Proform 299260 735Cs Treadmill Users Manual *299260 163772

Proform-299260-Owner-S-Manual proform-299260-owner-s-manual

831.299260 to the manual 6ab35390-775e-4a3a-b281-d2ac52e2597a

2015-04-13

: Proform Proform-299260-735Cs-Treadmill-Users-Manual-697547 proform-299260-735cs-treadmill-users-manual-697547 proform pdf

Open the PDF directly: View PDF .
Page Count: 26

Download
Open PDF In Browser	View PDF

Model No. 831.299260
Serial No.

USER'S MANUAL

Find the serial number in the location
shown below. Write the serial number
in the space above for reference.

Serial
Number
Decal

SEARS, ROEBUCK AND CO.
HOFFMAN ESTATES, IL 60179

CAUTION
Read all precautions and instructions in this manual before using
this equipment. Save this manual
for future reference.

Patent Pending

Visit our website at
www.proform.com
new products, prizes,
fitness tips, and much more!

TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
TROUBLE-SHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
FULL 90-DAY WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
Note: An EXPLODED DRAWING is attached in the center of this manual.

IMPORTANT PRECAUTIONS
WARNING:

To reduce the risk of burns, fire, electric shock, or injury to persons, read the
following important precautions and information before operating the treadmill.
1. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.

pation of 450 joules. The surge suppressor
must be electrically rated for 120 volts AC and
15 amps. To purchase a surge suppressor, see
your local PROFORM dealer or call 1-800-3667278 and order part number 14657.

2. Use the treadmill only as described.
3. Place the treadmill on a level surface, with at
least eight feet of clearance behind it. Do not
place the treadmill on any surface that blocks
air openings. To protect the floor or carpet
from damage, place a mat under the treadmill.

12. Keep the power cord and the surge suppressor away from heated surfaces.

4. Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a
garage or covered patio, or near water.

13. Never move the walking belt while the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See
BEFORE YOU BEGIN on page 5 if the treadmill is not working properly.)

5. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.

14. Never start the treadmill while you are standing on the walking belt. Always hold the
handrails while using the treadmill.

6. Keep children under the age of 12 and pets
away from the treadmill at all times.

15. The treadmill is capable of high speeds.
Adjust the speed in small increments to avoid
sudden jumps in speed.

7. The treadmill should not be used by persons
weighing more than 250 pounds.

16. The pulse sensor is not a medical device.
Various factors, including the user's movement, may affect the accuracy of heart rate
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.

8. Never allow more than one person on the
treadmill at a time.
9. Wear appropriate exercise clothing when
using the treadmill. Do not wear loose clothing that could become caught in the treadmill.
Athletic support clothes are recommended for
both men and women. Always wear athletic
shoes. Never use the treadmill with bare feet,
wearing only stockings, or in sandals.

17. Never leave the treadmill unattended while it
is running. Always remove the key, unplug
the power cord and move the on/off switch to
the off position when the treadmill is not in
use. (See the drawing on page 5 for the location of the on/off switch.)

10. When connecting the power cord (see page 8),
plug the power cord into a surge suppressor
(not included) and plug the surge suppressor
into a grounded circuit capable of carrying 15
or more amps. No other appliance should be
on the same circuit. Do not use an extension
cord.

18. Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See
ASSEMBLY on page 6, and HOW TO FOLD
AND MOVE THE TREADMILL on page 19.) You
must be able to safely lift 45 pounds (20 kg) in
order to raise, lower, or move the treadmill.

11. Use only a single-outlet surge suppressor that
is UL 1449 listed as a transient voltage surge
suppressor (TVSS). The surge suppressor
must have a UL suppressed voltage rating of
400 volts or less and a minimum surge dissi-

19. Do not change the incline of the treadmill by
placing objects under the treadmill.
20. When folding or moving the treadmill, make
sure that the storage latch is fully closed.

24. Inspect and tighten all parts of the treadmill
regularly.

21. When using i-Fit.com CDÕs and videos, an
electronic ÒchirpingÓ sound will alert you
when the speed and/or incline of the treadmill
is about to change. Always listen for the
ÒchirpÓ and be prepared for speed and/or incline changes. In some instances, the speed
and/or incline may change before the personal trainer describes the change.

