE INSTRUCTIONS
SAFETY INSTRUCTION FOR BATTERIES
CAUTION:
TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS, READ AND FOLLOW THESE
INSTRUCTIONS.
1. Use only 4 x AA alkaline battery. Pendant uses a 12V alkaline battery.
2. Do not dispose of the batteries in a fire. The cell may explode. Check with local codes for possible
special disposal instructions.
3. Do not open or mutilate the battery. Released electrolyte is corrosive and may cause damage to the
eyes or skin. It may be toxic if swallowed.
4. Exercise care in handling battery in order not to short the battery with conduction materials such as
rings, bracelets and keys. The battery or conductors may overheat and cause burns.
5. Do not attempt to recharge the battery identified for use with this product. The battery may leak
corrosive electrolyte or explode.
6. Do not attempt to rejuvenate the battery identified for use with this product by heating them. Sudden
release of the battery electrolyte may occur causing burns or irritation to eyes or skin.
7. When inserting battery into this product, the proper polarity or direction must be observed. Reverse
insertion of the battery can cause charging, and that may result in leakage or explosion.
8. Remove the battery from this product if the product will not be used for a long period of time (several
months or more) since during this time the battery could leak in the product.
9. Discard “dead” battery as soon as possible since “dead” battery are more likely to leak in a product.
10.Do not store this product, or the battery identified for use with this product, in high-temperature
areas. A battery that is stored in a freezer or refrigerator for the purpose of extending shelf like
should be protected from condensation during storage and defrosting. The battery should be stabilized
at room temperature prior to use after cold storage.
SAVE THESE INSTRUCTIONS
INSTALLATION INSTRUCTIONS
1. Never install telephone wiring during a lightning storm.
2. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.
3. Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected
at the network interface.
4. Use caution when installing or modifying telephone lines.
NOTE: Refer to “FCC Wants You To Know” section before connection to telephone.
IMPORTANT NOTES
• The telephone portion of your dialer/message console has been tested and found to comply with
all applicable UL and FCC standards.
• This product is not a security system or an emergency service device.
• The manufacturer makes no claim as to the suitability of this product to perform as a life-saving
device. See section marked LIMITED NINETY DAY WARRANTY for full warranty conditions.
• The unit will not work through a switchboard, some phone systems that don’t always supply a
standard dial tone or phone systems that require a delay, (for example, some systems where you
must dial a number to get an outside line). For more information, call 1-888-558-7420.
FCC WANTS YOU TO KNOW
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On
the bottom of this equipment is a label that contains, among other information, a product identifier in the
format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.
An applicable certification jacks Universal Service Order Codes (USOC) for the equipment is provided
(i.e., RJ11C) in the packaging with each piece of approved terminal equipment
The REN is useful to determine the quantity of devices you may connect to your telephone line and still
have all of those devices ring when your telephone number is called. In most, but not all areas, the sum
of the REN’s of all devices connected to one line should not exceed five (5.0). To be certain of the
number of devices you may connect to your line, as determined by the REN, you should contact your
local telephone company to determine the maximum REN for your calling area.
If your telephone equipment causes harm to the telephone network, the telephone company may
discontinue your service temporarily. If possible, they will notify you in advance. But if advance notice
isn’t practical, you will be notified as soon as possible. You will be informed of your right to file a complaint
with the FCC.
Your telephone company may make changes in its facilities, equipment, operations or procedures that
could affect the proper functioning of your equipment. If they do, you will be notified in advance to give
you an opportunity to maintain uninterrupted telephone service. If you experience trouble with this
telephone equipment, disconnect from the network until the problem has been corrected or until you
are sure that the equipment is not malfunctioning.
This equipment may not be used on coin service provided by the telephone company. Connection to
party lines is subject to state tariffs
Warning: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. Some telephone equipment operate at
frequencies that may cause interference to nearby TV’s and VCR’s; to minimize or prevent such
interference, the base of telephone equipment should not be placed near or on top of a TV or VCR; and,
if interference is experienced, moving the telephone equipment farther away from the TV or VCR will
often reduce or eliminate the interference. However there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio TV technician for help.
a) A plug and jack used to connect this equipment to the premises wiring and telephone network must
comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant
telephone cord and modular plug is provided with this product. It is designed to be connected to a
compatible modular jack that is also compliant. See installation instructions for details.
b) NOTICE: If your home has specially wired alarm equipment connected to the telephone line, ensure
the installation of this telephone does not disable your alarm equipment. If you have questions about
what will disable alarm equipment, consult your telephone company or a qualified installer.
Telemergency Ltd.
200-16B2 13th Avenue
Ronkonkoma, N.Y. 11779
SERVICE
According to FCC regulations, this equipment, which has been certified and registered by the FCC,
may only be repaired by authorized persons. If repairs or adjustments are made by an unauthorized
person, the FCC certification may be voided. Should you encounter any problems, please call the toll free
Consumer Helpline for assistance:
1-888-558-7420, 9:00 am - 4:30 pm (E.S.T.)
Any Questions?
STOP...don't take unit back to the store.
Call our toll-free number... 1-888-558-7420
Listen as our experts talk you through the problem
GENERAL INFORMATION
UNPACKING
This package contains:
• ClearVoice unit
• Accessory: CV200B-Wireless dual remote pendant with ClearVoice 200B only
• One AC Adaptor
• One modular Line Cord
• User Manual/Warranty Information
If anything is missing or damaged, contact us at 1-888-558-7420. keep the package to transport unit.
For your reference keep a record of date of purchase and code number on the pendant. Please keep
the sales receipt for warranty reference.
Date of Purchase_______________________________
ABOUT YOUR UNIT
The following important features are included..amplified handset, dial a number from memory, dial a
number from its phone book, can let you listen to who is calling you if you have Caller ID service, use as
a standard speakerphone, use to Call-4-Help in an emergency, can be used as a speakerphone remotely
(optional on ClearVoice 50B) even if you can't get to the phone plus much more. ClearVoice Models
50B, 100B and 200B can even offer usage of these features for a limited time when new AA alkaline batteries are
installed. The batteries can supply power for up to 6 hours of power failure(s).
Safety Features:
The ClearVoice 50B, 100B and 200B have features which can be life-saving
….If the handset is not hung up, a loud alarm will activate after 30 minutes to
adviseusers to hang up the handset. The handset must be hung up to assure normal operation of the telephone.
….If in using the Speakerphone, user forgot to switch it off, after 30 minutes, the
speakerphone will reset, allowing full use of your telephone.
….In an Emergency, if the telephone is off hook, when the Telemergency Emergency Help System is activated, the call
will be terminated so that the Emergency System can proceed.
LOCATION OF CONTROLS
1. EXT button*
2 . CALL BACK / OK button
3. DELETE button
15.
button
16. MENU button
17. Tone Hi/Lo switch
4. Handset Holder
18.
5.
button
6. Speaker
7 . Handset volume control
8. Dial keypad
9. Loud LED
10. Display
11. New Call LED
12.
button
13.
button
14. Ringer Hi/Mid/Lo switch
CLIP
(Exit) button
19. FLASH button
20.
switch
21. HOLD button
22. REDIAL button
23. Ringer LED
24. SPEAKER button with LED
25. Pendant button
26. Pendant LED
ClearVoice 200B Pendant
*For use with the System 2 Pro total telephone system..This telephone allows for expansion which can allow you
hands-free communication throughout your home as well as for Emergency Help System. For more information,
call Telemergency™ customer service
Tel. # 1-888-558-7420.
INSTALLATION
Where to install this feature-oriented telephone
When installing this feature-oriented telephone, consider that the unit should be placed in an area of
common use during the day and night time.
