Proform 285872 Rebel Recumbent Bike And Elliptical Crosstrainer Users Manual *285872 171781

Proform-831-285872-Users-Manual-657844 proform-831-285872-users-manual-657844

Proform-285872-Owner-S-Manual proform-285872-owner-s-manual

831.285872 product_support%5CProForm%5C285872 - PROFORM REBEL%5C28587.2-171781

831.285872 to the manual aad6e506-5f86-48d6-8607-5ed88df3ac43

2015-04-13

: Proform Proform-285872-Rebel-Recumbent-Bike-And-Elliptical-Crosstrainer-Users-Manual-697279 proform-285872-rebel-recumbent-bike-and-elliptical-crosstrainer-users-manual-697279 proform pdf

Open the PDF directly: View PDF .
Page Count: 16

Download
Open PDF In Browser	View PDF

Model No. 831.285872
Serial No.

USERÕS MANUAL

Write the serial number in the space
above for reference.

Serial
Number
Decal

Patent Pending

CAUTION
Read all precautions and instructions in this manual before using
this equipment. Save this manual
for future reference.

SEARS, ROEBUCK AND CO., HOFFMAN ESTATES, IL 60179

TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
PART IDENTIFICATION CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
HOW TO USE THE PROFORM¨ REBEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
FULL 90 DAY WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of serious injury, read the following important precautions before using the PROFORM¨ REBEL Recumbent Cycle and Elliptical Crosstrainer.
shoes for foot protection.

1. Read all instructions in this manual before
using the REBEL.
2. It is the responsibility of the owner to
ensure that all users of the REBEL are adequately informed of all precautions.

8. Always hold the handlebars when mounting,
dismounting and using the REBEL. Step
onto and off the pedal that is in the lowest
position when mounting and dismounting.

3. Place the REBEL on a level surface, with a
mat beneath it to protect the floor or
carpet. Keep the REBEL indoors, away from
moisture and dust.

9. When you stop exercising, allow the pedals
to slowly come to a stop. The REBEL does
not freewheel; the pedals will continue to
move until the flywheel stops.

4. Inspect and tighten all parts regularly.
Replace any worn parts immediately.

10. Keep your back straight when using the
REBEL. Do not arch your back.

5. Keep children under the age of 12 and pets
away from the REBEL at all times.

11. If you feel pain or dizziness while exercising, stop immediately and begin cooling
down.

6. The REBEL should not be used by
persons weighing more than 250 pounds.

12. The REBEL is intended for in-home use
only. Do not use it in any commercial, rental,
or institutional setting.

7. Wear appropriate exercise clothing when
using the REBEL. Always wear athletic

WARNING:

Before beginning this or any exercise program, consult your physician.
This is especially important for persons over the age of 35 or persons with pre-existing health
problems. Read all instructions before using. ICON assumes no responsibility for personal injury
or property damage sustained by or through the use of this product.

PROFORM is a registered trademark of ICON Health & Fitness, Inc.

BEFORE YOU BEGIN
Congratulations for selecting the revolutionary PROFORM¨ REBEL Recumbent Bike and Elliptical
Crosstrainer. The REBEL is an incredibly smooth
exerciser that moves your feet in a natural elliptical
path, minimizing the impact on your knees and ankles.
And the unique REBEL can easily be converted from
an elliptical crosstrainer to a recumbent bike, giving you
two machines in one. Welcome to a whole new world
of natural, elliptical-motion exercise from PROFORM.

please call our toll-free HELPLINE at 1-800-736-6879,
Monday through Saturday, 7 a.m. until 7 p.m. Central
Time (excluding holidays). To help us assist you,
please note the product model number and serial
number before calling. The model number is
831.285872. The serial number can be found on a
decal attached to the REBEL (see the front cover of
this manual).
Before reading further, please look at the drawing
below and familiarize yourself with the parts that are
labeled.

For your benefit, read this manual carefully before
you use the REBEL. If you have additional questions,

Console
Book Holder
and Seat
Handlebar
FRONT
Backrest
Lock Knob
(on back)

Upright

Resistance Knob

Side Shield
Base

Pedal
BACK

Toe Pedal

Pedal Leg

RIGHT SIDE

PART IDENTIFICATION CHART
Use the chart below to identify the small parts used in
assembly. The number in parenthesis below each part
is the key number of the part, from the PART LIST on
page 14. The number after the dash indicates the

quantity needed for assembly. Note: Some small
parts may have been pre-attached for shipping. If
a part is not in the parts bag, check to see if it has
been pre-attached.

