Primax Electronics K305BX Rocketfish Bluetooth Keyboard User Manual Combo UM

Primax Electronics Ltd Rocketfish Bluetooth Keyboard Combo UM

Manual

Bluetooth Keyboard and Mouse Combo SetUser ManualInsert PageUpPageDownDelete EndHome*_/NumLockHome798PgUp+465EnterEnd1Ins0Del.3PgDn2--QP{[{[\WERTYUIOTabBackspace+=_-)(*& ^%$#@!~`1023456789EnterCaps Lock:;"'ASDFGHJ KL/ZXCVBNM<,.>? ShiftShiftCtrlAlt Alt CtrlPrt ScrScreenScrollPauseBreak LockEscF1F2F3F4F5F6F7F8F9F10F11F12
Bluetooth Keyboard and Mouse Combo SetFCC Compliance StatementThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to Part 15 of the FCC Rules. Theselimits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, usesand can radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference willnot occur in a particular installation. If this equipment does causeharmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouragedto try to correct the interference by one of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subjectto the following two conditions: (1) This device may not cause harmfulinterference, and (2) this device must accept any interference received,including interference that may cause undesired operation.FCC Caution: Any changes or modifications not expressly approved bythe party responsible for compliance could void the user's authority tooperate this equipment.IMPORTANT NOTE:FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth foran uncontrolled environment. End users must follow the specificoperating instructions for satisfying RF exposure compliance.This transmitter must not be co-located or operating in conjunction withany other antenna or transmitter.Canada-Industry Canada(IC)Operation is subject to the following two conditions: 1) this device maynot cause interference and 2) this device must accept any interference,including interference that may cause undesired operation of the device.
Bluetooth Keyboard and Mouse Combo SetAbout this manualThank you for your purchase of this Bluetooth keyboard and mouse combo set. This topics covered in this manual are listed as following.FIntroductionFInstalling the BatteriesFInstalling and Uninstalling the WIDCOMM Bluetooth StackFSetting up the Keyboard and Laser MouseFUsing the Mouse SoftwareFUsing the WIDCOMM Bluetooth StackFTroubleshooting
Bluetooth Keyboard and Mouse Combo SetContentsIntroduction ................................................ 1Package List .....................................................................1Features ...........................................................................2Product Views ..................................................................3Installing the Batteries ................................... 6Keyboard ..........................................................................6Laser Mouse .....................................................................7Installing and Uninstalling the WIDCOMM Bluetooth Stack ......................................................... 8Installing the WIDCOMM Bluetooth Stack ........................8Uninstalling the WIDCOMM Bluetooth Stack .................12Setting up the Keyboard and Laser Mouse .......... 13Automatic Pairing in Boot Mode .....................................13Quick Pairing in Windows ...............................................15Pairing on WIDCOMM Bluetooth Stack ..........................16Using the Mouse Software .............................. 18Installing the Bluetooth Mouse Software ........................18Uninstalling the Bluetooth Mouse Software ....................19Adjusting the Tilt/ Scroll Wheel Speed ...........................19Using the WIDCOMM Bluetooth Stack .................21Using the Stack for the First Time ..................................21Connecting to the other HID Devices .............................22Troubleshooting .......................................... 23
Bluetooth Keyboard and Mouse Combo Set11 Introduction1.1 Package ListBefore you start using the set, check the following contents in your package. If anything is missing, contact your retailer.Keyboard Batteries for the keyboard and mouseLaser Mouse USB Bluetooth dongleUser ManualEsc F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12Prt ScrScreenInsertBackspaceEnterEnterAltCtrlCaps LockTabAlt CtrlPageUpPageDown+=_---)(**& ^%$#@!~`_/+DeleteScrollEndHomeHome798End11023456789QP{[{[\/WE R T Y U I OA:;"'SDFGHJ KLZXCVB NM<,.>? Ins0Del.4PgUp3PgDnNumLock652Shift ShiftPauseBreak LockUser Manual
Bluetooth Keyboard and Mouse Combo Set21.2 FeaturesKeyboard/ Laser Mouse• Keyboard- 104-key design- Ten frequently used hotkeys- One connect button• Laser mouse- Tilt/ scroll wheel- Three mouse buttons (Left, right, and middle buttons)- Four media key buttons- One pairing button• Power saving mode• Excellent performance working range up to 10 meters (line-of-sight)• Power saving mode• Dual color status LED indicatorUSB Bluetooth Dongle• One pairing button• Bluetooth specification v1.0 and v2.0 compliant• Supports both keyboard and mouse• Supports additional Bluetooth devicesSystem Requirements• Bluetooth/USB keyboard & mouse supported computer• Microsoft Windows 2000, XP or later• WIDCOMM Bluetooth software version 5.0• Bluetooth Mouse software for configuring the scrolling speed
