Proform 297471 Crosstrainer Treadmill Users Manual

Proform-831-297471-Users-Manual-657850 proform-831-297471-users-manual-657850

Proform-297471-Owner-S-Manual proform-297471-owner-s-manual

831.297471 to the manual 1697faba-1513-455a-ba28-9da570a66939

: Proform Proform-297471-Crosstrainer-Treadmill-Users-Manual-697458 proform-297471-crosstrainer-treadmill-users-manual-697458 proform pdf

Open the PDF directly: View PDF .
Page Count: 22

USER'S MANUAL

Serial

Number

Decal

Model No. 831.297471

Serial No.

Write the serial number in the space

above for future reference.

SEARS, ROEBUCK AND CO., HOFFMAN ESTATES, IL 60179

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this manual

for future reference.

2

TABLE OF CONTENTS

FULL 90 DAY WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

HOW TO EXERCISE ON THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

HOW TO OPERATE THE WEIGHT BENCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

HOW TO EXERCISE ON THE WEIGHT BENCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

MAINTENANCE AND TROUBLE-SHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

HOW TO MOVE THE CROSSTRAINER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

Note: An EXPLODED DRAWING is attached to the center of this manual. Save the EXPLODED DRAWING for

future reference.

FULL 90 DAY WARRANTY

For 90 days from the date of purchase, if failure occurs due to defect in material or workmanship in this

SEARS TREADMILL EXERCISER, contact the nearest SEARS Service Center throughout the United

States and SEARS will repair or replace the TREADMILL EXERCISER, free of charge.

This warranty does not apply when the TREADMILL EXERCISER is used commercially or for rental pur-

poses.

This warranty gives you specific legal rights, and you may also have other rights which vary from state

to state.

SEARS, ROEBUCK AND CO., DEPT. 817WA, HOFFMAN ESTATES, IL 60179

3

1. It is the responsibility of the owner to

ensure that all users of the CROSSTRAINER

are adequately informed of all warnings and

precautions.

2. Use the CROSSTRAINER only as described

in this manual.

3. Place the CROSSTRAINER on a level

surface, with eight feet of clearance behind

it. Do not place the CROSSTRAINER on a

surface that blocks any air openings. To

protect the floor or carpet from damage,

place a mat under the CROSSTRAINER.

4. Keep the CROSSTRAINER indoors, away

from moisture and dust. Do not put the

CROSSTRAINER in a garage or covered

patio, or near water.

5. Do not operate the CROSSTRAINER where

aerosol products are used or where oxygen

is being administered.

6. Keep children under 12 and pets away from

the CROSSTRAINER at all times.

7. The CROSSTRAINER should be used only

by persons weighing 250 pounds or less.

8. The CROSSTRAINER should never be used

by more than one person at a time.

9. Wear appropriate exercise clothing when

using the CROSSTRAINER. Do not wear

loose clothing that could become caught in

the treadmill. Athletic support clothes are

recommended for both men and women.

10. Always wear athletic shoes when using the

CROSSTRAINER. Never use the CROSS-

TRAINER with bare feet, wearing only

stockings, or in sandals.

11. Inspect and tighten all parts of the CROSS-

TRAINER regularly.

12. When connecting the power cord (see page

8), plug the power cord into a surge

suppressor (not included) and plug the

surge suppressor into a grounded circuit

capable of carrying 15 or more amps. No

other appliance should be on the same

circuit. Do not use an extension cord.

13. Use only a single-outlet surge suppressor

that is UL 1449 listed as a transient voltage

surge suppressor (TVSS). The surge sup-

pressor must have a UL suppressed voltage

rating of 400 volts or less and a minimum

surge dissipation of 450 joules. The surge

suppressor must be electrically rated for

120 volts AC and 15 amps.

14. Keep the power cord away from heated

surfaces.

15. Never move the walking belt while the

power is turned off. Do not operate the

CROSSTRAINER if the power cord or plug is

damaged, or if the CROSSTRAINER is not

working properly. (See BEFORE YOU BEGIN

on page 5 if the CROSSTRAINER is not

working properly.)

16. Never start the treadmill while you are

standing on the walking belt. Always hold

the handrails while using the treadmill.

17. The CROSSTRAINER is capable of high

speeds. Adjust the speed in small incre-

ments to avoid sudden jumps in speed.

18. To reduce the possibility of the treadmill

overheating, do not operate the treadmill

continuously for longer than one hour.

19. Never leave the treadmill unattended while it

is running. Always remove the key when the

treadmill is not in use.

20. Do not attempt to raise, lower, or move the

CROSSTRAINER until it is properly assem-

bled.

21. You must be able to safely lift 45 pounds (20

kg) in order to raise, lower, or move the

CROSSTRAINER.

WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the

following important precautions and information before operating the PROFORM®CROSSTRAINER.

IMPORTANT PRECAUTIONS

4

22. The CROSSTRAINER includes three pairs of

hand weights. Other hand-held weights may

be used with the CROSSTRAINER; however,

do not put other weights on the weight rack,

or use weights weighing more than 20

pounds each.