ClearVoice 50B, 100B and 200B™ users should locate the phone within 10-15 feet line of sight from where user
spends a lot of time. The remote pick-up can be from a distance far greater than the 10-15 feet. This allows users the
remote speakerphone features of the unit plus remote activation of the Emergency Help
System™ ClearVoice 200B, for those who may not easily get to the telephone or are concerned with falling.
Installing batteries
Your telephone requires four AA alkaline batteries (not supplied) if you wish to utilize all features during power failures.
During power failures, full functionality of the telephone is maintained for a total of a maximum
of 6 hours total power failure time. If you do not have batteries installed, the basic phone function of
calling out and receiving a call can still be used.
Note: The telephone numbers in memory and the voice recordings are stored in non-volatile flash
memory which do not require battery backup.
Before opening the battery compartment, make sure the telephone is disconnected from the telephone
line and the 120V AC Adaptor is disconnected from the unit.
1. Use a flat-blade screwdriver to lift the battery compartment door located on bottom of unit.
2. Insert four AA alkaline batteries into the compartment as indicated by the polarity symbols.
3. Snap the battery compartment door back into place.
Note: During power failures where the unit operates on battery, if there is no display or the display dims,
replace the batteries with 4 new alkaline AA batteries to assure maximum power failure time.
To replace the battery of the remote pendant
The pendant is equipped with a pre-installed internal battery.
1. Use a screwdriver to remove the screw on the lower case of the pendant and remove the lower case.
2. Replace the 12V DC Alkaline battery with a fresh one.
3. Replace the lower case and secure it with the screw.
4. It is important that full functionality be checked out after replacing battery.
Choose your location
Your ClearVoice 50B, 100B or 200B must be placed on a hard surface and connected to both the
telephone wall jack and an 115V AC power source. Do not plug into a 115V AC power source that is controlled by a
switch. Allow at least one inch to the rear and four inches above
the unit for ventilation. We suggest you locate it in a location within 10 feet of where user spends much of their time.
You can activate the speakerphone on an incoming call. You can typically speak form up to 10-15 feet from the phone
which should be in direct line of sight. Speaking louder may allow you to speak up to 20 feet, line of sight.
The ClearVoice 200B is supplied with a dual pendant which can activate
the speakerphone, but also can activate the emergency mode from a distance of up to 80 feet. This
range may vary based upon structural or environmental conditions.
To retain full operation of ClearVoice 50B, 100B or 200B during power failures insert 4 AA batteries
(not included) into the battery compartment located at bottom of unit. You may do this by simply
disconnecting the AC adaptor from the power source, then removing the battery cover, connecting the
batteries and replacing the cover. Then immediately connect AC Adaptor to AC outlet to assure battery
life is not being affected. Note: The AA batteries should be alkaline.
Connecting the ClearVoice 50B,100B or 200B:
1 A. Plug one end of the supplied telephone cord into the jack labeled TEL LINE located at the back of
the unit.
B. Plug the other end of the supplied modular cord into the telephone wall jack.
2 A. Plug the supplied power cord of the AC Adaptor into the jack labeled DC9V 200ma located on the
back of the unit.
B. Plug the other end of the power cord into an electrical outlet not controlled by a wall switch.
Wall Mounting
On a Wall Phone Plate
1. Press and lift out the handset holder. Rotate it 180°, and snap it into place so it will hold the handset
in place when the phone is mounted on the wall.
2. Insert the mounting bracket’s two tabs into the matching slots opposite the keyhole slot on the underside
phone’s base. Then press down and slide the bracket upward until the tabs snap into place.
3. Plug one end of the supplied short modular cord into the LINE jack at the back of the base.
4. Plug the cord’s other end into the wall plate jack, then align the base’s keyhole slots with the wall
plate studs and slide the phone downward to secure it.
On a Wall Without a Plate
To mount the phone directly on a wall, in addition to the preceding steps, you need two screws (not
supplied) with heads that fit into the keyhole slot on the bottom of the base.
1. Drill two holes 83mm apart (vertically). Then thread a screw into each hole, letting the heads extend
about 5mm from the wall.
2. Substitute the long modular cord for the short cord.
SPECIAL HIGHLIGHT FEATURES
The Phone that will automatically hang up if accidently left in Speakerphone mode for a period of time.
The Phone that will automatically advise you with a loud beeping alarm if accidently left OFF Hook
The Phone that will activate the Emergency Help System if pendant is activated
The Phone that can tell you who is calling
The Phone that can answer a call remotely
The Phone that can get you emergency help with a press of a button on accessory CV114 pendant
Easy To See –
Big Buttons
Large LCD display with large characters
Easy to Hear –
Enhanced Voice Clarity for the hearing impaired
Amplified Volume and Tone
Volume Adjust For Handset
Loud Ringer
Hearing Aid Compatible
Easy To Use –
Voice Guided Programming Menu
Talking Keypad and Phone Book
Dial Phone #s From Phone Book
Talking Caller ID*
Phone Book –
Stores up to 30 telephone #s in memory with name-for general and emergency #s with (EHS)
Up to 64 Caller ID #s
Emergency Help System (EHS) –
This is a feature that allows you to Call-4-Help to those people you would like called in an emergency.
For the Emergency Help System to be activated and also dial out the emergency telephone numbers
entered in the sequence you would like the telephone nos. called, requires that the telephone line
ClearVoice 200B is connected to is ON HOOK(hung up) and all instructions in setting up
have been done. The unit has a pre-recorded generic emergency message.
No Monthly Fees!**
(+) button on unit or optional pendant to activate EHS
Loud Local Alarm
Dials Emergency #s programmed #s in sequence
Sends out Emergency Message To Called #s
Speakerphone feature allows called party(s) to speak to in-range caller
Other Features –
Real Time Clock
Battery Backup
Wall/Desk Usage
Off-Hook Detect
Definitions:
Talking Caller ID – allows user to hear # calling or name- Caller ID service required
Remote Pickup (Clearvoice 100B, 200B) user can answer an incoming call remotely
Remote Speakerphone (ClearVoice 100B, 200B) – allows user to speak hands-free remotely up to 20 feet
Emergency Help System (EHS) - with a press of a button on unit can call emergency #s you entered
Remote activation of Emergency Help System (EHS)***– CV114 pendant can activate the EHS from
a distance of up to 100 feet depending upon structural and environmental conditions
LCD display – shows last 64 nos. called, time and date and prompts to simplify usage
Voice Clarity (Amplified/tone control) – handset volume/tone adjust to improve clarity of call for the hearing impaired
or noisy environments.
*Caller ID service required
**No Monthly Fees – Emergency Help System
USING FEATURES OF YOUR TELEPHONE THAT DO NOT NEED PROGRAMMING
Notes: To program names and #s for the featured Phone Book and Emergency Help System as well as add’l
programmed features proceed to section: SETTING UP TO USE THE PROGRAMMABLE FEATURES OF YOUR
UNIT
Before proceeding, move speaker phone control on side of unit to mid-position.
Ringer Volume Control
The ringer sound level can be adjusted by sliding the RINGER switch located on the side of the unit to select high (HI),
mid (MID) and low (LO) level.
The red bright LED on front of unit will flash with all incoming calls.
The red bright LED, located on rear of unit will light if you have Caller ID and have not answered 1 or more calls
Handset Volume Control/Tone Receiving Adjustment
The HANDSET volume control located under the handset enables user to adjust the amplification of the
call which can result in a more comfortable listening level. To turn on this amplifier after you pick up
the handset…press red
button on telephone for 1 second and release, LOUD LED display will now be lit.
Move handset volume control located under handset to desired amplification. Move TONE level, located on side of unit
to desired level. Your unit is now set to your desired level as long as the settings are kept. Each time you hang the
button for 1 second
handset up, the amplifier will go OFF. Each time you pick up the handset, simply press the red
to turn on the amplifier. To turn off amplifier and tone level simply press the red
button for 1 second. LOUD LED will
go OFF
Dialing a Call
1. Pick up the handset or press SPEAKER button (the speaker LED will light) and wait for a dial tone.
2. Press the keypad for the telephone numbers you wish to dial. The display will show the number that
you dialed on the keypad. If you dial a number over 14 digits long, it will show the last 14 digits only.