Bluetooth Keyboard and Mouse Combo Set31.3 Product ViewsKeyboardNo Icon Description No Icon Description1 Left button 7 Stop button2 Rewind button 8 Fast Forward3Tilt/ Scroll Wheel button 9Rewind4 Fast Forward button 10 Mute5 Play/ Pause button 11 Status LED6 Fast Forward button 12 Connect Connect buttonEsc F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12Prt ScrScreenInsertBackspaceEnterEnterAltCtrlCaps LockTabAlt CtrlPageUpPageDown+=_---)(**& ^%$#@!~`_/+DeleteScrollEndHomeHome798End11023456789QP{[{[\/WE R T Y U I OA:;"'SDFGHJ KLZXCVB NM<,.>? Ins0Del.4PgUp3PgDnNumLock652Shift ShiftPauseBreak Lock1234567891011connect11
Bluetooth Keyboard and Mouse Combo Set4Laser Mouse No Description1 Left button2 Rewind button3 Tilt/ Scroll Wheel button4 Fast Forward button5 Play/ Pause button6 Fast Forward button7 Stop button8 Status LED9 Pairing button• The keyboard hotkeys and the mouse media key buttons are disabled by default. To use these hotkeys and buttons, you need to install the Bluetooth WIDCOMM stack as described in “3 Installing the WIDCOMM Bluetooth Stack” on page 8.• To enable the horizontal scrolling, you need to install the Bluetooth Mouse software on your computer. See “5.1 Installing the Bluetooth Mouse Software” on page 18 for more information.81234567OFFONConnect9
Bluetooth Keyboard and Mouse Combo Set5LED StatusTo view more detailed information on the keyboard/ mouse battery status, go to the Control panel > Keyboard > Bluetooth or Control panel > Mouse > Bluetooth. If you want to change the settings for low battery alarm, click the Low Battery Alarm button to open the following screen.Change the settings according to your preferences.LED Color DescriptionKeyboard/ Mouse LEDGreen Mouse is turned on, battery level normal.Flashing red Low battery.Flashing red and green Mouse/ Keyboard pairing.
Bluetooth Keyboard and Mouse Combo Set62 Installing the BatteriesThe keyboard and mouse both need two AA Alkaline batteries. Follow the steps below to install the batteries.2.1 Keyboard1. Remove the battery cover as shown.2. Install two "AA" batteries while observing the polarity (+ and -) marks indicated inside the compartment.3. Replace the battery cover.123
Bluetooth Keyboard and Mouse Combo Set72.2 Laser Mouse1. Press the tab to release the battery cover.2. Install two "AA" batteries while observing the polarity (+ and -) indicated inside the housing.3. Replace the battery cover.123p
Bluetooth Keyboard and Mouse Combo Set83 Installing and Uninstalling the WIDCOMM Bluetooth Stack3.1 Installing the WIDCOMM Bluetooth StackBefore installing the WIDCOMM Bluetooth stack, plug the USB Bluetooth dongle into a USB port of your computer.1. Insert the provided Installation CD in the CD ROM drive.2. The installation stack loads automatically. If not, click the Setup.exe in the bin folder of the CD ROM.3. The welcome screen introduces you to the installation process. Click Next to continue.
Bluetooth Keyboard and Mouse Combo Set94. Read the agreement and select “I accept he terms in the license agreement”. Click Next to continue.5. The program will be installed in the folder as shown. Click Change to install in a different location. Click Next to continue.
Bluetooth Keyboard and Mouse Combo Set106. Click Install to start the installation. The installation may need some time to complete.The Found New Hardware Wizard starts installing the components for the USB Bluetooth dongle.If the “Bluetooth device not found” message appears, plug the USB Bluetooth dongle into a USB port of your computer and click OK.
Bluetooth Keyboard and Mouse Combo Set117. The following screen appears to indicate the installation is complete.8. Remove the dongle and plug it back in, the keyboard and mouse will pair automatically. Click Finish to exit the installation.The following prompt requires you to restart the computer so that the Bluetooth stack takes effect. Click Yes to restart your computer now or No to restart later. (for Windows 2000 only)
Bluetooth Keyboard and Mouse Combo Set123.2 Uninstalling the WIDCOMM Bluetooth StackFollow the steps below to uninstall the WIDCOMM Bluetooth stack from your computer.1. Remove the USB Bluetooth dongle.2. Click Start > Settings > Control Panel > Add/Remove Programs.3. Select WIDCOMM Bluetooth Software from the program list and click Remove.4. A confirmation message appears. Click Yes to uninstall or No to cancel.5. When the program has been removed, a prompt requires you to restart the computer. Click Yes to restart your computer now or No to restart later.