23. Before moving the CROSSTRAINER, make

sure that the bench and treadmill are folded

to the storage position, and that the lock

pins are fully engaged (see HOW TO FOLD

THE TREADMILL TO THE STORAGE POSI-

TION on page 11, and HOW TO FOLD THE

BENCH TO THE STORAGE POSITION on

page 14).

24. Never insert any object into any opening.

25. Always unplug the power cord before per-

forming the maintenance and adjustment

procedures described in this manual. Never

remove the motor hood unless instructed to

do so by an authorized service representa-

tive. Servicing other than the procedures in

this manual should be performed only by an

authorized service representative.

26. The CROSSTRAINER is intended for in-home

use only. Do not use the CROSSTRAINER in

any commercial, rental, or institutional

setting.

WARNING: Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems.

Read all instructions before using. SEARS assumes no responsibility for personal injury or property

damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS

The decal shown below has been placed on the CROSSTRAINER. If the decal is missing, or if it is not

legible, please call our toll-free HELPLINE to order a free replacement decal (see the back cover of this

manual). Apply the decal in the location shown.

5

Congratulations for purchasing the revolutionary

PROFORM®CROSSTRAINER. The unique

CROSSTRAINER offers both aerobic exercise and

strength training exercise to help you achieve total

fitness in the convenience of your home. And when

you’re not exercising, the CROSSTRAINER can be

folded up, taking a fraction of the space needed for

both a treadmill and a bench.

For your benefit, read this manual before using the

CROSS-TRAINER. If you have other questions,

please call our toll-free HELPLINE at 1-800-736-6879,

Monday through Saturday, 7 a.m. until 7 p.m. Central

Time (excluding holidays). To help us assist you,

please note the product model number and serial num-

ber before calling. The product model number is

831.297471. The serial number can be found on a

decal attached to the CROSSTRAINER (see the front

cover of this manual for the location).

Before reading further, please review the drawing

below and familiarize yourself with the parts that are

labeled.

BEFORE YOU BEGIN

Handrail

Lock Pin

Key/

Clip

Weight

Rack

Hand

Weight

Backrest

Seat

Support

Bench Knob

Circuit

Breaker

Walking Belt

Incline Knob

Cushioned Walking Platform

Foot Rail

Power

Cord

Rear Roller

Adjustment Bolts

Water Bottle

Holder (Water

Bottle is not

included)

Towel Rack

Accessory Tray

Incline Leg

6

ASSEMBLY

Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not

dispose of the packing materials until assembly is completed. Assembly requires a phillips screwdriver

(not included).

1. With the help of a second person, carefully raise the

Uprights (102) until the CROSSTRAINER is in the posi-

tion shown at the right.

2. Locate the Left Weight Rack (82), which can be identi-

fied by the hole near the top. Attach the Left Weight

Rack to the left Upright (102) with six Weight Rack

Screws (77).

Attach the Right Weight Rack to the right Upright in the

same manner (not shown).

3. Slide the Lock Pin Collar (84) and the Spring (83) onto

the Lock Pin (87). Insert the Lock Pin into the left

Upright (102) and the Left Weight Rack (82). Tighten

the Treadmill Knob (78) onto the Lock Pin.

1

2

3

102

77 82

102

Hole

77

77

87

83 84

82

102

78

7

4. Put a 2-lb. Weight (79) on the upper hooks on the Right

Weight Rack (99). Put a 4-lb. Weight (80) on the center

hooks on the Right Weight Rack. Put a 6-lb. Weight

(81) on the lower hooks on the Right Weight Rack.

Put the remaining Weights on the Left Weight Rack

(not shown).

5. Remove the backing from the Adhesive Clip (129).

Press the Adhesive Clip onto the base of the Uprights

(102) in the indicated location. Press the Allen Wrench

(116) into the Adhesive Clip.

6. Make sure that all parts of the CROSSTRAINER are properly tightened. To protect the floor or carpet

from damage, place a mat under the CROSSTRAINER.

4

5

79

80

81

99

116

102

129

8

HOW TO OPERATE THE TREADMILL

HOW TO PLUG IN THE POWER CORD

The CROSSTRAINER, like any other type of sophisti-

cated electronic equipment, can be seriously dam-

aged by sudden voltage changes in your home’s

power. Voltage surges, spikes, and noise interference

can result from weather conditions or from other appli-

ances being turned on or off. To decrease the possi-

bility of the CROSSTRAINER being damaged,

always use a surge suppressor (see drawing 1 at

the right).

Surge suppressors are sold at most hardware stores

and department stores. Use only a single-outlet surge

suppressor that is UL 1449 listed as a transient voltage

surge suppressor (TVSS). The surge suppressor must

have a UL suppressed voltage rating of 400 volts or

less and a minimum surge dissipation of 450 joules.

The surge suppressor must be electrically rated for

120 volts AC and 15 amps.

This product must be grounded. If it should malfunc-

tion or break down, grounding provides a path of least

resistance for electric current to reduce the risk of elec-

tric shock. This product is equipped with a cord having

an equipment-grounding conductor and a grounding

plug. Plug the power cord into a surge suppressor,

and plug the surge suppressor into an appropriate

outlet that is properly installed and grounded in

accordance with all local codes and ordinances.

