Prime UF-601 Wireless electronic key finder User Manual user s Manual

Prime Enterprises, LLC Wireless electronic key finder user s Manual

user manual

Wireless Key Finder Instruction
Product Introduction:
This key finder includes two parts. One is the Transmitter, the other is the Receiver.
The Transmitter has button on the face and upon pressing the button on it, the lost
item which attached by the Receiver will beep and light flash. Then you can find the
lost items easily.
Operation Direction:
1. RemovebatteriesandplasticsheetfromTransmitterandReceiver.
2. InsertbatterybackintoTransmitter
3. NowinsertbatteryintotheReceiver;PleasecheckwhetherthisReceiverwill
beepanditslightflashwithbeep'srhythm.Ifitbeepandlightflash,itstands
electricityhasbeenledintotheReceiverwell.
4. PressButtononTransmitter during20seconds upon finishingStep3.Please
checkwhetherReceiverbeepstwiceandlightfalshestwice,too.Ifyes,it
standsReceiverhasbeenprogrammedwithButtononTransmitter.Andthis
ButtonwillcontrolandhelpfindtheReceiver.
5. SincetheReceiverisprogrammedwiththeButtonwell.Pleaseholdand
presstheButtonforseveralsecondsuntiltheReceiverbeepsandflash.(This
procession,pleasepressthebuttonwithoutreleaseuntilReceiverbeeps.As
inordertosavepowerconsumption,allReceiversworkintermittently.That
Receiverissuppliedwithpowerper4seconds.Sosometimeswhenyoupress
thebutton,buttheReceiverdoesn'tworkduetoitsstandbytime)
6. Testconfigurationbypressingandholdingbutton.Itshouldbeep
continuously.Thismeansallarecorrect.
7. Ifitdoesn’tworkpleasemakesurethatyouhadfollowedthe6stepsabove.
Trouble Shooting
1. Receiverdoesn’tbeep.Tryreplacingbatterythenpressthebuttonon
Transmitterforaround5secondsuntilReceiverbeeps.
2. Receiverconstantlybeeps.Thisisalowbatterywarning‐batteryneeds
replacement.
3. Thestickingrubbersheetdoesn’twork.Lightlydampenrubbersheetandit
willworkbetter.
Specifications
Voltage: 12V (transmitter) 3V (receiver)
Batteries: 27A ,12V for Transmitter, CR2032 ,3V for Receiver
Remote Distance: 25-30 meters
Sound Volume :85-90 dB
Frequency: 433.92 MHz
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.

Navigation menu