M10 Nylon Locknut (54)Ñ6
1/2" Nylon Locknut (9)Ñ2
M10 Washer (71)Ñ6

Metal Handlebar Spacer (83)Ð2

M16 Flat Washer (84)Ñ2

Pedal Arm Spacer (42)Ñ2

Plastic Sleeve (53)Ñ2

Pedal Bolt (8)Ñ2

M4 x 38mm Screw (4)Ñ2
M10 x 68mm Bolt (67)Ð4

M4 x 16mm Tapping Screw (30)Ñ8
M10 x 75mm Bolt (66)Ð2

M6 x 16mm Seat Screw (28)Ð8
Console Mount Screw (69)Ð1
Handlebar Screw (51)Ð4

M10 x 25mm Button Head Bolt (85)Ð2

ASSEMBLY
Assembly requires two persons. Place all parts of the PROFORM¨ REBEL in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires a phillips screwdriver
, two adjustable wrenches
rubber mallet
(none of these is included).
1. Hold the Stabilizer (68) against the saddle on the rear
of the Base (1). Attach the Stabilizer with two M10 x
75mm Bolts (66) and two M10 Nylon Locknuts (54).

and a

54
68

66
2. Slide the ÒUÓ-channel on the Rail Stabilizer (37) into
the Base (1). Make sure that the Reed Switch Wire
(48) is extending from the hole formed where the
two parts meet; be careful not to damage the Reed
Switch Wire.

2
37

ÒUÓ-channel

Insert two M10 x 68mm Bolts (67) with two M10
Washers (71) up through the Base (1) and the Rail
Stabilizer (37). Note: It may be easier to insert the
Bolts if the unit is tipped on its side.

Insert two M10 x 68mm Bolts (67) with two M10
Washers (71) up through the Rail Stabilizer (37).
67
3. While one person holds the Upright (2), connect the
Extension Wire (49) to the Reed Switch Wire (48)
extending from the Base (1). Insert any excess wire
into the Upright or the Base.

54
54

Slide the Upright (2) onto the four M10 x 68mm Bolts
(67). Make sure that the wires do not get pinched
as you slide the Upright into place.

2
49

Hand tighten an M10 Nylon Locknut (54) onto each
M10 x 68mm Bolt (67). Tip the unit on its side and use
two spanners to tighten the Nylon Locknuts fully.

4. Connect the Seat Bar Wire (88) to the Handlebar Wire
(87).

4
7

Slide the Handlebar (7) onto the Seat Bar (6). Attach
the Handlebar with the four Handlebar Screws (51).
Make sure that the Handlebar Screws do not damage
the wires.
Pull both Grips (72) towards the Handlebar (7) until
they cover the Handlebar Screws (51).

72
51

88
6

51
72
5. Remove the Console Mount Screw (69) and slide the
Detent Ring (73) off the shaft of the Console (5).

69
Console
Wire

Insert the console wire through the indicated hole in
the Seat Bar (6).

6
88

Using the included grease pack, lubricate the shaft of
the Console (5). Insert the shaft into the indicated hole
in the Seat Bar (6).
Slide the Detent Ring (73) onto the console shaft and
line up the hole in the Detent Ring with the hole in the
shaft. Secure the Console (5) with the Console Mount
Screw (69) (see the inset drawing).

Lubricate

Plug the console wire into the Seat Bar Wire (16).

6. Attach the Seat (43) to the indicated brackets on the
Seat Bar (6) with four M6 x 16mm Seat Screws (28).

Attach the Seat Cover (35) to the Seat (43), using two
M4 x 38mm Screws (4) along the rear edge and an M4
x 16mm Tapping Screw (30) on each side.

6
28
4
28
30

4
30

7. Note: The assistance of another person is recommended for this step.

7
7

While another person holds the Handlebar (7) in the
position shown, connect the Handlebar Wire (87) to
the Extension Wire (49) extending from the Upright (2).

