Pro Nets Technology WP61R2 WIRELESS PCI ADAPTER User Manual

Download:
Mirror Download [FCC.gov]
Document ID	778088
Application ID	kxzt2cRxkHc9wKNvR4na0w==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	70.86kB (885749 bits)
Date Submitted	2007-04-06 00:00:00
Date Available	2007-04-06 00:00:00
Creation Date	2007-03-13 14:30:22
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2007-03-13 14:30:22
Document Title	Users Manual

Wireless 54Mpbs PCI Adapter
User’s Manual
(For SOHO Users)
September 2006
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communication. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
Consult the dealer or an experienced radio/TV technician for help. the receiver is
connected.
FCC Caution: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of
about eight inches (20cm) between the radiator and your body.
This transmitter must not be co-located or operated in conjunction with any other antenna or
transmitter.
CE Mark Warning
This is a Class B product. In a domestic environment, this product may cause radio
interference, in which case the user may be required to take adequate measures.
Copyright
1999 All Rights Reserved.
No part of this document can be copied or reproduced in any form without written consent from
the company.
Trademarks:
All trade names and trademarks are the properties of their respective companies.
Revision History
Revision
History
V1.0
First release
Contents
1. Instruction............................................................................... 4
1.1
Features.................................................................................................. 4
1.2
Package Contents ................................................................................. 4
1.3
LED Indicator ......................................................................................... 4
2. Install Driver & Utility ............................................................. 5
2.1
For Windows XP and 2000 ..........................................................5
2.2
For Windows ME and 98SE .......................................................10
3. Wireless Network Configuration Utility.............................. 15
3.1
General........................................................................................15
3.2
Profile..........................................................................................15
3.3
Available Network ......................................................................16
3.4
Advanced....................................................................................18
3.5
Status ..........................................................................................19
3.6
Statistics .....................................................................................19
3.7
Easy Config ................................................................................20
3.8
RT-Set .........................................................................................20
4. Glossary ................................................................................ 21
1. Instruction
Congratulations on purchasing this Wireless 54Mbps PCI Adapter. This Wireless PCI Adapter
is designed to comply with IEEE 802.11g Wireless LAN standard and it is suitable for any
laptop computers and provides maximum data transfer rate up to 54 Mbps. It provides up to a
128-bit level of WEP security to your wireless data transfers. The wireless PCI adapter comes
with software drivers for the most popular Microsoft Windows operating systems and can be
integrated into a larger network, running Windows XP/2000/Me/98SE in either Ad-Hoc mode
(without an access point or router) or Infrastructure mode (with an access point or router), the
configuration of your working environment, or the capabilities or limitations of your computer
systems.
1.1 Features
• Up to 54Mbps data transfer rates
• Supports 64/128-bit WEP data encryption function for high level of security
• Supports WPA-PSK advanced WLAN security
• Supports Infrastructure mode
• Supports Ad-Hoc mode (peer-to-peer communication among any wireless users, no
Access Point required)
• Supports automatic fallback increase data security and reliability
• Supports Power Save mode
• Compliant with PCI v2.2
1.2 Package Contents
• One Wireless PCI Adapter
• One Detachable Antenna
• One CD disk includes driver, utility and user’s manual
1.3 LED Indicator
LED
ACT / LINK
Light Status
Flashing
On
Description
Wireless LAN has Activity (ACT) data being sent.
Wireless LAN has been activated.
2. Install Driver & Utility
Note: If you have installed the Wireless PCI Card driver & utility before, please uninstall
the old version first.
2.1 For Windows XP and 2000
Note: The following installation was operated under Windows XP. (Procedures will be
same for Windows 2000)
Step1: Turn off your PC.
Step2: Insert the Wireless PCI card into the PCI slot of your computer, the system will
automatically find the device and search for its driver. Please click Cancel to continue.
Step3: Insert Wireless 54Mbps PCI Adapter Installation CD into CD-ROM drive then windows
below will appear. Click Install Driver & Utility to begin device driver installation.
Step4: Select the language for this installation from the choices below and click OK to
continue.
Step5: The InstallShield Wizard for Realtek Wireless Network Utility will display, click Next> to
continue.
