Primax Electronics MMORFGQO HP Wireless Mouse X3900 User Manual 6542162

Primax Electronics Ltd HP Wireless Mouse X3900 6542162

User Manual

HP Wireless Mouse X3900
User’s Guide
Model Rating
Mouse MORFGQO 1.5V 40mA
Dongle MORFGQO-D 5V
80mA
Made in China
1
Introduction
Package Contents
2.4G Wireless Receiver x 1
AA Battery x 1 pc
User’s Guide x 1
System Requirements
Pentium processor or equivalent
At least one USB port (USB 2.0 or 1.1)
Operating System: Windows® XP with Service Pack 1 or higher,
Windows® Vista, Windows® 7, Windows® 8
2
Feature
X3900 is a wireless size mouse with Pixart new
technology 2.4G wireless optical mouse. The RF
distance is more than 10 meter.
X3900 button uses magnetic face plate design for
battery change and dongle storage for an easier
operation.
It provides user to more choice to have different color
or pattern key as per personal preference as an add-on
value to users.
It uses the nano dongle can storage in mouse with
good portable for users.
It uses only one AA battery as less weight for more
portable and the battery life is more than 4 months.
It also provides a low battery indicator on top of the
mouse to warning user for battery change.
3
Function introduction
4
Regulatory Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. End users must follow the specific operating
instructions for satisfying RF exposure compliance. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
5
IC Statement
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio
exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes:
1) le dispositif ne doit pas produire de brouillage préjudiciable, et
2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un
fonctionnement indésirable
發射功率
使用頻道數
低功率電波輻射性電機管理辦法
第十二條
經型式認証合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻率、加大
功率或變更原設計之特性及功能。
第十四條
低功率射頻電機之使用不得影響飛航安全及干擾合法通信﹔經發現有干擾現象時,應立即停用,
並改善至無干擾時方得繼續使用。前項合法通信,指依電信法規定作業之無線電通信。
低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾

Navigation menu