Bluetooth Keyboard and Mouse Combo Set134 Setting up the Keyboard and Laser Mouse4.1 Automatic Pairing in Boot ModeFollow the steps below to enable the keyboard and mouse in boot mode.1. Plug the USB Bluetooth dongle into one of USB ports before starting your computer.2. Now slide the power switch of the mouse to turn the mouse on.3. Press the button on the bottom of the USB Bluetooth dongle until the LED begins to flash once every second. This indicates the Bluetooth dongle has started to search for device to be paired.4. The Bluetooth connection is established. Turn on the computer and use the keyboard to enter the BIOS setup.5. Follow the on-screen instructions to enter the BIOS setup screen.12
Bluetooth Keyboard and Mouse Combo Set146. Use the keyboard/mouse to view the menu and configure the settings.Enabling the function of USB keyboard/mouse in BIOSIf the keyboard/mouse failed to work (refer to “7 Troubleshooting” on page 23 for more probable conditions), check that the USB func-tion of the keyboard/mouse has been enabled in the BIOS setup.1. Before turning on your computer, make sure the Bluetooth connection has been established.2. Turn on your computer and follow the on-screen instructions to enter the BIOS setup.3. Use the cursor keys on the keyboard to navigate through the menu items and enable the USB function for USB keyboard and mouse. (In some BIOS settings, you can use the Bluetooth mouse to navigate through the items.)Some old PC systems do not support the USB keyboard/mouse in BIOS/DOS environment.
Bluetooth Keyboard and Mouse Combo Set154.2 Quick Pairing in WindowsThe Bluetooth keyboard and mouse has been set to a pre-pairing mode as the factory default. For quick pairing, enable the pre-pairing mode following the steps below.1. Plug the USB Bluetooth dongle into a USB port of your computer.2. For the mouse, press the pairing button at its bottom.For the keyboard, press the connect button on the back of the keyboard for two seconds.3. Press the button on the bottom of the USB Bluetooth dongle until the LED begins to flash once every second. This indicates the Bluetooth dongle has started to search for device to be paired.4. Press any key on the keyboard and move your mouse to ensure they are connected.The first time you connect the keyboard or mouse to your computer, the Found New Hardware Wizard will automatically launch. Cancel the Wizard and follow the steps below.• When pairing, the keyboard/mouse LED lights red and green in turn.• The pairing settings will be cancelled if you press the mouse pairing button or the keyboard connect button. To reconnect the mouse or keyboard, press the USB Bluetooth dongle button again (Refer to the step3 above).Each time you turn on your computer, the keyboard and mouse will be automatically detected.USB Bluetooth dongle button
Bluetooth Keyboard and Mouse Combo Set164.3 Pairing on WIDCOMM Bluetooth StackBefore using the Bluetooth stack for keyboard and mouse pairing, make sure of the following:- The WIDCOMM Bluetooth stack is installed and set up as instructed in “3 Installing and Uninstalling the WIDCOMM Bluetooth Stack” on page 8.- The batteries are inserted properly and fully charges.- The USB Bluetooth dongle is plugged into a USB port of your computer.- The mouse is switched on.1. Press the Connect button on the mouse and keyboard to start pairing.2. Press the USB Bluetooth dongle button until the following Human Interface Device (HID) screen appears. It starts to search for all Bluetooth devices.To start the Bluetooth stack for the first time, see “6 Using the Stack for the First Time” on page 21 for more information.
Bluetooth Keyboard and Mouse Combo Set173. When the mouse is connected, the following confirmation message appears. Click to confirm that the correct mouse is connected.4. When the keyboard is connected, the following screen appears. Use the paired keyboard to type the digits shown on the screen and press the Enter key. The keyboard is then connected.The Bluetooth security code changes each time the keyboard is connected.The keyboard/mouse will enter the power saving mode when not used for a period of the time.
Bluetooth Keyboard and Mouse Combo Set185 Using the Mouse Software5.1 Installing the Bluetooth Mouse SoftwareBefore installing the Bluetooth Mouse software, make sure the WIDCOMM stack has been installed on your computer. Then plug the USB Bluetooth dongle into an available USB port of your computer.1. Insert the provided Installation CD in the CD ROM drive.2. The software starts automatically. If not, click the Setup.exe in the bin folder of the CD ROM.3. The welcome screen introduces the installation process. Click Next to continue.4. The setup program will install the program files into the folder as shown. You may click Browse to install the program files to a different location. After you choose a installation directory, click Next.