Step6: Select the country domain for which RTL8185 WLAN is authorized to use. Then, click
Next> to continue.
Step7: Click Yes to continue.
Step8: Please wait for a while for installing process.
Step9: After Wizard has finished the installing, click Finish to compete the setup.
To check if Wireless PCI card is properly installed, you can right-click My Computer
Æ choose Properties Æ click Device Manager.
When Utility setup is completed, the Wireless LAN utility’s main page will automatically
show up on your screen.
Also, a shortcut named Realtek Wireless LAN Utility will appear in the computer’s
desktop. Double click the shortcut and start using the WLAN PCI Card.
2.2 For Windows ME and 98SE
Step1: Turn off your PC
Step2: Insert the Wireless PCI card into the PCI slot of your computer, the system will
automatically find the device and search for its driver. Please click Cancel to continue.
Step3: Insert Wireless 54Mbps PCI Adapter Installation CD into CD-ROM drive then windows
below will appear. Click Install Driver & Utility to begin device driver installation.
10
Step4: Select the language for this installation from the choices below and click OK to
continue.
Step5: The InstallShield Wizard for Realtek Wireless Network Utility will display, click Next> to
continue.
11
Step6: Select the country domain for which RTL8185 WLAN is authorized to use. Then, click
Next> to continue.
Step7: Click Yes to continue.
Step8: After Wizard has finished the installing, click Finish to compete the setup.
12
Step10: For complete your setup, you must restart your computer before you can use the
program. Choose Yes, I want to restart my computer now and click OK.
To check if Wireless PCI card is properly installed, you can right-click My Computer
Æ choose Properties Æ click Device Manager.
13
After restart your computer and the utility setup is completely installed. The Wireless LAN
utility’s main page will automatically show up on your screen as below:
14
3. Wireless Network Configuration Utility
The Configuration Utility is an application that helps you to configure the Wireless LAN PCI
Card and monitor the link status and statistics during the communication process.
3.1 General
In the “Configuration”, you can immediately monitor the link status.
3.2 Profile
In the “Profile”, you can view the current using Available Point(s). You can add, remove or edit
the current Available Point(s). Also you can duplicate the AP or Set current AP as Default.
15
3.3 Available Network
The “Available Network” shows all Access Points, Routers or Adapters nearby when
operating in Ad-Hoc mode.
Click “Refresh” button to collect the SSID and Channel information of all the wireless devices
nearby. If you want to connect to any device on the list, double-click the item on the list, and
the card will automatically connect to the selected device.
If you want to add one Access Point to the profile, click “Add to Profile” button. The Wireless
network properties windows will display. You can configure your Wireless Network Security
for the card.
16
[Network Authentication]
-- Open System: No authentication is needed among the wireless devices.
-- Shared Key: Only Wireless device using a shared key (WEP Key identified) is allowed to
connecting each other. Setup the same key as the wireless device which the card intends to
connect.
-- WPA-PSK: It is a special modem of WPA for home users without an enterprise
authentication server and provides the same strong encryption protection.
-- WPA2-PSK (for WPA2 Personal): This option will be present only if the wireless network
adapter and its driver support WPA2.
-- WPA 802.1X: 802.1x authentication is required in WPA. In the 802.11 standard, 802.1x
authentication was optional.
-- WPA2 802.1X: WPA2 is the next-generation Wi-Fi security standard, combining the most
powerful authentication and encryption techniques to protect wireless networks from
unauthorized use. Based upon the recently-ratified IEEE 802.11i standard, WPA2 adds the
Advanced Encryption Standard (AES) to the original WPA specification to provide the greatest
levels of network security available. The National Institute of Standards and Technology (NIST)
advocates the use of AES security to protect sensitive digital information on government
networks.
[Data Encryption]
-- Disabled: Disable the WEP Data Encryption.
-- WEP: Enabled the WEP Data Encryption. When the item is selected, you have to continue
setting the WEP Key Length & the key Index.
-- TKIP: Enable the TKIP Data Encryption. When the item is selected, you have to continue
setting the Network Key & Confirm network key.
