Primax Electronics TCTL460 Pen Tablet User Manual Bamboo User s Manual for Windows Macintosh

Primax Electronics Ltd Pen Tablet Bamboo User s Manual for Windows Macintosh

Manual

User’s manual for Windows & Macintosh®®Bamboo Touch (CTT-460)Bamboo Pen (CTL-460)Bamboo & Bamboo Fun (CTH-460, CTH-461, CTH-661)Setting upNavigate with touchCustomize touchExpressKeysUse a penCustomize a penTroubleshootingContents IndexContents 1Index1
Contents IndexContents 2Index2BambooUser’s Manual for Windows® & Macintosh® Version 1.0, Rev E1209Copyright © Wacom Co., Ltd., 2009All rights reserved. No part of this manual may be reproduced except for your express personal use. Wacom reserves the right to revise this publication without obligation to provide notification of such changes. Wacom does its best to provide current and accurate information in this manual. However, Wacom reserves the right to change any specifications and product configurations at its discretion, without prior notice and without obligation to include such changes in this manual.The above year indicates when this manual was prepared. However, the date of release to the users of the “manual” is simultaneous with the introduction into the market of the applicable Wacom product.Reuse, recycling, and recovery. You are urged to recycle this product when replacing it with a newer product or when it has outlived its useful life by bringing it to an appropriate collection point for recyclable materials in your community or region. By doing this, you can help improve the environment of your community as well as minimize the potential negative effects created should any hazardous substance that may possibly be present within waste material reach the environment during the disposal process.Within the European Union, users are required not to dispose of Waste Electrical and Electronic Equipment (WEEE) as unsorted municipal waste, according to the Directive 2002/96/EC of the European Parliament and of the Council of 27 January 2003, or the corresponding local laws of the Member States. Products for which this is applicable will be marked with the WEEE symbol shown at the beginning of this note unless this is not feasible because of the size or the function of the product. Wacom products are subject to the Directive 2002/96/EC and therefore you should always collect them separately and bring them to the appropriate collection point in your community or region.Wacom tablet products comply with the European Union RoHS Directive 2002/95/EC (RoHS Directive).Bamboo is a trademark and Wacom is a registered trademark of Wacom Co., Ltd.Adobe, Photoshop, and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Microsoft, Windows, and Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Apple, the Apple logo, and Macintosh are registered trademarks of Apple Computer, Inc., registered in the U.S. and other countries. Any additional company and product names mentioned in this documentation may be trademarked and/or registered as trademarks. Mention of third-party products is for information purposes only and constitutes neither an endorsement nor a recommendation. Wacom assumes no responsibility with regard to the performance or use of these products.ExpressKey is a registered trademark of Ginsan Industries, Inc., and is used with permission.
Contents IndexContents 3Index3TABLE OF CONTENTSAbout the manual 5Navigating the manual 6YOUR BAMBOO 7Identify your tablet model 7Bamboo Touch tablet 8Bamboo & Bamboo Fun tablets 9Bamboo Pen tablet 10Pen 11Pen holder 11SETTING UP YOUR BAMBOO 12Ergonomics 12Configuring the tablet orientation 14Understanding the tablet active area 15Working with multiple monitors 17Control panel basics 17USING YOUR BAMBOO 18The touch experience with Bamboo 18Navigating with touch 19Customizing touch 25ExpressKey basics 26Customizing the ExpressKeys 26The pen experience with Bamboo 27Holding the pen 27Using the pen on the tablet 28Positioning 28Clicking 30Dragging 30Using the pen buttons 31Writing and drawing with pressure sensitivity 32Erasing 33Eye-hand coordination exercise 34Customizing pen input 34CUSTOMIZING YOUR BAMBOO 35Opening the control panel 35Control panel overview 36Customize your touch experience 37Setting the touch speed 37Setting the touch functions 38Setting tablet and ExpressKey functions 39Disabling touch 40Customize your pen experience 41Setting the tip and eraser feel, and double-click distance 42Setting the pen button functions 43Setting the tablet mapping 44Portion of screen area 46Portion of tablet area 47Setting the pen speed in mouse mode 48Customizing the Pop-up Menu 49Button functions 50PROBLEMS WITH YOUR BAMBOO? 54Testing your tablet 55Testing a pen 56Troubleshooting tables 57General problems 57Touch input problems 58Pen input problems 59Windows-specific problems 60Mac-specific problems 61Technical support options 63Obtaining driver downloads 64APPENDIX 65Caring for Bamboo 66Replacing the pen nib 66Uninstalling the software 67Pen and digital ink capabilities in Windows Vista 68About the Windows Vista Tablet PC Input Panel 69Product specifications 70General specifications 70Bamboo Touch tablet (model CTT-460) 70Bamboo tablet (model CTH-460) 70
Contents IndexContents 4Index4Pen (model LP-160E), for Bamboo 71Bamboo Fun small tablet (model CTH-461) 71Bamboo Fun medium tablet (model CTH-661) 71Pen (model LP-161E), for Bamboo Fun 71Bamboo Pen tablet (model CTL-460) 72Pen (model LP-160), for Bamboo Pen 72Product information 73Ordering parts and accessories 73Radio and television interference 74FCC notice 74Industry Canada (Canada only) 75CE declaration 75Precautions 76Warnings 76Cautions 77License and Warranties (Worldwide, except for Europe, Africa and Middle East) 78Software License 78Limited Warranty 78Warranty Service in the U.S.A. and Canada 79Warranty on Sales outside of the U.S.A. and Canada 80Licence warranty conditions(Europe, Africa and Middle East) 81Software Licence Agreement 81Limited Warranty 82GLOSSARY 84INDEX 87
Contents IndexContents 5Index5ABOUT THE MANUALThis manual provides quick access to information about Bamboo. The information is common to Windows and Macintosh computers and Windows screen captures are shown, unless otherwise noted.• Go directly to table of contents or index topics by clicking on them.•Your Bamboo introduces you to the many features of the Bamboo tablet.•Setting up your Bamboo is a quick guide to understanding how the tablet works.•Using your Bamboo gives you the basics on working with your tablet. It describes how to use Bamboo, and includes exercises for new users.•Customizing your Bamboo describes how to optimize Bamboo for the way you like to work.•Problems with your Bamboo? Then check this section for test and troubleshooting guidelines, and find answers to most common questions.•The appendix includes tips on product care, a how-to on uninstalling the software, your license and warranty, and more. Also included is an overview of the pen and digital inking capabilities found in Microsoft Windows Vista.Note: This manual does not describe how to install your Wacom tablet. Please refer to your product Quick Start Guide and to the automated software installer (located on the Bamboo Installation CD) for details.If you are new to electronic documentation, be sure to read navigating the manual.•SMALL CAPITAL LETTERS are used to identify the names of keyboard keys, dialog boxes, and control panel options.• You can use your viewer zoom-in tool to increase the size of the manual on your display screen.• The following information is not included with this product: information about your specific computer hardware or operating system, or information about your application software. Your best source for this information is the set of manuals and discs that came with your hardware, operating system, or application.• Pen-equipped models: In addition to the built-in inking support found within Microsoft Windows Vista, many graphics applications also support pressure sensitivity and the pen eraser (when equipped). You can find a listing of applications that support these features on Wacom’s web site (see product information).• For information on how best to use Bamboo features within a specific application, see the instructions in that application’s manuals.Wacom’s philosophy is to continually improve all of its products. As a result, engineering changes and improvements are made from time to time. Therefore, some changes, modifications, and improvements may not be covered in this manual.
Contents IndexContents 6Index6NAVIGATING THE MANUALUse the navigation controls to move through the manual:Go to front page.Go to table of contents.Go to index.Go back to previous view.Page back, or page forward.Go to topic.Topic continued.Adobe® Reader® provides additional tools for using and printing the manual. See the Adobe Reader help for more information.ContentsIndextopic
Contents IndexContents 7Index7YOUR BAMBOOThis section introduces you to Bamboo. The quickest way to learn about your Bamboo tablet is to become familiar with its appearance and features.• Not all product models are available in all regions.• Your Bamboo tablet cannot be used with other Wacom pens or input devices, including those from a previous version Bamboo tablet. Nor can a pen from your new Bamboo tablet be used with other Wacom tablets or a previous version Bamboo tablet.Identify your tablet modelBamboo Touch tabletBamboo & Bamboo Fun tabletsBamboo Pen tabletPenPen holderIDENTIFY YOUR TABLET MODELEach tablet model within the Bamboo family has a specific feature set.Icons are located near some of the topic headings in this manual to help you quickly identify sections that have information specific to touch or pen input.• Touch input is identified by this icon: • Pen input is identified by this icon: Icons do not appear in common sections that may apply to all Bamboo tablet models.Model-specific notes may be used as necessary.TABLET MODEL TOUCH INPUT PEN INPUT EXPRESSKEYSBamboo Touch (model CTT-460) XXBamboo (model CTH-460) XXXBamboo Fun small (model CTH-461) XXXBamboo Fun medium (model CTH-661) XXXBamboo Pen (model CTL-460) X
Contents IndexContents 8Index8BAMBOO TOUCH TABLETActive areaUse single- or two-finger input for clicking and navigating with touch. Use two-finger input for gestures that control other functions, such as scrolling and zooming. Learn about the touch experience with Bamboo.Customizable ExpressKeysUSB cableBamboo Touch (model CTT-460) shown.Status LEDGlows white when your Bamboo tablet is connected to an active USB port.Brightens when you touch the active area of the tablet or press an ExpressKey.
Contents IndexContents 9Index9BAMBOO & BAMBOO FUN TABLETSActive areaIncludes the touch sensor. Use single- or two-finger input for clicking and navigating with touch. Use two-finger input for gestures that control other functions, such as scrolling and zooming. Learn about the touch experience with Bamboo.This is also the active area for pen input. Learn about your pen and the pen experience with Bamboo.Customizable ExpressKeysUSB cableBamboo (model CTH-460) shown.Pen holderStatus LEDGlows white when your Bamboo tablet is connected to an active USB port. Brightens when you touch the active area or press an ExpressKey.Glows amber when the pen is active, and brightens when the pen tip touches the tablet surface or when you press a pen button.
Contents IndexContents 10Index10BAMBOO PEN TABLETUSB cableBamboo Pen (model CTL-460) shown.Status LEDGlows white when your Bamboo tablet is connected to an active USB port. Brightens when the pen is active.Pen holderActive areaThis is the active area for pen input. Learn about your pen and the pen experience with Bamboo.
Contents IndexContents 11Index11PEN PEN HOLDERUse the pen holder (when equipped) to store the pen when it is not in use. The pen holder does not apply to Bamboo Touch.Eraser (when equipped)Pen buttonsReplaceable nib(pen tip)Pen (when equipped) A pressure-sensitive freehand tool for image editing and creating natural-looking pen strokes. It is also efficient for document annotation and taking notes in applications that support handwriting recognition.The pen is cordless and battery free. It is ideally suited to enhance your workflow by enabling the pen and digital ink features found within Microsoft Windows Vista and Office 2007. Take advantage of digital mark-up for collaborative editing and use digital ink to take notes in applications that support handwriting recognition.Important: When not in use, place the pen into the pen holder or lay it flat on your desk. The eraser end of the pen should be inserted first into the loop. To maintain the sensitivity of your pen, do not store the pen in a container where it will rest on the tip or eraser.Leaving the pen on the tablet may interfere with screen cursor positioning when using other pointing devices, or may prevent your computer from going to sleep.Insert the pen into the pen holder as shown.• The eraser end of the pen should be inserted first into the loop.• Do not wedge the pen buttons inside the loop, otherwise they may be continually depressed and possibly fail.Important: You can also lay the pen flat on your desk. Leaving the pen on the tablet may interfere with screen cursor positioning when using other pointing devices, or may prevent your computer from going to sleep.Wacom recommends that you do not store the pen in a stand or holder other than the one provided with your Bamboo tablet. The pen may be damaged if it falls out of an unsuitable stand. The sensitivity of your pen may be affected if the pen is stored in a container where it rests on the tip or eraser.
Contents IndexContents 12Index12SETTING UP YOUR BAMBOOTo minimize fatigue, comfortably organize your work area. Position your tablet, pen (if equipped), and keyboard for easy access without unnecessary reaching. Adjust your monitor so you can view it comfortably with a minimum of eyestrain. For best results, position the tablet so the screen cursor follows the same direction as your hand movements on the tablet.ErgonomicsConfiguring the tablet orientationUnderstanding the tablet active areaWorking with multiple monitorsControl panel basicsERGONOMICS Note regarding RSI: Wacom makes no representation, promise or guarantee that Wacom products will cure or prevent, in whole or in part, mouse-induced repetitive stress symptoms, injuries or conditions. Individual results may vary. Always obtain competent medical advice to determine the most appropriate treatment for your specific situation.• Take short breaks between tasks to stretch and relax your muscles.• Use a gentle grip when working with the pen.• When not actively working with touch, you can rest your fingers and palm on the tablet. Touch data will not be sent when you touch the tablet active area with more than two fingers.• Alternate tasks and tools throughout the day.• Maintain a good posture at all times. Minimize awkward postures and repetitive movements that cause discomfort.• Change your position if you feel any discomfort due to your work position.• For right-handed use, position the tablet so the input (active) area is located to the right of the ExpressKeys. If using the tablet as a primary pointing device and mouse replacement, consider placing it to the right of your keyboard.• For left-handed use, position the tablet with the input area to the left of the ExpressKeys. See configuring the tablet orientation for details. If using the tablet as a primary pointing device and mouse replacement, consider placing it to the left of your keyboard.• If using the tablet primarily as a creative tool, consider placing the tablet below the keyboard, centered with respect to your monitor.
Contents IndexContents 13Index13As you work, you will discover many ways of interacting with your Bamboo tablet. For example:For details on these and other ways to work with your tablet, see the touch experience with Bamboo or the pen experience with Bamboo.AnnotationSimplify document reviews by using the pen (when equipped) to digitally mark-up and annotate documents.PresentationQuickly swipe (flick) two fingers across the tablet surface to quickly move between slides in a presentation.Photo editingUse the pressure-sensitive pen (when equipped) to edit images within a photo or image editing application.Visual browsingUse two fingers on the tablet surface to scroll through and navigate visual media within an application.