3. When you have completed your call, hang up the handset, or press SPEAKER button again.
To switch from a handset conversation to a speakerphone conversation .... press the SPEAKER button
and hang up the handset. To switch from speakerphone to handset, simply pick up handset.
Pre-Dialing a Call (Hearing each digit entered before dialing)
1. Dial on the keypad the telephone number. The telephone will voice the digits dialed (with voice option
ON). To correct a number press the DELETE button for each incorrect digit.
2. Press SPEAKER button and telephone # will be dialed.
Receiving a Call
When you receive a call, the telephone rings, the Ringer LED flashes and the display shows the CALL#
and the caller telephone number, and will state the name of the caller if the TELEPHONE # matches with a
name recorded in the phone book*, if not, it will say the numbers of the calling party if available (Caller ID
service required). Caller ID service required to detect Call# and/or name of caller.
This feature allows you to decide to pick up the phone or not depending on who is calling.
If you want to talk to the caller:
1. Pick up the handset or press SPEAKER button to answer the call.
2. At the end of the call, return the handset to the cradle or press SPEAKER button again to disconnect..
Receiving a Call/Remote Speakerphone (ClearVoice 100B and 200B)
Simply press the red button on the pendant for 1 second to connect to an incoming call and
activate its speakerphone, if you hear the phone and you are within range, but can’t get to the telephone.
To terminate the call, press the red button until you hear a Beeptone from your ClearVoice unit.
Note: An important feature is included that if the speakerphone was activated with the wireless pendant and you forgot
to hang up, After 30 minutes, the phone will beep for 7 seconds. If within these 7 seconds the called party (if still
connected) presses any numeric key on the phone, the unit will be kept in speakerphone mode conversation can
continue for 30 additional minutes. If no numeric key on the phone is pressed during the 7 seconds, the telephone will
deactivate the speakerphone and hang up, unless you pick up your handset on the ClearVoice unit to continue.
Note:This convenience feature is particularly useful if you are sitting on a couch, busy doing something else,
can’t get to the phone on time and don’t want to miss the call.
Speaker Volume Control
You can adjust the speaker volume for a more comfortable listening level by sliding the
switch.
This will also adjust the volume of the voice driven features as well as speakerphone levels when speaker button
activated. It is suggested to maintain the volume at medium level.
Redial
Note: To redial the last number called.
1. Lift the handset or press SPEAKER button.
2. Press the REDIAL button.
Noted: The last number dialed (up to 32 digits long) can be redialed.
Pause
You can insert a 3.6 seconds which will create a pause into dialing or storing a number into memory in
order to access custom services and possible short delays in getting dial tone.
Press REDIAL button at the desired point in number. Press REDIAL button again if an additional 3.6
seconds is needed.
Hold
To place a call on hold, press HOLD button. The hold indicator will light. To return to the call, press the
SPEAKER button (or lift the handset), the HOLD LED goes off.
Flash
Many special network services, such as Call Waiting, require a switch hook signal. The FLASH button
provides the electronic equivalent of a switch hook operation.
For example, if you subscribe to Call Waiting*, you can use this feature to answer another call on the
same line by simply pressing the FLASH button on the unit. Press the FLASH button to return to the
first call.
• Please note that a subscription may be required to use these services.
Hearing Aid Compatibility
This unit is compatible with inductively coupled hearing aids.
SETTING UP TO USE THE PROGRAMMABLE FEATURES OF YOUR UNIT
Notes: Your unit has many VOICE PROMPTS to assist you
Symbols you should know: OK BUTTON Is also used for CALL BACK
MENU BUTTON Is also used for EDIT
CLIP BUTTON is also used for EXIT
The following features are shown on the LCD display as well as Voice Prompts can be heard
Setting the LCD contrast
Setting the Time and Date
Store # to Phone Book
Name Recording for Phone Book
Record Emergency Message
Check Emergency Message
Settings for Tone /Pulse operation- preset to tone
Setting the Ringer Tone (Select the sound that fits you best)
Setting the language (English or Spanish) - preset to English
Setting the Voice ON/OFF (preset to Voice ON)
Lets get started: Slide Speaker Volume (located on side of unit) to mid-position to hear the voice prompts
Important: In setting the following criteria, if there is a delay in programming a specific feature of more
than 60 seconds, your unit will reset. In that event please re-enter the section you are entering.
10
Setting the LCD contrast (If LCD contrast is OK, press Exit button)
Note:depending on the viewing angle of the telephone, the user may want to adjust the LCD contrast:
1. Press and release the MENU button. The display shows LCD CONTRAST.
2. Press the OK button (located upper front left. The display shows the current contrast setting with
values between 1 and 5.
3. Press
or
scroll buttons (upper front right) and scroll to select the desired contrast level.
Press OK button again to accept. Unit will now say TIME/DATE.
4. Press
CLIP
(Exit) button to exit this set-up mode if you want to bypass TIME/DATE.
Setting the TIME and DATE
Important: If you have subscribed to Caller ID service, please note that some telecom providers, when
sending the Caller ID signal also send the time and date. In this case the telephone will automatically
set its internal clock.
1. Press and release the MENU button until TIME/DATE is shown.
2. Press the OK button. The display shows ENTER TIME and the hour digit is flashing.
3. Select the current hour scrolling
or
buttons and scroll to the present hour and confirm with OK
button. The minutes will now flash in the display.
4. Select the required minutes scrolling
or
buttons and scroll to the present minute.
Press the OK button.
The display now shows ENTER DATE and the month digit is flashing. .
5. Select the current month scrolling
or
buttons and scroll to the present month.
Confirm with OK button. The day will now flash in the display.
6. Select the current day scrolling
or
buttons and scroll to the present date.
Confirm with OK button. Unit will say STORE # TO PHONE BOOK.
7. Press
CLIP
(Exit) button to exit this set-up mode if you want to bypass Store #S TO Phone Book
Store #s to Phone Book & Name Recording For Phone Book (Emergency Help System and General #s)
Note: The 30 # phone book allows you to enter, display, record the persons name and specify if this a
telephone no. that is to be stored as a # you wish to include in your phone book or a phone # or phone #s
you would also want to call in an Emergency (for detailed information see section on Telemergency Emergency Help
System)
Suggestion: For phone #s to be called using the Emergency Help System we suggest you list them in the sequence
you would like them called as shown below (Telemergency Emergency Help System before starting:
Note: All telephone #s are to be entered exactly as you would dial the telephone # from where the ClearVoice
unit is to be used. Before proceeding please write the Emergency telephone #s in the spaces below. Note: The
calling sequence will be as below if programmed into the ClearVoice unit.
Location 1 means it is the 1st no. To be called, location 2 is the 2nd # to be called, etc.
Note: Before entering 911 “if desired” as one of the telephone #s to be called in an emergency, check with your local
911 service to verify the use in your area.
Telemergency Emergency Help System
Location
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Name
Telephone #s *
_____________________ ________________
_____________________ ________________if desired
_____________________ ________________if desired
_____________________ ________________if desired
_____________________ ________________if desired
_____________________ ________________if desired
_____________________ ________________if desired
_____________________ ________________if desired
_____________________ ________________if desired
_____________________ ________________if desired
Besides Telephone #, you may also require 1 and/or the Area Code.
TABLE 1
11
Storing up to 30 telephone numbers in the phone book including emergency nos. to be called in
an emergency.
Entering Emergency telephone numbers and names: (for Emergency Help System)
Note: If you have a telephone system where it is may be required to put a pause (P) before dialing a
particular digit press the REDIAL button and a 3.6 second pause will be created. This is also important
if you are using on a PABX or PBX where you insert a pause before and after entering 1,8 or 9,or other
systems where outside line dial tone can be delayed.