This product is for use on a nominal 120-volt circuit,

and has a grounding plug that looks like the plug illus-

trated in drawing 1 at the right. A temporary adapter

that looks like the adapter illustrated in drawing 2 may

be used to connect the surge suppressor to a 2-pole

receptacle as shown in drawing 2 if a properly

grounded outlet is not available.

The temporary adapter should be used only until a

properly grounded outlet (drawing 1) can be installed

by a qualified electrician.

The green-colored rigid ear, lug, or the like extending

from the adapter must be connected to a permanent

ground such as a properly grounded outlet box cover.

Whenever the adapter is used it must be held in place

by a metal screw. Some 2-pole receptacle outlet box

covers are not grounded. Contact a qualified elec-

trician to determine if the outlet box cover is

grounded before using an adapter.

DANGER: Improper connection

of the equipment-grounding conductor can

result in an increased risk of electric shock.

Check with a qualified electrician or service-

man if you are in doubt as to whether the

product is properly grounded. Do not modify

the plug provided with the product—if it will

not fit the outlet, have a proper outlet

installed by a qualified electrician.

1

2

Grounded Outlet Box

Grounded Outlet Box

Grounding Plug

Surge Suppressor

Surge Suppressor

Grounding Pin

Adapter

Lug

Metal Screw

Grounded Outlet

Grounding Pin

9

HOW TO LOWER THE TREADMILL FOR USE

To use the treadmill, the bench must be folded to the

storage position. See HOW TO FOLD THE BENCH

TO THE STORAGE POSITION on page 14.

Caution: You must be able to safely lift 45 pounds

(20 kg) in order to lower the treadmill.

To lower the

treadmill, hold

the upper end

of the treadmill

with your right

hand as shown.

Hold the tread-

mill knob with

your left hand

and pull it to

the left. Pivot

the treadmill

down a few

inches.

Next, hold the treadmill with both hands as shown

below and lower the treadmill to the floor. To decrease

the possibility of injury, bend your legs and keep

your back straight.

THE PERFORMANT LUBETM WALKING BELT

The CROSSTRAINER features a walking belt coated

with PERFORMANT LUBETM, a high-performance

lubricant. IMPORTANT: Never apply silicone spray

or other substances to the walking belt or the

walking platform. Such substances will deteriorate

the walking belt and cause excessive wear.

BATTERY INSTALLATION

The console requires three "AA" batteries (not

included) for operation. Alkaline batteries are recom-

mended.

To install

batteries, first

open the bat-

tery cover

under the

console as

shown. Next,

press three

batteries into

the battery

compartment.

Make sure that

the negative ends of the batteries (marked “–”) are

touching the springs in the battery compartment.

Close the battery cover.

Note: If there is a thin sheet of clear film on the face of

the console, remove it.

Batteries

Battery Cover

Treadmill

Knob

CAUTION:Before operating the

console, read the following precautions.

• Do not stand on the walking belt when turn-

ing on the power.

• Always wear the clip (see the drawing on

page 10) while using the CROSSTRAINER.

When the key is removed from the console,

the walking belt will stop.

• The CROSSTRAINER is capable of high

speeds. Adjust the speed in small incre-

ments.

• The training zones marked beside the

speed control are general guidelines only.

See page 12 for more information.

• To reduce the possibility of electric shock,

keep the console dry. Avoid spilling liquids

on the console. Use only a sealable water

bottle.

DIAGRAM OF THE CONSOLE

Clip Key

Speed Control

Monitor Displays

LED Track

STEP BY STEP CONSOLE OPERATION

Step onto the foot rails of the treadmill. Find the clip

attached to the key (see the drawing above), and slide

the clip onto the waistband of your clothing. Follow the

steps below and on page 11 to operate the console.

Insert the key fully into the power switch.

When the key is in-

serted, the first indi-

cator in the LED track

will light. The four dis-

plays will not turn on

until the ON/RESET

button is pressed or

the walking belt is started. Note: If you just installed

batteries, the displays will already be on.

Reset the speed control.

Slide the speed control

down to the RESET

position. Note: Each

time the walking belt

is stopped, the

speed control must

be moved to the

RESET position be-

fore the walking belt

can be restarted.

Start the walking belt.

After you have moved the speed control to the

RESET position, slide it slowly upward until the

walking belt begins to move at slow speed.

Carefully begin walking on the walking belt.

Change the speed of the walking belt as desired

by sliding the speed control. To stop the walking

belt, step onto the foot rails and slide the speed

control to the RESET position.

Change the incline of the treadmill, if desired.

To vary the intensity of your exercise, the incline of

the treadmill can be changed using the incline

knob on the left foot rail. Before changing the in-

cline, stop the walking belt.

To increase

the incline,

stand with

your right

foot near

the back of

the right

foot rail.

Using your left foot, press down the incline knob

until the desired incline is reached. To decrease

the incline, stand with your right foot near the

front of the right foot rail while pressing down

the incline knob. Note: It may be helpful to step off

the treadmill when pressing down on the incline

knob to decrease the incline.