Contents IndexContents 14Index14CONFIGURING THE TABLET ORIENTATIONYou are prompted to choose a default tablet orientation during the initial installation process using the Bamboo Installation CD. At the log-in and user switching screens, the tablet orientation will use the default orientation that was selected when the driver was installed. To change the default orientation, reinstall the driver using the Bamboo Installation CD and when prompted select a new default orientation.You can also change how your tablet is oriented using the following procedure. However, the default orientation used at the log-in screen will not be affected.To set up your Bamboo for right-handed operation:•Open the Bamboo control panel and select the TABLET tab. Choose the RIGHT HANDED option. The tablet driver automatically configures all aspects of the tablet for correct right-handed use.• Next, physically rotate your tablet so the tablet ExpressKeys are positioned to the left.To set up your Bamboo for left-handed operation:•Open the control panel and select the TABLET tab. Choose the LEFT HANDED option. The tablet driver automatically configures all aspects of the tablet for correct left-handed use.• Next, physically rotate your tablet so the tablet ExpressKeys are positioned to the right.
Contents IndexContents 15Index15UNDERSTANDING THE TABLET ACTIVE AREADepending on your tablet model, Bamboo can accept touch input, pen input, or both. Note, however, that pen and touch input cannot be used at the same time. Touch inputOn touch-sensitive tablet models, slide your finger across the active area to position the screen pointer.Use single- or two-finger input for clicking and navigating.Use two-finger input for gestures that control other functions, such as scrolling and zooming.Learn about the touch experience with Bamboo.Tablet active areaThe area of your Bamboo tablet that senses touch or pen input.For tablet models that support both pen and touch input:• Touch input is disengaged whenever the pen tip or eraser is within the tablet proximity range. Lift the pen and your hand away from the tablet active area to re-enable touch input.•The pen input area is slightly larger than the touch sensor area.
Contents IndexContents 16Index16Tablet active areaThe area of your Bamboo tablet that senses touch or pen input.For tablet models that support both pen and touch input:• Touch input is disengaged whenever the pen tip or eraser is within the tablet proximity range. Lift the pen and your hand away from the tablet active area to re-enable touch input.• The pen input area is slightly larger than the touch sensor area.Pen inputThe pen works only on the active area of tablet models that support pen input.Wherever you place the pen on the tablet, the screen pointer will jump to the corresponding point on the screen. The screen pointer indicates pen position, and follows the movement of the pen across the tablet surface. Learn about the pen experience with Bamboo.Note: For tablets that support pen input, the active area is a mapped representation of your computer screen(s). By default it uses the entire screen or all screens if you have multiple displays. You can customize the mapping relationship for pen input by setting the tablet mapping.
Contents IndexContents 17Index17WORKING WITH MULTIPLE MONITORSIf your computer is equipped with more than one monitor, Bamboo will map to your monitors based upon how they are configured in the display properties control panel.• If more than one monitor is in use and you are in extended monitor mode, the tablet maps to all monitors as if they were one large display. The below image illustrates a tablet mapping to the entire system desktop, which is displayed on the two monitors.• If your monitors are in mirror mode (both monitors display the same content), the tablet maps to the entire space on each monitor and the screen cursor is displayed on each monitor simultaneously.See your hardware and operating system documentation for details on configuring your computer and operating system for use with multiple monitors.Note: The pen can also be customized to map to a single monitor, or to a portion of the monitor area. See setting the tablet mapping.CONTROL PANEL BASICSAfter mastering the basics of using your Bamboo tablet, you may want to customize the way touch or pen input works. The Bamboo control panel is where you customize your Bamboo tablet settings.Opening the control panelControl panel overviewMonitor 1 Monitor 2
Contents IndexContents 18Index18USING YOUR BAMBOOIf you are new to using Bamboo, read the following sections.The touch experience with BambooThe pen experience with BambooTHE TOUCH EXPERIENCE WITH BAMBOOBamboo is designed to enhance the way you work. Touch input enables you to interact with a computer using only your fingertips on the Bamboo tablet.First learn the basic actions to navigate and perform typical mouse operations. Then learn the gestural movements to control other functions such as scrolling, zooming, and rotating.Touch input is activated whenever you touch the tablet’s active area.• One- and two-finger input only is recognized by the tablet. When not actively working with touch, you can rest your fingers and palm on the tablet. Touch data will not be sent when you touch the tablet active area with more than two fingers.• When using two-finger input methods, you can generally position your fingers as far apart as you find comfortable. However, be aware that touching the tablet with your fingers set too closely together may be interpreted as coming from a single finger, or confused with which finger initiated or performed an action or gesture.• As you learn the different input methods, experiment with what works best for you. Take care to prevent accidental touch input. For example, if your small finger or the palm of your hand touches the active area of the tablet while you are navigating or performing a touch action, then your input may be interrupted or you may trigger an unanticipated right-click.Note: For tablet models that support both pen and touch input, the pen disengages touch input whenever the pen tip or eraser is within the tablet proximity range. Lift the pen and your hand away from the tablet active area to re-enable touch input.Navigating with touchCustomizing touchExpressKey basicsCustomizing the ExpressKeys
Contents IndexContents 19Index19NAVIGATING WITH TOUCHThe touch input feature of your Bamboo tablet enables you to control a computer using only your fingertips on the tablet surface. See understanding the tablet active area.Before learning how to control your computer with touch input, familiarize yourself with the following concepts:You can customize your touch experience and also use the ExpressKeys to perform some touch functions.CONCEPT DESCRIPTIONTrack Touch and move a single finger across the tablet surface.Tap Touch and lift a single finger from the tablet.Pan Touch the tablet surface with two fingers and move them in the same direction.Swipe Touch the tablet surface with two fingers and move them in the same direction at a relatively high speed.Pinch Touch the tablet with two fingers spaced slightly apart. While still touching the tablet surface, move or ‘pinch’ your fingers together.Expand Touch the tablet with two fingers spaced closely together. While still touching the tablet surface, move your fingers apart.Twist Touch the tablet with two fingers spaced slightly apart and move (rotate) them in a circular fashion, or move them in opposing directions. You can also hold one finger stationary and track your other finger around the stationary finger.
Contents IndexContents 20Index20Touch input options can be enabled or disabled within the Bamboo control panel and are dependent upon application support. Touch actions and gestures are available when selected in the TOUCH FUNCTIONS tab.BASIC ACTIONS enable you to navigate and perform typical mouse operations.TrackUse a single finger to move the screen cursor. Touch and slide your finger across the tablet surface.1A TAP WITH ONE FINGER Click (single-finger tap)Using a single finger, track to an item. Lift your finger and tap to select.Alternatively, you can track to an item and then press an ExpressKey set to CLICK.1A, 1B234567A, 7B89A, 9B10
Contents IndexContents 21Index211B TAP WITH ONE FINGER Double-clickUsing a single finger, track to an item. Lift your finger and tap twice.2ADD TOUCH TO THE LEFT Select and drag (add touch to left)Using a single finger, track to an item. Select by touching your thumb or a second finger to the left of that finger. (If you will be dragging an item or selecting blocks of text, we recommend using two fingers instead of your finger and thumb).• To move the selected item, continue moving both fingers across the tablet.• To highlight a text block, continue moving both fingers across the tablet as you select text.• You can also extend a drag without releasing the selection. To do this, lift the first finger and move your second finger to a new position. Then again touch the first finger to the tablet and continue to drag with both fingers.Lift your thumb or second finger to release.Note: If the tablet is set for left-handed orientation, touch to the right of the primary finger.3TAP WITH TWO FINGERS Right-click (two-finger tap)To right-click and bring up a context menu at the screen cursor position, tap the tablet surface with two fingers spaced slightly apart. Use a quick tapping motion with both fingers at the same time.You can then track to an option in the menu and select it by tapping your finger.Alternatively, you can open a context menu by tracking to an item and then pressing an ExpressKey set to RIGHT CLICK.
Contents IndexContents 22Index224ADD TOUCH TO THE RIGHT Right-click (add touch to right)Using a single finger, track to an item. Then with a second finger touch and release to the right of that finger. Releasing your finger issues a right-click and brings up a context menu at the screen cursor position.You can then track to an option in the menu and select it by tapping your finger.Note: If the tablet is set for left-handed orientation, touch to the left of the primary finger.5DRAG Select and drag (DRAG LOCK disabled)Using a single finger, tap on an item to select. Then track (slide) your finger across the tablet to drag. Lift your finger to release the item. You can also select and drag with two fingers.Alternatively, you can drag by tracking to an item, pressing an ExpressKey set to CLICK, and then continuing to move your finger across the tablet surface. Release the ExpressKey to release the item.Tip: You can select and drag multiple items on the system desktop.• For Windows, press the CTRL or SHIFT key as you tap to select multiple items.• For Macintosh, press the SHIFT or COMMAND key as you tap to select multiple items.6DRAG LOCK Drag lock (DRAG LOCK enabled)Using a single finger, tap on an item to select. Then track (slide) your finger across the tablet to drag. Tap again to release the item.
Contents IndexContents 23Index23GESTURES enable you to control functions such as scroll, zoom, and rotation.7A GESTURES SCROLL ScrollPlace two fingers on the tablet surface. Using a smooth motion, move your fingers together in parallel.• Scroll up by moving your fingers in an upward motion.• Scroll down by moving your fingers in a downward motion.• Scroll left by moving your fingers in a leftward motion.• Scroll right by moving your fingers in a rightward motion.Tips: Flick your fingers at the end of the gesture to continue scrolling for a short time after your fingers leave the tablet.For windows that scroll vertically and horizontally, move your fingers in any direction and the document view will follow.7B GESTURES SCROLL Fast scrollQuickly move (or flick) two fingers together, lifting your fingers at the end of the motion.• Fast scroll up by flicking your fingers in an upward motion.• Fast scroll down by flicking your fingers in a downward motion.Note: Fast scrolling works only for vertical scrolling.
Contents IndexContents 24Index248GESTURES ZOOM ZoomFirst place two fingers on the tablet surface.• Zoom-in by moving (expanding) your fingers away from one another.• Zoom-out by moving (pinching) your fingers toward one another.Note: If zoom functions do not operate correctly within Adobe Photoshop®, verify that the ZOOM WITH SCROLL WHEEL function is selected within the Photoshop PREFERENCES options.9A GESTURES ROTATE Rotate (two finger rotate)Place two fingers diagonally on the tablet surface and then rotate them clockwise or counter-clockwise.For best recognition of this gesture, start with your fingers positioned diagonally on the tablet surface and keep them at least 25 mm (1 inch) apart.Note: The rotation gesture may work differently depending on the application you are working with. For example, rotation may work smoothly, in 90-degree increments, or not at all.
Contents IndexContents 25Index25CUSTOMIZING TOUCHUse the Bamboo control panel to customize the touch input options for the way you like to interact with your tablet and computer.Opening the control panelControl panel overviewCustomize your touch experience9B GESTURES ROTATE Rotate (rotate around finger)Place two fingers diagonally on the tablet surface. Keep one finger stationary and move the other finger around it.For best recognition of this gesture, start with your fingers positioned diagonally on the tablet surface and keep them at least 25 mm (1 inch) apart.Note: The rotation gesture may work differently depending on the application you are working with. For example, rotation may work smoothly, in 90-degree increments, or not at all.10 GESTURES FORWARD & BACK Forward or Back (swipe right or left)Quickly swipe (or flick) two fingers together, lifting your fingers at the end of the motion.• Send a ‘Forward’ command in most browsers and picture viewers by flicking your fingers in a generally rightward motion.• Send a ‘Back’ command in most browsers and picture viewers by flicking your fingers in a generally leftward motion.Tips:Swiping is similar to using the right and left arrow keys in document viewers.Use the swipe gestures to page forward or back in most web browsers.
Contents IndexContents 26Index26EXPRESSKEY BASICSMost Bamboo tablet models feature customizable ExpressKeys. Note that ExpressKeys are not available for Bamboo Pen (model CTL-460).CUSTOMIZING THE EXPRESSKEYSUse the Bamboo control panel to customize the ExpressKey options.Opening the control panelControl panel overviewSetting tablet and ExpressKey functionsExpressKeysPress individual keys to perform frequently used functions or keystrokes. ExpressKeys can also be used to modify touch or pen input properties as you work.Consider some of these alternate ways of using the keys:• Set a key to a commonly used keyboard shortcut.• Set a key to launch a commonly used file or application, such as your email program.• Choose from any of the other available functions.Note: The ExpressKeys can be operated in combination with one another. For example, if you program one key to simulate the CTRL key and another to simulate an ALT keystroke, when you press both keys at the same time a CTRL+ALT is simulated.ExpressKey default settings:TOUCH TOGGLE (FORWARD for Bamboo Touch)BACKRIGHT CLICKCLICKExpressKeys configuration when positioned on the right side of the tablet (LEFT HANDED orientation)ExpressKeys configuration when positioned on the left side of the tablet (RIGHT HANDED orientation)
Contents IndexContents 27Index27THE PEN EXPERIENCE WITH BAMBOOBamboo is designed to enhance the way you work. Bamboo tablet models equipped for pen input enable you to interact with a computer using the pen on the active area of the tablet. The pen is cordless, battery free, and pressure-sensitive.Note: For Bamboo tablets that support both pen and touch input, the pen disengages touch input whenever the pen tip or eraser is within the tablet proximity range. Lift the pen and your hand away from the tablet active area to re-enable touch input. If you experience unintended touch input from your hand, manually disable touch by pressing an Expresskey set to Touch Toggle. After you are done working with the pen, press the ExpressKey again to re-enable touch. See also setting tablet and ExpressKey functions.Holding the penUsing the pen on the tabletCustomizing pen inputExpressKey basicsCustomizing the ExpressKeysCustomizing the Pop-up MenuHOLDING THE PENHold the pen like you would hold a normal pen or pencil. Make sure the pen buttons are in a convenient location where you can toggle them with your thumb or forefinger, but not accidently press them while drawing or positioning with the pen. Tilt the pen in any way that feels most comfortable. Important: When not in use, place the pen in the pen holder or lay it flat on your desk. To maintain the sensitivity of your pen, do not store the pen in a container where it will rest on the tip or eraser (when equipped). Leaving the pen on the tablet may interfere with screen cursor positioning when using other pointing devices, or may prevent your computer from going to sleep.Position for drawing and navigation Position for erasingWhen you are not using the pen, store it in the pen holder. The eraser end of the pen should be inserted first into the loop.