1. Press (EXIT) button until PHONE BOOK icon is displayed on LCD display and states Phone Book.
2. Press and release the MENU button until STORE NUMBER is shown and states Store #s to Phone Book.
3. Press the OK button. The cursor will flash on the left side of the LCD display in the first position.
4. Enter the required telephone number (Table 1) with a maximum of 22 digits using the number pad and
Press OK button to confirm, (both the erase feature and pause feature can be used when storing the
Telephone number), telephone numbers are to be entered exactly as you would dial the telephone no.
manually from where the ClearVoice model is to be used.
5. Enter the required name with a maximum of 16 letters. Cursor shown as (I) is all the way on left side of
LCD display……..See Table A below for details (How to enter names in the phone book).
6. Press OK button to confirm.The display now shows EMERGENCY OFF. Since it is an Emergency
Telephone #, Press a scroll button
or
until it reads Emergency ON on LCD display
7. Press OK button.
or
to desired Location…For example: If it is the 1st # to be called, press a scroll
8. Press a scroll button
button until it reads 1 on the display, 2 for 2nd etc.
9. Press OK button..unit will say “Number Saved” Unit will now say Name Recording For Phone Book
10. Press and hold down OK button.. you will hear a Beep..speak into unit with Name related to a
telephone #.
Note:To record voice (example ‘this is John’), hold down OK button, immediately speak clearly into
microphone after a beep and “VOICE” icon is flashing on LCD display.. Release the button when
you finished or the unit will stop recording after 3 seconds. The voice prompt will then be played
automatically. [Recording the Voice is necessary for the personalized talking Caller ID and talking
phone book feature].
You can repeat steps 1 to 9 to enter more numbers or press
CLIP
(Exit) button to exit
How to enter names in the phone book
The number buttons are also inscribed with letters for entering the name. By repeatedly pressing the
appropriate button, upper case letters as well as numbers and special characters can be entered.
Overview: Note: In entering a name Note: The numeric keys 1 thru # can be used as shown in Table I
space + & - / 1
ABC2
DEF3
GHI4
JKL5
MNO6
PQRS7
TUV8
WXYZ9
,.:;?0
‘@()*
$_%!#
TABLE A
Example: To enter the name JIM. Press 5 button until J is displayed ........... Wait 2 seconds
Press 4 button until I is shown ................. Wait 2 seconds
Press 6 button until M is shown ................Wait 2 seconds
12
General Telephone nos. to be entered
Name:
Telephone# *
____________________ ________________
____________________ ________________
____________________ ________________
____________________ ________________
____________________ ________________
____________________ ________________
____________________ ________________
____________________ ________________
____________________ ________________
____________________ ________________
Name:
Telephone# *
____________________ _______________
____________________ _______________
____________________ _______________
____________________ _______________
____________________ _______________
____________________ _______________
____________________ _______________
____________________ _______________
____________________ _______________
____________________ _______________
Besides Telephone #, you may also require 1 and/or the Area Code
TABLE 2
Entering General Telephone #s and Names
Notes: You can enter a total of 30 telephone #s. Ex. If you entered 10 telephone #s for the Emergency
Help
System, you can enter 20 General Tel #s.
If you have a telephone system where it is may be required to put a pause (P) before dialing a particular digit
press the REDIAL button and a 3.6 second pause will be created. This is also important
if you are using on a
PABX or PBX where you insert a pause before and after entering 1,8 or 9,or
other systems where outside line dial
tone can be delayed. You must enter the tel. no. and name on t he LCD display
1. Press (EXIT) button until PHONE BOOK icon is displayed on LCD display and states Phone Book.
2. Press and release the MENU button until STORE NUMBER is shown and states Store #s to
Phone Book.
3. Press the OK button. The cursor will flash on the left side of the LCD display in the first position.
4. Enter the required telephone number with a maximum of 22 digits from Table 2 above using the
number pad and press OK button to confirm, (both the erase feature and pause feature can be
used when storing the telephone number), telephone numbers are to be entered exactly as you
would dial the telephone no. manually from where the ClearVoice model is to be used.
5. Enter the required name with a maximum of 16 letters. Cursor shown as (I) is all the way on left
side of LCD display. See Table A above for details (How to enter names in the phone book).
6. Press OK button. The display now shows EMERGENCY OFF.
7. Press OK button. unit will say “Number Saved” Unit will now say Name Recording For Phone Book
8. Press and hold down OK button.. you will hear a Beep..speak into unit with the Name
related to the telephone #.
Note:To record voice (example ‘this is John’), hold down OK button, after a beep and “VOICE” icon
is flashing on LCD display, immediately speak clearly facing the unit. Release the button
when you finish or the unit will automatically stop recording after 3 seconds. The recorded
voice will then be played back automatically. [Recording the Voice is desirable for the
personalized talking Caller ID and talking phone book feature].
You can repeat steps 1 to 9 to enter more numbers or press
CLIP
(Exit) button to exit.
Name Recording for Phone Book
Notes: If you have Caller ID in, it can be important to record a name with the entered phone # in the phone book. In
this way when a caller rings your phone, the talking Caller ID will say the name of the caller. Otherwise the phone # will
be stated. It is also useful if you are scrolling for a particular persons telephone # you enter into the Phone Book.
13
If you have already recorded a name associated with a phone #, press MENU button to go to next step or press
Exit button.
To change or record a voice name to a telephone # in the Phone Book..
1. Press and release the Menu button until the Name Recording is shown on LCD display
2. Press and hold down OK button.. you will hear a Beep..speak into unit with the Name related to the
telephone #.
Record Emergency Message (for Emergency Help System)
It is important you record the personalized message with all the important information as in B. below.
A. Your unit includes a back-up pre-recorded message “This is an emergency call, to accept this call
press zero”.
B. Your own message that must be recorded to properly use the Emergency Help System (max. recording
time is 20 seconds). The message must always end with “please immediately hang up if you cannot
get me help now.. To accept this call press zero”.
Example: There is a medical emergency at the home of John Smith at 123 Main Street, Apt. 4D, please
come @ once. Please immediately hang up if you can't get me help now. To accept this call press zero.
To Record your own emergency message (for Emergency Help System)
1. Press and release the MENU button until the RECORD MESSAGE is shown.
2. Press and hold the OK button. Start your message directly after the signal tone and “VOICE” icon is
flashing. While recording, keep at a distance of 10-12 inches from the telephone so that you can speak
easily into the microphone on the upper side.
3. Release the OK button after you have finished your emergency message.
The message will now be played back automatically.
Check Emergency Message (for Emergency Help System)
You can check the emergency message at any time.
1. Press and release the MENU button until the CHECK MESSAGE is shown.
2. Then press the OK button to play back the message.
Setting the Tone/Pulse (you may skip this step by pressing MENU button)
Important: Your unit is already preset to TONE dialing . If you have a tone dialing phone and tone
dialingservice, skip this step by pressing the Exit button.) If you have a rotary (pulse) dialing system in your
home,follow these instructions.
1. Press and release the MENU button until TONE/PULSE is shown.
2. Press the OK button, the display shows TONE.
3. Select the TONE or PULSE by scrolling
or
buttons.
Confirm with OK button. Unit will say TONE/PULSE.
4. Press
CLIP
(Exit) button to exit this set-up mode.
Setting the Ringer Tone
Note: Your unit is preset to a Ringer tone. (If you do not wish to change press the Exit Button)
To change..follow these steps.
1. Press and release the MENU button until RINGER TONE is shown.
2. Press the OK button, the display shows 1.
3. You can select ringer 1, 2, or 3 by scrolling
or
buttons.
Confirm with OK button. Unit will say LANGUAGE.