25. Never insert or drop any object into any
opening.
26.

DANGER: Always unplug the power
cord immediately after use, before cleaning
the treadmill, and before performing the maintenance and adjustment procedures described in this manual. Never remove the
motor hood unless instructed to do so by an
authorized service representative. Servicing
other than the procedures in this manual
should be performed by an authorized service
representative only.

22. When using i-Fit.com CDÕs and videos, you
can manually override the speed and incline
settings at any time by pressing the speed
and incline buttons. However, when the next
ÒchirpÓ is heard, the speed and/or incline will
change to the next settings of the CD or video
program.
23. Always remove i-Fit.com CDÕs and videos
from your CD player or VCR when you are not
using them.

27. This treadmill is intended for in-home use
only. Do not use this treadmill in any commercial, rental, or institutional setting.

WARNING:

Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. SEARS assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS
The decals shown below have been placed on your treadmill. If a decal is missing, or if it is not legible,
please call our toll-free HELPLINE to order a free replacement decal (see the front cover of this manual).
Apply the decal in the location shown.

Note: This decal is shown at 38% of actual size.

BEFORE YOU BEGIN
Thank you for selecting the revolutionary PROFORM¨
735CS treadmill. The 735CS treadmill combines advanced technology with innovative design to help you
get the most from your exercise program in the convenience and privacy of your home. And when youÕre not
exercising, the unique 735CS can be folded up, requiring less than half the floor space of other treadmills.

Monday through Saturday, 7 a.m. until 7 p.m. Central
Time (excluding holidays). To help us assist you,
please note the product model number and serial number before calling. The model number of the treadmill
is 831.299260. The serial number can be found on a
decal attached to the treadmill (see the front cover of
this manual for the location).

For your benefit, read this manual carefully before
using the treadmill. If you have additional questions,
please call our toll-free HELPLINE at 1-800-736-6879,

Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.

Book Holder
Water Bottle
Holder (Bottle
not included)

Console

Pulse Sensor
Handrail
Key/Clip

LEFT SIDE

RIGHT SIDE
Lock Knob

On/Off Switch
Circuit
Breaker
Walking Belt

Foot Rail

Power Cord
Front
Wheel
Rear Roller
Adjustment Bolts

Cushioned Walking Platform

ASSEMBLY
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench
and your own phillips screwdriver
.
Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a
small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal
condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off
the lubricant with a soft cloth and a mild, non-abrasive cleaner.
1. With the help of a second person, carefully raise the
treadmill to the upright position.

While a second person tips the treadmill to one side and
holds it, insert one of the Extension Legs (103) into the
treadmill as shown. Make sure that the Extension Leg is
turned so the Base Pad (97) is on the bottom.

103

Next, tip the treadmill to the other side and insert the
other Extension Leg (not shown) in the same way. Lower
the side of the treadmill so that both Extension Legs
(103) are resting flat on the floor.

2. Hold the treadmill firmly with both hands, and lower the
treadmill to the floor. CAUTION: To decrease the possibility of injury, bend your legs and keep your back
straight.

3. With the help of a second person, carefully tip the
Uprights (82) down as shown. Make sure that the
Extension Legs (103) remain in the Uprights.

97, 9

Attach each Extension Leg (103) with two long
Extension Leg Screws (101) and a Base Pad (97) as
shown.

With the help of a second person, carefully tip the
Uprights (82) back to the vertical position.

101

Note: One replacement Base Pad (97) and Base Pad
Spacer (9) may be included. Use the extra Pad and
Spacer if one becomes worn or needs to be replaced.

97, 9
82

97
101
103
97, 9

103

4. Locate the plastic tie in the post on the left Upright (82).
Hold a Handrail Extension (85) in the position shown.
Insert the plastic tie into the Handrail Extension as you
insert the Handrail Extension into the post. Attach the
Handrail Extension with three short Screws (76). Note:
The plastic tie is tied to the Pulse Wire (84). Do not
damage the Pulse Wire. The Pulse Wire is used with
the optional chest pulse sensor (see page 18).