Bluetooth Keyboard and Mouse Combo Set195. Once installed, you will be prompted to restart your computer before using the Bluetooth Mouse Software.5.2 Uninstalling the Bluetooth Mouse SoftwareFollow the steps below to uninstall the Bluetooth Mouse software from your computer.1. Remove the USB Bluetooth dongle.2. Click Start > Settings > Control Panel > Add/Remove Programs.3. Select Bluetooth Mouse from the program list and click Remove.A confirmation message appears. Click Yes to uninstall or No to cancel.5.3 Adjusting the Tilt/ Scroll Wheel SpeedYour mouse comes with an advanced scroll wheel that enables horizontal window scrolling as well as vertical.To adjust the scrolling wheel speed, click the Mouse icon in the system tray or right-click to view the context menu, and then click Adjust Property.
Bluetooth Keyboard and Mouse Combo Set20Scroll SpeedYou can specify the speed at which the screen will scroll when using the scroll wheel function.1. Select Scroll x lines per notch or Scroll one screen per notch.2. Click OK to have your changes take effect.Horizontal ScrollingTo configure the speed of the tilt scroll wheel, do the following:1. Move the slide towards Slow or Fast to adjust the scroll speed.2. Click Use Default to restore the horizontal scrolling speed to its default setting.3. Click OK to have your changes take effect.Scroll x lines per notchSelect to set the number of lines to scroll when the scroll wheel is moved one notch. Specify the number of lines with the up and down arrows.Scroll one screen per notchSelect to scroll the entire window when the scroll wheel is moved one notch (i.e. page up/down).
Bluetooth Keyboard and Mouse Combo Set216 Using the WIDCOMM Bluetooth Stack6.1 Using the Stack for the First TimeTo start using the Bluetooth Stack, double click the Bluetooth icon in the system tray. 1. The Initial Bluetooth Configuration Wizard will launch. Follow the instructions on screen to complete the configuration.2. When the Bluetooth Configuration is complete, the following HID screen appears and starts to search for Bluetooth devices.3. Click on the HID device you want to connect with. Then follow the instructions on-screen to enable the selected device.
Bluetooth Keyboard and Mouse Combo Set22About the Bluetooth iconThe Bluetooth icon acts as an indicator for dongle status.1. A red icon indicates there is no dongle inserted.2. A white icon indicates the dongle is plugged in.3. A green icon indicates the dongle has detected the HID devices.6.2 Connecting to the other HID DevicesBesides the mouse and keyboard, the Bluetooth Stack also allows you to connect to other Bluetooth devices. 1. Make sure the USB Bluetooth dongle has been plugged onto your computer.2. Set the Bluetooth devices, such as printers, modems, and PDAs, you want to connect to the Bluetooth stack.3. Press the USB Bluetooth dongle button until the following HID screen appears.4. Select the type of devices to search for from the drop-down menu.5. The detected devices will be displayed. Click on a device and the stack will instruct you to enable the connection.
Bluetooth Keyboard and Mouse Combo Set237 TroubleshootingIf you have any problems with your Bluetooth keyboard or mouse, please check the following:• Check the system requirements to make sure that your system is compatible.• Check to see if the batteries in the keyboard and mouse are installed correctly. Make sure the polarity of the batteries corresponds with the polarity signs inside the keyboard and mouse battery compartments.• When the mouse LED is lit red, it indicates battery power low. Replace them with new batteries immediately.• Once the Bluetooth stack (see “Installing the WIDCOMM Bluetooth Stack” on page 8) has been installed in your computer, you can check the battery status of keyboard and mouse from Control Panel > Keyboard > Bluetooth or Control Panel > Mouse > Bluetooth.• If the keyboard and mouse fail to work, check the USB keyboard and mouse functions in your system’s BIOS. The functions should be enabled for the normal use of keyboard and mouse. For detailed setting, refer to “Enabling the function of USB keyboard/mouse in BIOS” on page 14.• If your PC system’s BIOS setup has options for the keyboard or mouse, make sure they are set to default settings. If you are not familiar with the BIOS, refer to your PC’s manual for more information.• Only use the mouse on a clean, flat, non-slippery surface in order to ensure smooth and accurate cursor action. If you use a mouse-pad, choose a light-colored one, not a dark one, to use less battery power.For further assistance with any other questions you may have, please contact your dealer for technical support.

Navigation menu