4. Press
CLIP
(Exit) button to exit this set-up mode.
Setting the language (you may skip this step by pressing MENU button)
Note: This unit has a voice menu as well as a pre-recorded emergency message that can display and/or
speak its messages in English or Spanish. Your unit is set to English. Skip this section if you wish to
continue usage in English by pressing EXIT button.
14
This telephone is able to write on the LCD and to give you a voice guide in two different languages. By
selecting the language the user will automatically select both the voice and the written LCD language.
1. Press and release the MENU button until LANGUAGE is shown.
2. Press the OK button, the display shows ENGLISH (for example).
3. Select the desired language scroll the
or
buttons. Confirm with OK button. Unit will say Language..
4. Press
CLIP
(Exit) button to exit this set-up mode.
Setting the Voice ON/OFF (skip this step if you wish to keep the Voice prompts ON)
The telephone is factory preset with all voice features ON. (To exit, press Exit button)
Note: The volume of the voice features is regulated thought the
slide switch located on the side of
unit.
Important: If using the voice prompts or speakerphone, it is important to slide switch to the middle.
If the user does not wish to hear the voice prompts, this voice feature can be set to OFF. We suggest
that while programming you keep this feature ON.
1. Press and release the MENU button until VOICE is shown.
2 Press the OK button.
3. Scroll the
or
buttons to select between VOICE ON or OFF and confirm with OK button. Unit will
say VOICE ON/OFF.
4. Press
CLIP
(Exit) button to exit this set-up mode.
Recording / Editing / Deleting voice prompt of name of phone book
With caller ID service activated, when an incoming call is received, the unit will display and announce
the caller’s phone number. If the caller’s phone number is stored in the phone book, and caller’s name
will be displayed too.
If the voice prompt is recorded for this phone number, the unit will announce the voice prompt recorded
instead of the caller’s phone number.
1. Press and release the MENU button until the “NAME RECORDING” is shown.
2. Press the OK button. A list of the phone book entries will be display.
3. Sroll
or
buttons to select the list you like to record a voice or name for it.
4. To record or edit the voice prompt, hold down OK button. Speak clearly into the microphone after a
beep and “VOICE” icon is flashing. Release the button when you finished or the unit will stop recording
after 3 seconds. The new voice prompt will then be played automatically.
To delete the voice prompt recorded, press DELETE button during the voice prompt is playing.
5. Repeat step 3 to 4 to edit or delete more entry or exit the set-up mode by pressing the
CLIP
Exit button.
To Edit the Phone Book Memory (All telephone #s including Emergency #s and their location)
1. Press and release CLIP (Exit) button,
phone book icon is shown.
2. Select the required location from the phone book by scrolling
or
buttons.
3. Press and hold MENU button for two seconds. The display will show EDIT?.
4. Press OK button, the first digit of the selected phone number will be flash.
5. You can move the cursor to the required position by scrolling
or
buttons. To delete the digit,
press DELETE button, or press any numeric key to replace the digit and confirm with OK button.
Then the display shows the flashing first letter of the name.
6. Move the cursor to the required position by scrolling
or
buttons. To delete the letter, press
DELETE button, or press any numeric key to replace the name, and confirm with OK button,
“EMERGENCY ON or OFF” is shown.
7. If the display shows “EMERGENCY OFF”, and you want to change it as an emergency’s call dial out,
select “EMERGENCY ON “ by scrolling
or
buttons, and confirm with OK button, now “LOCATION”
is shown. Select the required location by scrolling
or
buttons and confirm with OK button, if the
location is in use, now display shows OVERWRITE?, confirm with OK, “SAVED!” is shown.
• If you select “EMERGENCY OFF” and confirm with OK, “SAVED!” is shown.
8. You can repeat step 2 to 7 to edit more numbers or press
15
CLIP
(Exit) button to exit.
To Delete the Phone Book Memory (All telephone #s including Emergency #s and their location)
1. Press and release CLIP (Exit) button,
icon is shown.
2. Select the required location from the phone book by scrolling
or
buttons.
3. To delete single memory, press DELETE button once. The display will show the DELETE?. Press
DELETE button for 2 seconds. The telephone number and name will be deleted and the display will
now show another number from the phone book.
Important:To delete all entire memory, press and hold DELETE button until the display shows DELETE
ALL? If you delete the entire memory, you must re-enter the telephone #s to call
Press DELETE button for 2 seconds until EMPTY appears on the display.
IMPORTANT: If you delete the entire memory, you must re-enter the telephone #s to call for the
Emergency Help System
To review the Phone Book Memory (All telephone #s including Emergency #s and their location)
1. Press and release CLIP (Exit) button,
phone book icon should be shown.
2. Review the stored phone number by scrolling
or
buttons, or enter the initial letter of the name of
the person you wish to call using the number pad. After a short time, the display will show the first
stored telephone number with this initial letter, say the name and VOICE icon is shown if it was
recorded, or voice the telephone number. You can now search for further numbers under this letter by
scrolling
Notes:
• If no telephone number is stored, the display will show EMPTY.
• After you view all the call in memory, the display will show END OF LIST.
• If a reviewed number is shown with
icon on the LCD display.. that is one of the numbers that can
be dialed if the emergency help system (+) has been activated.
EMERGENCY HELP SYSTEM
EMERGENCY HELP SYSTEM
This is a feature that allows you to Call-4-Help to those people you would like called in an emergency.
For the Emergency Help System to be activated and also dial out the emergency telephone numbers
entered in the sequence you would like the telephone nos. called, requires that the telephone line
ClearVoice unit is connected to is ON HOOK(hung up) and all instructions in setting up
have been done and verified. The unit has a pre-recorded generic emergency message.
Emergency Message
It is important you record the personalized message with all the important information as in B. below.
A. Your unit includes a back-up pre-recorded message “This is an emergency call, to accept this call
press zero”.
B. Your own message that must be recorded to properly use the Emergency Help System (max. recording
time is 20 seconds). The message must always end with “please immediately hang up if you cannot
get me help now.. To accept this call press zero”.
Example: There is a medical emergency at the home of John Smith at 123 Main Street, Apt. 4D, please
come @ once. Please immediately hang up if you can't get me help now. To accept this call press zero.
To Delete your own emergency message and revert to the pre-recorded message
If you have recorded your own message, you can delete this and by doing so revert to the pre-recording
message. Note: As stated above, it is important to record a personalized message.
1. Press and release the MENU button until the CHECK MESSAGE is shown.
2. Then press the OK button to play back the message.
3. During the playback, press DELETE button. Your own message will be deleted and you will be using the prerecorded greeting.
16
Important: Emergency Help System feature
Note: The phone book allows you to enter, display, record the persons name and specify if this a
telephone no. that is to be called in the units Telemergency Emergency Help system. It is important to note that any
telephone # entered that is less than 6 digits (including pauses area codes or any other digits will only be
called 1 time if the emergency help system is activated. (Ex. 911). The Emergency Help System when activated
will call all entered #s in the Emergency Help System 2 times, unless a called party stops the process or the
telephone # is less than 6 digits(including all pauses area codes etc.
To dial and check an entered and displayed emergency telephone number from the Phone Book
Memory:
1. Pick up the handset or press SPEAKER button (the speaker LED will light) and wait for a dial tone.
2. Press and release CLIP (Exit) button,
phone book icon is shown.
or
buttons until display with its
icon and location # is shown.
3. Scroll to desired tel. no. with
4. Press OK button, Unit will dial telephone no.
5. If you desire you can speak to called party and explain that you are adding their telephone number to
your Telemergency Emergency Help System.
IMPORTANT: Follow all Cautions below if Emergency Help System is to be activated. If you are using
the Emergency Help System and wish to call “911” or other emergency services which have a dispatcher,
the following procedures should be followed. Note: Check with your local “911” and/or other emergency
services and verify the use of their no. in your area.
