Primax Electronics PWP300 WP300 WIRELESS TOUCHPAD User Manual
Primax Electronics Ltd WP300 WIRELESS TOUCHPAD
User Manual
ENGLISH
WP300 Touchpad Q8103 / First Edition / February 2013
Package Contents
WP300 Touchpad
USB receiver x1
AA battery x2
Quick Start Guide
a
b
c
d
a
c
Quick Start
Guide
d
b
1.Remove the USB dongle
from underneath the WP300
Touchpad.
Setting up your Touchpad with your Desktop or Notebook PC
NOTE: Touchpad gestures
are limited when used with
Windows® Vista / XP / 7™
operating systems.
Status LED Behavior
ON Green Powered on.
OFF Off Powered off.
Power
Saving Mode Off To wake up WP300 from Sleep Mode,
click/tap on the touchpad.
Pairing in
progress
Flashing
green
The touchpad is connecting to the USB
receiver.
Low power Flashing
red Replace the AA batteries.
Battery
empty Off No touchpad activity. Replace the AA
batteries.
LED Indicator
Touchpad Gestures
1. Finger Slide.
Slide your nger across
the touchpad to move the
pointer.
2. Tap/Double Tap
• In the Start screen, tap once to
launch an app.
•In Desktop mode, double-tap an
item to launch an application.
3. Right edge swipe
Swipe from the right edge to
launch the Charms bar.
4. Top edge swipe
•In the Start screen, swipe
from the top edge to launch
the All apps bar.
•In a running app, swipe
from the top edge to view
its menu.
5. Left edge swipe
Swipe from the left edge to
shufe your running apps.
6. Zoom in / Zoom out
Spread apart your two
ngers on the touchpad to
zoom out.
Bring together your ngers
on the touchpad to zoom in.
1. Remove the battery cover.
2. Insert the AA batteries into the slot,
taking note of the correct polarity.
Installing the batteries
NOTE: The included batteries
are not chargeable.
2. Insert the USB receiver into
an available USB port on your
notebook or desktop PC.
3.Press the power button
underneath the touchpad to
power on the touchpad.
Right click AreaLeft click Area
Touchpad Area
Primary Button and Context Menu
• Primary Button
Touchpad and click area: 1-tap with 1 nger
Left click area: 1-click
• Context Menu
Touchpad and click area: 1-tap with 2 ngers
Right click area: 1-click
Additional Touchpad Gestures
NOTE: The USB receiver can
be stored underneath the
touchpad.
Multi-touch Gestures
2-ngers Vertical scroll
Horizontal scroll
3-ngers Brush left / right to go to previous / next page
Brush up / down for Windows® 8™ Start Screen
4-ngers Brush left / right to go to previous / next track
Brush up / down to increase / decrease volume
5-ngers Brush up / down to hide / resume desktop
4. The system will begin pairing
the USB receiver with the
touchpad.
S-CHINESE
Package Contents
1. WP300 Touchpad.
2. USB receiver x1.
3. AA battery x2
4. Quick Start Guide .
NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™ operating systems.
Installing the batteries
1. Remove the battery cover.
2. Insert the AA batteries into the slot, taking note of the correct polarity.
NOTE: The included batteries are not chargeable.
Setting up your Touchpad with your Desktop or Notebook PC
1. Remove the USB dongle from underneath the WP300 Touchpad.
NOTE: The USB receiver can be stored underneath the touchpad.
2. Insert the USB receiver into an available USB port on your notebook or desktop PC.
3. Press the power button underneath the touchpad to power on the touchpad.
4. The system will begin pairing the USB receiver with the touchpad.
Primary Button and Context Menu
• Primary Button
Touchpad and click area: 1-tap with 1 nger
Left click area: 1-click
• Context Menu Button
Touchpad and click area: 1-tap with 2 ngers
Right click area: 1-click
Additional Touchpad Gestures
Fingers Gestures
2-ngers Vertical scroll
Horizontal scroll
3-ngers Brush left / right to go to
previous / next page
Brush up/down for Windows®
8™ Start Screen
4-ngers Brush left / right to go to
previous / next track
Brush up / down to increase /
decrease volume
5-ngers Brush up / down to hide /
resume desktop
LED Indicator
1. On - Green - Touchpad powered on.
2. O - O - Touchpad powered o.
3. Power saving mode - O - To wake up WP300 from Sleep
Mode, click/tap on the touchpad.
4. Pairing in progress - Flashing green - The touchpad is
connecting to the USB receiver.
5. Low power - Flashing red - Replace the AA batteries.
6. Battery empty - O - No touchpad activity. Replace the AA
batteries.
Touchpad Gestures
1. Finger slide: Slide your nger across the touchpad to move the pointer.
2. Right edge swipe: Swipe from the right edge to launch the Charms bar.
3. Tap/Double tap: In the Start screen, tap an app to launch it. In Desktop mode, double-tap an item to launch it.
4. Top edge swipe: In the Start screen, swipe from the top edge to launch the All apps bar. In a running app, swipe
from the top edge to view its menu.
5. Left edge swipe: Swipe from the left edge to shue your running apps.
6. Zoom in: Spread apart your two ngers on the touchpad.
S-CHINESE
Package Contents
1. WP300 Touchpad.
2. USB receiver x1.
3. AA battery x2
4. Quick Start Guide .
NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™ operating systems.
Installing the batteries
1. Remove the battery cover.
2. Insert the AA batteries into the slot, taking note of the correct polarity.
NOTE: The included batteries are not chargeable.
Setting up your Touchpad with your Desktop or Notebook PC
1. Remove the USB dongle from underneath the WP300 Touchpad.
NOTE: The USB receiver can be stored underneath the touchpad.
2. Insert the USB receiver into an available USB port on your notebook or desktop PC.
3. Press the power button underneath the touchpad to power on the touchpad.
4. The system will begin pairing the USB receiver with the touchpad.
Primary Button and Context Menu
• Primary Button
Touchpad and click area: 1-tap with 1 nger
Left click area: 1-click
• Context Menu Button
Touchpad and click area: 1-tap with 2 ngers
Right click area: 1-click
Additional Touchpad Gestures
Fingers Gestures
2-ngers Vertical scroll
Horizontal scroll
3-ngers Brush left / right to go to
previous / next page
Brush up/down for Windows®
8™ Start Screen
4-ngers Brush left / right to go to
previous / next track
Brush up / down to increase /
decrease volume
5-ngers Brush up / down to hide /
resume desktop
LED Indicator
1. On - Green - Touchpad powered on.
2. O - O - Touchpad powered o.
3. Power saving mode - O - To wake up WP300 from Sleep
Mode, click/tap on the touchpad.