Contents IndexContents 28Index28USING THE PEN ON THE TABLETThere are four basic techniques for using the pen: positioning, clicking, double-clicking, and dragging. If you are unfamiliar with using the pen, try the exercises on the following pages.PositioningClickingDraggingUsing the pen buttonsWriting and drawing with pressure sensitivityErasingEye-hand coordination exercisePOSITIONINGThe pen is used to position the pointer (or cursor) on your screen. Lift the pen and place the pen tip on the tablet active area. The cursor instantly jumps to the new location.Move the screen cursor by moving the pen across the tablet surface. Do this without touching the tablet surface, but while still keeping the pen tip within proximity of the tablet.To select an icon or folder, use your pen to position the screen cursor over the object. Press down to select.Tips: If you find that using a pen is somewhat difficult, try the eye-hand coordination exercise.Pointing is easier when you orient the tablet square to the computer monitor so the screen cursor follows the same direction as your hand movements on the tablet.
Contents IndexContents 29Index29You can set the pen to position the screen cursor two different ways (see setting the tablet mapping).•In PEN MODE, wherever you place the pen on the tablet, the screen cursor will jump to a corresponding point on the display screen. The screen pointer indicates pen position, and follows the movement of the pen across the tablet surface. This is the default setting for the pen.•In MOUSE MODE you move the cursor with a “pick up and slide” motion similar to using a mouse.7 mm (0.28 inch) proximity16 mm (0.63 inch) proximity rangeWhen positioning the screen cursor and operating a pen button, the pen tip needs to be within 7 mm (0.28 inch) of the tablet surface. The pen tip does not need to touch the tablet in order to move the screen cursor or use a pen button.
Contents IndexContents 30Index30CLICKINGClick to highlight or select an item on the screen. Double-click to open it.DRAGGINGDragging is used to select and move objects on the monitor screen. Tip: You can configure Windows to select when the pen is over an icon and to launch the icon with a single click. To turn on this feature, first open a folder.• For Windows Vista, from the ORGANIZE pull-down menu choose FOLDER AND SEARCH OPTIONS.... From the GENERAL tab select SINGLE-CLICK TO OPEN AN ITEM (POINT TO SELECT).• For other Windows versions, from the TOOLS pull-down menu choose FOLDER OPTIONS.... From the GENERAL tab select SINGLE-CLICK TO OPEN AN ITEM (POINT TO SELECT).Clicking. Tap the pen tip once on the tablet, or press the pen tip on the tablet with enough force to register a click. (If CLICK SOUND is selected in the Bamboo control panel and your computer speakers are on, then you will hear a “click” sound when the pen tip is pressed hard enough to generate a button click. Adjust your speaker volume as necessary.) Try clicking on a folder icon by moving the screen cursor over the icon and pressing down on the pen tip. The folder should highlight when you press.Double-clicking. Quickly tap the tablet twice in the same place with the pen tip. This is like clicking twice with a mouse button. Try double-clicking on a folder icon to open it.Tip: Set a pen button to DOUBLE CLICK. This is easier than tapping twice with the pen tip, and is the preferred method of double-clicking with a pen.First point to an object. Then press the pen tip to the tablet and slide it across the tablet surface. The selected object will move across the display screen.To select text within a document, move the screen cursor to the beginning of a text line, then drag the pen across the tablet to highlight the text.
Contents IndexContents 31Index31USING THE PEN BUTTONSThe pen is equipped with two buttons. Each button has a programmable function that is selected when you press the button. You can use a pen button whenever the pen tip is within 7 mm (0.28 inch) of the tablet active area. You do not have to touch the pen tip to the tablet in order to use a button.To assign new button functions, see setting the pen button functions.The default button positions are:Tip: Set a pen button to DOUBLE CLICK. This is easier than tapping twice with the pen tip.Upper: RIGHT CLICKLower: PAN/SCROLLPAN/SCROLL lets you position a document or image in any direction within the active window simply by pressing the pen button and moving the pen tip across the tablet’s active area. As you move the pen tip, the document or image is repositioned to follow the direction of pen movement on the tablet. Release the pen button or lift the pen tip from the tablet surface when you are done.In some application windows the document will precisely follow the screen cursor as you move the pen tip, while in others it will simply move in the same general direction as the screen cursor.Use RIGHT CLICK to bring up application-specific or icon-specific menus.
Contents IndexContents 32Index32WRITING AND DRAWING WITH PRESSURE SENSITIVITYThe pen responds to your hand movements, enabling you to create natural-looking pen and brush strokes. The digital ink tools in Microsoft Windows Vista and Office 2007, as well as the drawing tools in many graphics applications, respond to the pressure you place on the pen. For example, sliders are used in some applications to vary line characteristics (width, color, and opacity). These characteristics can be controlled much better by the pen’s pressure sensitivity – you can vary line width, blend colors, and change opacity with the pressure you exert upon the pen.To write, ink, or draw with pressure sensitivity, move the pen along the surface of the tablet while applying various amounts of pressure downward on the tip of the pen. Press hard for thick lines or dense color. Press gently for thin lines or softer color. Note that some applications require you first select a pressure-sensitive tool from the application’s tool palette. To adjust the tip feel, see setting the tip and eraser feel, and double-click distance.Visit our web site for a list of applications that support pressure. See product information.
Contents IndexContents 33Index33ERASING The pen eraser (when equipped) works like the eraser on a pencil.Visit our web site for a list of graphics applications that support the eraser (see product information). If the eraser is not supported in an application, you can still use the eraser for positioning, drawing, or annotation.Use the pen eraser in Microsoft Windows Vista and Office 2007 to erase notes or sketches made with digital ink, and to select and delete text or spreadsheet cells within an application.You can erase intuitively and naturally in graphics applications that support the pen eraser. When you use the pen eraser, the application will automatically switch to the eraser tool.In applications that support pressure sensitivity, you can select pressure-sensitive tools in an application’s tool palette to vary the width and depth of your erasures as you change the amount of pressure you exert upon the pen.See setting the tip and eraser feel, and double-click distance for more information.
Contents IndexContents 34Index34EYE-HAND COORDINATION EXERCISEThis exercise is designed to retrain your eye-hand coordination for using the pen:1. Open any graphics application. Use the line tool to draw a rectangular grid with line spacings of about 20-25 mm (3/4 to 1 inch). You can use your traditional mouse to do this.2. Choose a free-hand tool in your application and use the pen to draw a dot at each grid intersection.3. Draw an X at each grid intersection.4. Clear your screen and make a simple drawing of your own. The more you use your pen, the easier writing, drawing, and navigation will become.CUSTOMIZING PEN INPUTCustomizing your pen is easy. Use the pen to open the Bamboo control panel. Then select the PEN tab to choose from the available options.Opening the control panelControl panel overviewCustomize your pen experience
Contents IndexContents 35Index35CUSTOMIZING YOUR BAMBOOUse the Bamboo control panel to customize Bamboo for the way you like work.Opening the control panelControl panel overviewCustomize your touch experienceCustomize your pen experienceButton functionsOPENING THE CONTROL PANELTo open the control panel:•Windows. Click on the Windows START button and choose ALL PROGRAMS. Then select BAMBOO and choose the BAMBOO PROPERTIES option.•Macintosh. Open SYSTEM PREFERENCES from either the Dock, the Apple menu, or from the APPLICATIONS folder. Then click on the BAMBOO icon.The control panel displays only those tabs and options that apply to your tablet model and configuration.Note: When more than one Wacom tablet is installed on a single computer, any changes made in the Bamboo control panel will be applied only to the tablet that was last used before opening the control panel.
Contents IndexContents 36Index36CONTROL PANEL OVERVIEWAfter opening the control panel, you can begin customizing Bamboo. Experiment with different settings to find what works best for you. Any changes you make will take effect immediately. Click DEFAULT to return a tab to the factory settings.Tool Tips are available for most control panel items. Position the screen cursor over an item and let it rest there; in a few moments the Tool Tip will pop up.Your keyboard tab and arrow keys can also be used to navigate the control panel.The following sections provide detailed information about each control panel tab and some of the more advanced concepts. Many of the sections also contain useful customizing tips.Customize your touch experienceCustomize your pen experienceButton functionsCustomizable settings are found on each tab.The tabs that apply to your tablet model and configuration are displayed when you open the control panel.Displays information about the control panel and driver. Displays this manual.Resets the selected tab to its default settings. Closes the control panel.
Contents IndexContents 37Index37CUSTOMIZE YOUR TOUCH EXPERIENCEThe control panel touch options enable you to customize Bamboo for the way you like to interact with your tablet and computer when using touch input.Setting the touch speedSetting the touch functionsSetting tablet and ExpressKey functionsDisabling touchSETTING THE TOUCH SPEEDSelect the TOUCH SPEED tab. The touch speed options determine how fast you must move or tap your fingers in order for an action or gesture to be recognized.Adjusts the screen pointer for speed of tracking and navigating. Choose a SLOW speed if you like to move the screen cursor at a slower rate using more finger motion. Choose a FAST speed to move the screen cursor quickly with less motion.POINTER ACCELERATION sets the acceleration level of the screen pointer. Choose a LOW setting for a slower response to your finger motion on the tablet. Choose a HIGH setting for a quicker response.The DOUBLE-TAP TIME adjusts how fast you must tap to register a double-click. To test your setting, position the screen cursor over the TEST area and tap twice.Sets the scrolling speed of the SCROLL touch gesture.See also navigating with touch.Note: Touch speed and acceleration settings are independent of system settings. Changes you make to these settings in the Bamboo control panel do not affect similar system settings. However, changes made to similar system settings may affect your Bamboo tablet settings.
Contents IndexContents 38Index38SETTING THE TOUCH FUNCTIONSSelect the TOUCH FUNCTIONS tab.Touch input options can be enabled or disabled and are dependent upon application support.Change the settings to customize how touch input works. Touch actions and gestures are available when selected.So that you may work in different ways, some functions (such as a right-click) can be performed using different actions or gestures.See also navigating with touch.Position the screen cursor over an option to see an animated demonstration of that function.If you do not choose a specific option to view, then the control panel animation will demonstrate each option sequentially, from top to bottom.
Contents IndexContents 39Index39SETTING TABLET AND EXPRESSKEY FUNCTIONSChoose the TABLET tab to set the tablet orientation and to customize the ExpressKeys. Tablet orientation Change how your tablet is oriented by selecting RIGHT HANDED or LEFT HANDED input. The tablet driver automatically configures all aspects of the tablet for the selected option. Next, physically rotate the tablet to match your selection.Note: At the log-in and user switching screens, the tablet orientation will use the default orientation that was selected when the driver was installed. If you want to change the default orientation, you must reinstall the driver using the Bamboo Installation CD. See configuring the tablet orientation.ExpressKey functions Use the pull-down menus to choose a function that will be performed when the key is pressed. Your choice will be displayed either within the pull-down menu or beneath the menu.• By default the upper key is set to TOUCH TOGGLE, allowing you to temporarily disable touch input when you press the ExpressKey. Press the ExpressKey again to re-enable touch input. (For Bamboo Touch, the default setting enables you to move FORWARD within Internet browsers.)• You can use the 2nd from top key to move BACK within Internet browsers.• The lower button default conditions are CLICK (bottom key) and RIGHT CLICK (2nd key up).Note: Pen-only tablet models do not include ExpressKeys.
Contents IndexContents 40Index40DISABLING TOUCHChoose the TABLET tab to disable and enable touch input.Available for tablet models configured for pen and touch input.• Select to DISABLE ALL TOUCH INPUT and work with the ExpressKeys and pen only.• Deselect to activate touch input.• This option can also be changed by pressing an ExpressKey to which the TOUCH TOGGLE function has been assigned.Note: When you disable touch, the TOUCH SPEED and TOUCH FUNCTIONS tabs will no longer be visible in the control panel. Re-enable touch to again access these tabs.
Contents IndexContents 41Index41CUSTOMIZE YOUR PEN EXPERIENCECustomizing your pen is easy. Use the pen to open the Bamboo control panel. You can then customize Bamboo for the way you like to interact with your tablet and computer when using pen input.Setting the pen button functionsSetting tip feel and double-click Setting eraser feelSetting the tablet mappingCustomizing the Pop-up Menu
Contents IndexContents 42Index42SETTING THE TIP AND ERASER FEEL, AND DOUBLE-CLICK DISTANCESelect the PEN tab. To create broad brush strokes or to click with a light touch, use a soft tip setting. For maximum control while drawing thin lines, use a firm tip setting. To erase with a broad stroke or to click with a light touch, use a soft eraser setting. For maximum control while erasing, use a firm eraser setting. When checked, an audible “click” sound will be heard whenever a pen click occurs and your computer speakers are turned on.Adjusts the size of the double-click area and the double-click speed. A larger setting makes double-clicking easier.Customizes the amount of pressure needed to click, draw, or ink. Drag the slider to a softer or firmer setting.Tips: Use a soft TIP FEEL to reach the full pressure range with a lighter touch. In some applications, a soft pressure setting can make the pen overreact – any small press on the pen is magnified on the screen. If you experience this, try a firmer TIP FEEL setting.To make double-clicking easier, expand the tap area that accepts a double-click (the double-click distance).Note: A large double-click distance may cause a delay at the beginning of brush strokes in some drawing applications. This may also cause a delay at the beginning of a drag action or inking stroke. If you notice such effects, try setting a smaller double-click distance and using a pen button set to double-click (see using the pen buttons).Customizes the amount of pressure needed to erase. Drag the slider to a softer or firmer setting.