Bracket

83
53

Next, slide a Plastic Sleeve (53) onto each of the indicated shafts on the Upright (2).
49
Slide an M10 Washer (71) onto each of the M10 x
25mm Button Head Bolts (85). Next, insert the Bolts
through the brackets on the Handlebar (7) and then
slide an M16 Flat Washer (84) and a Metal Handlebar
Spacer (83) onto each Bolt. Insert the Bolts into the
shafts on the Upright (2) and tighten them with the
included allen wrench. Be careful not to overtighten
the Bolts; the Handlebar must pivot easily.

85
71

84
2

84
85

Shaft

71
8

8. Attach the Backrest (40) to the indicated brackets on
the Upright (2) with four M6 x 16mm Seat Screws (28).

40
28
2

9. Identify the Left Pedal Leg (3) by looking at the
Lock Pin (90) on the pre-assembled Toe Pedal (36).
The Lock Pin must be on the outside when the
Pedal Leg is mounted.

Attach a Pedal (29) to the Left Pedal Leg (3) with three
M4 x 16mm Tapping Screws (30).
Lubricate a Pedal Bolt (8) with the included grease
pack and slide it through the two pre-assembled
Bushings (39). Slide a Plastic Pedal Spacer (42) onto
the Pedal Bolt (8) and slide the Bolt into the hole in the
left Crank Arm (10). Tighten a 1/2Ó Nylon Locknut (9)
onto the Pedal Bolt (8).
Repeat this procedure for the Right Pedal Leg (70, not
shown).

36
29
30

90
39

42
10

Lubricate

10.The Console (5) requires two ÒAAÓ batteries (not
included). Alkaline batteries are recommended.

To install batteries, first slide up the battery cover and
carefully remove the battery clip from the Console (5).
Insert two batteries into the battery clip as shown.
Make sure that the negative ends of the batteries
(marked ÒÐÓ) are touching the springs in the battery clip. Replace the battery clip and close the battery cover.

Battery
Cover

Battery
Clip

11. Make sure that all parts of the REBEL are properly tightened. To protect the floor or carpet from damage,
place a mat under the REBEL.

HOW TO USE THE PROFORM¨ REBEL
HOW TO SWITCH BETWEEN RECUMBENT BIKE
AND ELLIPTICAL CROSSTRAINER

To switch from elliptical crosstrainer to recumbent
bike, loosen the Lock Knob (81, not visible). Fold the
Seat (43) down and turn the Console (5) so it is visible when you are sitting on the Seat.

To switch from recumbent bike to elliptical crosstrainer, lift the Seat (43) as far as it will go. Tighten the
Lock Knob (81, not visible) into the Upright (2). Note:
Tighten the Lock Knob fully. Push the Console (5)
in to disengage the lock, and then turn it so the display is visible when you are standing on the pedals.

HOW TO EXERCISE ON THE REBEL WHEN IT IS
SET UP AS AN ELLIPTICAL CROSSTRAINER
To mount the REBEL in the crosstrainer mode, hold
the handlebars and step onto the pedal that is in the
lowest position. Next, step onto the other pedal. Push
the pedals until they begin to move with a continuous
motion. Note: The crank can turn in either direction. To get the full impact of the elliptical motion,
it is recommended that you turn the crank in the
direction shown by the arrow below; however, to
give variety to your exercise, you may choose to
turn the crank in the opposite direction.

Lock Knob

Pedal

43
2

Crank

To dismount the REBEL, allow the pedals to slowly
come to a stop. Important: The REBEL does not
have a freewheel; the pedals will continue to
move until the flywheel stops. When the pedals are
stationary, step off the highest pedal first. Then, step
off the lowest pedal.

Display

HOW TO ADJUST THE TOE PEDALS
To adjust the Right Toe Pedal (89), pull out the Lock
Pin (90). Slide the Toe Pedal forwards or backwards
to the desired position. Push the Lock Pin through the
holes in the Toe Pedal and the adjustment holes in
the Pedal Leg (70). Adjust the Left Pedal (36, not
shown) in the same manner.

SpeedÑThis mode displays your pedaling speed, in
miles per hour.
TimeÑThis mode displays the elapsed time. Note:
When you stop exercising, the time mode will pause.
DistanceÑThis mode displays the total distance you
have pedaled, in miles.
Fat CalorieÑThis mode displays the approximate
number of fat calories you have burned (see BURNING FAT on page 12).