1

Note: If there is a thin sheet of clear

plastic on the console, remove it.

2

3

4

Incline

Knob

10

Follow your progress with the LED track and the

four monitor displays.

The LED

Track—The

LED track in the

center of the

console repre-

sent a distance

of 1/4 mile. As

you exercise,

the indicators

around the track will light one at a time until you have

completed 1/4 mile. The first indicator above the

word START will then light and another lap will begin.

The TIME display—

This display shows the

total time that you have

walked or run on the

treadmill.

The DISTANCE

display—This display

shows the total distance

that you have walked or

run, in miles.

The SPEED display—

This display shows the

speed of the walking belt,

in miles per hour.

The CALORIES/

FAT CALORIES

display—This display

shows the approximate

numbers of calories and

fat calories you have

burned. (See FAT

BURNING on page 12.) Every seven seconds, the

display will change from one number to the other.

Arrows in the display will indicate which number is

currently shown.

Note: The displays can be reset by pressing the

ON/RESET button.

When you are finished exercising, stop the

walking belt and remove the key.

Step onto the foot rails,

stop the walking belt,

and remove the key

from the console. Store

the key in a secure

place. After the key is

removed, the displays

will remain on for about five minutes.

Note: Any time that the walking belt is stopped

and no console buttons are pressed for five

minutes, the displays will automatically turn off.

HOW TO FOLD THE TREADMILL TO THE STORAGE

POSITION

Before folding the treadmill, unplug the power cord.

Caution: You must be able to safely lift 45 pounds

(20 kg) in order to raise the treadmill.

Hold the treadmill in the locations shown below. To de-

crease the possibility of injury, bend your legs and

keep your back straight. As you raise the treadmill,

make sure to lift with your legs rather than your

back. Raise the treadmill until it is almost vertical.

Next, hold the

upper end of

the treadmill

with your right

hand as shown.

Using your left

hand, pull the

treadmill knob

to the left. Pivot

the treadmill

until the lock

pin is aligned

with the hole in

the side of the

treadmill frame

(refer to the

inset drawing).

Slowly release the knob. Make sure that the lock pin is

inserted into the hole in the treadmill frame.

Note: To protect the floor or carpet from damage,

place a mat under the CROSSTRAINER. Keep the

CROSSTRAINER out of direct sunlight. Do not leave

the CROSSTRAINER in the storage position in tem-

peratures above 85° Fahrenheit.

Lock Pin

Treadmill

Knob

11

Arrow

6

5

HOW TO EXERCISE ON THE TREADMILL

The following guidelines will help you to plan your ex-

ercise program. Remember—these are general guide-

lines only.

EXERCISE INTENSITY

Whether your goal is to burn fat or to strengthen your

cardiovascular system, the key to achieving the de-

sired results is to exercise with the proper intensity.

The proper intensity level can be found by using your

heart rate as a guide. The chart below shows recom-

mended heart rates for fat burning and aerobic exer-

cise.

To find the proper heart rate for you, first find your age

on the left side of the chart (ages are rounded off to

the nearest ten years). Next, find the three numbers to

the right of your age. The three numbers are your

“training zone.” The lower two numbers are recom-

mended heart rates for fat burning; the higher number

is the recommended heart rate for aerobic exercise.

Fat Burning

To burn fat effectively, you must exercise at a relatively

low intensity level for a sustained period of time. During

the first few minutes of exercise, your body uses easily

accessible carbohydrate calories for energy. Only after

the first few minutes does your body begin to use

stored fat calories for energy. If your goal is to burn fat,

adjust the speed and incline of the treadmill until your

heart rate is near one of the lower two numbers in your

training zone. It may also be helpful to set the speed

control on the console to FAT BURN to help you main-

tain the proper intensity level. (See page 10.)

Aerobic Exercise

If your goal is to strengthen your cardiovascular sys-

tem, your exercise must be “aerobic.” Aerobic exercise

is activity that requires large amounts of oxygen for

prolonged periods of time. This increases the demand

on the heart to pump blood to the muscles, and on the

lungs to oxygenate the blood. For aerobic exercise,

adjust the speed and incline of the treadmill until your

heart rate is near the highest number in your training

zone. It may also be helpful to set the speed control on

the console to AEROBIC to help you maintain the

proper intensity level. (See page 10.)

High Performance Athletic Conditioning

If your goal is high performance athletic conditioning,

set the speed control on the console to PERFOR-

MANCE to help you maintain the proper intensity level.

(See page 10.) Note: During the first few weeks of your

exercise program, keep your heart rate near the low

end of your training zone.

HOW TO MEASURE YOUR HEART RATE

To measure your

heart rate, stop ex-

ercising and place

two fingers on

your wrist as

shown. Take a six-

second heartbeat

count, and multiply

the result by ten to

find your heart rate. (A six-second count is used be-

cause your heart rate drops quickly when you stop ex-

ercising.) If your heart rate is too high or too low, adjust

the speed or incline of the treadmill accordingly.

WORKOUT GUIDELINES

A well-rounded workout includes the following three

important parts:

A Warm-up

Start each workout with 5 to 8 minutes of stretching

and light exercise (see SUGGESTED STRETCHES on

page 13). A proper warm-up increases your body

temperature, heart rate, and circulation in preparation

for exercise.

