Primatronix SH200 Remote Controller of Navigation and Information Reference Point System User Manual Manual Draft

Download:
Mirror Download [FCC.gov]
Document ID	1271273
Application ID	2l7rkhs5pjIPULuj0Xn1tA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	49.33kB (616640 bits)
Date Submitted	2010-04-22 00:00:00
Date Available	2010-04-22 00:00:00
Creation Date	2010-03-10 11:28:14
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2010-04-16 10:31:08
Document Title	Manual Draft
Document Creator	Acrobat PDFMaker 7.0 for Word
Document Author:	Billgates

Model:STEPHEAR
What’s Included for AC Power version
Base Unit with AC Power Cable
Activator / Charger / Power Supply
Wall Mounting Bracket / Screw Driver / Screws
User’s Guide
What’s Included for Solar Panel version
Base Unit
Solar Panel with Cable
Activator / Charger / Power Supply
Wall Mounting Bracket / Pole Bracket / Screw Driver / Screws
User’s Guide
Instruction Manual
Thank you for purchasing this unit, while using or installing it, please read this instruction
manual carefully.
Location of controls
10
11
13
12
14
ACTIVATOR & CHARGER
16
BASE UNIT
1. AC cable for AC unit
2. LED indicator
Message playing/White
Battery low/Red
Charging/Red
Battery fully charged/Green
3. Speaker
4. Button 1
5. Button 2
6. Button 3
7. DC socket
8. Audio socket
9. Additional flash LED socket
10. Key 1
11. Key 2
12. LED indicator
13. Key 3
14. Power ON/OFF button
15. Charger
16. Solar Pole
Wall mounting
Your unit is suitable for wall mounting. Use two screws for fixing. Drill two holes horizontally
one above the other, 80mm apart, and leave the screws protruding from the wall by 5mm,
please see below:
AC Power Version
Solar Panel Version
BASE UNIT
Connect the AC Power cable into an electric outlet socket.
Recording message
1. Hold button 2&3 for 2 seconds at the same time to toggle recoding on/off, while the
white LED flash once it means your recording is set to on and two times is off.
2. Press and hold button 1/2/3 and speak clearly when you hear a beep tone, the
message can be up to 10 minute long.
3. Release the button 1/2/3, the base unit will play the recorded message automatically.
You can press button 1/2/3 at any time to listen the message.
with an optional audio unit
1. Connect the audio cable to the socket on the back side of the unit.
2. Hold button 2&3 for 2 seconds at the same time to activate the recoding.
3. Press and hold button 1/2/3 and turn on your audio unit when you hear a beep tone to
start recording the sound voiced from the audio (up to 10 minutes).
4. Release the button 1/2/3, the base unit will play the recorded message automatically.
You can press button 1/2/3 at any time to listen the message.
Please Note: Please set your recording to OFF after recorded your message.
Volume setting
While playing message, you can set the volume to a more comfortable listening level:
press button 1 to set your playback volume to Low/Mid/High, and press button 3 to set your
playback volume to High/Mid/Low.
Note: The playback volume will be set to higher in noise environment and to lower
listening level in quiet environment automatically.
Remote range setting
Hold down button 1&2 at the same time for 2 seconds, the white LED will light, then press
one of the 3 buttons to determine the range (the default range is 5-7m):
Button 1 : 3-5m
Button 2 : 5-7m
Button 3: 7-9m
Hold down button 1&2 again to exiting range setting mode.
Note: The ranges quoted are for indication only and will vary according to local conditions
and environment.
ACTIVATOR
Turn the activator On/Off
To turn the activator ON, press and hold the POWER key on the activator for 2-4 seconds
until a beep tone is heard. To turn the activator OFF, press and hold the POWER key for
2-4 seconds again, until two beep tones are heard. The red LED indicator will flash.
Activator default set is beep & vibrate on.
Turn the beep tone OFF
1. Press and hold the POWER key to turn on the activator.
2. Press and hold the activator key 1&3 together for 5 seconds until a beep tone is heard.
The activator will only vibrate.
3. To turn the beep ON, press and hold the key 1&3 together again until you hear a beep
tone. The activator will vibrate and beep.
The activator keeps the latest settings until a new setting is received.
Pause mode
1. Press the POWER key once to pause the vibrating and beeping. Only the vibrator will
work every 60 seconds. If the activator is out of range for 15 seconds, it will revert to
normal operation mode automatically.
2. Press the POWER key once again at any time to resume normal activator operation.
Checking the message with the Activator
1. Press key 1/2/3 once on the activator.
2. The corresponding message stored in button 1/2/3 will be heard.
Charging your activator
1. Plug the supplied AC adaptor cord into the jack on the back of the charger, and the
other end into an electrical outlet.
2. Place your activator into the charger, the green LED lights and the activator vibrates
and beeps once. The green LED will turn off when the activator is fully charged.
Please note: When the green LED on the activator flashes and a tone beeps every 60
seconds, you need to charge the activator. The approximate charging time for the activator
is about 2 hours.
External Flash and Buzzer:
If message start playback by activator, the external white LED will flash and the buzzer will
beep. Press the LENS button will stop the flash and the buzzer.
FCC Caution:
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
For more information please visit: www.step-hear.com
Or contact: info@step-hear.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
Page Count                      : 6
Page Layout                     : OneColumn
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:99279c5f-11fd-4441-96fc-dcbec3a330cb
Producer                        : Acrobat Distiller 7.0 (Windows)
Tag Email Subject               : Gift boxes for print
Tag Author Email Display Name   : Yael Furman
Tag Author Email                : yael@step-hear.com
Tag Ad Hoc Review Cycle ID      : 568492681
Company                         : Microsoft
Source Modified                 : D:20100310032803
Headline                        : 
Create Date                     : 2010:03:10 11:28:14+08:00
Creator Tool                    : Acrobat PDFMaker 7.0 for Word
Modify Date                     : 2010:04:16 10:31:08-07:00
Metadata Date                   : 2010:04:16 10:31:08-07:00
Document ID                     : uuid:e403e08d-6f12-45e8-9050-8b72c809905d
Instance ID                     : uuid:812006e4-c9a7-4d95-910b-19133200cb3c
Version ID                      : 7
Format                          : application/pdf
Title                           : Manual Draft
Creator                         : Billgates
Subject                         : 
Tagged PDF                      : Yes
Author                          : Billgates

EXIF Metadata provided by EXIF.tools