Contents IndexContents 43Index43SETTING THE PEN BUTTON FUNCTIONSSelect the PEN tab to change the functions assigned to the buttons on your pen. Each pen button can be set to simulate a variety of mouse functions. Select the function to perform when pressing the upper or lower pen button.When you bring the pen tip within 7 mm (0.28 inch) of the tablet surface without touching the tablet and press the upper or lower pen button, the selected function occurs.Tip: To make double-clicking easier, set a pen button to double-click automatically by selecting DOUBLE CLICK.•HOVER CLICK to perform click functions without touching the pen tip to the tablet surface.•CLICK & TAP to enable the precise placement of click functions. When selected, you must first press the pen button and then touch the pen tip to the tablet surface in order to perform the click function. This is the default setting for Tablet PCs.Hover click Click tapYou can change the SIDE SWITCH MODE to best fit the way you like to use the pen when making right-clicks or other click functions. Click on the ADVANCED button to access the SIDE SWITCH MODE settings.
Contents IndexContents 44Index44SETTING THE TABLET MAPPINGSelect the PEN tab to set the tablet mapping. The tablet TRACKING options enable you to define the relationship between pen movement on the tablet surface and cursor movement on the monitor screen.By default the entire active area of the tablet maps to the entire monitor. If more than one monitor is in use the tablet will map to all monitors. See working with multiple monitors. TRACKING options control how the screen cursor moves:•Select PEN MODE to set the cursor so that its movement corresponds with the position of your pen on the tablet – wherever you place your pen on the tablet, the cursor will jump to a corresponding point on the screen. This is known as absolute positioning, and is the default setting for the pen. Click DETAILS... to customize the tablet mapping.•Select MOUSE MODE to move the screen cursor with a “pick up and slide” motion similar to using a traditional mouse. Click DETAILS... for setting the pen speed in mouse mode.Note: If you frequently switch between PEN MODE and MOUSE MODE, you can assign the MODE TOGGLE... function to one of your pen buttons or ExpressKeys.
Contents IndexContents 45Index45When you click on the PEN MODE DETAILS... button, the PEN MODE DETAILS dialog box is displayed. Use the SCREEN AREA options to select a screen area for tablet to screen mapping.•ALL SCREENS. The entire monitor(s) area is mapped; this is the default setting. See working with multiple monitors for more information.•MONITOR. The entire area of a single monitor that you choose is mapped.•PORTION. A portion of the desktop area is mapped. Click SET... to open a dialog box where you can set the portion of screen area.Returns settings to their factory defaults.Use the TABLET AREA options to select a tablet area for tablet to screen mapping.•FULL. The entire active area of the tablet is mapped. This is the default setting.•PORTION. A portion of the tablet area is mapped. Click SET... to open a dialog box where you can set the portion of tablet area.Note: Although Bamboo is optimized for use with 16 : 10 aspect ratio displays, the default settings automatically adjust for use with other aspect ratio displays.When FORCE PROPORTIONS is unchecked, the correct scale or proportions are not maintained. The selected tablet area is mapped to the selected display area. Drawing a circle on the tablet may create an ellipse on the display screen. This is the default setting.When FORCE PROPORTIONS is checked, the correct vertical and horizontal proportions are maintained. Drawing a circle on the tablet results in a circle on the display screen. Depending on your settings, some portions of the tablet active area may no longer be usable when this option is selected.
Contents IndexContents 46Index46PORTION OF SCREEN AREAThe tracking options in the PEN MODE DETAILS dialog box allow you to define which portion of the display screen your tablet will map to:ALL SCREENS Maps the entire monitor(s) area. This is the default setting. See working with multiple monitors.MONITOR Maps the entire area of a single monitor that you choose.PORTION Allows you to select a portion of the display for tablet to screen mapping. Click SET... to open the PORTION OF SCREEN dialog box.Choose a method for defining a portion of the display:• Drag corners of the foreground graphic to select the screen area.• Select the CLICK TO DEFINE SCREEN AREA button and move the screen cursor to select the screen area. Be sure to follow any MESSAGE prompts.After defining a portion of the screen, you may need to use a different input device to access other portions of the screen area.
Contents IndexContents 47Index47PORTION OF TABLET AREAThe tracking options in the PEN MODE DETAILS dialog box allow you to define the tablet area that will be mapped to the screen area:FULL The entire active area of the tablet is mapped. This is the default setting.PORTION Allows you to select a portion of the tablet active area for tablet to screen mapping. Click SET... to open the PORTION OF TABLET dialog box.Choose a method for defining a portion of the tablet:• Drag corners of the foreground graphic to select the tablet area that will be mapped to your selected screen area.• Select the CLICK TO DEFINE TABLET AREA button and use your pen on the tablet to select the tablet area. Be sure to follow any MESSAGE prompts.
Contents IndexContents 48Index48SETTING THE PEN SPEED IN MOUSE MODETo change the screen cursor acceleration and speed when using the pen in MOUSE MODE, click on the MOUSE MODE DETAILS... button (located on the PEN tab). A dialog box will be displayed where you can make your adjustments.Sets the screen cursor acceleration when in MOUSE MODE.Sets the screen cursor tracking speed when in MOUSE MODE.Returns settings to their factory defaults.Notes: The dialog box will also appear when you set a button to MODE TOGGLE.... Note that only one ACCELERATION and SPEED setting can be made.The mouse mode acceleration and speed settings are independent of system settings. Changes you make to these settings in the Bamboo control panel do not affect similar system settings. However, changes made to similar system settings may affect your Bamboo tablet settings.
Contents IndexContents 49Index49CUSTOMIZING THE POP-UP MENUThe Pop-up Menu is available for tablet models that are configured for both pen and touch input. Select the POP-UP MENU tab to create the custom menu and define the available functions that will appear in the menu.To display the Pop-up Menu, set a pen button to the POP-UP MENU function. Whenever you press that button, the Pop-up Menu is displayed at the screen cursor position. Choose from available options in the menu by clicking on them. To close the Pop-up Menu without making a selection, click outside of the menu.Displays a list of functions that have been added to the Pop-up Menu. To change the order of an item, drag it to a new location. Double-click on an item to make edits.Select a button function to add to the Pop-up Menu list.Removes the selected item from the list.Sets the FONT and FONT SIZE of the Pop-up Menu.Returns the tab settings to the default values.Important: This action will delete all Pop-up Menu items that have been defined.
Contents IndexContents 50Index50BUTTON FUNCTIONS FUNCTION DESCRIPTIONCLICKS•CLICK Simulates a primary mouse button click. Default setting for the pen tip.•RIGHT CLICK Simulates a right mouse button click, which displays a context menu.•MIDDLE CLICK Simulates a middle mouse button click.•DOUBLE CLICK Simulates a double-click. For easier double-clicking, use this function instead of tapping twice with the pen tip.•CLICK LOCK Simulates holding down the primary mouse button. Press the tool button once to initiate click lock. Press the button again to release click lock. Click lock is useful for dragging objects or selecting blocks of text.•4TH CLICK Simulates a 4th mouse button click.•5TH CLICK Simulates a 5th mouse button click.BACK Simulates the BACK command in browser applications.FORWARD Simulates the FORWARD command in browser applications.ERASE Pen only. Sets a button so that when the button is pressed, the pen tip will act like the eraser in applications that support the ERASE function. See erasing for information on using the eraser.The following options are available for ExpressKey and pen button settings. Not all options are available for all controls.
Contents IndexContents 51Index51FUNCTION DESCRIPTIONKEYSTROKE... Enables you to simulate keystrokes. Select this option to display the DEFINE KEYSTROKE dialog box.Enter a keystroke or keystroke combination in the KEYS entry box. Keystroke combinations can include letters, numbers, function keys (such as F3) and modifier keys (such as SHIFT, ALT, or CTRL for Windows, or SHIFT, OPTION, COMMAND, and CONTROL for Macintosh).You can also select special keystrokes or keystroke combinations from the ADD SPECIAL pull-down menu.After defining a keystroke sequence, click OK.Important: Because the ENTER (Windows) and RETURN (Macintosh) keys can be selected as a defined keystroke, they cannot be used to select OK. You must use your pen to click on the OK button.If prompted, enter a name for the keystroke definition. The name will be displayed with the respective control or in the Pop-up Menu list, as applicable.To learn which keystroke shortcuts are supported by a particular application, see the documentation that came with the application.MODIFIER... Enables you to simulate modifier key(s) (such as SHIFT, ALT, or CTRL for Windows, or SHIFT, OPTION, COMMAND, and CONTROL for Macintosh). Many applications use modifier keys to constrain the size or placement of objects. Clears the keystroke entry box.Deletes only the last entry in the keystroke entry box.Choose one or more modifier key options. Select the CLICK box if you want a mouse click to occur whenever you press the tool button.
Contents IndexContents 52Index52FUNCTION DESCRIPTIONPOP-UP MENU Displays a Pop-up Menu on your screen. See customizing the Pop-up Menu for more information.PAN/SCROLL Pen only. Enables you to position a document or image in any direction within the active pane by pressing a pen button set for PAN/SCROLL and then dragging with the pen tip across the tablet’s active area.SHOW DESKTOP Minimizes all open windows to display a clean desktop.SWITCH APPLICATIONS Brings up the application switching dialog with focus on the next open application. On Windows Vista systems running Aero, Flip 3D will be activated with focus on the next open application.OPEN/RUN... Opens a dialog box where you can select a specific application, file, or script to launch. When you select PAN/SCROLL, the PEN SCROLL SPEED dialog box prompts you to set a scrolling speed that will be used in applications that do not support grabber hand (pixel-level) panning within a document or image.A slower setting reduces the scroll rate and is useful for close-up and detail work where you need precise control of the image.As you move the pen tip, the document or image is repositioned to follow the direction of pen movement on the tablet.Release the button or lift the pen tip from the tablet surface when you are done.Click BROWSE... to locate an application, file, or script to launch. The selection you make appears in the APPLICATION TO RUN box. Click OK to accept the selection.The dialog box will close and the OPEN/RUN... option you have selected will be assigned as your tool button option. Simply press the tool button to launch the assigned option.If your selection is for the Pop-up Menu, it will be displayed in the Pop-up Menu list.
Contents IndexContents 53Index53FUNCTION DESCRIPTIONTOUCH TOGGLE Available for Bamboo and Bamboo Fun. TOUCH TOGGLE is useful when you are working with the pen and want to prevent accidental touch input (e.g., to prevent an accidental right-click). Temporarily disable touch by pressing an ExpressKey to which you have assigned the TOUCH TOGGLE function. Press the ExpressKey again to re-enable touch input. See also setting tablet and ExpressKey functions.INK TOGGLE (Macintosh.) Toggles the INK ANYWHERE function of Inkwell on and off. Inkwell automatically recognizes and converts your handwriting into text and inserts it into a document. Note that Ink must be turned on for this function to work. See your Macintosh help for information on working with Inkwell.TABLET PC•TABLET PC INPUT PANEL (Tablet PCs and Windows Vista systems that support the Tablet PC Input Panel.) Opens the Tablet PC Input Panel when you press a tool button set to this function.•JOURNAL (Windows Vista and Tablet PC systems that include Microsoft Journal.) Opens Microsoft Journal.EXPOSÉ (Macintosh.) Tiles all open windows.PRESSURE HOLD Locks the pressure at the current pressure level until the button is released. For example, you can paint with pressure sensitivity until you reach the brush size that you like. You can then press the button and continue painting with the same size brush until the button is released.MODE TOGGLE... Toggles pen input between PEN MODE and MOUSE MODE. See setting the pen speed in mouse mode for details.DISABLED Disables the button function.DEFAULT Returns a button to its default setting.
Contents IndexContents 54Index54PROBLEMS WITH YOUR BAMBOO? Most of the time your tablet will work flawlessly. But if you are having trouble, Wacom recommends you do the following:1. If the tablet driver failed to load properly, first perform the recommended action in any error message that may appear on your screen. If that does not solve the problem, review the troubleshooting procedures in this chapter.2. Look in the troubleshooting tables. Your problem may be described there and you can try the solution offered.3. Open the tablet Read Me file and look for any information updates.4. Test your tablet and pen (if equipped). See testing your tablet.5. If you are having a compatibility conflict between Bamboo and a new hardware or software product, see obtaining driver downloads for information on downloading an updated software driver. Wacom periodically updates the software driver to maintain compatibility with new products.6. Check the FAQs (Frequently Asked Questions) on the Wacom web site for your region.7. If you have tried the suggestions in this manual and still cannot resolve the problem, then contact Wacom for technical support. See technical support options and the Read Me file for information on where to obtain support for your region.Testing your tabletTesting a penTroubleshooting tablesTechnical support optionsObtaining driver downloads
Contents IndexContents 55Index55TESTING YOUR TABLET1. Turn on your computer and wait until the system has fully loaded.2. Check the connection. The tablet status LED should glow whenever the tablet is properly connected and your computer has registered it as a USB device. If not:• Make sure the tablet USB cable is securely connected to an active USB port on your computer.• Check the tablet USB cable for damage.• If you are connecting the tablet to a USB hub (or hub device such as a keyboard with USB ports), be sure the USB hub is properly connected to your computer and is active.• If the status LED does not illuminate after your computer is on and has finished booting up, your USB port may be disabled. Verify that you have connected the tablet to an active USB port.• Connect the tablet to a different USB port or try connecting to the USB port on another computer.3. Check touch and pen input: • Check touch input. Attempt to move the screen cursor by tracking your finger across the tablet surface. Then tap to select an item. The status LED should brighten when you touch the active area of the tablet.If the tablet driver does not load properly, basic touch movement will be recognized but other actions and gestures will not. If the driver does not properly load, the lower two ExpressKeys only will function at their default settings of CLICK (bottom key) and RIGHT CLICK (2nd key up). If gestures are not recognized and ExpressKeys do not function, insert the Bamboo Installation CD into your computer and install the driver software for the tablet.• Check pen input. If your tablet is equipped with a pen and the tablet driver does not load properly, pen input will not be available. (If you have a pen-only tablet model, you will be able to use the pen tip to move the screen cursor and click. You will also be able to use the pen buttons to CLICK (lower button) and RIGHT CLICK (upper button), but there will be no other pen functionality.) Insert the Bamboo Installation CD into your computer and install the driver software for the tablet. See also testing a pen.4. Check the ExpressKeys (if equipped). Do a quick check by pressing each key in turn. The status LED should brighten each time you press a key when there is no touch or pen input. Then open the Bamboo control panel and select the TABLET tab. Click on the DEFAULT button to return to the tablet default settings.• Press the upper ExpressKey to toggle touch input off and on. (For Bamboo Touch: Open your Internet browser and click on a couple of links. Next click on the appropriate browser button to move backwards. Then press the upper ExpressKey to move forward within the browser.)• Open your Internet browser and click on a couple of links. Press the second from top key to move back within the browser.• Position the screen cursor over an item, such as an empty folder on your desktop, and press the bottom ExpressKey to perform a click.• Position the screen cursor over an item, such as an empty folder on your desktop, and press the second up from bottom ExpressKey to perform a right-click.5. If any of these tests fail you may have defective hardware. See technical support options.6. After testing, use the Bamboo control panel to reconfigure your tablet for any custom settings you may originally have been using.
