Proform 831298400 User Manual PRO FORM TREADMILL Manuals And Guides L0010197
PROFORM Treadmill Manual L0010197 PROFORM Treadmill Owner's Manual, PROFORM Treadmill installation guides
535LE L0010197
User Manual: Proform 831298400 831298400 PROFORM PRO-FORM TREADMILL - Manuals and Guides View the owners manual for your PROFORM PRO-FORM TREADMILL #831298400. Home:Fitness Equipment Parts:Proform Parts:Proform PRO-FORM TREADMILL Manual
Open the PDF directly: View PDF 
.
Page Count: 18
| Download | |
| Open PDF In Browser | View PDF |
Model No. 831.298400 Serial No. Find the serial number"in the location shown below. Write the serial number in the space above for reference. HELPLINE! 1-800-736-6879 USER'S MANUAL SEARS, ROEBUCK AND CO., HOFFMAN ESTATES, IL 60179 TABLE OFCONTENTS IMPORTANT PRECAUTIONS ................................................................ BEFORE YOU BEGIN ....................................................................... ASSEMBLY ............................................................................... OPERATION AND ADJUSTMENT ............................................................. HOW TO FOLD AND MOVE THE TREADMILL .................................................. MAINTENANCE AND TROUBLE-SHOOTING ....... . ........................................... CONDITIONING GUIDELINES ............................................................... PART LIST ............................................................................... ORDERING REPLACEMENT PARTS .................................................. FULL 90-DAY WARRANTY ........................................................... Note: An EXPLODED IMPORTANT 2_. DRAWING is attached in the center of this manual. PRECAUTIONS .2 4 5 7 11 12 14 15 Back Cover Back Cover The decals shown have been placed on your treadmill. If a decal is missing, or if it is not legible, please call our Customer Service Department, toll-free, to order a free replacement decal (see ORDERING REPLACEMENT PARTS on the back cover of this manual). Apply the decal in the location shown. • Never allow children on or around ti'eadmill. Storage latch must be ed before moved or stored. • Incline must be set at lowest level before folding treadmill into storage position. KEEP HANDSAND FEET AWAY FROM THIS AREAWHILE THE TREADMILLIS IN OPERATION. 3 BEFORE YOU BEGIN Thank you for selecting the new PROFORM ° 535LE treadmill. The 535LE treadmill combines advanced technology with innovative design to let you enjoy an excellent form of cardiovascular exercise in the convenience and privacy of your home. And when you're not exercising, the unique 535LE _ be folded up, requiring less than half the floor space of other treadmills. For your benefitt read this manuel carefully before using the treadmill. If you have additional questions, please call our toll-free HELPLINE at 1-800-736-6879, Monday through Saturday, 7 a.m. until 7 p.m. Central Time (exoluding holidays). To help us assist you, please note the product model number and serial number before calling. The modal number of the treadmill is 831.298400. The sedat number can be found on a decal attached to the treadmill (see the front cover of this manual for the location). Before reading further, please review the drawing below and fam.iliadze yourself with the parts that are Irabeled. Water Bottle Holder (Bottle no_ included) Handrail Storage Latch LEFT SIDE RIGHT SIDE Walking .Circu_ Breaker Front Wheel F_tR_is r Cord Platform r Roller .-" Adjustment Bolts " ASSEMBLY _.ssembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not Jispose of the packing matedels until assembly is completed. Assembly requires the included allen wrenc_ and your own phillips screwdriver (]_m_ =-",=- . 1. With the help of a second person, carefully raise the treadmill to the upright position. While a second person tips the treadmill to one side and holds it, Insert one of the Extension Legs (103) into the treadmill as shown. Make sure that the Extension Leg is tumed so the Base Pad (97) is on the bottom. Next, tip the treadmill to the other side and insertthe other Extension Leg (not shown) in the same way. Lower the side of the treadmill so that both Extension Legs (103) are resting flat on the floor. 