WARNING: Before beginning

this or any exercise program, consult your

physician. This is especially important for in-

dividuals over the age of 35 or individuals

with pre-existing health problems.

12

Training Zone Exercise

After warming up, increase the intensity of your exer-

cise until your heart rate is in your training zone for 20

to 60 minutes. (During the first few weeks of your exer-

cise program, do not keep your heart rate in your train-

ing zone for longer than 20 minutes.) Breathe regularly

and deeply as you exercise—do not hold your breath.

A Cool-down

Finish each workout with 5 to 8 minutes of stretching

to cool down. This will increase the flexibility of your

muscles and will help to prevent post-exercise problems.

Exercise Frequency

To maintain or improve your condition, complete three

workouts each week, with at least one day of rest be-

tween workouts. After a few months, you may com-

plete up to five workouts each week if desired.

The key to success is to make exercise a regular and

enjoyable part of your everyday life.

SUGGESTED STRETCHES

The correct form for several basic stretches is shown at the

right. Move slowly as you stretch—never bounce.

1. Toe Touch Stretch

Stand with your knees bent slightly and slowly bend forward

from your hips. Allow your back and shoulders to relax as you

reach down toward your toes as far as possible. Hold for 15

counts, then relax. Repeat 3 times. Stretches: Hamstrings,

back of knees, and back.

2. Hamstring Stretch

Sit with one leg extended. Bring the sole of the opposite foot

toward you and rest it against the inner thigh of your extended

leg. Reach toward your toes as far as possible. Hold for 15

counts, then relax. Repeat 3 times for each leg. Stretches:

Hamstrings, lower back, and groin.

3. Calf/Achilles Stretch

With one leg in front of the other, reach forward and place your

hands against a wall. Keep your back leg straight and your

back foot flat on the floor. Bend your front leg, lean forward and

move your hips toward the wall. Hold for 15 counts, then relax.

Repeat 3 times for each leg. To cause further stretching of the

achilles tendons, bend your back leg as well. Stretches:

Calves, achilles tendons, and ankles.

4. Quadriceps Stretch

With one hand against a wall for balance, reach back and

grasp one foot with your other hand. Bring your heel as close

to your buttocks as possible. Hold for 15 counts, then relax.

Repeat 3 times for both legs. Stretches: Quadriceps and hip

muscles.

5. Inner Thigh Stretch

Sit with the soles of your feet together and your knees outward.

Pull your feet toward your groin area as far as possible. Hold

for 15 counts, then relax. Repeat 3 times. Stretches:

Quadriceps and hip muscles.

1

2

3

4

5

13

14

HOW TO LOWER THE BENCH FOR USE

To use the bench, the treadmill must be folded to the

storage position. See HOW TO FOLD THE TREAD-

MILL TO THE STORAGE POSITION on page 11.

To lower the

bench, first

pivot the knob

catch up (see

inset drawing).

Hold the end of

the bench as

shown—do not

hold the leg.

Using your

right hand,

slide the bench

knob to the

right as far as

possible. Make

sure that the

knob is moved

all of the way

to the “bench”

position. Note: It may

be necessary to push

on the leg while you

slide the knob to the

“bench” position .

Lower the bench until the leg is resting on the floor.

HOW TO ADJUST THE BACKREST

The backrest can be used in a level position or in either

of two inclined positions. When the bench is first

lowered, the backrest will be in the level position. To

adjust the backrest to one of the inclined positions, first

raise the backrest and lower the support (see the draw-

ing below). Rest the end of the support against either

of the backrest stops as shown. Make sure that the

support is resting against one of the backrest stops.

To adjust the

backrest to the

level position,

first raise the

backrest

slightly. Pivot

the end of the

support in the

direction

shown by the

arrow. Lower

the backrest

onto the bench

frame.

HOW TO FOLD THE BENCH TO THE STORAGE

POSITION

Raise the

bench to the

vertical posi-

tion and hold it

in place. Using

your right

hand, slide the

bench knob to

the left as far

as possible.

Make sure

that the knob

is moved all

of the way to

the “tread-

mill” position.

Refer to the

inset drawing.

Make sure

that the lock

pin is inserted

in the hole into the bench frame. Pivot the knob catch

down around the knob.

Bench

Knob

HOW TO OPERATE THE WEIGHT BENCH

Backrest

Backrest Stops

Support

Bench

Knob

Support

Lock

Pin

Bench

Knob

Knob

Catch

Leg

Bench

Knob

Knob

Catch

15

The CROSSTRAINER offers a variety of exercises

designed to trim, tone, and strengthen the body.

Please read these guidelines before using the weight

bench.

WARNING: Before beginning any exercise pro-

gram, consult your physician. This is especially

important for persons over the age of 35 or per-

sons with pre-existing health problems.

STRENGTH TRAINING GUIDELINES

Your strength training program should include 3 work-

outs each week. To give your body time to rest, work-

outs should be on alternating days, such as Monday,

Wednesday, and Friday.