Contents IndexContents 56Index56TESTING A PEN1. First perform the procedures for testing your tablet.2. Check the pen by opening the Bamboo control panel and selecting the PEN tab. Click on the DEFAULT button to return the pen to its default settings. Next:• Touch the pen tip and then the eraser (when equipped) to the tablet active area. The status LED should brighten each time the tip or eraser makes contact with the tablet surface.• Without applying pressure to the pen tip, hold the pen tip within approximately 7 mm (0.28 inch) of the tablet surface and press each pen button in turn. The status LED should brighten each time a pen button is pressed.• While still within proximity, but without touching the tablet surface, move your pen across the active area of the tablet. The screen cursor should move in the corresponding direction on your monitor or display screen.3. If any of these tests fail you may have defective hardware. See technical support options.4. After testing, use the Bamboo control panel to reconfigure your tablet and pen for any custom settings you may originally have been using.
Contents IndexContents 57Index57TROUBLESHOOTING TABLESIf you encounter problems with your Bamboo tablet or pen (when equipped), refer to the following tables. Your problem may be described here, and you can try the solution offered. Be sure to check the Read Me file for the latest information updates.For additional information, visit Wacom’s web site at http://www.wacom.com/productsupport.General problemsTouch input problemsPen input problemsWindows-specific problemsMac-specific problemsGENERAL PROBLEMSThe computer does not have an available USB port. Check if there is an available USB port on a USB hub device. If not available you will need to add a USB hub or USB card.The tablet status LED does not illuminate. Verify that your tablet’s USB cable is properly connected to an active USB port. If you are connecting to a USB hub device, make sure the hub is connected to an active USB port and that the hub is active.The computer does not go to sleep when using a tablet configured for pen input.When you are not using the pen, remove it from the tablet surface or the tablet will continue to send data, keeping the computer awake.Note: Because some metallic or other conducting objects can also cause the tablet to send data, it is best to keep the tablet surface clear of all objects when not in use.The screen cursor is very erratic or jumps around when using the tablet.On rare occasions the tablet may receive interfering radio frequencies from a computer monitor or nearby AM radio station. If you notice interference from a monitor, try moving the tablet at least six (6) inches away from the monitor, or change the monitor refresh rate or monitor resolution.The tablet is set for RIGHT HANDED (or LEFT HANDED), but at the log-in screen the tablet seems to work upside down.Reinstall the tablet driver from the Bamboo Installation CD and change the default orientation of the tablet. See configuring the tablet orientation for details.
Contents IndexContents 58Index58TOUCH INPUT PROBLEMSTouch input does not work. Re-enable touch input by pressing an ExpressKey that is set to TOUCH TOGGLE. Otherwise, open the Bamboo control panel and go to the TABLET tab. Be sure the DISABLE ALL TOUCH INPUT option is deselected.Touch input does not seem to fully work. The screen cursor can be moved, but more complex actions or gestures do not work.If the tablet driver does not load properly, basic touch movement will be recognized but other actions and gestures will not. If the driver does not properly load, the lower two ExpressKeys only will function at their default settings of CLICK (bottom key) and RIGHT CLICK (2nd key up). Insert the Bamboo Installation CD into your computer and install the driver software for the tablet.The tablet does not reliably recognize two fingers. If you hold your fingers too close together, the tablet may not recognize them as being separate. Try moving your fingers a little further apart.Cannot zoom-in or zoom-out when working with Adobe Photoshop.If zoom functions do not operate correctly within Photoshop, verify that the ZOOM WITH SCROLL WHEEL function is selected within the Photoshop PREFERENCES options.Scrolling and panning gestures do not function correctly when working with Adobe Photoshop.If touch input gestures do not operate correctly within Photoshop, verify that the ZOOM WITH SCROLL WHEEL function is selected within the Photoshop PREFERENCES options.Rotation gestures do not seem to work consistently, or not at all.Rotation may work differently depending on the application you are working with. For example, rotation may work smoothly, in 90-degree increments, or not at all.For best recognition of this gesture, start with your fingers positioned diagonally on the tablet surface and keep them at least 25 mm (1 inch) apart.The TOUCH SPEED and TOUCH FUNCTIONS tabs are not visible in the control panel.Go to the TABLET tab and uncheck the DISABLE ALL TOUCH INPUT option. If you have assigned TOUCH TOGGLE to an ExpressKey, you can press the ExpressKey to toggle the tabs back on.
Contents IndexContents 59Index59PEN INPUT PROBLEMSThe pen does not position the screen cursor, or otherwise work.If the tablet driver does not load properly, pen input will not be available. • For tablet models that combine pen and touch input, basic touch movement will continue to be recognized but other actions and gestures will not. If the driver does not properly load, the lower two ExpressKeys only will function at their default settings of CLICK (bottom key) and RIGHT CLICK (2nd key up).• If you have a pen-only tablet model, you will be able to use the pen tip to move the screen cursor and click. You will also be able to use the pen buttons to CLICK (lower button) and RIGHT CLICK (upper button), but there will be no other pen functionality.Insert the Bamboo Installation CD into your computer and install the driver software for the tablet.The pen does not draw or ink with pressure sensitivity. Some applications require that you turn on the pressure capabilities within the application or the selected tool before the pen will respond as a pressure-sensitive tool.Clicking is difficult. Open the Bamboo control panel and go to the PEN tab. Try using a lighter TIP FEEL.Select the CLICK SOUND option (the check box should be checked). This will enable you to hear when the pen registers a mouse click. Your computer speakers must be turned on and the volume audible before you can hear CLICK SOUND.Double-clicking is difficult. Be sure you are quickly tapping the tablet twice in the same place on the tablet active area.Using a pen button set to double-click is recommended (review the techniques in clicking).Open the Bamboo control panel and go to the PEN tab.• Try increasing the DOUBLE CLICK DISTANCE.• Try using a lighter TIP FEEL.For Windows, try setting your system to launch programs with a single click. See clicking.The pen selects everything, will not stop selecting. Open the Bamboo control panel and go to the PEN tab. Move the TIP FEEL slider toward FIRM. If this does not help, see testing a pen.The eraser (when equipped) selects everything or will not stop erasing.Open the Bamboo control panel and go to the PEN tab. Move the ERASER FEEL slider toward FIRM. If this does not help, see testing a pen.You notice a screen delay at the beginning of pen or inking strokes.Open the Bamboo control panel and go to the PEN tab. Try decreasing the DOUBLE CLICK DISTANCE.
Contents IndexContents 60Index60WINDOWS-SPECIFIC PROBLEMSYou have to press hard with the pen when clicking, drawing, or writing.Open the Bamboo control panel and go to the PEN tab. Move the TIP FEEL slider toward SOFT.The pen tip does not function. Be sure you are using the pen that originally came with your tablet. Other pens may not function properly on the Bamboo tablet.See testing a pen to verify pen operation. If any of the tests fail you may have defective hardware.The screen cursor jumps back. Do not place the pen on the tablet when it is not in use or when you are using another pointing device. Leaving your pen on the tablet may interfere with screen cursor positioning when using other input devices.The upper or lower pen button does not work. Be sure you press the pen button when the pen tip is within 7 mm (0.28 inch) of the tablet active area – do this without pressing down on the pen tip.In the Bamboo control panel, click on the PEN tab ADVANCED button. If CLICK & TAP is selected, you will need to first press the pen button and then touch the pen tip to the tablet surface in order to perform a click function. See setting the pen button functions.From the Bamboo control panel, verify that the pen button is set to the function you are expecting to occur.See testing a pen to verify pen operation. If any of the tests fail you may have defective hardware.Cannot move the cursor where you want to on the screen, or the line you are drawing does not line up with the location of the pointer in paint applications.Open the Bamboo control panel. Verify that PEN MODE is selected. If this does not help, click on the DEFAULT button to reestablish the default tablet to screen mapping. If you are still having difficulty, remove the tablet preferences (see Windows-specific problems or Mac-specific problems for details).You suspect the tablet preferences may be corrupted, or want to make certain that all settings are at their factory defaults.Delete the tablet preferences as follows:First close any open applications. Then click the START icon and select ALL PROGRAMS. Select BAMBOO and BAMBOO PREFERENCE FILE UTILITY. In the dialog box that appears, click on the REMOVE My Preferences button to delete the preferences for the current user.To delete preferences for multiple users on Windows Vista or XP systems, click the REMOVE button under All User Preferences. Note that administrator rights are required to delete preferences for all users. Relaunch any currently open tablet-aware applications that you may be running.If you had previously backed up your preference file, you can quickly restore the tablet preferences by clicking on the RESTORE... button under My Preferences.
Contents IndexContents 61Index61MAC-SPECIFIC PROBLEMSAt startup, a dialog box appears telling you that either the driver failed to load or the tablet preferences have not yet been created.The tablet was not detected at startup. Make sure the USB interface cable is securely connected to an active USB port on your computer. Make sure also that the tablet status LED is illuminated. If your tablet is plugged into a USB hub, make sure the hub is connected and active.From the GO menu, select the UTILITIES folder and launch the SYSTEM PROFILER. Select USB from the HARDWARE section of the CONTENTS list. A Wacom USB tablet model should be listed. If a tablet model is not listed, check the USB tablet cable connection or try plugging the tablet into a different USB port.If this does not help, contact Wacom for technical support. See technical support options.You suspect the tablet preferences may be corrupted, or want to make certain that all settings are at their factory defaults.Delete the tablet preferences. First open the main APPLICATIONS folder. Then open the TABLET folder and run the REMOVE BAMBOO utility.•Single user. When the utility starts, select CURRENT USER and click on the REMOVE button. Log out, then log back in. When the tablet driver loads it will create a new preferences file with the factory defaults.•Multiple users. When the utility starts, select ALL USERS and click on the REMOVE button. Log out, then log back in. When the tablet driver loads it will create new preferences files with the factory defaults.If you had previously backed up your preference file, you can quickly restore the tablet preferences for the CURRENT USER or ALL USERS by clicking on the RESTORE... button within the utility.Note: Do not manually remove the BAMBOO.PREFPANE file from the main LIBRARY PREFERENCEPANES folder. This file is only to be removed when uninstalling the tablet software driver, and then only when using the REMOVE BAMBOO utility.
Contents IndexContents 62Index62Inkwell does not work correctly with the tablet. There may be a problem with the Inkwell preferences. Remove the damaged preference files as follows. They will be recreated when you enable handwriting recognition.1. From the Apple menu, choose SYSTEM PREFERENCES. From the System Preferences menu, choose SHOW ALL and select INK. Then turn off handwriting recognition.2. From the GO menu, choose your HOME. Open the LIBRARY and PREFERENCES folders. Then remove the following preferences:• com.apple.ink.framework.plist• com.apple.ink.inkpad.plist• com.apple.ink.inkpad.sketch3. Go back to SYSTEM PREFERENCES and INK, and then enable handwriting recognition.4. Test the Inkwell function using your tablet and pen.5. If this procedure does not resolve your problem with Inkwell, contact Apple Support for further assistance. Wacom is not the software manufacturer for Inkwell and we are limited in our abilities to support a third party software application.
Contents IndexContents 63Index63TECHNICAL SUPPORT OPTIONSIf you have a problem with your tablet, first check the tablet installation guide to be sure the unit is installed correctly. Then review the troubleshooting procedures.If you cannot find the answer in this manual, you may find updated information about your problem in the Read Me file for your platform (located on the Bamboo Installation CD). You can also check the product FAQs (Frequently Asked Questions) on the Wacom web site for your region.If you have an Internet connection you can download the latest software drivers from the Wacom web site for your region. See obtaining driver downloads.If you cannot solve the problem and you think your tablet is not working properly, contact the Wacom support staff for the area where your product was purchased. See the tablet Read Me file, located on the Bamboo Installation CD, for contact information.When you call, you should be at your computer with the following information available:• This manual.• Tablet serial and model number. (Look on the bottom of the tablet.)• Driver version number. (See the Bamboo Installation CD or the Bamboo control panel.)• The make and model of your computer, and operating system version number.• A list of peripheral devices attached to your computer.• The software application and version you were using when the problem occurred.• The exact wording of any error message that appeared on your screen.• What happened and what you were doing when the problem occurred.• How you tried to solve the problem.