CalorieÑThis mode displays the approximate number
of Calories you have burned.

89
90

ScanÑThis mode displays the speed, time, distance,
fat calorie, and calorie modes, for 5 seconds each, in
a repeating cycle.

HOW TO ADJUST THE RESISTANCE OF THE
PEDALS
As you exercise,
you can adjust the
resistance of the
pedals with the
resistance knob.
To increase the
resistance, turn the
knob clockwise; to
decrease the resistance, turn the
knob counterclockwise.

HOW TO OPERATE THE CONSOLE
If there is a thin sheet of clear plastic on the face of
the console, remove it.

Resistance Knob

1. To turn on the power, press the on/reset button or
simply begin pedaling. When the power is turned
on, the entire display will appear for two seconds.
The console will then be ready for operation.
2. Select one of the modes:
Scan modeÑWhen
the power is turned
on, the scan mode
will automatically be
selected. One mode
indicator will show
Mode Indicators
that the scan mode
is selected, and a
flashing mode indicator will show which mode is
currently displayed. Note: If a different mode is
selected, you can select the scan mode again by
repeatedly pressing the mode button.

DESCRIPTION OF THE CONSOLE
The console is designed to help you get the most
from your workouts. As you exercise, you can watch
your progress as the display provides continuous
exercise feedback. The modes of the display are
described at the right. Note: Before the console can
be operated, two ÒAAÓ batteries must be installed
(see assembly step 10 on page 8).

Speed, time, distance, fat calorie or calorie
modeÑTo select one of these modes for continuous display, press the mode button repeatedly. The
mode indicators will show which mode is selected.
(Make sure that the scan mode is not selected.)

4. The console has an Òauto-offÓ feature. If the
pedals are not moved and the console buttons
are not pressed for four minutes, the power will
turn off automatically to conserve the batteries.

3. To reset the display, press the on/reset button.

MAINTENANCE
unscrew the three M4 x 38mm Screws (4) from the
lower edge of the Right Side Shield. Remove the 1/2Ó
Nylon Locknut (9), Pedal Bolt (8) and Plastic pedal
Spacer (42) from the Right Pedal Leg (70, not shown).
Gently pull the Right Side Shield over the Crank Arm.

CONSOLE TROUBLE-SHOOTING
If the console does not function properly, the batteries
should be replaced. To replace the batteries, see
assembly step 10 on page 8. In addition, make sure
that the console wire is connected to the seat bar
wire. See assembly step 5 on page 6.

HOW TO REMOVE THE SIDE SHIELDS
For all of the following steps, one or both Side
Shields (11 and 27) must be removed.

4
42

To remove the Left Side Shield (11), unscrew the 1/2Ó
Nylon Locknut (9) and remove the Pedal Bolt (8) and
the Plastic Pedal Spacer (42) from the Left Pedal Leg
(3). Unscrew the seven M4 x 38mm Screws (4) from
the Left Side Shield. Gently pull the Left Side Shield
out and to the side, so the Crank Arm (10) fits
through the hole in the Side Shield.

10
8
4

To remove the Right Side Shield (27), first remove the
Left Side Shield (11) as described above. Then

HOW TO ADJUST THE REED SWITCH

HOW TO ADJUST THE DRIVE BELT

If the console does not display correct feedback, the
reed switch should be adjusted. To adjust the reed
switch, the Left Side Shield (11, not shown) must first
be removed as described on page 10.

If the Drive Belt (32) slips as you exercise, the Drive
Belt should be adjusted. To adjust the Drive Belt, both
Side Shields (11 and 27, not shown) must first be
removed as described on page 10.

Next, locate the
Reed Switch
(48). Turn the
Pulley (19) until
55
the Magnet (55)
is aligned with
51
the Reed Switch.
48
Loosen, but do
19
not remove, the
M4 x 12mm
Screw (51,
shown removed
for clarity). Slide the Reed Switch slightly toward or
away from the Magnet. Make sure that the Magnet will
not hit the Reed Switch. Retighten the Screw. Turn the
Pulley (19) for a moment. Repeat until the console displays correct feedback. When the Reed Switch is correctly adjusted, re-attach the left side shield.