4. Pairing in progress - Flashing green - The touchpad is
connecting to the USB receiver.
5. Low power - Flashing red - Replace the AA batteries.
6. Battery empty - O - No touchpad activity. Replace the AA
batteries.
Touchpad Gestures
1. Finger slide: Slide your nger across the touchpad to move the pointer.
2. Right edge swipe: Swipe from the right edge to launch the Charms bar.
3. Tap/Double tap: In the Start screen, tap an app to launch it. In Desktop mode, double-tap an item to launch it.
4. Top edge swipe: In the Start screen, swipe from the top edge to launch the All apps bar. In a running app, swipe
from the top edge to view its menu.
5. Left edge swipe: Swipe from the left edge to shue your running apps.
6. Zoom in: Spread apart your two ngers on the touchpad.
S-CHINESE
Package Contents
1. WP300 Touchpad.
2. USB receiver x1.
3. AA battery x2
4. Quick Start Guide .
NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™ operating systems.
Installing the batteries
1. Remove the battery cover.
2. Insert the AA batteries into the slot, taking note of the correct polarity.
NOTE: The included batteries are not chargeable.
Setting up your Touchpad with your Desktop or Notebook PC
1. Remove the USB dongle from underneath the WP300 Touchpad.
NOTE: The USB receiver can be stored underneath the touchpad.
2. Insert the USB receiver into an available USB port on your notebook or desktop PC.
3. Press the power button underneath the touchpad to power on the touchpad.
4. The system will begin pairing the USB receiver with the touchpad.
Primary Button and Context Menu
• Primary Button
Touchpad and click area: 1-tap with 1 nger
Left click area: 1-click
• Context Menu Button
Touchpad and click area: 1-tap with 2 ngers
Right click area: 1-click
Additional Touchpad Gestures
Fingers Gestures
2-ngers Vertical scroll
Horizontal scroll
3-ngers Brush left / right to go to
previous / next page
Brush up/down for Windows®
8™ Start Screen
4-ngers Brush left / right to go to
previous / next track
Brush up / down to increase /
decrease volume
5-ngers Brush up / down to hide /
resume desktop
LED Indicator
1. On - Green - Touchpad powered on.
2. O - O - Touchpad powered o.
3. Power saving mode - O - To wake up WP300 from Sleep
Mode, click/tap on the touchpad.
4. Pairing in progress - Flashing green - The touchpad is
connecting to the USB receiver.
5. Low power - Flashing red - Replace the AA batteries.
6. Battery empty - O - No touchpad activity. Replace the AA
batteries.
Touchpad Gestures
1. Finger slide: Slide your nger across the touchpad to move the pointer.
2. Right edge swipe: Swipe from the right edge to launch the Charms bar.
3. Tap/Double tap: In the Start screen, tap an app to launch it. In Desktop mode, double-tap an item to launch it.
4. Top edge swipe: In the Start screen, swipe from the top edge to launch the All apps bar. In a running app, swipe
from the top edge to view its menu.
5. Left edge swipe: Swipe from the left edge to shue your running apps.
6. Zoom in: Spread apart your two ngers on the touchpad.
S-CHINESE
Package Contents
1. WP300 Touchpad.
2. USB receiver x1.
3. AA battery x2
4. Quick Start Guide .
NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™ operating systems.
Installing the batteries
1. Remove the battery cover.
2. Insert the AA batteries into the slot, taking note of the correct polarity.
NOTE: The included batteries are not chargeable.
Setting up your Touchpad with your Desktop or Notebook PC
1. Remove the USB dongle from underneath the WP300 Touchpad.
NOTE: The USB receiver can be stored underneath the touchpad.
2. Insert the USB receiver into an available USB port on your notebook or desktop PC.
3. Press the power button underneath the touchpad to power on the touchpad.
4. The system will begin pairing the USB receiver with the touchpad.
Primary Button and Context Menu
• Primary Button
Touchpad and click area: 1-tap with 1 nger
Left click area: 1-click
• Context Menu Button
Touchpad and click area: 1-tap with 2 ngers
Right click area: 1-click
Additional Touchpad Gestures
Fingers Gestures
2-ngers Vertical scroll
Horizontal scroll
3-ngers Brush left / right to go to
previous / next page
Brush up/down for Windows®
8™ Start Screen
4-ngers Brush left / right to go to
previous / next track
Brush up / down to increase /
decrease volume
5-ngers Brush up / down to hide /
resume desktop
LED Indicator
1. On - Green - Touchpad powered on.
2. O - O - Touchpad powered o.
3. Power saving mode - O - To wake up WP300 from Sleep
Mode, click/tap on the touchpad.
4. Pairing in progress - Flashing green - The touchpad is
connecting to the USB receiver.
5. Low power - Flashing red - Replace the AA batteries.
6. Battery empty - O - No touchpad activity. Replace the AA
batteries.
Touchpad Gestures
1. Finger slide: Slide your nger across the touchpad to move the pointer.
2. Right edge swipe: Swipe from the right edge to launch the Charms bar.
3. Tap/Double tap: In the Start screen, tap an app to launch it. In Desktop mode, double-tap an item to launch it.
4. Top edge swipe: In the Start screen, swipe from the top edge to launch the All apps bar. In a running app, swipe
from the top edge to view its menu.
5. Left edge swipe: Swipe from the left edge to shue your running apps.
6. Zoom in: Spread apart your two ngers on the touchpad.
WP300 Touchpad Q8103 / First Edition / February 2013
ITALIAN
ITALIAN
ITALIAN
ITALIAN
ITALIAN
ITALIAN
Package Contents
1. WP300 Touchpad.
2. USB receiver x1.
3. AA battery x2
4. Quick Start Guide .
NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™
operating systems.
Installing the batteries
1. Remove the battery cover.
2. Insert the AA batteries into the slot, taking note of the correct polarity.
NOTE: The included batteries are not chargeable.
Setting up your Touchpad with your Desktop or Notebook PC
1. Remove the USB dongle from underneath the WP300 Touchpad.
NOTE: The USB receiver can be stored underneath the touchpad.
2. Insert the USB receiver into an available USB port on your notebook or desktop
PC.