Contents IndexContents 64Index64OBTAINING DRIVER DOWNLOADSWacom periodically updates the tablet software driver to maintain compatibility with new products. If you are having a compatibility problem between Bamboo and a new hardware or software product, it may be helpful to download a new Wacom tablet software driver (when available) from the Internet.USA, Canada, Central and South AmericaEurope, Middle East and AfricaJapanAsia Pacific (English)ChinaKoreaTaiwanWorldwide Web: http://www.wacom.com/productsupport Software updates.Worldwide Web: http://www.wacom.eu/downloads Software updates.Worldwide Web: http://tablet.wacom.co.jp/download/down1.html Software updates. (Japanese)Worldwide Web: http://www.wacom-asia.com Software updates. (English)Worldwide Web: http://www.wacom.com.cn Software updates. (Simplified Chinese)Worldwide Web: http://www.wacomkorea.com Software updates. (Korean)Worldwide Web: http://www.wacom.com.tw Software updates. (Traditional Chinese)
Contents IndexContents 65Index65APPENDIXThis section contains tips on caring for Bamboo, instructions on how to uninstall the tablet software, information about digital inking, your license and warranty, and more.Caring for BambooReplacing the pen nibUninstalling the softwarePen and digital ink capabilities in Windows VistaAbout the Windows Vista Tablet PC Input PanelProduct specificationsProduct informationOrdering parts and accessoriesRadio and television interferencePrecautionsLicense and Warranties (Worldwide, except for Europe, Africa and Middle East)Licence warranty conditions (Europe, Africa and Middle East)
Contents IndexContents 66Index66CARING FOR BAMBOOKeep your Bamboo tablet surface and pen (when equipped) clean. Dust and dirt particles can stick to the pen and cause excessive wear to the tablet surface. Regular cleaning with a soft, damp cloth will help to prolong the life of your tablet surface and pen; you can also dampen the cloth using a very mild soap diluted with water. Do not use volatile liquids, such as paint thinner or benzene, as they may damage the plastic case.Keep Bamboo in a clean, dry place and avoid extremes in temperature. Room temperature is best. Also, your Bamboo tablet and pen (when equipped) are not made to come apart. Twisting the pen case can break the pen. Taking apart the product will void your warranty.Important: Take care to never spill liquids onto the tablet or pen. Be especially careful of getting the tablet ExpressKeys or pen buttons, tip, and eraser (when equipped) wet – they contain sensitive electronic parts that will fail if liquid enters them.REPLACING THE PEN NIBThe pen nib (tip) will wear with normal use. Excessive pressure will cause it to wear sooner. Replace the nib when it gets too short – less than 1 mm (0.4 inch) – or develops a flat point.1. Clasp the old nib with the nib extractor, pair of tweezers, needle-nosed pliers, or similar instrument and pull it straight out of the pen.2. Slide the end of the new nib straight into the barrel of the pen. Firmly push the nib until it stops.Warning: Choking hazard. Prevent children from swallowing the pen nib or button part. The pen nib or button part may accidentally be pulled out if children are biting on them.To order replacement parts, see ordering parts and accessories.Important: When the pen is not in use, place it in the pen holder or lay it flat on your desk. The eraser end of the pen should be inserted first into the loop. To maintain the sensitivity of your pen, do not store the pen in a container where it will rest on the tip or eraser (when equipped).Nib 1 mm (0.4 inch) or less)
Contents IndexContents 67Index67UNINSTALLING THE SOFTWAREFollow the appropriate procedure below to remove the tablet driver software from your system.Important: When you remove the tablet software from your system, your tablet will no longer operate with full tablet functionality but will continue to function as a mouse device.Windows Vista: Click on the Windows START button and choose CONTROL PANEL. In the CONTROL PANEL window, click on UNINSTALL A PROGRAM. In the dialog box that appears, choose the BAMBOO option. Click UNINSTALL and follow the prompts to remove the tablet driver. (If prompted, enter your administrator login name and password.)Windows XP or XP x64: Click START. In the start menu, select CONTROL PANEL. Then select ADD OR REMOVE PROGRAMS. In the ADD OR REMOVE PROGRAMS window, choose BAMBOO and click on the REMOVE button. Follow the prompts to remove the tablet driver.Macintosh: From the GO menu, choose APPLICATIONS and open the BAMBOO folder. Double-click on the REMOVE BAMBOO icon and select the REMOVE TABLET SOFTWARE button. Enter your administrator login name and password. After the removal is completed, click OK.
Contents IndexContents 68Index68PEN AND DIGITAL INK CAPABILITIES IN WINDOWS VISTAMicrosoft Windows Vista provides extensive support for pen* input. When using Bamboo with a computer running Windows Vista, your experience is enhanced by powerful note taking, handwriting recognition, fast navigation, and other digital inking options designed to give you quick, intuitive results with the pen.•Note taking. Use the pen to jot notes and capture quick sketches in Microsoft Journal. Journal simulates a physical notebook, but with the advantages of digital note taking – you can choose from a variety of pen, marker, and highlighter tools, plus an eraser that is easily activated by the eraser (when equipped) of the pen. Journal also includes a powerful search engine that can even locate your handwritten content.• Handwriting recognition. Because Windows Vista includes powerful handwriting recognition capabilities, you can use the pen to quickly enter handwritten information anywhere the computer accepts typed input. You can convert your handwritten content to typed text at any time.•Gestures. Use your pen to make simple gestural movements on the tablet to trigger customizable actions for navigation, editing, and other functions. To customize your gestures, select the FLICKS tab in the PEN AND INPUT DEVICES control panel.• Digital Ink in Microsoft Office 2007. Use the pen to full advantage with the enhanced digital mark-up and inking tools available in Microsoft Office 2007 applications running on Windows Vista. Found on the REVIEW tab within applicable applications, these tools provide a consistent set of inking options. For quick access, you can add specific inking tools to the Quick Access Toolbar located at the top of each application.To make the most of the pen in Microsoft Windows Vista, be sure to study the documentation that came with your system, including the Windows Vista training tools and Tablet PC tutorial. You can access the Tablet PC Pen Training from the Vista START menu by choosing ALL PROGRAMS, TABLET PC, and TABLET PC PEN TRAINING.Note: The following workarounds in the Wacom tablet driver improve drawing performance in Vista:• The Vista Pen Flicks and ‘press-and-hold-to-right-click’ features are disabled in graphics applications using the Wintab API.• There is no pressure sensitivity in Journal and other Vista Ink features when both the Flicks and ‘press-and-hold-to-right-click’ features are disabled in the Vista PEN AND INPUT DEVICES control panel.* Pen features supported in all versions of Windows Vista except Vista Home Basic.
Contents IndexContents 69Index69ABOUT THE WINDOWS VISTA TABLET PC INPUT PANELThe Input Panel enables you to use handwriting or an on-screen keyboard to directly enter text. There are a number of ways to launch the Input Panel:• Click on the Input Panel icon which appears when you move the screen cursor into a text entry area.• Click on the Input Panel tab, located by default on the left edge of the display screen.• Click on the Tablet PC Input Panel icon located on the Windows taskbar. If the icon is not visible, right-click on the taskbar, select TOOLBARS, and TABLET PC INPUT PANEL.To customize the Input Panel:1. First open the Input Panel and then click on TOOLS in the menu bar.2. Select OPTIONS to open the Input Panel Options dialog box.3. Customize the Input Panel settings for the way you like to work.To learn more about using Bamboo in Microsoft Windows Vista and Office 2007, study the documentation that came with your system and Microsoft Office applications. Be sure to take advantage of the Windows Vista training tools, including the Tablet PC tutorial, available from Microsoft.You can visit also the Wacom web site at www.wacom.com/vista for more information on working with the pen in Windows Vista.
Contents IndexContents 70Index70PRODUCT SPECIFICATIONSGENERAL SPECIFICATIONSBAMBOO TOUCH TABLET (MODEL CTT-460)BAMBOO TABLET (MODEL CTH-460)Aspect ratio 16 : 10Coordinate resolution, pen 100 lpmm (2540 lpi)Touch input resolution 4 lpmm (101.6 lpi)Accuracy, pen +/- 0.25 mm (0.01 in)Accuracy, touch +/- 2.0 mm (0.08 in)Pen detection height 16 mm (0.63 in)Reading height with pen, average 7 mm (0.28 in)Report rate, pen 133 points per second, maximumReport rate, touch 50 points per second, maximumExpressKeys stroke 0.25 mm (0.01 in), approximately, when equippedCommunication interface USBConnector USB Type ACable length 1.5 m (4.9 ft)Power requirements DC 5V, 70 mA or less, from USB portOperating temperature 5 to 40 degrees C (41 to 104 degrees F)Storage temperature -15 to +55 degrees C (5 to 131 degrees F)Operating relative humidity 30% to 80% non-condensingStorage relative humidity 30% to 85% non-condensingCertifications and compliance FCC Class B, Industry Canada Class B, CE, VCCI Class B, BSMI, C-Tick, MIC, GOST-R, The European Union RoHS Directive 2002/95/EC, Chinese RoHSTouch active area (W x D) 125.0 x 85.0 mm (4.92 x 3.35 in)Physical size (W x D x H) 208.4 x 137.6 x 7.5 mm (8.21 x 5.42 x 0.30 in), approximately, excluding rubber feetWeight 210 g (0.46 lb), approximatelyTouch active area (W x D) 125.0 x 85.0 mm (4.92 x 3.35 in)Pen active area (W x D) 147.2 x 92.0 mm (5.80 x 3.62 in)Physical size (W x D x H) 248.2 x 176.1 x 8.5 mm (9.78 x 6.94 x 0.33 in), approximately, excluding pen holder and rubber feetWeight 360 g (0.79 lb), approximately
Contents IndexContents 71Index71PEN (MODEL LP-160E), FOR BAMBOOBAMBOO FUN SMALL TABLET (MODEL CTH-461)BAMBOO FUN MEDIUM TABLET (MODEL CTH-661)PEN (MODEL LP-161E), FOR BAMBOO FUNPen tip travel 1.0 mm (0.04 in) or lessPressure levels 1024 levelsEraser tip travel 1.0 mm (0.04 in) or lessPhysical size (L x D) 154.0 x 11.8 mm (6.06 x 0.46 in)Weight 15 g (0.53 oz), approximatelyPen tip type Polyacetal (Part No. PSI-A057-01), blackTouch active area (W x D) 125.0 x 85.0 mm (4.92 x 3.35 in)Pen active area (W x D) 147.2 x 92.0 mm (5.80 x 3.62 in)Physical size (W x D x H) 248.2 x 176.1 x 8.5 mm (9.78 x 6.94 x 0.33 in), approximately, excluding pen holder and rubber feetWeight 420 g (0.92 lb), approximately, including cableTouch active area (W x D) 190.0 x 130.0 mm (7.48 x 5.12 in)Pen active area (W x D) 216.48 x 137.0 mm (8.53 x 5.40 in)Physical size (W x D x H) 336.8 x 223.0 x 8.5 mm (13.27 x 8.79 x 0.33 in), approximately, excluding pen holder and rubber feetWeight 740 g (1.63 lb), approximately, including cablePen tip travel 1.0 mm (0.04 in)Pressure levels 1024 levelsEraser tip travel 1.0 mm (0.04 in) or lessPhysical size (L x D) 154.0 x 11.8 mm (6.06 x 0.46 in)Weight 15 g (0.53 oz), approximatelyPen tip type Polyacetal (Part No. PSI-A057), white
Contents IndexContents 72Index72BAMBOO PEN TABLET (MODEL CTL-460)PEN (MODEL LP-160), FOR BAMBOO PENPen active area (W x D) 147.2 x 92.0 mm (5.80 x 3.62 in)Physical size (W x D x H) 248.2 x 176.1 x 8.5 mm (9.78 x 6.94 x 0.33 in), approximately, excluding pen holder and rubber feetWeight 360 g (0.79 lb), approximatelyPen tip travel 1.0 mm (0.04 in) or lessPressure levels 512 levelsPhysical size (L x D) 149.0 x 11.8 mm (5.87 x 0.46 in)Weight 13 g (0.46 oz), approximatelyPen tip type Polyacetal (Part No. PSI-A057-01), black
Contents IndexContents 73Index73PRODUCT INFORMATIONTo learn more about Bamboo and how to take full advantage of the many pen and digital inking features in Microsoft Windows Vista, visit the Wacom web site for your region:ORDERING PARTS AND ACCESSORIESTo purchase parts and accessories, refer to the Wacom tablet Read Me file and see who to call for your region.You can also do the following:• To purchase parts and accessories in the USA or Canada, call 1.888.884.1870 (toll-free) or visit Wacom’s web site at http://www.WacomDirect.com (USA only).• To purchase parts and accessories in Europe, call +49 (0)180.500.03.75 or send an email to spareparts@wacom.eu. Or, visit the Wacom web site at http://www.wacom-shop.net. You can also contact your local dealer, distributor, or technical support using the appropriate number for your region.• To purchase parts and accessories in Australia, Singapore, Taiwan and Korea, please visit: www.BuyWacom.com.au, www.BuyWacom.com.sg, www.BuyWacom.com.tw and www.BuyWacom.co.kr, respectively.• To purchase parts and accessories in other countries, please contact your local dealer or distributor.Please note that not all parts and accessories are available in all regions.USA, Canada, Central and South America http://www.wacom.com/productinfoEurope, Middle East and Africa http://www.wacom.euJapan http://tablet.wacom.co.jpAsia Pacific (English) http://www.wacom-asia.comChina (Simplified Chinese) http://www.wacom.com.cnKorea http://www.wacomkorea.comTaiwan http://www.wacom.com.twThailand http://www.wacom-thai.com
Contents IndexContents 74Index74RADIO AND TELEVISION INTERFERENCEThe equipment described in this manual generates, uses, and can radiate radio-frequency energy. If it is not installed and used properly—that is, in strict accordance with Wacom instructions—it may cause interference with radio and television reception.FCC NOTICEThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.You can determine whether the equipment is causing interference by disconnecting it from your computer. If the interference stops, it was probably caused by the equipment.If the equipment does cause interference to radio or television reception, you may be able to correct the interference by using one or more of the following measures:• Rotate the television or radio antenna until the interference stops.• Move the equipment farther away from the television or radio.• Plug the equipment and computer into an outlet that is on a different circuit from the television or radio.If necessary, consult your Wacom dealer or an experienced radio/television technician for help.Changes or modifications to this product not authorized by Wacom could void the FCC Certification and negate your authority to operate the product.See also Industry Canada (Canada only) and CE declaration.
Contents IndexContents 75Index75INDUSTRY CANADA (CANADA ONLY)Industry Canada, Class B“This Class (B) digital apparatus complies with Canadian ICES-003”“Cet appareil numerique de la classe (B) est conforme a la norme NMB-003 du Canada.”CE DECLARATIONThe Wacom Bamboo™ digitizing tablet, models CTT-460, CTH-460, CTH-461, CTH-661, and CTL-460, has been tested and found to comply with the following harmonized European Norms:• EN55022 : 2006, Class B• EN55024 : 1998+A1:2001+A2:2003Based on the results of these tests, Wacom declares that the above mentioned device conforms to Directive 2004/108/EC and indicates this conformity by the CE-sign on each device.The device must be installed and operated always in strict accordance with the instructions given in this handbook. Any changes or modifications to this product that were not specifically authorized will invalidate this declaration.
