Primax Electronics P82801 EC54 BT MULTIMEDIA Controller and Presenter User Manual EC54 UM
Primax Electronics Ltd EC54 BT MULTIMEDIA Controller and Presenter EC54 UM
Manual
EC54 Multimedia Controller and Presenter
User’s Guide
Brand : Primax
Model No : 26-82801(Primax)
Rating: input: 3.3V DC 150mA, output: 3.7V DC 75mA
Made in China
1
Introduction
Package Contents
• EC54 Presenter x 1
• User’s Guide x 1
PC Requirements
• Pentium processor or equivalent
• At least one Express Card 54 slot
• Operating System: Windows
®
2000, Windows
®
XP with Service Pack 1
or higher, Windows
®
Vista.
Application support :
• Microsoft Office 2003 and Window Media Player
2
Charging
Slide EC54 into Express Card 54 slot of your PC or Notebook. The charging light
will be ON and when charge completion, the light become off.
Charge indication: Continue RED is charging, Off is Charging completion.
Note : Please do charge over 3 hours before 1st time use.
Connection to PC or Notebook
1. Switch the switch at bottom of EC54 to presenter mode or media.
2. Press ID button over 3 second until Light is flashing in blue.
3. Connection with PC or Notebook Bluetooth with itself instruction.
3
Presenter
1. Switch the bottom switch to mark and blue light will flash until it link to PC or
Notebook and then off.
2. Open a Microsoft Powerpoint file and start to use the presenter.
3. Key Function introduction:
Laser Pointer
Volume Up
Volume Down
Mute
Shit F5/ESC, Compatible for Microsoft PowerPoint 2003
Black Screen
Previous Page
Next Page
Mouse Left button/Air Mouse Cursor
4
Media
1. Switch the bottom switch to mark and blue light will flash until it link to PC or
Notebook and then off.
2. Open a Music file in Window MediaPlayer and start to use the media controller.
3. Key Function introduction:
No Function
Volume Up
Volume Down
Mute
Play/Pause
Stop
Previous Track
Next Track
Mouse Left button/Air Mouse Cursor
5
Power off
Switch the bottom switch to mark to off power and storage to your PC or Notebook 54
slot.
6
Regulatory Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. End users must follow the specific
operating instructions for satisfying RF exposure compliance. This transmitter must not be
co-located or operating in conjunction with any other antenna or transmitter.
7
The Following Information is Only for EU-member States:
The use of the symbol indicates that this product may not be treated as household
waste. By ensuring this product is disposed of correctly, you will help prevent
potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product. For
more detailed information about recycling of this product, please contact your local city
office, your household waste disposal service or the shop where you purchased the product.
About your Wireless Presenter with Laser Pointer
• The maximum range is 60 ft (18m) between the receiver and the remote.
• The receiver has a single light indicator with 2 colors, green and red. For every button press of
the presenter, the receiver LED quickly flashes green to indicate that the battery level is good.
The LED will flash red on every button press if the battery level is low.
• The Wireless Presenter with Laser Pointer should work up to one year with the batteries that
come with it. This is based on average usage. To extend battery life when not in use, be sure
to turn off the remote by inserting the receiver into the remote.
• Always replace the batteries in sets, using the same age and brand of batteries.
• Always dispose of batteries properly.