3. Press the power button underneath the touchpad to power on the touchpad.
4. The system will begin pairing the USB receiver with the touchpad.
Primary Button and Context Menu
• Primary Button
Touchpad and click area: 1-tap with 1 nger
Left click area: 1-click
• Context Menu Button
Touchpad and click area: 1-tap with 2 ngers
Right click area: 1-click
LED Indicator
1. On - Green - Touchpad powered on.
2. O - O - Touchpad powered o.
3. Power saving mode - O - To wake up WP300 from Sleep Mode, click/tap on the
touchpad.
4. Pairing in progress - Flashing green - The touchpad is connecting to the USB
receiver.
5. Low power - Flashing red - Replace the AA batteries.
6. Battery empty - O - No touchpad activity. Replace the AA batteries.
Additional Touchpad Gestures
Fingers Gestures
2-ngers Vertical scroll
Horizontal scroll
3-ngers Brush left / right to go to
previous / next page
Brush up/down for Windows®
8™ Start Screen
4-ngers Brush left / right to go to
previous / next track
Brush up / down to increase /
decrease volume
5-ngers Brush up / down to hide /
resume desktop
Touchpad Gestures
1. Finger slide: Slide your nger across the
touchpad to move the pointer.
2. Right edge swipe: Swipe from the right
edge to launch the Charms bar.
3. Tap/Double tap: In the Start screen, tap
an app to launch it. In Desktop mode,
double-tap an item to launch it.
4. Top edge swipe: In the Start screen, swipe
from the top edge to launch the All apps
bar. In a running app, swipe from the top
edge to view its menu.
5. Left edge swipe: Swipe from the left edge
to shue your running apps.
6. Zoom in: Spread apart your two ngers on
the touchpad.
Package Contents
1. WP300 Touchpad.
2. USB receiver x1.
3. AA battery x2
4. Quick Start Guide .
NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™
operating systems.
Installing the batteries
1. Remove the battery cover.
2. Insert the AA batteries into the slot, taking note of the correct polarity.
NOTE: The included batteries are not chargeable.
Setting up your Touchpad with your Desktop or Notebook PC
1. Remove the USB dongle from underneath the WP300 Touchpad.
NOTE: The USB receiver can be stored underneath the touchpad.
2. Insert the USB receiver into an available USB port on your notebook or desktop
PC.
3. Press the power button underneath the touchpad to power on the touchpad.
4. The system will begin pairing the USB receiver with the touchpad.
Primary Button and Context Menu
• Primary Button
Touchpad and click area: 1-tap with 1 nger
Left click area: 1-click
• Context Menu Button
Touchpad and click area: 1-tap with 2 ngers
Right click area: 1-click
LED Indicator
1. On - Green - Touchpad powered on.
2. O - O - Touchpad powered o.
3. Power saving mode - O - To wake up WP300 from Sleep Mode, click/tap on the
touchpad.
4. Pairing in progress - Flashing green - The touchpad is connecting to the USB
receiver.
5. Low power - Flashing red - Replace the AA batteries.
6. Battery empty - O - No touchpad activity. Replace the AA batteries.
Additional Touchpad Gestures
Fingers Gestures
2-ngers Vertical scroll
Horizontal scroll
3-ngers Brush left / right to go to
previous / next page
Brush up/down for Windows®
8™ Start Screen
4-ngers Brush left / right to go to
previous / next track
Brush up / down to increase /
decrease volume
5-ngers Brush up / down to hide /
resume desktop
Touchpad Gestures
1. Finger slide: Slide your nger across the
touchpad to move the pointer.
2. Right edge swipe: Swipe from the right
edge to launch the Charms bar.
3. Tap/Double tap: In the Start screen, tap
an app to launch it. In Desktop mode,
double-tap an item to launch it.
4. Top edge swipe: In the Start screen, swipe
from the top edge to launch the All apps
bar. In a running app, swipe from the top
edge to view its menu.
5. Left edge swipe: Swipe from the left edge
to shue your running apps.
6. Zoom in: Spread apart your two ngers on
the touchpad.
Package Contents
1. WP300 Touchpad.
2. USB receiver x1.
3. AA battery x2
4. Quick Start Guide .
NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™
operating systems.
Installing the batteries
1. Remove the battery cover.
2. Insert the AA batteries into the slot, taking note of the correct polarity.
NOTE: The included batteries are not chargeable.
Setting up your Touchpad with your Desktop or Notebook PC
1. Remove the USB dongle from underneath the WP300 Touchpad.
NOTE: The USB receiver can be stored underneath the touchpad.
2. Insert the USB receiver into an available USB port on your notebook or desktop
PC.
3. Press the power button underneath the touchpad to power on the touchpad.
4. The system will begin pairing the USB receiver with the touchpad.
Primary Button and Context Menu
• Primary Button
Touchpad and click area: 1-tap with 1 nger
Left click area: 1-click
• Context Menu Button
Touchpad and click area: 1-tap with 2 ngers
Right click area: 1-click
LED Indicator
1. On - Green - Touchpad powered on.
2. O - O - Touchpad powered o.
3. Power saving mode - O - To wake up WP300 from Sleep Mode, click/tap on the
touchpad.
4. Pairing in progress - Flashing green - The touchpad is connecting to the USB
receiver.
5. Low power - Flashing red - Replace the AA batteries.
6. Battery empty - O - No touchpad activity. Replace the AA batteries.
Additional Touchpad Gestures
Fingers Gestures
2-ngers Vertical scroll
Horizontal scroll
3-ngers Brush left / right to go to
previous / next page
Brush up/down for Windows®
8™ Start Screen
4-ngers Brush left / right to go to
previous / next track
Brush up / down to increase /
decrease volume
5-ngers Brush up / down to hide /
resume desktop
Touchpad Gestures
1. Finger slide: Slide your nger across the
touchpad to move the pointer.
2. Right edge swipe: Swipe from the right
edge to launch the Charms bar.
3. Tap/Double tap: In the Start screen, tap
an app to launch it. In Desktop mode,
double-tap an item to launch it.
4. Top edge swipe: In the Start screen, swipe
from the top edge to launch the All apps
bar. In a running app, swipe from the top
edge to view its menu.
5. Left edge swipe: Swipe from the left edge
to shue your running apps.
6. Zoom in: Spread apart your two ngers on
the touchpad.
Package Contents
1. WP300 Touchpad.
2. USB receiver x1.
3. AA battery x2
4. Quick Start Guide .
NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™
operating systems.
Installing the batteries
1. Remove the battery cover.
2. Insert the AA batteries into the slot, taking note of the correct polarity.
NOTE: The included batteries are not chargeable.