Instead of waiting for a convenient time to exercise,

plan a specific time. The morning hours work well for

many, and the self-discipline required to rise early and

exercise may result in greater productivity throughout

the day. For others, exercising before dinner offers a

chance to wind down from the day’s activities. What-

ever time you choose, be consistent and stick with it.

Each workout should include the following three

essential parts: (1) a warm-up, (2) 6 to 10 exercises,

and (3) a cool-down.

Begin each workout with 5 to 8 minutes of stretching to

warm up (see SUGGESTED STRETCHES on page

13). This will prepare the body for exercise by increas-

ing circulation, delivering more oxygen to the muscles,

and raising the body temperature.

Next, perform 6 to 10 of the exercises shown on the in-

cluded chart. To give balance and variety to your work-

outs, vary the exercises from workout to workout.

Begin with 1 set of 12 repetitions for each exercise. (A

“repetition” is one complete cycle of an exercise, such

as one sit-up. A “set” is a series of repetitions per-

formed without pausing.) As your fitness level in-

creases, perform 2 or 3 sets for each exercise. Always

rest for at least 1 minute after each set. When you can

complete 3 sets of 12 repetitions without difficulty, you

may choose to use heavier weights. CAUTION: The

CROSSTRAINER includes three pairs of hand

weights. Other hand-held weights may be used

with the CROSSTRAINER; however, do not put

other weights on the weight rack, or use weights

weighing more than 20 pounds each.

Finish each workout with 5 to 8 minutes of stretching to

cool down. This will increase your flexibility, and will

help to reduce soreness.

It is very important to avoid overdoing it during the first

few months of your exercise program, and to progress

at your own pace. CAUTION: If you feel pain or

dizziness at any time, stop immediately and begin

cooling down.

EXERCISE FORM

For the best results, correct form is important.

Maintaining proper form means moving through the full

range of motion for each exercise, and moving only the

appropriate parts of the body. The photographs on the

included chart show the correct starting and ending po-

sitions for each exercise. Make sure to perform each

exercise with a smooth, steady motion. Exhale as you

exert yourself, and inhale as you return to the starting

position; never hold your breath.

STAYING MOTIVATED

To stay motivated, try listening to music or watching

television while you exercise. It may also be helpful to

work out with a training partner. If desired, use a calen-

dar to keep a record of your workouts, and write key

body measurements at the end of every month.

Remember, the key to lasting results is to make exer-

cise a regular and enjoyable part of your daily life.

HOW TO EXERCISE ON THE WEIGHT BENCH

16

MAINTENANCE AND TROUBLE-SHOOTING

Most problems can be solved by following the steps in this section. If further assistance is needed, call

our toll-free HELPLINE at 1-800-736-6879, Monday through Saturday, 7 a.m. until 7 p.m. Central Time

(excluding holidays).

PROBLEM: The power does not turn on

SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor

is plugged into a properly grounded outlet (see page 8). Use only a single-outlet surge suppres-

sor that is UL 1449 listed as a transient voltage surge suppressor (TVSS). The surge suppressor

must have a UL suppressed voltage rating of 400 volts or less and a minimum surge dissipation

of 450 joules. The surge suppressor must be electrically rated for 120 volts AC and 15 amps.

b. After the power cord has been plugged in, make sure that the key is fully inserted into the con-

sole. See step 1 on page 10.

c. Check the circuit breaker located on the treadmill

frame near the power cord. If the switch protrudes

as shown, the circuit breaker has tripped. To reset

the circuit breaker, wait for five minutes and then

press the switch back in.

PROBLEM: The power turns off during use

SOLUTION: a. Check the circuit breaker located on the treadmill frame near the power cord (see the drawing

above). If the circuit breaker has tripped, wait for five minutes and then press the switch back in.

b. Make sure that the power cord is plugged in.

c. Remove the key from the console. Reinsert the key fully into the console. See step 1 on page 10.

d. If the treadmill still will not run, please call our toll-free HELPLINE.

PROBLEM: The displays of the console do not function properly

SOLUTION: a. Check the batteries in the console. See BATTERY INSTALLATION on page 9. Most problems

are the result of drained batteries.

b. Remove the six screws from the hood. Carefully re-

move the hood. Locate the Reed Switch (45) and

the Magnet (44) on the left side of the Pulley (49).

Turn the Pulley until the Magnet is aligned with the

Reed Switch. Make sure that the gap between the

Magnet and the Reed Switch is about 1/8”. If nec-

essary, loosen the Screw (53) and move the Reed

Switch slightly. Retighten the Screw. Re-attach the

hood, and run the treadmill for a few minutes to

check for a correct speed reading.

Tripped

Reset

Tripped Reset

c

44

45

53

Top

View

1/8” 49

17

PROBLEM: The walking belt is off-center or slips when walked on

SOLUTION: a. If the walking belt has shifted to the left, first re-

move the key and UNPLUG THE POWER CORD.

Using the allen wrench, turn the left rear roller adjust-

ment bolt clockwise, and the right bolt counterclock-

wise, 1/4 of a turn each. Be careful not to overtighten

the walking belt. Plug in the power cord, insert the

key and run the treadmill for a few minutes. Repeat

until the walking belt is centered.

b. If the walking belt has shifted to the right, first re-

move the key and UNPLUG THE POWER CORD.