2. Refer to HOW TO LOWER THE TREADMILL FOR USE on page 11. Follow the instructions in step 2 to lower the treadmill. Attach the latch support to the canter hole in the left Upright (82) with a 3/4" Screw (89). Make sure that the Screw is tight, but do not overtighten it; if the Screw is overtightened, the latch will not slide smoothly. 82 Bracket_ Latch_ Remove the tape from the Latch Assembly (77). Be careful to hold the parts in place. Inset drawing (a) shows how the Latch Assembly fits together. Refer to inset drawing (b). Insert the springs into the bracket as shown. Make sure the tabs are touching the bracket and the back end of the latch is flush with the bracket. Spring-Support Flush.._. b Spdng-- Attach the Latch Assembly (77) to the left Upright (82) with two 3/4" Screws (89). 3. Slide the upper end of a Handrail (85) into the right Upright (82) as shown. Note: It will be necessary to pivot the Handrail to the side and back repeatedly (see arrow A) while pushing on the Handrail (see arrow B) to slide it fully into the Upright. Next, pivot the lower end of the Handrail down, push it toward the right Upright, and then align it with the indicated hole. a 2 _ Tab_ 3 d Slide the other Handrail (85) onto the left Upright (82) as described above. Attach the latch spacer and the latch support to the left Upright (82) with a 3/4" Screw (81). Hole 5 4: With the help of asecortd person, carefully tip the Uprights (82) down as shown. Make sure the Extension Legs (103) remain inserted into the Uprights. A_ach one of the Extension Legs with two of the four Short Screws (101) as shown. Attach the other Extension Leg in the same way. 4 Tighten a Handrail Bolt (78) with a Handrail Washer (96) into the right Extension Leg (103) and the lower end of the right Handrail (85) as shown. Note: It may be necessary to move the Handrail up or down to align the Handrail with the hole in the Extension Leg. Next, tighten a Handrail Bolt (78) with a Handrail Washer (96) into the left Extension Leg (103) and the lower end of the left Handrail (85). With the help of a second person, carefully tip the • Uprights (82) back to the upright position. 82 101 '° --lO 3 78 .__'-_l'-L / 98 lO3--.--_'-_, 8 5. Make sure that all parts are tightened before you use the treadmill. To protect the floor or carpet, place a mat under the treadmill. OPERATION I THE PERFORMANT AND ADJUSTMENT LUBE TM WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBE TM, a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear. This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug lllustrated In drawing 1 below. A temporary adapter that looks like the adapter illustrated in drawing 2 may be used to connect the surge suppressor to a 2-pole receptacle as shown in drawing 2 if a properly grounded outlet is not available. HOW TO PLUG IN THE POWER CORD ./iJr-_Grounded _. I Outlet Box _SurgeSupp ressor Greund,ngP,o Grounded Outlet 2 Your treadmill, like any other type of sophisticated electronic equipment, can be seriously damaged by sudden voltage changes in your home's power. /oltage surges, spikes, and noise interference can result from weather conditions or from other appliances being turned on or off. To decrease the possibility of your treadmill being damaged, always use a surge suppressor with your treadmill (see drawing 1 at the right). Surge suppressors are sold at most hardware stores and department stores. Use only a single-outlet surge suppressor that is UL 1449 listed as a transient voltage surge suppressor (TVSS). The surge suppressor must have a UL suppressed voltage rating of 400 volts or less and a minimum surge dissipation of 450 joules. The surge suppressor must be electrically rated for 120 volts AC and 15 amps. This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shook. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. Plug the power cord into a surge suppressor, and plug the surge suppressor into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. Grounding Plug"_ o0 e, u;2o2O= Box ___" Surge Suppressor Metal Screw . _,_ The temporary adapter should be used only until a properly grounded outlet (drawing 1) can be installed by a qualified electrician. The green-colored rigid ear, lug, or the like extending from the adapter must be connected to a permanent ground such as a propedy grounded outlet box cover. Whenever the adapter is used it must be held in place by a metal screw. Some 2-pole receptacle outlet box covers are not grounded. Contact a qualified electrician to determine if'the outlet box cover is greund.ed before using an adapter. 7 CONSOLE DIAGRAM ,Pulse Sensor I Note: If there is a thin sheet of clear plastic on the face of the console, remove iL Follow the steps below to operate the console. B Insert the key fully into the console. When the key is inserted, one indicator will light in the incline display, one indicator will light in the LED track, and the four displays will light. B I.--,/ F _-" t " Press the SPEED _ button to start the walking belt. A moment after the SPEED Z_button is STEP-BY-STEP CONSOLE Before operating the console, make sure that the on/off switch near the power cord is in the on position. OPERATION pressed, the walking belt will begin to move. Hold the handrails and carefully begin walking. Position Next, make sure that the key is removed from the console and then plug in the power con:l (see HOW TO PLUG IN THE POWER CORD on page 7). When you are ready to begin exercising, step onto the foot rails of the treadmill. Find the clip attached to the key (see the drawing above), and slide the clip onto the waistband of your clothing. As you exercise, change the speed of the walking belt as desired by pressing the SPEED buttons. To stop the walking belt, press the STOP/RESET button. The TIME/PACE display will begin to flash. To restart the walking belt, press the SPEED Z_ button again. To stop the walking belt and reset " the displays press the STOP/RESET button for about two seconds. _"lChange the incline Of the treadmill as desired. SPEED display--This display shows the speed of the walking belt, In miles per hour or kilomeSPEED ters per hour. The letters "MPH" dr'KPH" will appear to show which unit of measurement is selected. -.. I " &B 1 To change the incline of the treadmill, press the incline buttons. Each time one of the buttons is pressed, the Incline will change by 0.5%. The buttons can be held down to change the incline rapidly. To change the unit of measurement, hold down the STOP/RESET button while inserting the key DISTANCE LAPS into the console. An =E," for english miles, or an "M," for metric kilometers, will appear in the DISTANCE/LAPS display. Press the SPEED Z_button to change the unit of measurement. then reinsert the key. Note: In the incline display, the first indicator will light when the incline is set at 1.5%. The second indicator will light when the incline is set at 2% or 2.5%, the third indicator will light when the incline is set at 3% or 3.5%, and so forth. After the incline buttons are pressed, it will take a moment for the treadmill to reach the selected incline setting. B CALS/FAT CALS/ PULSE display--This display shows the approximate numbers of calories and fat calories you have burned (see FAT BURNING on page 14). Every seven seconds, the display will change from one number to the other, as shown by the arrows in the display. This display will also show your heart rate when the pulse sensor is used (see step 5). Follow your progress with the LED track and the four displays. The LED Track-The LED track represents a distance of 1/4 mile. As you exercise, the indicators around the j,/O09 0 0 0 0 0 O0_xL \Oo O) X ooooov Remove and B Measure your pulse; if desired. Stand on the foot rails and Pulse Sensor track will light one at a time until you have completed 1/4 mile. A new lap will then begin. place your thumb on the pulse sensor as shown. The DISTANCE/LAPS pulse sensor is pressureactivated--fully press it down. PULSE ! Do not press too hard, or the CALS. FAT CALS. circulation in your thumb will be restricted, and your pulse will not be detected. Next, raise your thumb slightly until the' •heart-shaped indicator in the CALSiFAT CALS/ PULSE