Setting up your Touchpad with your Desktop or Notebook PC
1. Remove the USB dongle from underneath the WP300 Touchpad.
NOTE: The USB receiver can be stored underneath the touchpad.
2. Insert the USB receiver into an available USB port on your notebook or desktop
PC.
3. Press the power button underneath the touchpad to power on the touchpad.
4. The system will begin pairing the USB receiver with the touchpad.
Primary Button and Context Menu
• Primary Button
Touchpad and click area: 1-tap with 1 nger
Left click area: 1-click
• Context Menu Button
Touchpad and click area: 1-tap with 2 ngers
Right click area: 1-click
LED Indicator
1. On - Green - Touchpad powered on.
2. O - O - Touchpad powered o.
3. Power saving mode - O - To wake up WP300 from Sleep Mode, click/tap on the
touchpad.
4. Pairing in progress - Flashing green - The touchpad is connecting to the USB
receiver.
5. Low power - Flashing red - Replace the AA batteries.
6. Battery empty - O - No touchpad activity. Replace the AA batteries.
Additional Touchpad Gestures
Fingers Gestures
2-ngers Vertical scroll
Horizontal scroll
3-ngers Brush left / right to go to
previous / next page
Brush up/down for Windows®
8™ Start Screen
4-ngers Brush left / right to go to
previous / next track
Brush up / down to increase /
decrease volume
5-ngers Brush up / down to hide /
resume desktop
Touchpad Gestures
1. Finger slide: Slide your nger across the
touchpad to move the pointer.
2. Right edge swipe: Swipe from the right
edge to launch the Charms bar.
3. Tap/Double tap: In the Start screen, tap
an app to launch it. In Desktop mode,
double-tap an item to launch it.
4. Top edge swipe: In the Start screen, swipe
from the top edge to launch the All apps
bar. In a running app, swipe from the top
edge to view its menu.
5. Left edge swipe: Swipe from the left edge
to shue your running apps.
6. Zoom in: Spread apart your two ngers on
the touchpad.
Package Contents
1. WP300 Touchpad.
2. USB receiver x1.
3. AA battery x2
4. Quick Start Guide .
NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™
operating systems.
Installing the batteries
1. Remove the battery cover.
2. Insert the AA batteries into the slot, taking note of the correct polarity.
NOTE: The included batteries are not chargeable.
Setting up your Touchpad with your Desktop or Notebook PC
1. Remove the USB dongle from underneath the WP300 Touchpad.
NOTE: The USB receiver can be stored underneath the touchpad.
2. Insert the USB receiver into an available USB port on your notebook or desktop
PC.
3. Press the power button underneath the touchpad to power on the touchpad.
4. The system will begin pairing the USB receiver with the touchpad.
Primary Button and Context Menu
• Primary Button
Touchpad and click area: 1-tap with 1 nger
Left click area: 1-click
• Context Menu Button
Touchpad and click area: 1-tap with 2 ngers
Right click area: 1-click
LED Indicator
1. On - Green - Touchpad powered on.
2. O - O - Touchpad powered o.
3. Power saving mode - O - To wake up WP300 from Sleep Mode, click/tap on the
touchpad.
4. Pairing in progress - Flashing green - The touchpad is connecting to the USB
receiver.
5. Low power - Flashing red - Replace the AA batteries.
6. Battery empty - O - No touchpad activity. Replace the AA batteries.
Additional Touchpad Gestures
Fingers Gestures
2-ngers Vertical scroll
Horizontal scroll
3-ngers Brush left / right to go to
previous / next page
Brush up/down for Windows®
8™ Start Screen
4-ngers Brush left / right to go to
previous / next track
Brush up / down to increase /
decrease volume
5-ngers Brush up / down to hide /
resume desktop
Touchpad Gestures
1. Finger slide: Slide your nger across the
touchpad to move the pointer.
2. Right edge swipe: Swipe from the right
edge to launch the Charms bar.
3. Tap/Double tap: In the Start screen, tap
an app to launch it. In Desktop mode,
double-tap an item to launch it.
4. Top edge swipe: In the Start screen, swipe
from the top edge to launch the All apps
bar. In a running app, swipe from the top
edge to view its menu.
5. Left edge swipe: Swipe from the left edge
to shue your running apps.
6. Zoom in: Spread apart your two ngers on
the touchpad.
Package Contents
1. WP300 Touchpad.
2. USB receiver x1.
3. AA battery x2
4. Quick Start Guide .
NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™
operating systems.
Installing the batteries
1. Remove the battery cover.
2. Insert the AA batteries into the slot, taking note of the correct polarity.
NOTE: The included batteries are not chargeable.
Setting up your Touchpad with your Desktop or Notebook PC
1. Remove the USB dongle from underneath the WP300 Touchpad.
NOTE: The USB receiver can be stored underneath the touchpad.
2. Insert the USB receiver into an available USB port on your notebook or desktop
PC.
3. Press the power button underneath the touchpad to power on the touchpad.
4. The system will begin pairing the USB receiver with the touchpad.
Primary Button and Context Menu
• Primary Button
Touchpad and click area: 1-tap with 1 nger
Left click area: 1-click
• Context Menu Button
Touchpad and click area: 1-tap with 2 ngers
Right click area: 1-click
LED Indicator
1. On - Green - Touchpad powered on.
2. O - O - Touchpad powered o.
3. Power saving mode - O - To wake up WP300 from Sleep Mode, click/tap on the
touchpad.
4. Pairing in progress - Flashing green - The touchpad is connecting to the USB
receiver.
5. Low power - Flashing red - Replace the AA batteries.
6. Battery empty - O - No touchpad activity. Replace the AA batteries.
Additional Touchpad Gestures
Fingers Gestures
2-ngers Vertical scroll
Horizontal scroll
3-ngers Brush left / right to go to
previous / next page
Brush up/down for Windows®
8™ Start Screen
4-ngers Brush left / right to go to
previous / next track
Brush up / down to increase /
decrease volume
5-ngers Brush up / down to hide /
resume desktop
Touchpad Gestures
1. Finger slide: Slide your nger across the
touchpad to move the pointer.
2. Right edge swipe: Swipe from the right
edge to launch the Charms bar.
3. Tap/Double tap: In the Start screen, tap
an app to launch it. In Desktop mode,
double-tap an item to launch it.
4. Top edge swipe: In the Start screen, swipe
from the top edge to launch the All apps
bar. In a running app, swipe from the top
edge to view its menu.