Using the allen wrench, turn the left rear roller adjust-

ment bolt counterclockwise, and the right bolt clock-

wise, 1/4 of a turn each. Be careful not to overtighten

the walking belt. Plug in the power cord, insert the

key and run the treadmill for a few minutes. Repeat

until the walking belt is centered.

c. If the walking belt slips when walked on, first re-

move the key and UNPLUG THE POWER CORD.

Using the allen wrench, turn both rear roller adjust-

ment bolts clockwise, 1/4 of a turn. When the walking

belt is correctly tightened, you should be able to lift

each side of the walking belt 3 to 4 inches off the

walking platform. Be careful to keep the walking belt

centered. Plug in the power cord, insert the key and

run the treadmill for a few minutes. Repeat until the

walking belt is properly tightened.

PROBLEM: The walking belt slows when walked on

SOLUTION: a. Use only a single-outlet surge suppressor that is UL 1449 listed as a transient voltage surge sup-

pressor (TVSS). The surge suppressor must have a UL suppressed voltage rating of 400 volts or

less and a minimum surge dissipation of 450 joules. The surge suppressor must be electrically

rated for 120 volts AC and 15 amps.

b. If the walking belt is overtightened, treadmill perfor-

mance may decrease and the walking belt may be

permanently damaged. Remove the key and UN-

PLUG THE POWER CORD. Using the allen wrench,

turn both rear roller adjustment bolts counterclock-

wise, 1/4 of a turn. When the walking belt is properly

tightened, you should be able to lift each side of the

walking belt 3 to 4 inches off the walking platform. Be

careful to keep the walking belt centered. Plug in the

power cord, insert the key and run the treadmill for a

few minutes. Repeat until the walking belt is properly

tightened.

c. If the walking belt still slows when walked on, please call our toll-free HELPLINE.

b

c

a

Rear Roller Adjustment Bolts

3”–4”

b

18

HOW TO MOVE THE CROSSTRAINER

Before moving the CROSSTRAINER, make sure that the bench and treadmill are folded to the storage

position, and that the lock pins are fully engaged (see HOW TO FOLD THE TREADMILL TO THE STOR-

AGE POSITION on page 11, and HOW TO FOLD THE BENCH TO THE STORAGE POSITION on page 14).

To move the CROSSTRAINER, first hold the handrails

and place one foot on the base as shown.

Next, tilt the CROSSTRAINER back until it rolls freely on

the front wheels. Carefully move the CROSSTRAINER to

the desired location. Place one foot on the base, and

carefully lower the CROSSTRAINER until it is resting on

the base. Never move the CROSSTRAINER without

tipping it back, or the base pads may come off. To re-

duce the risk of injury, use extreme caution while

moving the CROSSTRAINER. Do not move the

CROSSTRAINER over an uneven surface.

Base

Front Wheels

PART LIST—Model No. 831.297471 R0498A

To identify the parts listed below, refer to the EXPLODED DRAWING attached in the center of this manual.

Key No. Qty. Description

1 1 Backrest

2 8 Backrest Screw

3 14 Nut

4 2 Backrest Support Bolt

5 1 Left Backrest Frame

6 1 Right Backrest Frame

7 2 Bench Frame Spacer

8 1 Bench Bracket

9 2 Bench Bracket Bolt

10 1 Bench Pivot Bolt

11 2 Bench Support

Pivot Bolt

12 1 Backrest Support

13 1 Bench Adjustment

14 1 Bench Seat

15 1 Bench Pin

16 1 Bench Back

17 20 Plastic Fastener

18 2 Bench Leg Cap

19 1 Bench Leg

20 1 Bench Leg Pivot Bolt

21 1 Bench Poster (small)

22 1 Bench Poster (large)

