Primax Electronics KKBRF1921 2.4G Wireless Keyboard User Manual KBRF1921 manual for CE Modify

Download:
Mirror Download [FCC.gov]
Document ID	1099556
Application ID	HEp3MAzlyJdh23kIF1SnMA==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	8.37kB (104580 bits)
Date Submitted	2009-04-21 00:00:00
Date Available	2009-04-21 00:00:00
Creation Date	2009-04-14 18:44:18
Producing Software	pdfFactory Pro 3.10 (Windows XP Professional Chinese)
Document Lastmod	2009-04-15 09:54:13
Document Title	KBRF1921 manual for CE-Modify.doc
Document Creator	pdfFactory Pro www.ahasoft.com.tw/FinePrint
Document Author:	emily

HP
2.4G Wireless Keyboard
USRE MANUAL
KBRF1921
Page 1 of 6
User’s Quick Guide
This guide will take you through all the functions of the Keyboard and explain how to configure them using the
Keyboard.
Introduction
Congratulations on your purchase of the HP 2.4G Wireless Keyboard
Model: KBRF1921.
Package Contents
•
Wireless Keyboard x 1
•
USB Adaptor ( to operate in coordination for Dongle model : MORFDIUO-D )
•
AA Alkaline Battery x 2
•
User’s Guide x 1
PC Requirements
•
Pentium processor or equivalent
Operating System: Windows® XP with Service Pack 1 or higher, Windows® Vista.
Setup
HP 2.4G Wireless Keyboard
• Please take off the battery cover and then put 2 AAA alkaline batteries in the battery compartment. Please
note batteries are fitting with correct electrode that shows on the inner side of battery cover.
•
Plug in adaptor to computer USB port.
•
Press “ Connect “ button to Setup the Keyboard and Adapter ( Dongle ) connection .
Page 2 of 6
USB adaptor and Keyboard will automatically connection after Adaptor plug into PC after few seconds.
Battery indication
When the Keyboard power is turned on:
Full Battery while Power On, the Green LED would be turned ON around 3 seconds then Off.
Low Battery, the Red LED would be turned On around 3 seconds then Off.
Extreme low battery, there would be no LED indicator and the mouse wouldn't work.
When the Keyboard is working and low battery situation is detected,
If it is at low battery, the Red LED would flash one times per second and the warning duration would be
60 seconds when the Keyboard is STOP typing.
If it is at extreme low battery, the power to the Keyboard will shut down.
Page 3 of 6
Troubleshooting
Question: My mouse is not working. What should I do?
Answer: Check if the Adapter ( Dongle ) is plugged in correctly to your computer's USB port. A loose
connection may result in the computer not being able to detect the device.
If your Keyboard is connected to a hub or multi-port USB connector, unplug the device and plug it directly into
your computer's USB port, ensuring there is no interference caused by these devices.
Other system devices, such as PC cards, may cause conflicts that prevent your Keyboard from working
properly. Check the settings of these devices and make any changes as necessary. Reboot your computer
and re-attach the Keyboard.
Question: The Keyboard pointer is not moving. What should I do?
Answer: Ensure all setup procedures have been followed correctly. If software and drivers have already been
installed, remove these, reboot your computer and re-install.
Ensure that batteries are not out of power. Replace batteries if necessary.
Battery Notice:
•
Press any button to wake up the Keyboard while the Keyboard is in the standby mode.
•
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
Page 4 of 6
FCC Statement
Federal Communications Commission (FCC) requirements, Part 15. This equipment has been tested and
found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Any changes of modifications not expressly approved by the grantee of this device could void the user’s
authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End
users must follow the specific operating instructions for satisfying RF exposure compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
NOTE:
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE
USER'S AUTHORITY TO OPERATE THE EQUIPMENT.
Page 5 of 6
CE Statement
CE Declaration Of Conformity Hereby, the manufacturer, declares that this s Mouse Wireless Presenter in
compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Essential
requirements
-- Article 3 Protection requirements for health and safety - Article 3.1a
--Testing for electric safety according to EN 60950 has been conducted. These are considered relevant and
sufficient. Protection requirements for electromagnetic compatibility - Article 3.1b
--Testing for electromagnetic compatibility according to EN 301 489-1 and EN 301 489-3 has been conducted.
These are considered relevant and sufficient Effective use of the radio spectrum -Article 3.2
--Testing for radio test suites according to EN 300 440-2 has been conducted. These are considered relevant
and sufficient.
IC Statement
Operation is subject to the following two conditions: 1) this device may not cause interference and 2) this
device must accept any interference, including interference that may cause undesired operation of the device.
Page 6 of 6

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
XMP Toolkit                     : 3.1-701
Create Date                     : 2009:04:14 18:44:18+08:00
Creator Tool                    : pdfFactory Pro www.ahasoft.com.tw/FinePrint
Modify Date                     : 2009:04:15 09:54:13+08:00
Metadata Date                   : 2009:04:15 09:54:13+08:00
Format                          : application/pdf
Creator                         : emily
Title                           : KBRF1921 manual for CE-Modify.doc
Producer                        : pdfFactory Pro 3.10 (Windows XP Professional Chinese)
Document ID                     : uuid:0aa4a2b5-9ee5-4220-983d-2308681fe96e
Instance ID                     : uuid:4ee07ed7-8708-41c6-a4b4-15bf94132644
Page Count                      : 6
Author                          : emily

EXIF Metadata provided by EXIF.tools