Processency FIT True Wireless Bluetooth Earphone User Manual 160727 ELWN FIT Instructions Proof
Process Agency Inc True Wireless Bluetooth Earphone 160727 ELWN FIT Instructions Proof
Manual
More Information At: www.elwn.com/faq
• Charge earbuds for at least 1 hour before using.
• Always keep earbuds within range while pairing for best results.
• If no indicator light is seen when pressing the on/off button, then
recharge earbuds using the provided USB cable.
• To pair your earbuds to a new device, or to re-initiate pairing
mode, press both volume buttons on the left earphone and hold
down until the blue light starts flashing.
Troubleshooting
Pairing
Earbuds
2. On your mobile device, access your Bluetooth settings. Make
sure Bluetooth is in discoverable mode (On).
3. While wearing earbuds, select ELWN Fit True Wireless from
the list of Bluetooth devices and listen for the pairing tone
from your earbuds. This indicates that pairing is complete,
and that you are ready to use your Bluetooth earbuds with
your mobile device.
1. Press and hold the on/off button on both the left & right earbuds,
and look for the blue light to indicate they have successfully
turned on.
4. To confirm pairing is complete, look for the Bluetooth icon
in the status bar of your device.
Instructions:
Pairing Earbuds To Mobile Device
FIT
To Turn On, Press & Hold Power Button On Both Left & Right Earbuds
•250GSM WHITE PAPER
OUTSIDE
CENTER FOLD
DIE LINE
INSIDE
BACK FRONT
ELWN: FIT - TRUE WIRELESS - INSTRUCTION CARD
INSTRUCTION CARD PLACEMENT
EVA
INSTRUCTION CARD
PAPER
FOLDED PAPER TRAY
BOX
ACCESSORY CASE
P.E.T. WINDOW
GLUE
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:(1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.