Next, loosen the
20
two M8 Flange
32
Nuts (23) (there
26
is one on each
side of the
Flywheel [20]).
To tighten the
Drive Belt (32),
23
turn the two M6
Nuts (26) clockwise; to loosen
the Drive Belt,
turn the M6 Nuts
counterclockwise. Make sure that the Flywheel is
straight and retighten the M8 Flange Nuts (23). When
the Drive Belt is properly adjusted, re-attach the side
shields.
HOW TO TIGHTEN THE CRANK

HOW TO ADJUST THE RESISTANCE STRAP
If the Crank Arms (10) become loose, they should be
tightened in order to prevent excessive wear. To tighten the Crank Arms, the Left Side Shield (11, not
shown) must first be removed as described on page 10.

If the pedals do
not have enough
20
resistance, even
74
when the resistance knob is
turned to the maximum setting, the
31
Resistance Strap
(31) may need to
be adjusted. To
adjust the
Resistance Strap,
the Left Side
Shield (11, not shown) must first be removed, as
described on page 10.

Next, loosen the
Crank Nut (17)
on the left
Crank Arm (10).
15
Place the end
of a standard
screwdriver in
10
one of the slots
in the Slotted
17
Crank Nut (15).
Lightly tap the
screwdriver with
a hammer to
turn the Slotted Crank Nut counterclockwise until the
arms are no longer loose. Do not overtighten the
Slotted Crank Nut. When the Slotted Crank Nut is
properly tightened, retighten the Crank Nut and reattach the left side shield.

Turn the resistance knob to the lowest setting (see
HOW TO ADJUST THE RESISTANCE OF THE
PEDALS on page 9). Open the Buckle (74) and pull
the end of the Resistance Strap (31) slightly downward. Close the Buckle and turn the Flywheel (20) to
make sure that there is not too much resistance.
When the Resistance Strap is properly adjusted, reattach the left side shield.

CONDITIONING GUIDELINES
Burning Fat

WARNING

To burn fat effectively, you must exercise at the proper
intensity level for a sustained period of time. During
the first few minutes of exercise, your body uses easily accessible carbohydrate calories for energy. Only
after the first few minutes does your body begin to use
stored fat calories for energy. If your goal is to burn
fat, keep your heart rate in the lower end of your training zone.

Before beginning any exercise program, consult your physician. This is especially important for individuals over the age of 35 or individuals with pre-existing health problems.

WHY EXERCISE?

Aerobic Exercise

Exercise has proven essential for good health and
well-being. Participation in a well-rounded exercise
program helps to develop a stronger and more efficient heart, improved respiratory function, increased
stamina, better weight management, increased ability
to handle stress, and greater self-esteem.

If your goal is to strengthen your cardiovascular system, your exercise must be Òaerobic.Ó Aerobic exercise
is activity that requires large amounts of oxygen for
prolonged periods of time. This increases the demand
on the heart to pump blood to the muscles, and on the
lungs to oxygenate the blood. For effective aerobic
exercise, keep your heart rate in the higher end of
your training zone.

EXERCISE INTENSITY
Whether your goal is to burn fat or to strengthen your
cardiovascular system, the key to achieving the
desired results is to exercise with the proper intensity.
The proper intensity level can be found by using your
heart rate as a guide. For effective exercise, your heart
rate should be maintained at a level between 70% and
85% of your maximum heart rate as you exercise. This
is known as your training zone. You can find your training zone in the table below. Training zones are listed
according to age and physical condition.

HOW TO MEASURE YOUR HEART RATE
To measure your
heart rate, place
two fingers on your
wrist as shown.
Stop exercising and
take a six-second
heartbeat count.
Multiply the result
by ten to find your
heart rate. (A six-second count is used because your
heart rate drops quickly when you stop exercising.) If
your heart rate is too high, decrease the intensity of
your exercise. If your heart rate is too low, increase
the intensity of your exercise.