5. Left edge swipe: Swipe from the left edge
to shue your running apps.
6. Zoom in: Spread apart your two ngers on
the touchpad.
WP300 Touchpad Q8103 / First Edition / February 2013
ITALIAN
ITALIAN
ITALIAN
ITALIAN
ITALIAN
ITALIAN
Package Contents
1. WP300 Touchpad.
2. USB receiver x1.
3. AA battery x2
4. Quick Start Guide .
NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™
operating systems.
Installing the batteries
1. Remove the battery cover.
2. Insert the AA batteries into the slot, taking note of the correct polarity.
NOTE: The included batteries are not chargeable.
Setting up your Touchpad with your Desktop or Notebook PC
1. Remove the USB dongle from underneath the WP300 Touchpad.
NOTE: The USB receiver can be stored underneath the touchpad.
2. Insert the USB receiver into an available USB port on your notebook or desktop
PC.
3. Press the power button underneath the touchpad to power on the touchpad.
4. The system will begin pairing the USB receiver with the touchpad.
Primary Button and Context Menu
• Primary Button
Touchpad and click area: 1-tap with 1 nger
Left click area: 1-click
• Context Menu Button
Touchpad and click area: 1-tap with 2 ngers
Right click area: 1-click
LED Indicator
1. On - Green - Touchpad powered on.
2. O - O - Touchpad powered o.
3. Power saving mode - O - To wake up WP300 from Sleep Mode, click/tap on the
touchpad.
4. Pairing in progress - Flashing green - The touchpad is connecting to the USB
receiver.
5. Low power - Flashing red - Replace the AA batteries.
6. Battery empty - O - No touchpad activity. Replace the AA batteries.
Additional Touchpad Gestures
Fingers Gestures
2-ngers Vertical scroll
Horizontal scroll
3-ngers Brush left / right to go to
previous / next page
Brush up/down for Windows®
8™ Start Screen
4-ngers Brush left / right to go to
previous / next track
Brush up / down to increase /
decrease volume
5-ngers Brush up / down to hide /
resume desktop
Touchpad Gestures
1. Finger slide: Slide your nger across the
touchpad to move the pointer.
2. Right edge swipe: Swipe from the right
edge to launch the Charms bar.
3. Tap/Double tap: In the Start screen, tap
an app to launch it. In Desktop mode,
double-tap an item to launch it.
4. Top edge swipe: In the Start screen, swipe
from the top edge to launch the All apps
bar. In a running app, swipe from the top
edge to view its menu.
5. Left edge swipe: Swipe from the left edge
to shue your running apps.
6. Zoom in: Spread apart your two ngers on
the touchpad.
Package Contents
1. WP300 Touchpad.
2. USB receiver x1.
3. AA battery x2
4. Quick Start Guide .
NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™
operating systems.
Installing the batteries
1. Remove the battery cover.
2. Insert the AA batteries into the slot, taking note of the correct polarity.
NOTE: The included batteries are not chargeable.
Setting up your Touchpad with your Desktop or Notebook PC
1. Remove the USB dongle from underneath the WP300 Touchpad.
NOTE: The USB receiver can be stored underneath the touchpad.
2. Insert the USB receiver into an available USB port on your notebook or desktop
PC.
3. Press the power button underneath the touchpad to power on the touchpad.
4. The system will begin pairing the USB receiver with the touchpad.
Primary Button and Context Menu
• Primary Button
Touchpad and click area: 1-tap with 1 nger
Left click area: 1-click
• Context Menu Button
Touchpad and click area: 1-tap with 2 ngers
Right click area: 1-click
LED Indicator
1. On - Green - Touchpad powered on.
2. O - O - Touchpad powered o.
3. Power saving mode - O - To wake up WP300 from Sleep Mode, click/tap on the
touchpad.
4. Pairing in progress - Flashing green - The touchpad is connecting to the USB
receiver.
5. Low power - Flashing red - Replace the AA batteries.
6. Battery empty - O - No touchpad activity. Replace the AA batteries.
Additional Touchpad Gestures
Fingers Gestures
2-ngers Vertical scroll
Horizontal scroll
3-ngers Brush left / right to go to
previous / next page
Brush up/down for Windows®
8™ Start Screen
4-ngers Brush left / right to go to
previous / next track
Brush up / down to increase /
decrease volume
5-ngers Brush up / down to hide /
resume desktop
Touchpad Gestures
1. Finger slide: Slide your nger across the
touchpad to move the pointer.
2. Right edge swipe: Swipe from the right
edge to launch the Charms bar.
3. Tap/Double tap: In the Start screen, tap
an app to launch it. In Desktop mode,
double-tap an item to launch it.
4. Top edge swipe: In the Start screen, swipe
from the top edge to launch the All apps
bar. In a running app, swipe from the top
edge to view its menu.
5. Left edge swipe: Swipe from the left edge
to shue your running apps.
6. Zoom in: Spread apart your two ngers on
the touchpad.
Package Contents
1. WP300 Touchpad.
2. USB receiver x1.
3. AA battery x2
4. Quick Start Guide .
NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™
operating systems.
Installing the batteries
1. Remove the battery cover.
2. Insert the AA batteries into the slot, taking note of the correct polarity.
NOTE: The included batteries are not chargeable.
Setting up your Touchpad with your Desktop or Notebook PC
1. Remove the USB dongle from underneath the WP300 Touchpad.
NOTE: The USB receiver can be stored underneath the touchpad.
2. Insert the USB receiver into an available USB port on your notebook or desktop
PC.
3. Press the power button underneath the touchpad to power on the touchpad.
4. The system will begin pairing the USB receiver with the touchpad.
Primary Button and Context Menu
• Primary Button
Touchpad and click area: 1-tap with 1 nger
Left click area: 1-click
• Context Menu Button
Touchpad and click area: 1-tap with 2 ngers
Right click area: 1-click
LED Indicator
1. On - Green - Touchpad powered on.
2. O - O - Touchpad powered o.
3. Power saving mode - O - To wake up WP300 from Sleep Mode, click/tap on the
touchpad.
4. Pairing in progress - Flashing green - The touchpad is connecting to the USB
receiver.
5. Low power - Flashing red - Replace the AA batteries.
6. Battery empty - O - No touchpad activity. Replace the AA batteries.
Additional Touchpad Gestures
Fingers Gestures
2-ngers Vertical scroll
Horizontal scroll
3-ngers Brush left / right to go to
previous / next page
Brush up/down for Windows®
8™ Start Screen
4-ngers Brush left / right to go to
previous / next track
Brush up / down to increase /
decrease volume
5-ngers Brush up / down to hide /
resume desktop
Touchpad Gestures
1. Finger slide: Slide your nger across the
touchpad to move the pointer.