-- Network Key: The keys are used to encryption data transmitted in the wireless network. Fill
in the text box by following rules below:
Æ 64-bit: Input 10 digit Hex values (in the “A-F”, “a-f”, and “0-9” range) as the encryption
keys. For example: “0123456aef”
Æ 128-bit: Input 26 digit Hex values (in the “A-F”, “a-f”, and “0-9” range) as the
encryption keys. For example: “01234567890123456789abcdef”
-- Confirm Network Key: Re-type again the Network key in this text box.
-- Key Length: You may select the 64-bit or 128-bit to encryption transmitted data. Larger key
length will provide higher level of security, but the throughput will be lower.
-- Key Index (Advanced): The maximum of key index is 4.
[802.1X configure]
-- EAP TYPE (Extensible Authentication Protocol Authentication Types): Because WLAN
security is essential and EAP authentication types provide a potentially better means of
securing the WLAN connection, vendors are rapidly developing and adding EAP
17
authentication types to their WLAN access points. Some of the most commonly deployed EAP
authentication types include MD5,GTC,TLS,EAP,TTSL,and PEAP.
-- Tunnel: Use the drag-down list to choose the tunnel.
-- Username: Enter the username for personal certificate.
-- Identity: Enter the Identity for personal certificate.
-- Password: Enter the password in advance.
-- Certificate: Click drag-down list to choose certificate that you want to use.
3.4 Advanced
In the “Advanced”, you can configure Wireless LAN adapter’s Power Save, Wireless Mode,
802.00b Preamble Mode, Region Domain, Fragment Threshold, and RTS Threshold.
18
3.5 Status
In the “Status”, you can view the current link status of Wireless LAN adapter.
3.6 Statistics
In the “Statistics”, you can get the real time information about the packet transmission and
receiving status.
19
3.7 Easy Config
In the “Easy Config”, you can setup Realtek AP more easily. There are two methods for you:
Touch-Button Method & Question-Answer Method”. Select one of following methods to
setup your AP.
3.8 RT-Set
You can select your operation mode (work in AP or Station Mode) by RT-Set Wizard.
When you right-click RTL8185 Wireless system tray icon at right-bottom corner and choose
“RT-Set Wizard”.
There are three modes for you to choose:
„
Station (Infrastructure): Connect to a wireless network through the AP.
„
Station (Ad hoc): Connect to computer-to-computer network.
„
AP: Setup Access Point wireless network.
20
4. Glossary
IEEE 802.11 Standard
The IEEE 802.11 Wireless LAN Standards subcommittee, which is formulating a standard for
the industry.
Access Point
An internetworking device that seamlessly connects the wired & wireless networks together.
Ad Hoc
An Ad Hoc wireless LAN is a group of computers, each with a WLAN adapter connected as an
independent wireless LAN. Ad Hoc wireless LAN is applicable at a departmental scale for a
branch or SOHO operation.
BSSID
A specific Ad Hoc LAN is called a Basic Service Set (BSS). Computers in a BSS must be
configured with the same BSSID.
DHCP
Dynamic Host Configuration Protocol – a method in which IP addresses are assigned by
server dynamically to clients on the network. DHCP is used for Dynamic IP Addressing and
21
requires a dedicated DHCP server on the network.
Direct Sequence Spread Spectrum
This is the method the wireless cards use to transmit data over the frequency spectrum. The
other method is frequency hopping. Direct sequence spreads the data over one frequency
range (channel) while frequency hopping jumps from one narrow frequency band to another
many times per seconds.
ESSID
An Infrastructure configuration could also support roaming capability for mobile workers. More
than one BSS can be configured as an Extended Service Set (ESS). Users within an ESS
could roam freely between BSS s while served as continuous connection to the network
wireless stations and Access Points within an ESS must be configured with the same ESSID
and the same radio channel.
Ethernet
Ethernet is a 10/100Mbps network that runs over dedicated home/office wiring. Users must be
wired to the network at all times to gain access.
Gateway
A gateway is a hardware and software device that connects two dissimilar systems, such as a
LAN and a mainframe. In Internet terminology, a gateway is another name for a router.
Generally a gateway is used as a funnel for all traffic to the Internet.
IEEE
Institute of Electrical and Electronics Engineers.