TRAINING ZONE (BEATS/MIN.)
AGE

UNCONDITIONED CONDITIONED

138Ð167

133Ð162

136Ð166

132Ð160

135Ð164

130Ð158

134Ð162

129Ð156

132Ð161

127Ð155

131Ð159

125Ð153

129Ð156

124Ð150

127Ð155

122Ð149

126Ð153

121Ð147

125Ð151

119Ð145

123Ð150

118Ð144

122Ð147

117Ð142

120Ð146

115Ð140

118Ð144

114Ð139

WORKOUT GUIDELINES
A proper workout includes the following parts:
A warm-up, consisting of 5 to 10 minutes of stretching
and light exercise. A proper warm-up increases the
body temperature, heart rate, and circulation in preparation for exercise.
A cardiovascular exercise period, including 20 to
30 minutes of exercise with your heart rate in your
training zone.
A cool-down, with 5 to 10 minutes of stretching.
Thorough stretching helps to offset problems caused
when you stop exercising suddenly. Stretching after
exercise is also very effective for increasing flexibility.

EXERCISE FREQUENCY
To maintain or improve your condition, plan three
workouts each week, with at least one day of rest
between workouts. After a few months of regular

exercise, you may complete up to five workouts each
week, if desired. Find the best time of day for your
workouts, and then stick with it.

SUGGESTED STRETCHES
1

The correct form for several basic stretches is shown at the
right. Move slowly as you stretchÑnever bounce.
1. Toe Touch Stretch
Stand with your knees bent slightly and slowly bend forward
from your hips. Allow your back and shoulders to relax as you
reach down toward your toes as far as possible. Hold for 15
counts, then relax. Repeat 3 times. Stretches: Hamstrings,
back of knees and back.

2. Hamstring Stretch
Sit with one leg extended. Bring the sole of the opposite foot
toward you and rest it against the inner thigh of your extended
leg. Reach toward your toes as far as possible. Hold for 15
counts, then relax. Repeat 3 times for each leg. Stretches:
Hamstrings, lower back and groin.
3

3. Calf/Achilles Stretch
With one leg in front of the other, reach forward and place
your hands against a wall. Keep your back leg straight and
your back foot flat on the floor. Bend your front leg, lean forward and move your hips toward the wall. Hold for 15 counts,
then relax. Repeat 3 times for each leg. To cause further
stretching of the achilles tendons, bend your back leg as well.
Stretches: Calves, achilles tendons and ankles.

4. Quadriceps Stretch
With one hand against a wall for balance, reach back and
grasp one foot with your other hand. Bring your heel as close
to your buttocks as possible. Hold for 15 counts, then relax.
Repeat 3 times for each leg. Stretches: Quadriceps and hip
muscles.
5. Inner Thigh Stretch
Sit with the soles of your feet together and your knees outward. Pull your feet toward your groin area as far as possible.
Hold for 15 counts, then relax. Repeat 3 times. Stretches:
Quadriceps and hip muscles.

PART LISTÑMODEL No. 831.285872
Key No. Qty.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47

1
1
1
12
1
1
1
2
2
2
1
2
2
1
1
1
2
2
1
1
1
3
2
2
2
2
1
8
2
9
1
1
1
1
1
1
1
2
4
1
1
2
1
2
1
1
4

Description

Key No. Qty.

Base
Upright
Left Pedal Leg
M4 x 38mm Screw
Console
Seat Bar
Handlebar
Pedal Bolt
1/2Ó Nylon Locknut
Crank Arm
Left Side Shield
Crank Bearing
Bearing Cup
Keyed Washer
Slotted Crank Nut
Tri-notch Crank Nut
Crank Nut
5/16Ó x 3/4Ó Tap Screw
Pulley
Flywheel w/Hub
Flywheel Axle
M10 Flat Washer
M10 Nut
M6 Eyebolt
Adjustment Bracket
M6 Nut
Right Side Shield
M6 x 16mm Seat Screw
Pedal
M4 x 16mm Tapping Screw
Resistance Strap
Drive Belt
Resistance Cable w/Spring
Resistance Knob
Seat Cover
Left Toe Pedal
Rail Stabilizer
Rail Endcap
Bushing
Backrest
Small Spring
Plastic Pedal Spacer
Seat
1 1/2Ó x 2 1/2Ó Inner Cap
Console Axle
Console Spring
Stabilizer Endcap

48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
#
#

1
1
1
4
1
2
6
1
1
4
1
1
2
2
2
1
1
2
2
4
1
3
1
6
2
1
1
2
4
4
4
2
2
1
1
2
2
2
1
1
1
1
2
2
1
1