Contents IndexContents 76Index76PRECAUTIONSWARNINGSDo not place or leave the tablet or pen (when equipped) within reach of children. If your product is used improperly there is a potential for accident or human injury. Prevent children from swallowing the pen nib or button part. The pen nib, button part, or other movable parts may accidentally be pulled out if children are biting on them. Small parts, such as the pen nib or nib refills, or pen button part can be removed and accidentally swallowed by children.Do not use the tablet in a facility control system that requires extremely high reliability. It may cause other electronic devices to malfunction, or other devices may cause the tablet to malfunction. Power off your tablet in locations where/when electronic devices are not allowed. Because the tablet may cause other electronic devices to malfunction in some locations where/when the use of electronic devices is not allowed, such as within an airplane, be sure to turn off the tablet by unplugging the USB connector of this product from your computer.Do not disassemble the tablet or pen (when equipped). Do not disassemble or otherwise modify the tablet or pen. Such action may cause heat generation, ignition, electrical shock, or other damage, including human injury. Disassembly of the product will void your warranty.Take note of damaged cabling. If you notice that your tablet cabling is torn or otherwise damaged, there is a potential for product malfunction, electrical shock, or fire. Stop using the product and contact your local distributor or the Wacom customer support center for your region.Do not expose this product to water or other liquids. Take care to never spill liquids onto the tablet or pen (when equipped). Exposing this product to water or other liquids may cause product malfunction or electrical shock. If the product is exposed to water or other liquids, unplug the USB connector. If your product is equipped with a power cord, unplug the cord from the wall outlet. Power down your computer. Then disconnect any other cables that may remain between the tablet and your computer. Stop using the product and contact your local distributor or the Wacom customer support center for your region.Do not insert foreign material into the USB plug end or any other opening of this product. If a metal object or foreign material is inserted into the USB plug or other opening of this product, it may cause the product to malfunction or burn out, or cause electrical shock. See also cautions.
Contents IndexContents 77Index77CAUTIONSDo not place or use this product on an unstable surface or workspace. Do not place this product on a shaky, inclined, or vibrating surface. It may drop or fall off, causing damage to the product or human injury.When cleaning your tablet, power off the unit by unplugging the USB connector from between the tablet and your computer. Electrical shock may occur if you attempt to clean this product when it is connected to your computer.Further precautions regarding your tablet:• If equipped with a pen, do not apply heavy stress to the pen tip, eraser, or button part. It may shorten pen tip life or may cause the pen to malfunction.• If equipped with a pen and a distorted or bent pen nib is used, the pen tool may operate improperly. Therefore, do not apply excessive force when using the pen.• If equipped with a pen, using a pen nib other than one specifically designed by Wacom for your pen input tool may cause product malfunction.• When using the pen holder and to avoid damaging the pen (if equipped), do not use excessive force when inserting or removing the pen from the holder. Also, do not store the pen within the pen holder in such a way that the pen tip, buttons, or eraser are continually depressed.• Do not excessively rub, abrade, or apply liquid to the pen holder (if equipped). These actions may cause threading frays or discoloration of the pen holder.• Do not place metal objects on this product when it is in use. Metal objects placed on the tablet during use may cause interference, improper operation, or product malfunction.See also warnings.
Contents IndexContents 78Index78LICENSE AND WARRANTIES (WORLDWIDE, EXCEPT FOR EUROPE, AFRICA AND MIDDLE EAST)SOFTWARE LICENSEThis legal document is an agreement between you, the end-user, and Wacom Technology Corporation (Wacom).1. Grant of License. The enclosed product includes computer programs embedded in firmware and accompanying diskette or CD-ROM (the “Software”). The Software is licensed, not sold, to you for use only with Wacom products upon the terms of this license, and Wacom reserves any rights not expressly granted to you. Wacom grants to you a non-exclusive right to use this copy of the Software in conjunction with a Wacom product at a single location.2. Ownership of Software. Although you may own the product in which the Software is originally recorded, Wacom retains ownership of the Software itself. You acknowledge that the Software is Wacom’s property, and contains valuable confidential, unpublished information developed or acquired by Wacom at great expense, including data processing algorithms, innovations and concepts. The Software is protected by copyright and other federal and state laws. You agree to use your reasonable best efforts to protect the Software from unauthorized reproduction, distribution, disclosure, use, or publication.3. Copy Restrictions. Unauthorized copying of the Software is expressly forbidden.4. Use Restrictions. You may not decompile, reverse assemble, disassemble or reverse engineer the Software.5. Termination. This License is effective until terminated. This License will terminate automatically without notice from Wacom if you fail to comply with any provisions of the License.6. Miscellaneous. This License is governed by the laws of the United States of America and the state of Washington except in Asia Pacific and by the laws of Japan for Asia Pacific.LIMITED WARRANTYWacom warrants the product, to the original consumer purchaser, except for the Software, pen holder and consumable items such as the pen nibs, to be free from defects in materials and workmanship under normal use and service for a period of one (1) year, from the date of original retail purchase, as evidenced by a copy of the receipt and registration with Wacom within 30 days of purchase.The Software is licensed “as is.” Wacom makes no warranty with respect to its quality or performance. Wacom cannot guarantee you uninterrupted service or the correction of any errors.Upon discovery of a defect in the product, except in the Software, within the Warranty Period, you should contact Wacom Technical Support via telephone, email, or fax to obtain an RMA (Return Merchandise Authorization) number and instructions for shipping the product to a service location designated by Wacom. You should send the product, shipping charges prepaid, to the designated service location, accompanied by the return authorization number, your name, address and telephone number, proof of purchase date, and a description of the defect. Wacom will pay for return shipping by United Parcel Service or by an equivalent service as chosen by Wacom.
Contents IndexContents 79Index79Wacom’s sole obligation and entire liability under this warranty shall be, at Wacom’s option, either the repair or replacement of the defective product or parts thereof of which Wacom is notified during the Warranty Period; provided, however, that you are responsible for (i) the cost of transportation of the product to the designated service location and (ii) any loss or damage to the product resulting from such transportation.Wacom shall have no responsibility to repair or replace the product if the failure of the product has resulted from accident, abuse, misuse, negligence, or unauthorized modification or repair, or if it has been handled or stored other than in accordance with Wacom’s storage instructions.Any descriptions, drawings, specifications, samples, models, bulletins, or similar material, used in connection with the sale of the product, shall not be construed as an express warranty that the product will conform or comply with your requirements.EXCEPT FOR THE LIMITED WARRANTY DESCRIBED ABOVE, THERE ARE NO OTHER WARRANTIES MADE BY WACOM ON THIS PRODUCT. NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY WACOM, ITS DEALERS, DISTRIBUTORS, AGENTS, OR EMPLOYEES SHALL CREATE A WARRANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY, AND YOU MAY NOT RELY ON ANY SUCH INFORMATION OR ADVICE. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.WACOM LIMITS THE DURATION OF ANY LEGALLY IMPLIED WARRANTIES INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, TO THE DURATION OF WACOM’S EXPRESS WARRANTY. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.NEITHER WACOM NOR ANYONE ELSE WHO HAS BEEN INVOLVED IN THE CREATION, PRODUCTION, OR DELIVERY OF THIS PRODUCT SHALL BE LIABLE FOR ANY DIRECT, CONSEQUENTIAL, OR INCIDENTAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION AND THE LIKE) ARISING OUT OF THE USE OF OR INABILITY TO USE SUCH PRODUCT, EVEN IF WACOM HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.In the event that any of the above limitations are held unenforceable, Wacom’s liability for any damages to you or any party shall not exceed the purchase price you paid, regardless of the form of any claim.This Limited Warranty is governed by the laws of the United States of America and the state of Washington.This Limited Warranty is valid for and only applies to products purchased and used inside the United States (and its territories or possessions) and Canada.WARRANTY SERVICE IN THE U.S.A. AND CANADATo obtain Warranty service within the U.S. or Canada contact:Wacom Customer Care CenterPhone: 1.360.896.9833Email inquiry form: http://www.wacom.com/productsupport/email.cfm
Contents IndexContents 80Index80WARRANTY ON SALES OUTSIDE OF THE U.S.A. AND CANADAFor products purchased or used outside of the United States and Canada, upon discovery of a defect in the product, except in the Software, within the Warranty Period you should contact your local dealer or distributor. In all other respects the terms of the warranty as set forth above apply to such sales.Wacom Technical Support in Asia Pacific (except Japan and China)Detailed Asia Pacific Limited Warranty policy and product registration may be found online at http://www.wacom-asia.comTo obtain technical support or Warranty service within Southeast Asia, Oceania and Taiwan, please contact the Wacom Customer Support Service. Phone numbers can be found here: http://www.wacom-asia.com/support/contactShould you have any questions about this Agreement, or if you desire to contact Wacom for any reason, please contact in writing:IN NORTH AND SOUTH AMERICA CONTACT: IN JAPAN CONTACT:Wacom Technology Corporation Wacom Co., Ltd.1311 S.E. Cardinal Court 2-510-1 ToyonodaiVancouver, Washington 98683 Otone-Machi, Kitasaitama-GunU.S.A. Saitama, 349-1148JapanIN ASIA PACIFIC CONTACT: IN MAINLAND CHINA (EXCEPT HONG KONG) CONTACT:Wacom Co., Ltd. Wacom China CorporationAsia Pacific Office Unit 2807, 28th Floor, SK TowerHarmony Tower 18F, 1-32-2 Hon-Cho, No 6 Jia, Jianguomenwai Avenue,Nakano-Ku, Tokyo 164-0012 Beijing, 100022, ChinaJapan E-mail: support@wacom.com.cn
Contents IndexContents 81Index81LICENCE WARRANTY CONDITIONS(EUROPE, AFRICA AND MIDDLE EAST)SOFTWARE LICENCE AGREEMENTImportant customer informationThe scope of delivery of this product covers copyright-protected computer programs ("software"), which are the inalienable intellectual property of WACOM Europe GmbH ("WACOM"). This software is an integral component of the product and is also held on the associated data carrier. The software of WACOM and the associated rights of use are not included with the purchase of this product from your retailer. WACOM grants you-the user-the right to use the software exclusively in accordance with the conditions stipulated in this licence agreement. By purchasing this product, you agree to the following licence conditions.Conditions for using the softwareWACOM issues the user with a personal, non-exclusive licence to use the software solely in connection with this product and for the correct operation of the product. This licence may only be assigned to a third party in connection with this product.Use of this software includes the creation of permanent or temporary copies of the software by means of loading, displaying, exporting, transferring or saving, for the purposes of exporting the commands and the data they contain or for observing, researching or testing the software functions.The customer may not license the software to a third party, lease, lend or in any other way provide access to the software. The customer may not copy, change, transfer or edit the software without prior written agreement from WACOM. The only exceptions to this are necessary procedures for creating a back-up copy and the scenarios outlined in section 2. The customer may not carry out any "reverse engineering", decompile or depacketise the software, or try by any other means to discover the source code of the software. This restriction shall continue to apply after the termination of this agreement. If the software contains interfaces to other programs that are not supported by WACOM, WACOM shall provide the customer with the necessary information on request, as long as the customer can prove his right to use the software and agrees to bear the copying and postage costs.WACOM AND ITS SUPPLIERS CANNOT OFFER ANY GUARANTEE FOR THE PERFORMANCE OF THE SOFTWARE OR FOR THE RESULTS PRODUCED THERE FROM. WACOM AND ITS SUPPLIERS OFFER NO GUARANTEES OR ASSURANCES (EITHER EXPRESSLY OR IMPLICITLY, INCLUDING THOSE THAT MAY BE DERIVED FROM A BUSINESS RELATIONSHIP OR FROM TRADE PRACTICE, OR FROM LEGAL PROVISIONS OR CUSTOMARY LAW) WITH REGARD TO THE MARKETABILITY, FREEDOM FROM DEFECTS OF TITLE OR USEFULNESS OF THE SOFTWARE.WACOM AND ITS SUPPLIERS ACCEPT NO LIABILITY FOR DAMAGES, CLAIMS OR COSTS OF ANY KIND, NOR FOR CONSEQUENTIAL DAMAGES, SECONDARY, ACCIDENTAL, INDIRECT OR PENAL DAMAGES, PARTICULAR OR MISCELLANEOUS DAMAGES OR FOR DEMANDS OR INDEMNITY CLAIMS FOR REDUCED PROFITS OR LOSSES. THIS SHALL ALSO APPLY IN THE CASE OF A REPRESENTATIVE OF WACOM BEING PREVIOUSLY AWARE OF THE POSSIBILITY OF SUCH LOSSES, DAMAGES, CLAIMS OR COSTS, OR DEMANDS FROM THIRD PARTIES.
Contents IndexContents 82Index82The existing limitations on liability shall not apply in the case of the assumption of explicit guarantees, or in case of fraudulent behaviour on the part of WACOM, nor for damages arising from wilful or grossly negligent behaviour on the part of WACOM, from damages leading to loss of life, personal injury or sickness or in the case of binding legal provisions. For slight negligence, WACOM and its suppliers shall only be liable in the event of a breach of essential contractual obligations. Liability when such an essential contractual obligation is breached is, however, limited to damages typical to this type of contract, which WACOM must have determined at the conclusion of the contract based on the known risks and circumstances at that time. Claims for reduced profits or expenses saved, indemnity claims from third parties or claims for any other direct or consequential damages still cannot be asserted in this case.The laws of the Federal Republic of Germany shall apply to this agreement. However, the applicability of the United Nations Convention on Contracts for the International Sale of Goods is explicitly excluded. Krefeld is the sole place of jurisdiction for all claims arising from this contractual relationship and all disputes between the parties resulting from the formation, handling or termination of the contractual relationship, provided that the customer is a trader, a legal entity under public law or a special fund under public law. The jurisdiction agreement shall also apply for customers who do not have a general place of jurisdiction in Germany. The jurisdiction agreement shall not apply if, due to legal provisions, a different sole place of jurisdiction must be established for the case. Furthermore, WACOM is authorised to file a lawsuit against the headquarters of the customer.This licence constitutes the entire contractual agreement between the parties. It overrides all other verbal and written contracts and agreements and may only be altered by means of a written and signed contract. Should one of the provisions of these licence conditions be or become void, the validity of the other provisions shall not be affected, in full or in part. Should a provision be invalid, the legally permissible regulation most closely resembling the invalid regulation shall apply in its place.LIMITED WARRANTYWACOM guarantees to you, as the initial purchaser, that the product hardware, when used as intended, will remain free from material defects and processing errors for a warranty period of TWO (2) YEARS and Cintiq products shall be guaranteed for a warranty period of THREE (3) YEARS, commencing from the purchase date and provided that the product was unused at the time of purchase. Defects in wear parts (e.g. pen tips) resulting from normal wear and tear are exempt from the warranty. Furthermore, WACOM guarantees that the data carriers delivered with the product are free from material defects and processing errors for a period of SIX (6) MONTHS from the date of purchase. If the product-excluding any software-is discovered to be faulty it must be returned immediately to the place of purchase in its original packaging within the warranty period together with your name, address and telephone number, a description of the problem and a copy of the original receipt. The customer shall be liable for any possible damage or loss of the product during transit for this purpose. Under the provisions of this warranty, WACOM only undertakes to repair or replace the faulty product or parts at its own discretion, in cases where defects are proven and the product is sent within the warranty period.WACOM is not obligated to repair or replace the product if: (a) the damage to the product results from any accident, misuse, improper use, negligence or unauthorised alteration or repair; (b) the product was not handled or stored according to the instructions provided by WACOM; (c) the damage resulted from normal wear and tear; or d) the serial number affixed by WACOM has been removed or rendered unintelligible.If, when a claim made under this warranty is checked, it emerges that it is outside the permitted time period or is not covered by the warranty or that the product is not faulty, the costs of any checks or repairs must be borne by the customer.