2. Right edge swipe: Swipe from the right
edge to launch the Charms bar.
3. Tap/Double tap: In the Start screen, tap
an app to launch it. In Desktop mode,
double-tap an item to launch it.
4. Top edge swipe: In the Start screen, swipe
from the top edge to launch the All apps
bar. In a running app, swipe from the top
edge to view its menu.
5. Left edge swipe: Swipe from the left edge
to shue your running apps.
6. Zoom in: Spread apart your two ngers on
the touchpad.
Package Contents
1. WP300 Touchpad.
2. USB receiver x1.
3. AA battery x2
4. Quick Start Guide .
NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™
operating systems.
Installing the batteries
1. Remove the battery cover.
2. Insert the AA batteries into the slot, taking note of the correct polarity.
NOTE: The included batteries are not chargeable.
Setting up your Touchpad with your Desktop or Notebook PC
1. Remove the USB dongle from underneath the WP300 Touchpad.
NOTE: The USB receiver can be stored underneath the touchpad.
2. Insert the USB receiver into an available USB port on your notebook or desktop
PC.
3. Press the power button underneath the touchpad to power on the touchpad.
4. The system will begin pairing the USB receiver with the touchpad.
Primary Button and Context Menu
• Primary Button
Touchpad and click area: 1-tap with 1 nger
Left click area: 1-click
• Context Menu Button
Touchpad and click area: 1-tap with 2 ngers
Right click area: 1-click
LED Indicator
1. On - Green - Touchpad powered on.
2. O - O - Touchpad powered o.
3. Power saving mode - O - To wake up WP300 from Sleep Mode, click/tap on the
touchpad.
4. Pairing in progress - Flashing green - The touchpad is connecting to the USB
receiver.
5. Low power - Flashing red - Replace the AA batteries.
6. Battery empty - O - No touchpad activity. Replace the AA batteries.
Additional Touchpad Gestures
Fingers Gestures
2-ngers Vertical scroll
Horizontal scroll
3-ngers Brush left / right to go to
previous / next page
Brush up/down for Windows®
8™ Start Screen
4-ngers Brush left / right to go to
previous / next track
Brush up / down to increase /
decrease volume
5-ngers Brush up / down to hide /
resume desktop
Touchpad Gestures
1. Finger slide: Slide your nger across the
touchpad to move the pointer.
2. Right edge swipe: Swipe from the right
edge to launch the Charms bar.
3. Tap/Double tap: In the Start screen, tap
an app to launch it. In Desktop mode,
double-tap an item to launch it.
4. Top edge swipe: In the Start screen, swipe
from the top edge to launch the All apps
bar. In a running app, swipe from the top
edge to view its menu.
5. Left edge swipe: Swipe from the left edge
to shue your running apps.
6. Zoom in: Spread apart your two ngers on
the touchpad.
Package Contents
1. WP300 Touchpad.
2. USB receiver x1.
3. AA battery x2
4. Quick Start Guide .
NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™
operating systems.
Installing the batteries
1. Remove the battery cover.
2. Insert the AA batteries into the slot, taking note of the correct polarity.
NOTE: The included batteries are not chargeable.
Setting up your Touchpad with your Desktop or Notebook PC
1. Remove the USB dongle from underneath the WP300 Touchpad.
NOTE: The USB receiver can be stored underneath the touchpad.
2. Insert the USB receiver into an available USB port on your notebook or desktop
PC.
3. Press the power button underneath the touchpad to power on the touchpad.
4. The system will begin pairing the USB receiver with the touchpad.
Primary Button and Context Menu
• Primary Button
Touchpad and click area: 1-tap with 1 nger
Left click area: 1-click
• Context Menu Button
Touchpad and click area: 1-tap with 2 ngers
Right click area: 1-click
LED Indicator
1. On - Green - Touchpad powered on.
2. O - O - Touchpad powered o.
3. Power saving mode - O - To wake up WP300 from Sleep Mode, click/tap on the
touchpad.
4. Pairing in progress - Flashing green - The touchpad is connecting to the USB
receiver.
5. Low power - Flashing red - Replace the AA batteries.
6. Battery empty - O - No touchpad activity. Replace the AA batteries.
Additional Touchpad Gestures
Fingers Gestures
2-ngers Vertical scroll
Horizontal scroll
3-ngers Brush left / right to go to
previous / next page
Brush up/down for Windows®
8™ Start Screen
4-ngers Brush left / right to go to
previous / next track
Brush up / down to increase /
decrease volume
5-ngers Brush up / down to hide /
resume desktop
Touchpad Gestures
1. Finger slide: Slide your nger across the
touchpad to move the pointer.
2. Right edge swipe: Swipe from the right
edge to launch the Charms bar.
3. Tap/Double tap: In the Start screen, tap
an app to launch it. In Desktop mode,
double-tap an item to launch it.
4. Top edge swipe: In the Start screen, swipe
from the top edge to launch the All apps
bar. In a running app, swipe from the top
edge to view its menu.
5. Left edge swipe: Swipe from the left edge
to shue your running apps.
6. Zoom in: Spread apart your two ngers on
the touchpad.
Package Contents
1. WP300 Touchpad.
2. USB receiver x1.
3. AA battery x2
4. Quick Start Guide .
NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™
operating systems.
Installing the batteries
1. Remove the battery cover.
2. Insert the AA batteries into the slot, taking note of the correct polarity.
NOTE: The included batteries are not chargeable.
Setting up your Touchpad with your Desktop or Notebook PC
1. Remove the USB dongle from underneath the WP300 Touchpad.
NOTE: The USB receiver can be stored underneath the touchpad.
2. Insert the USB receiver into an available USB port on your notebook or desktop
PC.
3. Press the power button underneath the touchpad to power on the touchpad.
4. The system will begin pairing the USB receiver with the touchpad.
Primary Button and Context Menu
• Primary Button
Touchpad and click area: 1-tap with 1 nger
Left click area: 1-click
• Context Menu Button
Touchpad and click area: 1-tap with 2 ngers
Right click area: 1-click
LED Indicator
1. On - Green - Touchpad powered on.
2. O - O - Touchpad powered o.
3. Power saving mode - O - To wake up WP300 from Sleep Mode, click/tap on the
touchpad.