R1100A
Description
Reed Switch/Sensor Wire
Extension Wire
Reed Switch Clip
Handlebar Screw
M4 x 16mm Flat Head Screw
Plastic Sleeve
M10 Nylon Locknut
Magnet
Clamp Bolt
1/4Ó Flat Washer
1/4Ó Nylon Locknut
Resistance Strap Hook
Console Washer
Flywheel Bearing
Crank Cover
Seat Cap
Bearing Washer
Crank Washer
M10 x 75mm Bolt
M10 x 68mm Bolt
Stabilizer
Console Mount Screw
Right Pedal Leg
M10 Washer
Grip
Detent Ring
Buckle
M8 x 57mm Bolt
M8 Washer
Metal Wheel Spacer
Wheel Bearing
Pedal Wheel
M8 Nylon Locknut
Lock Knob
Upright Cap
Metal Handlebar Spacer
M16 Flat Washer
M10 x 25mm Button Head Bolt
Allen Wrench
Handlebar Wire
Seat Bar Wire
Right Toe Pedal
Lock Pin
Plastic Washer
Grease Pack
UserÕs Manual

Note: Ò#Ó indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover
of this manual for information about ordering replacement parts.

51 72

7 87

76 80

51
69

71
84

91 35
46
91
4
45
30

84 83
85
63

43 28

39
90

14
10

18 65

57
57
58
56
34 59
33
20
26 25
24

26 25

39 89

EXPLODED DRAWINGÑModel No. 831.285872
R1100A

ORDERING REPLACEMENT PARTS
The model number and serial number of your PROFORM¨
REBEL Recumbent Bike and Elliptical Crosstrainer are listed on
a decal attached to the frame. See the front cover of this manual
to find the location of the decal.
All replacement parts are available for immediate purchase or
special order when you visit your nearest SEARS Service Center.
To request service or to order parts by telephone, call the toll-free
numbers listed at the left.

QUESTIONS?
If you find that:
¥ you need help assembling or
operating the PROFORM¨
REBEL Recumbent Bike and
Elliptical Crosstrainer

When requesting help or service, or ordering parts, please be
prepared to provide the following information:
¥ The MODEL NUMBER of the product (831.285872).
¥ The NAME of the product (PROFORM¨ REBEL Recumbent
Bike and Elliptical Crosstrainer).

¥ a part is missing
¥ or you need to schedule repair
service

¥ The KEY NUMBER and DESCRIPTION of the PART (see
pages 14 and 15).

call our toll-free HELPLINE

1-800-736-6879
MondayÐSaturday, 7 amÐ7 pm
Central Time (excluding holidays)

REPLACEMENT
PARTS
If parts become worn and need to
be replaced, call the following tollfree number

1-800-FON-PART (366-7278)

FULL 90 DAY WARRANTY
For 90 days from the date of purchase, if failure occurs due to defect in material or workmanship in this
SEARS EXERCISER, contact the nearest SEARS Service Center throughout the United States and
SEARS will repair or replace the EXERCISER, free of charge.
This warranty does not apply when the EXERCISER is used commercially or for rental purposes.
This warranty gives you specific legal rights, and you may also have other rights which vary from state
to state.
SEARS, ROEBUCK AND CO., DEPT. 817WA, HOFFMAN ESTATES, IL 60179

Part No. 171781 R1100A

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 16
Create Date                     : 2000:12:08 11:09:43
Producer                        : Acrobat Distiller 3.02 for Power Macintosh
Author                          : Steve Slade
Creator                         : QuarkXPressª: PSPrinter 8.3.1
Title                           : *285872-171781

EXIF Metadata provided by EXIF.tools

Proform 285872 Rebel Recumbent Bike And Elliptical Crosstrainer Users Manual *285872 171781

Proform-831-285872-Users-Manual-657844 proform-831-285872-users-manual-657844

Proform-285872-Owner-S-Manual proform-285872-owner-s-manual

831.285872 product_support%5CProForm%5C285872 - PROFORM REBEL%5C28587.2-171781

831.285872 to the manual aad6e506-5f86-48d6-8607-5ed88df3ac43

Navigation menu

Versions of this User Manual:

Views

Navigation