Contents IndexContents 83Index83Any descriptions, drawings, specifications, samples, models, notifications or similar material provided in connection with the purchase of the product cannot be taken as an explicit guarantee that the product corresponds to or fulfils the customer's requirements.If this product is faulty, the purchaser shall be entitled to assert legal claims against the vendor for liability due to defects. These legal rights against the vendor are not limited by the existing warranty. The warranty grants the customer many additional rights under the conditions stipulated in this text.This limited warranty shall apply if the registered office of the vendor is in the EU or in Iceland, Norway, Jersey, Switzerland, Russia, Ukraine, Croatia, Serbia, Tunisia, Turkey, Syria, Lebanon, Jordan, Israel, Egypt, United Arab Emirates, Iran or South Africa.The granting of this limited warranty is subject to the laws of the Federal Republic of Germany. However, the applicability of the United Nations Convention on Contracts for the International Sale of Goods is explicitly excluded. Krefeld is the sole place of jurisdiction for all claims arising from this contractual relationship and all disputes between the parties resulting from the formation, handling or termination of the contractual relationship, provided that the customer is a trader, a legal entity under public law or a special fund under public law. The jurisdiction agreement shall also apply for customers who do not have a general place of jurisdiction in Germany. The jurisdiction agreement shall not apply if, due to legal provisions, a different sole place of jurisdiction must be established for the case. Furthermore, WACOM is authorised to file a lawsuit against the headquarters of the customer.Should one of the provisions of these limited warranty conditions be or become void, the validity of the other provisions shall not be affected, in full or in part. Should a provision be invalid, the legally permissible regulation most closely resembling the invalid regulation shall apply in its place.If you have any questions about this agreement, or would like to contact WACOM for another reason, please contact us by post at this address:WACOM Europe GmbHEuropark Fichtenhain A947807 KrefeldGERMANY
Contents IndexContents 84Index84GLOSSARYActive area. The navigation and drawing area of your Bamboo tablet where touch or pen input is detected. See touch sensor.Aspect. The ratio between the vertical and horizontal dimension of the tablet or display.Click force. The amount of force you must apply to the tip of the pen for a click to occur.Digital Ink. A broad category that typically describes handwritten content which has been created using pen-based input on a computer. This handwritten content takes the form of sketches, ink mark-up, or handwriting. The handwriting can optionally be converted to typewritten text or simply left alone for use in its original format. Depending on your system and application settings, the handwritten text you make with digital ink can be converted on-the-fly or at another time.Double-click distance. The maximum distance (in screen pixels) that the screen cursor can move between clicks and still be accepted as a double-click. Increasing the double-click distance makes double-clicking easier, but may cause a delay in line strokes in some applications.Eraser-aware application. A software application that has built-in support for the pen eraser. These applications take advantage of the eraser in different ways, depending on what makes sense for the application.Expand. A motion used when navigating with touch. Touch the tablet with two fingers spaced closely together. Then while still touching the tablet surface, move your fingers apart.ExpressKeys. The customizable control keys located on your Bamboo tablet.ExpressKeys, LEFT HANDED. A tablet setting where the ExpressKeys are oriented to the right of the tablet.ExpressKeys, RIGHT HANDED. A tablet setting where the ExpressKeys are oriented to the left of the tablet.Journal. A Microsoft Windows application that electronically simulates a physical journal pad, but with the advantages of digital note-taking. For example, you can create quick sketches and jot handwritten notes that can be converted to text and sent on to colleagues for digital mark-up. Journal includes a variety of pen, marker, and highlighter tools, plus an eraser that is easily activated by the eraser end (when equipped) of the pen. Additionally, your handwritten content is searchable within Journal.Mapping. The relationship between the pen position on your Bamboo tablet and the cursor position on the monitor screen.Modifier. Modifier keys include SHIFT, ALT, and CTRL for Windows, or SHIFT, CONTROL, COMMAND, and OPTION for Macintosh. You can customize your Bamboo tablet or pen buttons to simulate a modifier key.
Contents IndexContents 85Index85Mouse acceleration. A setting that allows you to adjust the screen cursor acceleration when your pen is in mouse mode.Mouse mode. A method for positioning the screen cursor. When you place the pen on your Bamboo tablet, you can move the screen cursor with a “pick up and slide” motion similar to using a traditional mouse. This is known as relative positioning. See also pen mode.Mouse speed. A setting that allows you to adjust the speed at which your screen cursor moves when your pen is in mouse mode.Nib. The replaceable pen tip.Pan. A motion used when navigating with touch. Touch the tablet surface with two fingers and move them in the same direction.Pinch. A motion used when navigating with touch. Touch the tablet with two fingers spaced slightly apart. Then while still touching the tablet surface, move or ‘pinch’ your fingers together.Pen mode. A pen input method of positioning the screen cursor. Wherever you place the pen on your Bamboo tablet, the screen cursor will jump to the same corresponding point on the screen. This is known as absolute positioning, and is the default setting for the pen. Also, PEN MODE allows you to quickly position the screen cursor without having to first find it and then move it across the desktop. See also mouse mode.Pixel. The smallest unit of measure on your monitor screen.Pen input. A method of controlling a computer using the pen on your Bamboo tablet.Pop-up Menu. A user-defined menu that displays a list of keystroke functions and other actions you can perform. You can customize the buttons of your pen to display this menu. Available for tablet models that are configured for both pen and touch input.Pressure-sensitive. A quality of the pen tip and eraser (when equipped) that senses the amount of pressure being applied. This is used to create natural-looking pen, brush, and eraser strokes in applications that are pressure-sensitive.Pressure-sensitive application. Any application that supports pressure-sensitive input.Proximity. The height above the tablet active area where the pen is detected. See also positioning.Screen cursor. The pointer on the display screen. Screen cursors come in different shapes (such as an I-beam, arrow, or box), depending on which application you are running.Swipe. A motion used when navigating with touch. Touch the tablet surface with two fingers and move them in the same direction at a relatively high speed.
Contents IndexContents 86Index86Tablet PC Input Panel (TIP). The Microsoft Windows Vista Tablet PC Input Panel enables you to use your pen to create handwritten notes or work with an on-screen keyboard. The Input Panel dynamically converts your handwriting to text. The information you create can then be inserted into other documents, spreadsheets, or illustrations. See also pen and digital ink capabilities in Windows Vista.Touch input. A method of interacting with a computer using only your fingertips on the Bamboo tablet.Touch sensor. The navigation area of your Bamboo tablet where touch input is detected. The touch sensor resides within the active area, and does not accept pen input.Tap. A motion used when navigating with touch. Touch and lift a single finger from the tablet.Track. A motion used when navigating with touch. Touch and move a single finger across the tablet surface.Twist. A motion used when navigating with touch. Touch the tablet with two fingers spaced slightly apart and move (rotate) them in a circular fashion, or move them in opposing directions. Alternatively, hold one finger stationary and track your other finger around the stationary finger.USB. Universal Serial Bus. A hardware interface standard for connecting computer peripheral devices. USB ports support hot-plugging, which allows you to connect or disconnect a USB device without turning off your computer.Wintab. An interface standard used by Windows applications for receiving tablet information. Bamboo supports all Wintab-compatible applications under Windows.
Contents IndexContents 87Index87INDEXAbout the manual 5Accessories and parts, ordering 73Active area, understanding 15Bamboocaring for 66customizing 35Expresskey basics 26pen input 27problems with 54product features 7tablets matrix 7the pen experience 27the touch experience 18touch input 18troubleshooting 54using 18Button functions 50Care, for Bamboo 66Cautions 77CE declaration 75Click sound 30Clicking, with pen 30Control panelbasics 17opening 35overview 36CustomizingBamboo 35button functions 50double-click distance 42eraser feel 42ExpressKeys 26functions 39pen 41acceleration in mouse mode 48buttons 43input 34speed in mouse mode 48Pop-up Menu 49tablet orientation 39tip feel 42touchfunctions 38input 37Digital inking capabilities 68Disabling touch input 40Double-click distance, customizing 42Double-clicking, how to 30Dragging, with pen 30Drawing with pressure 32Driver downloads, obtaining 64Environmental conditions 66Eraser Feel, customizing 42Erasing, with pen 33Ergonomics 12ExpressKeysbasics 26customizing 26setting functions 39using 26Eye-hand coordination exercise 34FCC notice 74Featurespen 11pen & touch models 9pen holder 11pen models 10touch models 8Functions, button 50General problems, troubleshooting 57Holding the pen 27Industry Canada notice 75Information, product 73Interference, radio and television 74Macintosh-specific problems, troubleshooting 61
Contents IndexContents 88Index88Manualabout 5navigating 6Mappingtablet 44to multiple monitors 17Monitors, working with multiple 17Navigating the manual 6Navigation, customizing for touch input 37Nib, replacing 66Ordering parts and accessories 73Orientationconfiguring for tablet 14setting for tablet 39Overview, control panel 36Parts and accessories, ordering 73Penbuttonscustomizing 43using 31clicking with 30customizing 41double-clicking with 30dragging with 30drawing with pressure 32erasing with 33features 11holding 27input problems, troubleshooting 59input, customizing 34nib, replacing 66pointing with 28positioning with 28speed, setting 48testing 56the experience 27tip, replacing 66using 27on tablet 28pen buttons 31writing with pressure 32Pen holder 11Pointing, with pen 28Pop-up Menu, customizing 49Positioning, with pen 28Precautions 76Pressuredrawing with 32writing with 32Problems, with Bamboo 54Productfeatures 7information 73specifications 70Proportions and scale 45Radio and television interference 74Scale and proportions 45Settings, control panel 36Softwaredriver downloads 64uninstalling 67SpecificationsBamboo Fun medium tablet 71Bamboo Fun small tablet 71Bamboo Pen tablet 72Bamboo tablet 70Bamboo Touch tablet 70general 70Pen, for Bamboo 71Pen, for Bamboo Fun 71Pen, for Bamboo Pen 72product 70Tabletconfiguring orientation 14ExpressKeys 26features matrix 7mapping 44area 45for portion of screen area 46for portion of tablet area 47to multiple monitors 17orientation, setting 39pen & touch model features 9pen model features 10scale and proportions 45storing 66
Contents IndexContents 89Index89testing 55touch model features 8tracking 44Tablet PC Input Panel, about 69Technical support options 63Testingpen 56tablet 55Tipcustomizing feel 42replacing 66Touchadjusting touch speed 37basic actions 20customizing 25disabling 40gestures 23input problems, troubleshooting 58input, customizing 37navigating with 19options 19setting navigation features 37setting touch functions 38speed, adjusting 37the experience 18Tracking, tablet 44Troubleshooting 54general problems 57Macintosh-specific problems 61pen input problems 59tables 57touch input problems 58Windows-specific problems 60Uninstalling tablet software 67Using Bamboo 18Warnings 76Windows-specific problems, troubleshooting 60Work area, setting up 12Writing with pressure 32
Contents IndexContents 90Index90WACOM INTERNATIONAL OFFICESWACOM TECHNOLOGY CORPORATION WACOM EUROPE GMBH1311 S.E. Cardinal Court Europark Fichtenhain A9Vancouver, WA 98683 47807 KrefeldU.S.A. GermanyTelephone: +1.360.896.9833 Telephone: +49.(0)2151.3614.0Fax: +1.360.896.9724 Fax: +49.(0)2151.3614.111WACOM CO., LTD.Japan Marketing and Sales Division WACOM CO., LTD.Asia Pacific Marketing and Sales DivisionHarmony Tower 21F, 1-32-2 Hon-Cho, Harmony Tower 18F, 1-32-2 Hon-Cho,Nakano-Ku, Tokyo 164-0012 Nakano-Ku, Tokyo 164-0012Japan JapanInternet: http://tablet.wacom.co.jp Telephone: +81.3.5309.1513Fax: +81.3.5309.1514WACOM CHINA CORPORATION WACOM KOREA CO., LTD.Unit 2807, 28th Floor, SK Tower 25th Floor DMC iaan Sangam 2nd Complex, 1653No 6 Jia, Jianguomenwai Avenue, Sangam-dong, Mapo-gu, Seoul, Korea, 121-270Beijing, 100022, China KoreaInternet: http://www.wacom.com.cn Telephone: +82.2.557.3894Fax: +82.2.557.3895WACOM AUSTRALIA PTY. LTD. WACOM SINGAPORE PTE. LTD.Unit 8, Stage 1 Cumberland Green 3 Bishan Place,2-8 South Street Rydalmere CPF Bishan Building #06-08NSW 2116 Australia Singapore 579838Telephone: +61.2.9422.6700 Telephone: +65.6258.8640Fax: +61.2.9420.2272 Fax: +65.6258.8697WACOM TAIWAN INFORMATION CO., LTD.Suite 605, 6th floor, No. 205 Tun-Hwa North RoadTaipei, 105 TaiwanTelephone: +886.2.2712.2675Fax: +886.2.2712.9789

Navigation menu