4. Pairing in progress - Flashing green - The touchpad is connecting to the USB
receiver.
5. Low power - Flashing red - Replace the AA batteries.
6. Battery empty - O - No touchpad activity. Replace the AA batteries.
Additional Touchpad Gestures
Fingers Gestures
2-ngers Vertical scroll
Horizontal scroll
3-ngers Brush left / right to go to
previous / next page
Brush up/down for Windows®
8™ Start Screen
4-ngers Brush left / right to go to
previous / next track
Brush up / down to increase /
decrease volume
5-ngers Brush up / down to hide /
resume desktop
Touchpad Gestures
1. Finger slide: Slide your nger across the
touchpad to move the pointer.
2. Right edge swipe: Swipe from the right
edge to launch the Charms bar.
3. Tap/Double tap: In the Start screen, tap
an app to launch it. In Desktop mode,
double-tap an item to launch it.
4. Top edge swipe: In the Start screen, swipe
from the top edge to launch the All apps
bar. In a running app, swipe from the top
edge to view its menu.
5. Left edge swipe: Swipe from the left edge
to shue your running apps.
6. Zoom in: Spread apart your two ngers on
the touchpad.
Taiwan Wireless Statement
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、
加大功率或變更原設計之特性及功能。低功率射頻電機之使用不得影響飛航安全及干擾
合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項
合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、
科學及醫療用電波輻射性電機設備之干擾。
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
• This device may not cause harmful interference; and
• This device must accept any interference received including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with manufacturer’s instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment o and on,
the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit dierent from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Statement of Compliance with EU Directive
This is a Class B product, in a domestic environment, this product may cause radio
interference, in which case the user may be required to take adequate measures.
Declaration of Conformity (RT&TTE directive 1999/5/EC)
The following items were completed and are considered relevant and sucient:
• Essential requirements as in [Article 3]
• Protection requirements for health and safety as in [Article 3.1a].
• Testing for electric safety according to [EN60950].
• Protection requirements for electromagnetic compatibility in [Article 3.1b].
• Testing for electromagnetic compatibility according to [Article 3.1b].
• Eective use of the ratio spectrum as in [Article 3.2].
• Radio test suites according to [EN 300 440].
REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of
Chemicals) regulatory framework, we published the chemical substances in our products at
ASUS REACH website at http://green.asus.com/english/REACH.htm
MANUFACTURER
ASUSTeK Computer Inc.
Tel: +886-2-2894-3447
Address: No. 150, LI-TE RD., PEITOU
TAIPEI 112, TAIWAN
AUTHORISED REPRESENTATIVE IN EUROPE
ASUS Computer GmbH
Address: HARKORT STR. 21-23
40880 RATINGEN, GERMANY
AUTHORISED DISTRIBUTOR IN TURKEY
Penta Teknoloji Urunleri Dagitim Ticaret Anonim Sirketi
Distributor Tel: 0216 645 8200
Address: Dudullu Organize Sanayi Bolgesi Nato Yolu 4. CAD.
No. 1 Dudullu Umraniye
34775 Istanbul, Turkey
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment
to the highest standards for protecting our environment. We believe
in providing solutions for you to be able to responsibly recycle our
products, batteries, other components, as well as the packaging
materials. Please go to http://csr.asus.com/english/Takeback.htm for the
detailed recycling information in dierent regions.
WP300 Touchpad Q8103 / First Edition / February 2013
China RoHS EFUP
Labelling - 10 Years
C-Tick Mark
ITALIAN
ITALIAN
ITALIAN
ITALIAN
Package Contents
1. WP300 Touchpad.
2. USB receiver x1.
3. AA battery x2
4. Quick Start Guide .
NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™
operating systems.
Installing the batteries
1. Remove the battery cover.
2. Insert the AA batteries into the slot, taking note of the correct polarity.
NOTE: The included batteries are not chargeable.
Setting up your Touchpad with your Desktop or Notebook PC
1. Remove the USB dongle from underneath the WP300 Touchpad.
NOTE: The USB receiver can be stored underneath the touchpad.
2. Insert the USB receiver into an available USB port on your notebook or desktop
PC.
3. Press the power button underneath the touchpad to power on the touchpad.
4. The system will begin pairing the USB receiver with the touchpad.
Primary Button and Context Menu
• Primary Button
Touchpad and click area: 1-tap with 1 nger
Left click area: 1-click
• Context Menu Button
Touchpad and click area: 1-tap with 2 ngers
Right click area: 1-click
LED Indicator
1. On - Green - Touchpad powered on.
2. O - O - Touchpad powered o.
3. Power saving mode - O - To wake up WP300 from Sleep Mode, click/tap on the
touchpad.
4. Pairing in progress - Flashing green - The touchpad is connecting to the USB
receiver.
5. Low power - Flashing red - Replace the AA batteries.
6. Battery empty - O - No touchpad activity. Replace the AA batteries.
Additional Touchpad Gestures
Fingers Gestures
2-ngers Vertical scroll
Horizontal scroll
3-ngers Brush left / right to go to
previous / next page
Brush up/down for Windows®
8™ Start Screen
4-ngers Brush left / right to go to
previous / next track
Brush up / down to increase /
decrease volume
5-ngers Brush up / down to hide /
resume desktop
Touchpad Gestures
1. Finger slide: Slide your nger across the
touchpad to move the pointer.
2. Right edge swipe: Swipe from the right
edge to launch the Charms bar.
3. Tap/Double tap: In the Start screen, tap
an app to launch it. In Desktop mode,
double-tap an item to launch it.
4. Top edge swipe: In the Start screen, swipe
from the top edge to launch the All apps
bar. In a running app, swipe from the top
edge to view its menu.
5. Left edge swipe: Swipe from the left edge
to shue your running apps.
6. Zoom in: Spread apart your two ngers on
the touchpad.
Package Contents
1. WP300 Touchpad.
2. USB receiver x1.
3. AA battery x2
4. Quick Start Guide .
NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™
operating systems.
Installing the batteries
1. Remove the battery cover.
2. Insert the AA batteries into the slot, taking note of the correct polarity.
NOTE: The included batteries are not chargeable.
Setting up your Touchpad with your Desktop or Notebook PC
1. Remove the USB dongle from underneath the WP300 Touchpad.
NOTE: The USB receiver can be stored underneath the touchpad.
2. Insert the USB receiver into an available USB port on your notebook or desktop
PC.
