Primax Electronics MMOC-305B Pleomax 27MHz Optical Mouse User Manual 27Mhz Optical Mouse Manual

Primax Electronics Ltd Pleomax 27MHz Optical Mouse 27Mhz Optical Mouse Manual

Manual

MOC-305B User’s Manual Thank you for purchasing PLEOMAX mouse. Please carefully read the user’s manual to learn about key functions and driver installation. 1. Contents - 27Mhz Optical Mouse - Slim Dongle - Two AAA Batteries - Mouse Driver CD - User’s Manual 2. Hardware Installation - Open the battery door from the bottom case - Take off the Slim Dongle and insert the batteries into battery compartment - Close the battery door - Connect the Slim Dongle to the computer - Turn on the power switch 3. Driver Installation Notice: The driver supports Windows XP and Vista - Installation driver CD could be automatically Recognized once plugged in. In case it doesn’t work, please try below. - Insert the driver CD → Double click “Setup.exe” and follow set-up instructions. - A mouse setting icon will appear on the task bar. 4. Battery Notice - The LED indicator under the scroll roller shows green light when the battery status is OK. - The LED indicator will be blinking red with the frequency of 1 time at 1 second when the battery is low. Please change the battery immediately. - Press any button to wake up the mouse while it is in the standby mode. 5. Specifications 〔Mouse〕 - Dimensions : 115(L) x 63.4 (W) x 33.4(H)mm - Power : 3V DC 40mA - Weight : 70g 〔Receiver〕 - Dimensions : 51(L) x 18.1(W) x 3.5(H)mm - Weight : 3g 6. System Requirements - IBM or compatible PC - Compatibility Hardware: Windows 2000, XP SP2, Vista 32/64bit. Mac OS×(10.2.8)or higher. Software: Windows 2000, XP SP2, Vista 32/64bit. - USB Port
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This device complies with Part 15 of FCC RF Rules. Operation is subject to the following two conditions: 1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device.

Navigation menu