23 1 Bench Bottom

24 2 Rear Roller Adj. Bolt

25 5 Adjustment Washer

26 2 Rear Roller

Endcap Screw

27 2 Endcap Screw

28 1 Rear Roller Endcap

29 1 Latch Warning Decal

30 1 Belly Pan

31 1 Frame

32 2 Solid Isolator

33 2 Rear Isolator Screw

34 4 Hood Anchor

35 4 Isolator

36 1 Rear Roller

37 1 Left Foot Rail

38 1 Right Foot Rail

39 1 Walking Belt

40 1 Motor Pivot Nut

41 6 Walking Platform Screw

42 1 Walking Platform

43 2 Upright Spacer

44 1 Magnet

45 1 Reed Switch/Sensor

Wire

46 1 Reed Switch Clip

47 1 Ground Wire

48 2 Upright Pivot Washer

49 1 Front Roller/Pulley

50 2 Cage Nut

51 1 Front Roller Adj. Bolt

52 2 Belt Guide

53 50 Screw

Key No. Qty. Description

54 4 Incline Bracket Bolt

55 1 Incline Knob

56 1 Incline Knob Sleeve

57 1 Cable Lock Washer

58 1 Bench Lock Pin

59 2 Bench Latch Bolt

60 2 Bench Latch Washer

61 1 Latch Frame Spacer

62 1 Latch Slide

63 1 Latch

64 2 Latch Nut

65 1 Latch Bracket

66 2 Incline Leg Bolt

67 2 Wheel Bolt

68 2 Wheel

69 1 Motor

70 1 Flywheel

71 1 Incline Leg

72 3 4” Cable Tie

73 4 Tie Clamp

74 2 Spring Screw

75 2 Releasable Tie

76 4 7 1/2” Cable Tie

77 12 Weight Rack Screw

78 2 Lock Knob

79 2 2-lb. Weight

80 2 4-lb. Weight

81 2 6-lb. Weight

82 1 Left Weight Rack

83 1 Lock Knob Spring

84 1 Lock Pin Collar

85 1 Incline Knob Bracket

86 1 Latch Clip

87 1 Treadmill Lock Pin

88 2 Handrail Cap

89 1 Motor Belt

90 4 Console Base Screw

91 2 Frame Guide

92 1 Console Base

93 1 Speed Control Knob

94 1 Speed Potentiometer

95 1 Battery Cover

96* 1 Console

97 1 Incline Shock Spacer

98 1 Key/Clip

99 1 Right Weight Rack

100* 1 Motor Assembly

101 1 Motor Pivot Bolt

102 1 Upright Base

103 1 Shock

104 1 Frame Guide

105 1 Motor Tension Washer

106 1 Tension Star Washer

107 1 Motor Tension Nut

108 1 Wire Harness

109 2 Front Wheel Bolt

Key No. Qty. Description

110 2 Front Wheel

111 2 Front Wheel Nut

112 1 Choke

113 1 Power Cord

114 1 Circuit Breaker

115 1 Power Cord Grommet

116 1 Allen Wrench

117 4 Base Pad

118 2 Upright Pivot Bolt

119 8 Upright Pivot Washer

120 1 Belly Pan

121 1 Console Base Plug

122 1 Shock Cushion

123 1 Controller

124 1 Hood Cover

125 1 Hood

126 2 Backrest Spacer

127 2 Bench Pin Cap

128 6 Front Belly Pan Screw

129 1 Adhesive Clip

130 1 Incline Cable

131 1 11 3/4” Cable Tie

132 1 Incline Lever

133* 1 Latch Assembly

134 1 Cable Lock Washer

135 1 Incline Shock

136 1 Shock Release

137 1 Shock Nut

138 1 Shock Star Washer

139 1 Nylon Washer

# 1 14” White Wire, M/F

# 1 User’s Manual

* Includes all parts shown in the box

# These parts are not illustrated

19

53

123

77

77

77

78

88

82

102

83

84

86

87

90

89

90

99

77

77

77

40

88

100*

101

54

105

106

107

103

109

111

110 112

53

111

110

115

114

113

109

53

117

53

117

118

119

128

120 128

53

53

53

125

124

98

96*

93

94

95

53

53

92

81

80

79

80

108

119

118

69

70

53

117

53

34

34

53

34

121

1

2

3

5

6

4

212 3

2

11

14

8

9

7

11

7

10

37

15

2

16

17

23

17

17

17

17

24

25

28

25

27

26

26

25

27

24

25

22

21

76

75 53

73

17

31

29

17

17

66

67

68

69

3

71

66

67 58

53

64 65

63

62

61

60

74

59

53

35

17

17

17

53

35

43

3

50

50

49

3

53

46

45

44

42

39

30

32

33

53

35

41

53

41

35

43

38

32

36

3

13

126

2

20

3

18

19

17

18

78

68

52

51

25

127

127

104

91

53

53

53

129

116

53

47

54

57

134

57

54

135

122

140

139137

55

85

130

53

53

57

56

138

130

132

133*

69

72

131 119

139

119

119

EXPLODED DRAWING—Model No. 831.297471 R0498A

Part No. 144092 H00823-C R0498A Printed in USA © 1998 Sears, Roebuck and Co.

The model number and serial number of your PROFORM®

CROSSTRAINER are listed on a decal attached to the frame. See

the front cover of this manual to find the location of the decal.

All replacement parts are available for immediate purchase or

special order when you visit your nearest SEARS Service Center.

To request service or to order parts by telephone, call the toll-free

numbers listed at the left.

When requesting help or service, or ordering parts, please be

prepared to provide the following information:

• The NAME OF THE PRODUCT (PROFORM®CROSSTRAINER)

• The MODEL NUMBER OF THE PRODUCT (831.297471)

• The KEY NUMBER AND DESCRIPTION OF THE PART (see the

PART LIST on page 19 and the EXPLODED DRAWING attached

to the center of this manual)

Model No. 831.297471

QUESTIONS?

If you find that:

• you need help assembling or

operating the PROFORM®

CROSSTRAINER

• a part is missing

• or you need to schedule repair

service

call our toll-free HELPLINE

1-800-736-6879

Monday–Saturday, 7 am–7 pm

Central Time (excluding holidays)

REPLACEMENT

PARTS

If parts become worn and need

to be replaced, call the following

toll-free number

1-800-FON-PART

(1-800-366-7278)