3. Press the power button underneath the touchpad to power on the touchpad.
4. The system will begin pairing the USB receiver with the touchpad.
Primary Button and Context Menu
• Primary Button
Touchpad and click area: 1-tap with 1 nger
Left click area: 1-click
• Context Menu Button
Touchpad and click area: 1-tap with 2 ngers
Right click area: 1-click
LED Indicator
1. On - Green - Touchpad powered on.
2. O - O - Touchpad powered o.
3. Power saving mode - O - To wake up WP300 from Sleep Mode, click/tap on the
touchpad.
4. Pairing in progress - Flashing green - The touchpad is connecting to the USB
receiver.
5. Low power - Flashing red - Replace the AA batteries.
6. Battery empty - O - No touchpad activity. Replace the AA batteries.
Additional Touchpad Gestures
Fingers Gestures
2-ngers Vertical scroll
Horizontal scroll
3-ngers Brush left / right to go to
previous / next page
Brush up/down for Windows®
8™ Start Screen
4-ngers Brush left / right to go to
previous / next track
Brush up / down to increase /
decrease volume
5-ngers Brush up / down to hide /
resume desktop
Touchpad Gestures
1. Finger slide: Slide your nger across the
touchpad to move the pointer.
2. Right edge swipe: Swipe from the right
edge to launch the Charms bar.
3. Tap/Double tap: In the Start screen, tap
an app to launch it. In Desktop mode,
double-tap an item to launch it.
4. Top edge swipe: In the Start screen, swipe
from the top edge to launch the All apps
bar. In a running app, swipe from the top
edge to view its menu.
5. Left edge swipe: Swipe from the left edge
to shue your running apps.
6. Zoom in: Spread apart your two ngers on
the touchpad.
Package Contents
1. WP300 Touchpad.
2. USB receiver x1.
3. AA battery x2
4. Quick Start Guide .
NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™
operating systems.
Installing the batteries
1. Remove the battery cover.
2. Insert the AA batteries into the slot, taking note of the correct polarity.
NOTE: The included batteries are not chargeable.
Setting up your Touchpad with your Desktop or Notebook PC
1. Remove the USB dongle from underneath the WP300 Touchpad.
NOTE: The USB receiver can be stored underneath the touchpad.
2. Insert the USB receiver into an available USB port on your notebook or desktop
PC.
3. Press the power button underneath the touchpad to power on the touchpad.
4. The system will begin pairing the USB receiver with the touchpad.
Primary Button and Context Menu
• Primary Button
Touchpad and click area: 1-tap with 1 nger
Left click area: 1-click
• Context Menu Button
Touchpad and click area: 1-tap with 2 ngers
Right click area: 1-click
LED Indicator
1. On - Green - Touchpad powered on.
2. O - O - Touchpad powered o.
3. Power saving mode - O - To wake up WP300 from Sleep Mode, click/tap on the
touchpad.
4. Pairing in progress - Flashing green - The touchpad is connecting to the USB
receiver.
5. Low power - Flashing red - Replace the AA batteries.
6. Battery empty - O - No touchpad activity. Replace the AA batteries.
Additional Touchpad Gestures
Fingers Gestures
2-ngers Vertical scroll
Horizontal scroll
3-ngers Brush left / right to go to
previous / next page
Brush up/down for Windows®
8™ Start Screen
4-ngers Brush left / right to go to
previous / next track
Brush up / down to increase /
decrease volume
5-ngers Brush up / down to hide /
resume desktop
Touchpad Gestures
1. Finger slide: Slide your nger across the
touchpad to move the pointer.
2. Right edge swipe: Swipe from the right
edge to launch the Charms bar.
3. Tap/Double tap: In the Start screen, tap
an app to launch it. In Desktop mode,
double-tap an item to launch it.
4. Top edge swipe: In the Start screen, swipe
from the top edge to launch the All apps
bar. In a running app, swipe from the top
edge to view its menu.
5. Left edge swipe: Swipe from the left edge
to shue your running apps.
6. Zoom in: Spread apart your two ngers on
the touchpad.
Package Contents
1. WP300 Touchpad.
2. USB receiver x1.
3. AA battery x2
4. Quick Start Guide .
NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™
operating systems.
Installing the batteries
1. Remove the battery cover.
2. Insert the AA batteries into the slot, taking note of the correct polarity.
NOTE: The included batteries are not chargeable.
Setting up your Touchpad with your Desktop or Notebook PC
1. Remove the USB dongle from underneath the WP300 Touchpad.
NOTE: The USB receiver can be stored underneath the touchpad.
2. Insert the USB receiver into an available USB port on your notebook or desktop
PC.
3. Press the power button underneath the touchpad to power on the touchpad.
4. The system will begin pairing the USB receiver with the touchpad.
Primary Button and Context Menu
• Primary Button
Touchpad and click area: 1-tap with 1 nger
Left click area: 1-click
• Context Menu Button
Touchpad and click area: 1-tap with 2 ngers
Right click area: 1-click
LED Indicator
1. On - Green - Touchpad powered on.
2. O - O - Touchpad powered o.
3. Power saving mode - O - To wake up WP300 from Sleep Mode, click/tap on the
touchpad.
4. Pairing in progress - Flashing green - The touchpad is connecting to the USB
receiver.
5. Low power - Flashing red - Replace the AA batteries.
6. Battery empty - O - No touchpad activity. Replace the AA batteries.
Additional Touchpad Gestures
Fingers Gestures
2-ngers Vertical scroll
Horizontal scroll
3-ngers Brush left / right to go to
previous / next page
Brush up/down for Windows®
8™ Start Screen
4-ngers Brush left / right to go to
previous / next track
Brush up / down to increase /
decrease volume
5-ngers Brush up / down to hide /
resume desktop
Touchpad Gestures
1. Finger slide: Slide your nger across the
touchpad to move the pointer.
2. Right edge swipe: Swipe from the right
edge to launch the Charms bar.
3. Tap/Double tap: In the Start screen, tap
an app to launch it. In Desktop mode,
double-tap an item to launch it.
4. Top edge swipe: In the Start screen, swipe
from the top edge to launch the All apps
bar. In a running app, swipe from the top
edge to view its menu.
5. Left edge swipe: Swipe from the left edge
to shue your running apps.
6. Zoom in: Spread apart your two ngers on
the touchpad.
EEE Yönetmeliğine Uygundur.
CAUTION: Any changes of modifications not expressly approved by the
grantee of this device could void the user’s authority to operate the
equipment.