display flashes steadily and a =P" appears in the display. Hold your thumb at this level. After a few seconds, three dashes will appear in the display and your heart rate will be shown. Hold your thumb on the sensor for another 15 seconds for the most accurate reading. display--This display shows the distance that you have walked or run DISTANCE LAPS and the number of laps you have completed (one lap equals 1/4 mile). The display will alternate between one number and the other every seven seconds, as shown by the arrows in the display. TIME/PACE display-This display shows the elapsed time and your current pace (pace is meaTIME PACE sured in minutes per mile). Your pace will be shown for a few seconds each time the speed is adjusted. -7[; 122 9 Ifthedisplayedh_eart rateappearsto betoo high ortoo10w,orif yourheartrateis not displayed, lift THE INFORMATION your thumb off the sensor and allow the display to reset. Press down again on the sensor as described above. Make sure that your thumb is positioned as shown, and that you are applying the proper amount of pressure to the pulse sensor. To access the informationreedS, hold down the STOP/ RESET button while inserting the key into the console. Try the sensor several times until you become familiar with iL Remember to stand still while measuring your pulse. r_ When you are finished, remove the key. S e° °te F t and remove the key from the console. Keep the key in a secure place. In addition,movethe on/offswitchto the off position.(See the drawingnear the bottomof page 8.) MODE An "E," for english miles, or an "M," for metric kilometers, will appear in the DISTANCE/ LAPS display. Press the SPEED Z_button to change the unit of measurement. The TIME/PACE display will show the total number of hours the treadmill has been used. IE _ DISTANCE 1 LAPS_ Il ,, 11 TIME PACE The SPEED display will show the total number of miles that the walking belt has moved. To exit the information mode, remove the key from the console. iO HOW TO FOLD AND MOVETHE HOW TO FOLD THE TREADMILL TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be permanently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) in order to raise, lower, or move the treadmill. 1. Hold the treadmill with your hands in the locations shown at the dght. CAUTION: To decrease the possibility of injury, bend your legs and keep your back straight. As you raise the treadmill, make sure to lift with your legs rather than your back. Raise the treadmill about halfway to the vertical position. 2. Move your right hand to the position shown and hold the treadmill firmly. Using your left thumb, slide the storage latch to the left and hold it. Raise the treadmill until the storage latch closes over the catch. Make sure that the storage latch is fully closed over the latch catch. To protect the floor or carpet from damage, place a mat under the treadmill. Keep the treadmill out of direct sunlight. Do not leave the treadmill in the storage position in temperatures above 85" Fahrenheit. ROW TO MOVE THE TREADMILL 3 Before moving the treadmill, convert the treadmill to the storage position as described above. Make sure that the storage latch is closed fully over the catch. ,Book Holder 1. Hold the handrails as shown and place one foot against a wheel. Do not hold or push on the book holder or the book holder may be damaged. 2. Tilt the treadmill back until it mils freely on the front wheels. Carefully move the treadmill to the desired location. Never move the treadmill without tipping it back. To reduce the risk of Injury, use extreme caution while moving the treadmill. Do not attempt to move the treadmill over an uneven surface. 3. Place one foot on the base, and carefullylower the treadmill until it is resting in the storage position. HOW TO LOWER THE TREADMILL - Front Wheels FOR USE 1. Refer to drawing 2 above. Hold the upper end of the treadmill with your dght hand as shown. Using your left thumb, slide the storage latch to the left and hold it. Pivot the treadmill down until the frame is past the storage latch. 