Infrastructure
An integrated wireless and wired LAN is called an Infrastructure configuration. Infrastructure is
applicable to enterprise scale for wireless access to central database, or wireless application
for mobile workers.
Network
A network is a system of computers that is connected. Data, files, and messages can be
transmitted over this network. Networks may be local or wide area networks.
ISM Band
The FCC and their counterparts outside of the U.S. have set aside bandwidth for unlicensed
use in the so –called ISM (Industrial, Scientific and Medical) band. Spectrum in the vicinity of
22
2.4 GHz, in particular, is being made available worldwide. This presents a truly revolutionary
opportunity to place convenient high-speed wireless capabilities in the hands of users around
the globe.
Local Area Network (LAN)
A LAN is a group of computers, each equipped with the appropriate network adapter card
connected by cable/air, that share applications, data, and peripherals. All connections are
made via cable or wireless media, but a LAN does not use telephone services. It typicallu
spans a single building or campus.
PCMCIA
Personal Computer Memory Card International Association. Also a PCMCIA card is also
referred to Cardbus Adapter.
Protocol
A protocol is a standardized set of rules that specify how a conversation is to take place,
including the format, timing, sequencing and/or error checking.
SSID
A Network ID unique to a network. Only clients and Access Points that share the same SSID
are able to communicate with each other. This string is case-sensitive.
Simple Network Management Protocol (SNMP)
Simple Network Management Protocol is the network management protocol of TCP/IP. In
SNMP, agents-which can be hardware as well as software-monitor the activity in the various
devices on the network and report to the network console workstation. Control information
about each device is maintained in a structure known as a management information block.
Static IP Addressing
A method of assigning IP addresses to clients on the network. In networks with Static IP
address, the network administrator manually assigns an IP address to each computer. Once a
Static IP address is assigned, a computer uses the same IP address every time it reboots and
logs on to the network, unless it is manually changed.
Transmission Control Protocol / Internet Protocol (TCP/IP)
TCP/IP is the protocol suite developed by the Advance Research Project Agency (ARPA). It is
widely used in corporate Internet works, because of its superior design for WANs. TCP
governs how packer is sequenced for transmission the network. The term “TCP/IP” is often
23
used generically to refer to the entire suite of related protocols.
Transmit/ Receive
The wireless throughput in Bytes per second averaged over two seconds.
Wide Area Network (WAN)
A WAN consists of multiple LANs that are tied together via telephone services and/or fiber
optic cabling. WANs may span a city, a state, a country, or even the world.
WPA/WPA2
Wi-Fi Protected Access (WPA/WPA2) is a security enhancement that strongly increases the
level of data protection and access control to a wireless network. WPA enforces 802.1x
authentication and key-exchange and only works with dynamic encryption keys. To strengthen
data encryption, WPA utilizes its Temporal Key Integrity Protocol (TKIP). TKIP provides
important data encryption enhancements that include a per-packet key mixing function, a
message integrity check (MIC) named Michael an extended initialization vector (IV) with
sequencing rules, and a also re-keying mechanism. Using these improvement enhancements,
TKIP protects against WEP's known weaknesses.
The second generation of WPA that complies with the IEEE TGi specification is known as
WPA2.
WPA/WPA2 – Enterprise provides this level of security on enterprise networks with a 802.1x
RADIUS server. An Authentication Type is selected to match the authentication protocol of the
802.1x server.
WPA/WPA2 - Personal provides this level of security in the small network or home
environment. It uses a password also called a pre-shared key (PSK). The longer this password
the stronger the security of the wireless network. If your Wireless Access Point or Router
supports WPA/WPA2 Personal (WPA-PSK) then you should enable it on the access point and
provide a long, strong password. The same password entered into access point needs to be
used on this computer and all other wireless devices that access the wireless network.
24

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2007:03:13 14:30:22+08:00
Modify Date                     : 2007:03:13 14:30:22+08:00
Page Count                      : 25
Creation Date                   : 2007:03:13 06:30:22Z
Mod Date                        : 2007:03:13 06:30:22Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Metadata Date                   : 2007:03:13 06:30:22Z

EXIF Metadata provided by EXIF.tools