WHEN PROGRAMMING EMERGENCY NUMBERS AND(OR) MAKING TEST CALLS TO
EMERGENCY NUMBERS:
1. Remain on the line and briefly explain to the dispatcher the reason for the call.
2. Perform such activities in the off-peak hours, such as early morning or late evenings.
Caution - To ensure proper operation, this equipment must be installed according to the enclosed
installation instructions. To verify that the equipment is operating properly and can successfully report
an alarm, this equipment must be tested immediately after installation, and periodically thereafter,
according to the enclosed test instructions.
Caution - This equipment cannot report an alarm when other equipment (telephone, answering system,
computer modem, etc.) connected to the same phone line is in use.
Important Information about ClearVoice 200B Emergency Help System:
Note: A tone dialing telephone is required for a called party(s) to be able to respond to a message
received from the Emergency Help System
1. If NO emergency numbers have been entered, the telephone will not dial any no. and just beep loudly
for 15 seconds continuously when the emergency (
) button on the telephone, is pressed and held
for more than 4 seconds or on the red button on CV112 dual pendant (standard on the ClearVoice
200B™) is pressed for 4 seconds. If red pendant button is pressed and held for 8 seconds or more
continuously, the emergency process will stop and reset.
2. It is important that the CV 114 pendant must be within the range of the telephone to activate the
emergency feature.
3. When the red key on the optional pendant (standard on the ClearVoice 200B™) is pressed and held
for 3-5 seconds and pendant is within the range of the unit , the LED on the pendant will begin flashing
to let user know that unit is activated and if the pendant is pressed for 8 seconds the LED will simply stay ON for
approximately five (5) seconds letting user know that the Emergency Help System is OFF and reset.
To activate the Emergency Help system is simple. Simply press and hold down red button until LED
flashes on the pendant. Then release button. This LED will stay lit for 15 seconds.
4. To stop the already activated emergency help system, turn off speakerphone by pressing the
17
speakerphone button or if using the dual pendant . Press the red button on pendant for more
than 8 seconds. LED will stop flashing and remain on for approximately 5 seconds.
5. If a called party presses 0 on their tone dialing telephone after hearing the emergency message, the
emergency speakerphone feature will be activated allowing the called party to speak to the caller,
and the caller can respond (if near or able) for up to 1 minute if near speakerphone of the ClearVoice 200B.
After 1 minute, beeps will be heard for 7 seconds and to continue either party
can press any key on their numeric keypad for the call to continue for another minute.
6. The emergency help system will automatically stop dialing the entered emergency numbers if
all the emergency nos. have been dialed 2 times or if any person who has received the emergency call
presses 1 then 2 on their tone dialing phones numeric keypad after the 0 key has been pressed.
Note: Any entered telephone # that is 6 digits or less will only be dialed 1 time. (ex. 911)
7. Do not pick up handset of ClearVoice 200B if the Emergency Help System has been activated, the
speakerphone is active. Lifting the handset will deactivate the Emergency Help System.
Checking the Range of the Dual Wireless Help Pendant
Note: The typical range can operate up to 100 feet line of sight. This range may be reduced by structural
or environmental conditions.
Follow all installation instructions. Before checking the range remove the telephone line cord where it is
marked TEL.LINE located at the back of the unit.
Press and hold the red button on the pendant until the LED on pendant begins flashing (from the
farthest place you will be using the pendant within the above criteria). If within range, The Emergency
Help System will be activated and you will hear the local alarm from unit. To stop the unit from dialing
emergency numbers.
Press and hold the red button for 8 seconds until the LED stops flashing and remains steady ON for
approximately 5 seconds. The pendant should be used at a reduced range.
Note: If you are out of range of the unit, move closer and follow the directions.
IMPORTANT: Install the telephone line cord to where it is marked TEL.LINE located at the back of the
unit.
To verify you reconnected the telephone line cord.. press speakerphone button until you hear dial tone,
then press speakerphone button again to turn off.
TO ACTIVATE THE EMERGENCY HELP SYSTEM IF AN EMERGENCY OCCURS:
IMPORTANT: For the Emergency Help System to activate and also dial out the emergency telephone
numbers entered in the desired sequence, as entered, requires that the telephone line the ClearVoice,
unit is connected to is ON HOOK(hung up), and all instructions in setting up this important
feature have been confirmed.
1. Press and hold the
button on the telephone for 4 seconds, the NEW CALL LED on the telephone
will blink for 15 seconds. The telephone local alarm sounds for 15 seconds. The telephone will verify the
telephone line and dial out the entered emergency help system numbers automatically in speakerphone
mode when phone line is available for dialing.
Note: Using the dual wireless pendant (CV200B). To activate the Emergency Help System with the
dual pendant , press and hold down the red button on the pendant for 4 seconds until the
pendant LED will begin flashing. The pendant will flash for approximately 15 seconds. This will
activate the Emergency Help System if user is within the operating range of the unit. Note: If user
holds the red pendant button for 8 seconds or more and is in the operating range of the unit, the
Emergency Help System will turn off and reset. The LED on pendant should stop flashing and its LED
to remain lit for approximately 5 seconds.
Note: To turn off the Emergency Help System if activated, you can press the Speakerphone button.
and note that the speakerphone LED will turn off or pick up handset of unit to turn off Emergency
Help System and speak to called party if on telephone line. Then hang up telephone (ON HOOK) to reset.
18
2. The telephone dials out the first of the entered emergency numbers (stored in the phone book
emergency location1) in speakerphone mode, and then begins playing the emergency message.
If during the period the emergency message is played (if available to the called party), called party
can acknowledge the call by pressing 0, the telephone will be put in speakerphone operation for 1
minute. After 1 minute, the phone beeps loudly for 7 seconds. If within these 7 seconds, the called
party presses a numeric key on the phone, the unit will be kept in speakerphone mode for 1 additional
minute continuously without stopping. If any numeric key on the phone is not pressed pressed during
the 7 seconds, the call to the called party is disconnected.
Note:If 0 is not pressed during the period the message is played, the next emergency number in the
sequence will be dialed automatically in speakerphone mode.
To Store a Number in hotkey
(User programmable)
The phone is equipped with an emergency hot key. This # can be programmed with the telephone
number of the police or any other emergency number for this button.
This button is not part of the phone book. It is a quick dial telephone number that when depressed simply
dials the telephone number
1. Press and release the MENU button until the STORE NUMBER is shown.
2. Press the OK button. The cursor will flash in the first position.
3. Enter the required telephone number with a maximum of 22 digits using the number pad and confirm
with OK button.
4. Press
button.
5. Press OK button to confirm. The number has now been saved and display show SAVED!.
6. Repeat step 2 to 5 to store other numbers for other memory buttons or press DELETE button to exit.
To dial the the entered #, simply pick up the handset or press SPEAKER
button.
button and press
Note: The number stored in this location is for manual dialing only and will not be dialed
With the emergency help feature unless the # is also entered in the phone book and when entered is
programmed in as an emergency no. and a specific location.
THE CALLER ID
At each incoming call with available Caller ID, the telephone will ring and announce the caller with their
name (if entered in phone book with name recording and matching last 7 digits of incoming phone no.
shown on LCD display), if available, or with a voiced telephone number if available.
Important: When using the Caller ID features, please note it is only available at Caller ID mode
(CLIP icon turns on). If the CLIP icon on LCD display is off, press (Exit) button once.
Please note that all Caller ID features are strictly related to the service provided by the provider
of your telephone services. It is necessary to subscribe to the Caller ID service supplying service
to your home to have the features of who is calling (Phone book of ClearVoice unit) or telephone #s on
incoming calls. Even if you don’t have Caller ID service you can enjoy the many features, since if you have an
answering machine, you can hear who is calling and decide to pick up call if you desire.