2. Refer to drawing 1 above. Hold the treadmill firmly with both hands, and lower the treadmill to the floor. CAUTION: To decrease the possibility of injury, bend your legs and keep your back straight. 11 TROUBLE-SHOOTING Most treadmill problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, call our toll-free HELPLINE at 1-800-736-6879, Monday through Saturday, 7 a.m. until 7 p.m. Central Time (excluding holidays). PROBLEM: The power does not turn on SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor is plugged into a properly grounded outlet (see page 7). Use only a single-outlet surge suppressor that is UL 1449 listed as a transient voltage surge suppressor (TVSS). The surge suppressor must have a UL suppressed voltage rating of 400 volts or less and a minimum surge dissipation of 450 joules. The surge suppressor must be electrically rated for 120 volts AC and 15 amps. b. After the power cord has been plugged in, make sure that the key is fully inserted into the console. See step 1 on page 8. c. Check the circuit breaker located on the treadmill near the power cord. If the switch protrudes as shown, the circuit breaker has tripped. To reset the cimuit breaker, wait for five minutes and then press • the switch back in. d. Check the on/off switch located on the treadmill nearthe power cord. The switch must be in the On position. c d On Position PROBLEM: The power turns off during use SOLUTION: a. Check the cimuit breaker located on the treadmill frame near the power cord (see 1. c. above). If the circuit breaker has tripped, wait for five minutes and then press the switch back in. b. Make sure that the power cord is plugged in. c. Remove the key from the console. Reinsert the key fully into the console. See step 1 on page 8. d. Make sure that the on/off switch is in the on position. e. If the treadmill still will not run, please call our toll-frae HELPLINE. PROBLEM: The displays of the console do not function properly SOLUTION: a. Remove the key from the console and uplug the power cord. Remove the screws from the hood. Carefully remove the hood. Locate the Reed switch (21) and the Magnet (43) on the left side of the Pulley (42). Turn the Pulley until the Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and the Reed Switch is about 118". If necessary, loosen the Reed Switch Screw (76) and move the Reed Switch slightly. Retighten the Screw. Re-attach the hood, and run the treadmill for a few minutes to check for a correct speed reading. 17. I PROBLEM: The walking belt slows when walked on SOLUTION: a. Use only a UL-listed surge protector, rated at 15 stops, with a 14-gauge cord of five feet or less in length. b. If the walking belt is ovedightened, treadmill performance may decrease and the walking belt may be permanently damaged. Remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller adjustment bolts counterclockwise, 114 of a turn. When the walking belt is properly tightened, you should be able to lift each side of the walking belt 3 to 4 inches off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is propedy tightened. c. If the walking belt still slows when walked on, please call our toll-free HELPLINE. PROBLEM: The walking belt is off-center when walked on SOLUTION: a. If the walking belt has shifted to the left, first remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn the left rear roller adjustment bolt clockwise, and the right bolt counterclockwise, 1/4 of a turn each. Be careful not to overtighten the walking belt. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is centered. a b. If the walking belt has shifted to the dght, first remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn the left rear roller adjustment bolt counterclockwise, and the dght bolt clockwise, 1/4 of a turn each. Be careful not to overtighten the walking belt. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is centered. PROBLEM: The walking belt slips when walked on SOLUTION: a. If the walking belt slips when walked on, first remove the key and UNPLUG THE POWER CORD. Using the allen wrench, tum both rear miler adjustment bolts clockwise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able to lift each side of the walking belt 3 to 4 inches off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, insert the key and careftJIly walk on the treadmill for a few minutes. Repeat until the walking belt is properly tightened. a 13 CONDITIONING GUIDELINES uses easily accessible carbohydrate calories for energy. Only after the first few minutes does your body begin to use stored fat calories for energy. If your goal is to bum fat, adjust the speed and incline of the treadmill until your heart rate is near the lowest number in your training zone. For maximum fat burning, adjust the speed and incline of the treadmill until your heart rate is near the middle number in youftraining zone. Aerobic Exercise The following guidelines will help you to plan your exemise program: Remember--these are general guidelines only. For more detailed exemise information, obtain a reputable book or consult your physician. EXERCISE INTENSITY Whether your goal is to bum fat otto strengthen your cardiovascular system, the key to achieving the desired results is to exemise with the proper intensity. The proper intensity level can be found by using your heart rate as a guide. The chart below shows recommended heart rates for fat buming and aerobic exercise. TRAINING /_e 20 ZONES 30 40 50 60 70 80 To find the proper heart rate for you, first find your age near the bottom of the chart (ages are rounded off to the nearest ten years). Next, find the three numbers above your age. The three numbers define your "training zone." The lower two numbers are recommended heart rates for fat burning; the higher number is the recommended heart rate for aerobic exercise. To measure your heart rate during exercise, use the pulse sensor on the console. If your heart rate is too high or too low, adjust the speed and incline of the treadmill. Fat Burning To burn fat effectively, you must exercise at a relatively low intensity level for a sustained period of time. During the first few minutes of exercise, your body if your goal is to strengthen your cardiovascular system, your exercise must be "aerobic." Aerobic exercise is activity that requires large amounts of oxygen for prolonged periods of time. This increases the demand on the heart to pump blood to the muscles, and on the lungs to oxygenate the blood. For aerobic exercise, adjust the speed and incline of the treadmill until your heart rate is near the highest number in your training zone. WORKOUT GUIDELINES Each workout should include the following three parts: A Warm-up--Start each workout with 5 to 10 minutes of stretching and light exemise. A proper warm-up increases your body temperature, heart rate and circulation in preparation for exercise. Training Zone Exercise--After warming up, increase the intensity of your exercise until your pulse is in your training zone for 20 to 60 minutes. (During the first few weeks of your exercise program, do not keep your pulse in your training zone for longer than 20 minutes.) Breathe regularly and deeply as you exeroise---never hold your breath. A Cool-down---Finish each workout with 5 to 10 minutes of stretching to cool down. This will increase the flexibility of your muscles and will help prevent post-exercise problems. Exercise Frequency To maintain or improve your condition, complete three workouts each week, with at least one day of rest between workouts. After a few months_you may complete up to five workouts each week if desired. The key to success is to make exercise a regular and enjoyable part of your everyday life. PART LIST--M0del KeyNo. Qty. 1 2 3 4* 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 1 1 4 1 2 1 1 1 1 2 1 1 1 1 8 14 4 2 2 2 1 1 1 1 1 1 1 1 1 1 1 2 2 1 1 5 2 4 4 1 2 1 1 6 4 4 17 1 2 1 1 1 2 1 1 2 1 2 No. 83i.298400 Descdptlon Motor Belt Pulley/plywheel/pan Motor Nut Motor/Pulley/Flywheel/Fan Incline Motor Bolt Incline Motor Spacer Incline Motor Stop Bracket Small Nut Star Washer Optic Switch Frame Small Bolt Incline Optic Disk Incline Motor NUt Screw Plastic Stand-Off Hood Bracket (short) Hood Bracket (long) Warning Decal Reed Switch Reed Switch Clip Motor/Controller Wire Controller Electronics Bracket Circuit Breaker Power Cord Power Cord Grommet On/Off Switch inlet