Primax Electronics KKBRF36211 Wireless Keyboard User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1337754
Application ID	A6yA30gr2xmcSfyQfTNNHA==
Document Description	UserMan_EMJKKBRF36211
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	14.93kB (186658 bits)
Date Submitted	2010-09-03 00:00:00
Date Available	2010-09-03 00:00:00
Creation Date	2010-09-02 10:44:00
Producing Software	pdfFactory Pro 3.10 (Windows XP Professional Chinese)
Document Lastmod	0000-00-00 00:00:00
Document Title	user manual.doc
Document Creator	pdfFactory Pro www.ahasoft.com.tw/FinePrint
Document Author:	EMILY

Thank you for choosing this 2.4G Wireless Keyboard and Mouse Kits. It operates with digital radio technology
to ensure no hinder communication between the keyboard, the mouse and your computer without connecting
cable.
The transmission and receiving of keyboard and mouse are free from angle restriction.
Preparing Keyboard, Mouse and Dongle
Before working with your new keyboard and mouse, look at the "Hardware Installation", and take a few
one-time preparations.
Hardware Installation
●
Place the dongle at least 20 cm from other electrical devices (e.g. monitor) to achieve optimum
performance.
●
The distance between the keyboard, mouse and dongle should not exceed 10 M.
●
Do not place the dongle on metal surfaces.
●
Do not move optical mouse on following surface
- Glass or any transparent materials
- Dark surface
- Mirror or reflecting surface
- Mouse pad with too many colors
- Rough surface.
Step 1: Connect the Dongle
● Plug the dongle connector into an USB port.
● SYSTEM will take around 10 sec to find your keyboard and mouse automatically.
Step 2: Inserting battery in mouse
● The mouse requires one alkaline AA battery.
● Remove the battery compartment cover on the bottom of the mouse
● First push the battery puller in then insert one AA battery into battery compartment.
● Close the battery compartment cover.
Step 3: Inserting batteries in keyboard
●The keyboard requires two alkaline batteries (AAA).
● Insert two AAA batteries.
● Close the battery compartment cover.
CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to
instructions.
Refer to "Important Battery Information" for disposal instructions.
Working with keyboard and mouse
The following sections contain information on using the keyboard and the mouse.
Mouse
In addition to two buttons, the mouse also has a wheel that can be used as follows:
● As a 3rd button: press on the wheel.
● For scrolling, e.g. in documents or on Internet pages: turn the wheel forward or back.
Keyboard
The following description of keys applies for the operating systems that support these functions
(e.g. Windows 2000/XP/Vista/Windows 7).
Vista Key
Application key
Press Vista key to open Start Manu
Press Application key is same as Right Mouse key to open
function Menu
Previous Track
Combine keys to skip to the forward title in the active player.
Play/Pause
Combine keys to Start or Pause the soundtrack in active player.
Stop
Combine keys to end the soundtrack or video.
Next Track
Combine keys to skip to the next title in the active player.
My Computer
Open My Computer folder.
Mute
Press this key to On/Off the volume.
Volume down
Press this key to decreasing the volume.
Volume Up
Press this key to increasing the volume.
Sleep
Enters sleep mode
IE7 QuickTab
Opens the Internet Explorer 7 QuickTab feature
E mail
Opens E mail
Internet Explorer
Opens Internet Explorer
Low Battery Instruction
a. Keyboard battery indicator
The battery indicator on the screen shows you the status of the batteries. If the battery indicator lights up
when a key is pressed, the batteries are gradually becoming weaker. Replace them in the near time
b. Mouse battery indicator
The battery indicator on the screen shows you the status of the batteries. If the battery indicator lights up
when you are using the mouse, the batteries are gradually becoming weaker. Replace them in the near time.
Troubleshooting and tips
The keyboard or mouse does not operate following installation or is not recognized.
●
Make sure that the batteries have been inserted correctly according to the polarity and the dongle is
well connected.
●
Check that your USB port is configured properly.
●
Make the connection between the dongle, keyboard and mouse. Follow “Hardware Installation”/“Step
3”/Connection.
●
Make sure the batteries are not too weak.
●
Remove the batteries from the device. Please press any button on the device several times to prevent
any unexpected failure after batteries being put in.
●
Change the location of the dongle to have a best sensitivity.
●
To determine whether the keyboard, mouse or computer causes the problem test the keyboard and
mouse on another computer if possible; or test another keyboard and mouse on your current computer.
If you are still unable to solve the problem, please contact your point of sale or your dealer.
If you need to exchange the keyboard, please note that you must return it to your dealer in its original
packaging and also a produce proof of purchase (receipt). Keep your receipt in a safe place after purchase.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications.
installation.
However, there is no guarantee that interference will not occur in a particular
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End
users must follow the specific operating instructions for satisfying RF exposure compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
IC Statement
Operation is subject to the following two conditions: 1) this device may not cause interference and 2) this
device must accept any interference, including interference that may cause undesired operation of the device.
低功率電波輻射性電機管理辦法:
第十二條
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更設
計之特性及功能。
第十四條
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干
擾時方得繼續使用。
前項合法通信，指依電信法規定作業之無線電通信。
低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
INFORMATION FOR OPTICAL POINTING DEVICES ONLY:
This product has been tested to comply with international Standard IEC 60825-1:(1993), incid. Amd.2(2001).
This product uses LEDs that are inherently Class 1.
IMPORTANT BATTERY INFORMATION
●
Keep batteries out of reach of children.
●
Insert the batteries in the proper direction as indicated by the positive (+) and negative (-) markings in
the battery compartment.
●
Do not mix old and new batteries or batteries of different types (for example, carbon and alkaline
batteries).
●
Always remove old, weak, or worn-out batteries promptly and recycle or proper disposal of them in
accordance with Local and National Disposal Regulations.
●
If a battery leaks, remove all batteries and recycle or dispose of them in accordance with the battery
manufacture's instructions and Local and National Disposal Regulations. Before inserting new batteries,
thoroughly clean the compartment with a damp paper towel, or follow the battery manufacture's
recommendations for cleanup. If fluid from the battery comes into contact with skin or clothes, flush skin
with water immediately.
●
Remove the batteries if your device is to be stored for an extended period of time without being used.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Fill forms
Title                           : user manual.doc
Author                          : EMILY
Creator                         : pdfFactory Pro www.ahasoft.com.tw/FinePrint
Producer                        : pdfFactory Pro 3.10 (Windows XP Professional Chinese)
Create Date                     : 2010:09:02 10:44:00+08:00
Page Count                      : 6

EXIF Metadata provided by EXIF.tools