If the telephone is connected to a PABX the caller ID features depend on the PABX.
The Caller ID feature is only possible with the unit powered by the 120V AC power supplied to your unit
through the AC Adaptor enclosed with your unit or by the backup batteries in case of power failure(s) for
a total time of up to 6 hours of battery failure time.
19
Receiving a Call (the telephone can store up to 64 calls)
• If only the caller’s phone number is received, the display shows the caller’s phone number with the
time and date it was received. The NEW icon turns on and NEW CALL LED turns on.
Notes:
1. CALL#01 means this data is stored in Caller ID memory location #01.
2. The calling time and date are immediately recorded from the real-time clock.
• If both the caller’s name and phone number are received, the display shows the caller’s name and
phone number, with the time and date it was received. The “NEW” icon turns on and NEW CALL LED
blinks.
Note: If the caller’s name has more than 16 characters, only the first 16 characters will be displayed.
• If the name and number are not available due to the caller’s restriction, the display shows -PRIVATE
CALL- with the time and date received. The NEW icon turns on and NEW CALL LED blinks.
• If the name and number are not available, the display will show -OUT OF AREA- with the call’s time
and date. The NEW icon turns on and NEW CALL LED blinks.
• If a long distance call message is received, the display will show -LONG DISTANCE- with the calls
time and date. The NEW icon turns on and NEW CALL LED blinks.
• If an incorrect, invalid or incomplete Caller ID signal is received, the display shows -NO NUMBER-.
NOTES:
1. If the Caller ID memory is full, the oldest data will be removed on a first-in/first-out basis.
2. If the Caller ID information received duplicates another call in memory, the time/date will be updated
and the “REPEAT” icon will be lit.
3. If no key is pressed within 60 seconds, the display will display the total call counter, new call counter,
current time and date.
Viewing the Caller ID Memory
Press and scroll
button to review more recent calls. The CALL# will increase.
After you view the most recent data in memory, the display will show END OF LIST.
Press and scroll
button to review older calls. The CALL# will decrease.
After you view the oldest data in memory, the display will show END OF LIST.
If the #s in memory is being reviewed for the first time, the NEW icon will be lit.
The NEW CALL LED will turn off if all #s have been reviewed.
Erase the Caller ID Memory
1. Select the required Caller ID memory location by scrolling the or buttons.
2. To delete single memory, press DELETE button once. The display will show DELETE?. Press
DELETE button for 2 seconds. The data for that call will be erased, and the CALL# and Caller ID
information will be updated.
To delete the entire memory, it is necessary that the red light at rear of unit is OFF. (The NEW CALL LED will
be off if all #s have been reviewed) then press and hold DELETE button until the display shows DELETE
ALL?.
Press DELETE for 2 seconds until NO CALLS appears on the display. Both the total call and new call
counters will become zero, and the current time and date will be displayed.
Call Back (Redial) from the Caller ID Memory
With the ClearVoice 50A, 100A or 200A hung up (ON HOOK) Select the required Caller ID memory
location by scrolling
or buttons.
Press OK button two times, the speakerphone will turn on automatically and dial the selected number.
OR
With the handset picked up, select the required Caller ID memory location by scrolling
then press OK button, press OK again.
20
or
buttons,
Note: If the Caller ID number is 10 digits, press OK button once, the unit will insert “1” before the Caller
ID number automatically. You can press
button to select insert “1” or not. Press OK again, the
speakerphone will turn on automatically and dial the display number.
Copy from the Caller ID to the Phone Book
You can copy Caller ID information to the phone book while you are reviewing the Caller ID information.
1. Select the required Caller ID memory location by scrolling
or
buttons.
2. Press and hold MENU button for two seconds, display will show COPY TO MEMORY?.
3. Press OK button, display will show SAVED!.
IMPORTANT REVIEW
DO NOT:
• Connect to coin operated telephone systems
• Connect to party line telephone systems
• Connect to electronic key telephone systems
IN CASE OF DIFFICULTY
SITUATION
ACTION
LCD display cannot be seen clearly
Modify the LCD contrast setting
The telephone does not dial
Check that your telephone is connected
to the telephone line
The telephone cannot perform its features
Check that you have the AC adaptor connected
To AC power
CV 200B pendant cannot activate the
Emergency Help System (ClearVoice 200B)
Batteries in the pendant might require replacing
Called party cannot hear well during
conversation or during emergency call
Move closer to the telephone and speak in direction of
the telephone
Automatic Voice feature does not work
You might have programmed VOICE OFF in the
menu. Change to VOICE ON or you may have set the
Speaker Volume (located on the side) too low. Move
Speaker Volume to mid to high setting
Talking Caller ID does not work
Check that you have Caller ID also if you do it is
necessary that you have VOICE ON
Reset Procedure
Reset the unit by removing the AC power pack from
the AC power, the batteries and the telephone for 20
minutes and then reconnect. Note: This procedure
will not erase any of the #s in memory or the user
recorded messages
21
LIMITED NINETY-DAY WARRANTY
This product is warranted by Telemergency, Ltd. against manufacturing defects in material and
workmanship under normal use for ninety (90) days from the date of purchase. EXCEPT AS PROVIDED
HEREIN, TELEMERGENCY, LTD. MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED
WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN LIMITED
WARRANTIES CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN, TELEMERGENCY, LTD.
SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR
ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR
INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH
OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM
INCONVENIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, EVEN IF TELEMERGENCY, LTD. HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Some states do not allow the limitations on how long an implied warranty lasts or the exclusion of
incidental or consequential damages, so the above limitations, or exclusions may not apply to you. In
the event of a product defect during the warranty period, contact Telemergency, Ltd. For a Returned
Merchandise Authorization. Telemergency, Ltd. will, at its option, unless otherwise provided by law: (a)
correct the defect by product repair without charge for parts and labor; (b) replace the product with one
of the same or similar design; or (c) refund the purchase price. All replaced parts and products on which
a refund is made, become the property of Telemergency, Ltd. New or reconditioned parts and products
may be used in the performance of warranty service.
Repaired or replaced parts and products are warranted for the remainder of the original warranty period.
You will be charged for repair or replacement of the product made after the expiration of the warranty
period.
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse,
accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation or
maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs other
than those provided by Telemergency, Ltd; (c) consumables such as fuses or batteries; (d) cosmetic
damage; (e) transportation, shipping or insurance costs; or (f) costs of product removal, installation, setup
service adjustment or reinstallation.
This warranty gives you specific legal rights, and you may also have other rights which vary from state
to state.
Telemergency Ltd., Customer Relations, Dep't. R, 200 13th Avenue, Suite 16B2, Ronkonkoma, New
York 11779
© Telemergency Ltd.
2LMB37AZ
22
SYSTEM 2 PRO ™
Important Applications:
You are walking through your home..the phone rings….you hear the phone ring or the
name or number that is calling from all System 2 Pro telephone sand can’t get to a phone.
Just one simple press of a pocket-sized wireless remote, you can speak/listen anywhere in
the covered areas of your home without ever picking up a handset.
You need emergency help and can’t get to the telephone....with just one press of the button
you can Call-4-Help to those who can get you help and also speak to each called party(s)
and speak with called party(s), even if you cannot get to a System 2 Pro telephone.
Safety Features:
The ClearVoice telephones used in the System 2 Pro have features which can be life-saving
….If a System 2 Phone (handset) is not hung up, a loud alarm will activate after 30 minutes to
advise you to hang up the handset
….If in using the Speakerphone, user forgot to switch it off, after 30 minutes, the
speakerphone will reset, allowing full use of your telephone.
….In an Emergency, if any System 2 Pro telephone is off hook, when the Telemergency
Emergency Help System is activated, all System 2 Pro phone calls will be terminated
so that the Emergency System can proceed.