Bracket Incline Leg Frame Pivot Bolt Frame Pivot Spacer Updght Wire Harness Front Roller Adj. Bolt Roller Adj. Washer Motor Tension NutJFront Roller Nut Motor Bolt Cap Screw Left Foot Rail Cap Foot Rail Front Roller/Pulley Magnet Platform Screw Isolator Isolator Screw Belly Pan Fastener Shield Belt Guide Console Cover Front Belly Pan Power Supply Cable Tie Clamp Cable Tie Walking Belt Roller Guard Rear Roller Rear Isolator 'KeyNo. Qty, • . R0299B Descdptlon 59 2 Rear Font Rear Foot Screw 60 2 61 1 Ground Wire Ground Wire Screw 62 1 63 1 Belly Pan 64 1 Rear Endcap 65 2 Rear Roller Adj. Bolt 66 1 Motor 67 1 Latch Decal 68 2 Rear Platform Screw Catch Screw 69 2 70 1 Latch Catch 71 1 Walking Platform 8" cable "Re 72 5 73 4 4" cable Tie 74 1 Motor Tension Bolt 75 2 Foot Rail Insert 76 12 Reed Switch Screw/Belly Pan Screw 77 1 Storage Latch Handrail Bolt 78 4 79 4 Long Screw 80 2 Endcap Spacer 81 4 Motor Star Washer 82 1 Updght 83 2 Incline Leg Pivot Bolt 84 2 Incline Leg Pivot Washer 85 2 Handrail 86 2 Wheel Bolt 87 t Console Base 88 1 Console 3/4" Screw 89 11 90 1 Key/Clip Incline Motor Plate 91 1 92 1 Right Foot Rail Cap Book Holder 93 1 Motor Hood 94 1 95 2 Front Wheel 96 1 Incline Motor Shield Base Pad 97 4 Base Pad Screw 98 4 99 1 Updght Grommet Allen Wrench 100 1 Short Screw 101 8 102 1 Upright Hole Plug 103 2 Extension Leg 104 2 Extension Leg Cap 105 1 Shock 106 ", 1 Choke # 1 8" Blue Wire, 2 Female # 1 •4" Blue Wire. 2 Female # 1 8" White wire, 2 Female 4" White wire, Male/Female # 1 9" Wire Harness # 1 # 1 •4" Black Wire Harness, 2 Female # 1 4" Green Wire, F/Ring # 1 User's Manual * Includes all parts shown in the box # These parts are not illustrated 15 1 EXPLODED DRAWING--Model " No. 831.298400 RO299B ( 41 23 32 75 45 4. 41 71 45 55 1 46 76 57 56 47 496_ _ 76 REMOVE THIS EXPLODED DRAWING FROM THE USER'S MANUAL. SAVE THE EXPLODED DRAWING FOR FUTURE REFERENCE. 65 ._ 65 63 64 I To identify the parts shown on this exploded drawing, refer to the PART LIST on page 15 of the USER'S MANUAL. 36 61 i 0 EXPLODED DRAWING--Model No. 831.298400 RO299B 88 87 9O I 77 50 .,. 89 91 i 16 o o 2O _'-101 16 1_ o°°'°'° 94 lOO 16 SFJU S The model number and serial number of your PROFORM" 535LE treadmill are listed on a decal attached to the frame. See the front cover of this manual to find the location of the decal. Model No. 831.298400 QUESTIONS? All replacement pads are available for immediate purchase or special order when you visit your nearest SEARS Service Center. To request service or to order pads by telephone, call the toll-free numbers listed at the left. " ff you find that: • you need help assembling or operating the PROFORM 536LE treadmill • a part is missing When requesting help or service, or ordering pads, please be prepared to provide the following information: • The NAME OF THE PRODUCT (PROFORM e 535LE treadmill) • or you need to schedule repair service " call our toll-free HELPUNE • The MODEL NUMBER OF THE PRODUCT (831.298400) • The KEY NUMBER AND DESCRIPTION OF THE PART (see the EXPLODED DRAWING and PART LIST included in this manual) 1-800-736-6879 Monday-Saturday, 7 am-7 pm Central Time (excluding holidays) REPLACEMENT PARTS If parts become worn and need to be replaced, call the following toll-free number 1-800-FON-PART (1-800-366-7278) FULL 90 DAY WARRANTY For 90 days from the date of purchase, if failure occurs due to defect in matedal or workmanship in this SEARS TREADMILL EXERCISER, contact the nearest SEARS Service Center throughout the United States and SEARS will repair or replace the TREADMILL EXERCISER, free of charge. This warranty does not apply when the TREADMILL poses. ."" EXERCISER is used commercially or for rental pur- This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. SEARS, ROEBUCK Part No. 152337 JOOO58AC R0299B AND CO., DEPT. 817WA, HOFFMAN ESTATES, IL 60179 Printed in USA © 1999 Sears, Roebuck and Co.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 18 Page Layout : SinglePage Page Mode : UseNone Producer : Goby Monitor Application version 3, 2, 1, 4 Create Date : Mon Apr 02 11:43:06 2007 Author : Title : Subject :EXIF Metadata provided by EXIF.tools