Primax Electronics KKBRF3871 2.4G Wireless Keyboard User Manual KBRF3871 manual

Primax Electronics Ltd 2.4G Wireless Keyboard KBRF3871 manual

User Manual

Download: Primax Electronics KKBRF3871 2.4G Wireless Keyboard User Manual KBRF3871 manual
Mirror Download [FCC.gov]Primax Electronics KKBRF3871 2.4G Wireless Keyboard User Manual KBRF3871 manual
Document ID1404509
Application ID8rzCO2eSuA0lFtv+wwpj1Q==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize2.16kB (27013 bits)
Date Submitted2011-01-13 00:00:00
Date Available2011-01-13 00:00:00
Creation Date2011-01-11 16:19:28
Producing SoftwareAFPL Ghostscript 8.54
Document Lastmod2011-01-12 11:32:51
Document TitleKBRF3871 manual
Document CreatorPDFCreator Version 0.9.2
Document Author: EMILY

2.4G Wireless Keyboard USRE MANUAL
KBRF3871
User’s Quick Guide
This guide will take you through all the functions of the Keyboard and explain how to configure them using the
Keyboard.
Introduction
Congratulations on your purchase of the HP 2.4G Wireless Keyboard
Model: KBRF3871
Package Contents
•
Wireless Keyboard x 1
•
USB Adaptor ( to operate in coordination for Dongle model : MORFDIUOA-D )
•
AAA Battery x 2
•
User’s Guide x 1
PC Requirements
•
Pentium processor or equivalent
Operating System: Windows® XP with Service Pack 1 or higher, Windows® Vista.
Setup 2.4G Wireless Keyboard
• Please take off the battery cover and then put 2 AAA alkaline batteries in the battery compartment. Please
note batteries are fitting with correct electrode that shows on the inner side of battery cover.
•
Plug in adaptor to computer USB port.
•
Press “ Connect “ button to Setup the Keyboard and Adapter ( Dongle ) connection .
USB adaptor and Keyboard will automatically connection after Adaptor plug into PC after few seconds.
Page 1 of 4
Troubleshooting
Question: My Keyboard is not working. What should I do?
Answer: Check if the Adapter ( Dongle ) is plugged in correctly to your computer's USB port. A loose
connection may result in the computer not being able to detect the device.
If your Keyboard is connected to a hub or multi-port USB connector, unplug the device and plug it directly into
your computer's USB port, ensuring there is no interference caused by these devices.
Other system devices, such as PC cards, may cause conflicts that prevent your Keyboard from working
properly. Check the settings of these devices and make any changes as necessary. Reboot your computer
and re-attach the Keyboard.
Question: The Keyboard pointer is not moving. What should I do?
Answer: Ensure all setup procedures have been followed correctly. If software and drivers have already been
installed, remove these, reboot your computer and re-install.
Ensure that batteries are not out of power. Replace batteries if necessary.
Battery Notice:
•
Press any button to wake up the Keyboard while the Keyboard is in the standby mode.
•
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
Page 2 of 4
FCC Statement
Federal Communications Commission (FCC) requirements, Part 15. This equipment has been tested and
found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Any changes of modifications not expressly approved by the grantee of this device could void the user’s
authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE:
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE
USER'S AUTHORITY TO OPERATE THE EQUIPMENT.
Page 3 of 4
CE Statement
CE Declaration Of Conformity Hereby, the manufacturer, declares that this s Mouse Wireless Presenter in
compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Essential
requirements
-- Article 3 Protection requirements for health and safety - Article 3.1a
--Testing for electric safety according to EN 60950 has been conducted. These are considered relevant and
sufficient. Protection requirements for electromagnetic compatibility - Article 3.1b
--Testing for electromagnetic compatibility according to EN 301 489-1 and EN 301 489-3 has been conducted.
These are considered relevant and sufficient Effective use of the radio spectrum -Article 3.2
--Testing for radio test suites according to EN 300 440-2 has been conducted. These are considered relevant
and sufficient.
IC Statement
Operation is subject to the following two conditions: 1) this device may not cause interference and 2) this device
must accept any interference, including interference that may cause undesired operation of the device.
Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de
licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de
brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible
de provoquer un fonctionnement indésirable.
Page 4 of 4

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
XMP Toolkit                     : 3.1-701
About                           : 084c098b-1fb7-11e0-0000-ba9ff756ff46
Producer                        : AFPL Ghostscript 8.54
Modify Date                     : 2011:01:12 11:32:51+08:00
Create Date                     : 2011:01:11 16:19:28+08:00
Creator Tool                    : PDFCreator Version 0.9.2
Metadata Date                   : 2011:01:12 11:32:51+08:00
Document ID                     : 084c098b-1fb7-11e0-0000-ba9ff756ff46
Instance ID                     : uuid:3e9846fb-dfa1-41e5-bd14-d70628e13d50
Format                          : application/pdf
Title                           : KBRF3871 manual
Creator                         : EMILY
Page Count                      : 4
Author                          : EMILY
EXIF Metadata provided by EXIF.tools
FCC ID Filing: EMJKKBRF3871

Navigation menu