System 2 Pro includes
….a telephone system that includes 2 or more technologically advanced feature telephones (code
selected ClearVoice 50B™ and 1- 200B™) telephones that can communicate with
each other and each independently include the renowned Telemergency Help System, extended
distance speakerphone, Talking Caller ID, remote pickup of incoming phone calls plus many
more important features. See individual included telephones for their many features.
Special features of System 2 Pro:
Note: See individual telephone features on back cover
· Hands-free speakerphone throughout your home·
· Hands-free emergency help system throughout your home when you can’t get to the
telephone
· Speak / listen in your home to callers hands-free when you can’t or choose not to get to the
telephone
· No longer need to walk around with a bulky cordless handset which may not be charged up or
worry if you missed an important call.
· Answer incoming calls in your home without picking up a handset
· Hear the name or telephone no of person calling (Caller ID service required)
· Dial a telephone number from the System 2 Pro telephone and activate its
· Fast page feature
· Hands-free extension response
· Paging….allows paged party(s) to respond without using a handset
· Expandable System 2 Pro phones available for larger areas or rooms where coverage is
important
· Easy to Use…System 2 Pro telephones can use existing telephone wiring
· Telemergency Remote Help System (wireless pendant included
· Remote .. identical code wireless pendants supplied with each telephone
Setting up your System 2 Pro telephones
Important: The basic System 2 Pro telephone system is supplied with 2 telephones (ClearVoice 200B and
ClearVoice 50B) and one dual purpose pendant CV200B. Each of the System 2 Pro telephones can be used in
the speakerphone mode for up to 30 feet dependant upon environmental conditions.
Before proceeding: We suggest that you familiarize yourself with the ClearVoice units supplied which make
up the System 2 Pro remote activation speakerphone mode for a range up to 30 feet from any System 2 Pro
unit, dependant upon environmental conditions. Place System 2 Pro telephones about 25-40 feet apart.
(System 2 Pro telephones can each cover an area up to 900 square feet in open space). In typical applications
you may want to place in different rooms, You can utilize existing telephone jacks where
possible. The actual System 2 Pro telephones should be located in areas where you spend most of the most
time and should be separated so that there is no feedback sounds between the phones.
Checking the coverage area
When a call comes into your connected telephone System 2 Pro..you should be able to hear the phone from the
chosen locations and be able to speak hands-free without picking up the handset when you press the wireless
ClearVoice 200B remote to accept the call remotely in those areas, the caller should hear you anywhere in the
selected areas. Note: If you hear feedback, your System 2 Pro telephones should be separated further which
will also increase the range. To increase the range of coverage, move the phones further apart and verify. If
there is a lapse of desired coverage area due to structural or environmental constraints in a specific area, move
phones closer together to cover that area as well, or you may require an additional remote System 2 Pro
telephone with the same selected code.
Using the expanded Hands-free speakerphone and the Telemergency Emergency Help System
Receiving a call remotely:
Your phone rings...you can hear either a) phone ringing, b) callers name or the telephone no.
….press wireless pendant (speaker light on System 2 telephone will begin flashing) and begin
speaking hands-free….
….to terminate call simply press remote button for 2 seconds (You will hear a Beep and
Speaker lights go OFF) to hang up System 2 Pro telephones.
Placing a hands-free call fro a System 2 Pro telephone
….press Speakerphone button (Speaker light will go ON)
.…dial telephone # to be called
Speak to person hands-free
….To terminate call, simply press Speaker button (Speaker light will turn OFF)
Placing a hands-free call from a System 2 Pro telephone and communicate hands-free (leaving the area
covered by one of the System 2 Pro units and entering an area of an additional System 2 Pro telephone
In the following sequence
.…press Speakerphone button (Speaker light will go ON…dial telephone # to be called
Note: If you are at a System 2 Pro telephone and wish to activate the other System 2 Pro
telephone(s)
. .…press EXT (extension) button (Speaker light will flash) on the dialing telephone to activate
the other System 2 Pro speakerphone(s), when call is answered you can begin speaking anywhere in
the range of your System 2 Pro system hands free
.…to terminate call simply press EXT (extension) button for 2 seconds (Beep is heard, Speaker
light Stops flashing) from the phone where call was placed and press Speakerphone button to
turn off phone
Note: To use this feature it is important that remotely activated(s) telephone handsets are not picked up
Placing a call utilizing a System 2 Pro telephone handset
Note: If you want to add a System 2 Pro extension to the call, then
….press EXT button to activate the other System 2 Pro telephone(s).(Speaker light will flash on the
unit) activating the extension(s) to the call. This lets you know you activated the speakerphone
on the other System 2 Pro telephones.
Note: To use this feature it is important that the remotely activated telephone handset(s) are not
picked up)
. …to terminate the call press EXT button for 2 seconds to disconnect the other System 2 Pro
telephones from the call
(Beep will be heard and Speaker light will now be OFF)
Fast Page - utilizing the handset of a System 2 telephone handset:
Note: This is a convenience feature which allows paging for a few seconds instead of
screaming etc. This allows for immediate response because extensions are in hands-free
speakerphone mode.
….Pick up handset
…. press 1 on numeric keypad to break dial tone
.… press EXT button (Speaker light will flash) to activate the other System 2 Pro telephone(s)
speakerphones
…. .fast page the person(s) by speaking into handset for up to a few seconds
Note: To use this feature it is important that the remotely activated handsets are not picked up)
.…press EXT button for 2 seconds to disconnect extensions (Beep is heard and Speaker light
stops flashing)
….hang up handset
USING THE MANY HANDS-FREE
SYSTEM 2 PRO
FEATURES
Speak/listen hands-free anywhere in your home
Fast page utilizing the System 2 Pro Speakerphone:
…press Speakerphone button
....press 1 on numeric keypad to break dial tone
....press EXT button (Speaker light flashes) to activate the other System 2 telephone(s)
speakerphones…
page the person(s) by speaking into handset for a few seconds
....to disconnect press EXT button for 2 seconds (Beep is heard Speaker light stops flashing)
….Press Speaker button to disconnect (Speaker light goes out)
Note: To use this feature it is important that the remotely activated handset(s) are not picked up)
Wireless pendant can call for Emergency Help
and allow you to speak to called party(s)
Safety features by Telemergency™
Using your System 2 Pro telephones to get you Emergency Help.
Important: Before using this feature it is important that you follow all the directions in ClearVoice 50B,
100B and 200B User Manual section “Using the Emergency Features” on each of the System 2 Pro
telephone(s)
Note; To fully use the System 2 Pro Emergency Help System it is important that the Emergency message
and the Emergency #s to be called should be entered identically in each System 2 Pro telephone.
Consumer Helpline 1-888-558-7420
Activating the Telemergency Emergency Help System
…Press and hold down the Remote pendant button for 4 seconds until light flashes on the pendant (or
press (+) button on nearest System 2 phone for 4 seconds) to activate Emergency System until beeping is
heard. All System 2 Pro compatible code-selected System 2 Pro telephones will be activated.
Important: Please read individual User Manual forSystem 2 Pro telephones before proceeding

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Company                         : PMX
Source Modified                 : D:20061128215733
Creator Tool                    : Acrobat PDFMaker 7.0.7 for Word
Modify Date                     : 2007:05:03 16:38:43+08:00
Create Date                     : 2006:11:28 16:57:50-05:00
Metadata Date                   : 2007:05:03 16:38:43+08:00
Document ID                     : uuid:cf62647f-96bc-4419-ab1d-cec29ad79589
Instance ID                     : uuid:7dcd62c2-25f1-4e85-9b68-d75a334266b6
Version ID                      : 2
Format                          : application/pdf
Title                           : 1
Creator                         : soft04
Subject                         : 
Headline                        : 
Has XFA                         : No
Page Count                      : 25
Page Layout                     : OneColumn
Author                          : soft04

EXIF Metadata provided by EXIF.tools