84
Plastic Tie
110

Slide a Handrail Foam Grip (110) onto the Handrail
Extension (85). If it is difficult to slide on the Foam Grip,
place a small amount of warm water and dish soap in the
Foam Grip. There may be one or two holes in the bottom
of the Foam Grip. Press a Plastic Fasteners (47) into
each hole.
Attach the other Handrail Extension and Handrail Foam
Grip to the right Upright (not shown). Note: There is not a
pulse wire in the right Upright.

Post

82
47

5
82

5. Make sure that the Lock Knob Sleeve (111) is fully inserted into the left Upright (82).
Remove the Lock Knob (102) from the Lock Pin (115).
Make sure that the Lock Pin Collar (113) and the Spring
(112) are on the Lock Pin. Insert the Lock Pin into the left
Upright (82) and tighten the Lock Knob onto it.

112

102

113
115
111

6. Refer to figure 6a. Look at the left Rear Foot (59) at the
back of the treadmill. If the left Rear Foot touches the
floor, go to step 7. If there is a space between the left
Rear Foot and the floor, follow the instructions below.

Hold the treadmill firmly with both hands, and raise the
treadmill to the storage position as described on page 19.
59
Refer to figure 6b. Using a phillips screwdriver, remove the
Screw (60), the Rear Foot (59) Rear Foot Spacer (11)
from the right side. Reattach the right Rear Foot with the
Screw. Hold the treadmill firmly with both hands, and
lower the treadmill as described on page 19.
Check the left Rear Foot again (not shown). If the left
Rear Foot is still off the floor, raise the treadmill and remove the left Rear Foot. Snap the Rear Foot Spacer (11)
onto the left Rear Foot and reattach the Rear Foot and
Spacer to the treadmill. Carefully lower the treadmill.

7. Make sure that all parts are tightened before you use the treadmill. Keep the included allen wrench in a
secure place. The allen wrench is used to adjust the walking belt (see page 21). To protect the floor or carpet
from damage, place a mat under the treadmill.

OPERATION AND ADJUSTMENT
THE PERFORMANT LUBETM WALKING BELT

This product is for use on a nominal 120-volt circuit,
and has a grounding plug that looks like the plug illustrated in drawing 1 below. A temporary adapter that
looks like the adapter illustrated in drawing 2 may be
used to connect the surge suppressor to a 2-pole
receptacle as shown in drawing 2 if a properly
grounded outlet is not available.

Your treadmill features a walking belt coated with
PERFORMANT LUBETM, a high-performance lubricant.
IMPORTANT: Never apply silicone spray or other
substances to the walking belt or the walking platform. Such substances will deteriorate the walking
belt and cause excessive wear.

HOW TO PLUG IN THE POWER CORD

Grounded Outlet Box
Surge Suppressor

DANGER: Improper connection

Grounding Pin

of the equipment-grounding conductor can
result in an increased risk of electric shock.
Check with a qualified electrician or serviceman if you are in doubt as to whether the
product is properly grounded. Do not modify
the plug provided with the productÑif it will
not fit the outlet, have a proper outlet
installed by a qualified electrician.

Grounding Pin
Grounded Outlet

Grounding Plug

2
Grounded Outlet Box
Adapter

Your treadmill, like any other type of sophisticated
electronic equipment, can be seriously damaged by
sudden voltage changes in your homeÕs power.
Voltage surges, spikes, and noise interference can
result from weather conditions or from other appliances
being turned on or off. To decrease the possibility of
your treadmill being damaged, always use a surge
suppressor with your treadmill (see drawing 1 at
the right).

Surge Suppressor

Lug
Metal Screw

To purchase a surge suppressor, see your local
PROFORM dealer or call toll-free 1-800-366-7278
and order part number 14657. Use only a single-outlet surge suppressor that is UL 1449 listed as a transient voltage surge suppressor (TVSS). The surge
suppressor must have a UL suppressed voltage rating
of 400 volts or less and a minimum surge dissipation of
450 joules. The surge suppressor must be electrically
rated for 120 volts AC and 15 amps.

The temporary adapter should be used only until a
properly grounded outlet (drawing 1) can be installed
by a qualified electrician.
The green-colored rigid ear, lug, or the like extending
from the adapter must be connected to a permanent
ground such as a properly grounded outlet box cover.
Whenever the adapter is used it must be held in place
by a metal screw. Some 2-pole receptacle outlet box
covers are not grounded. Contact a qualified electrician to determine if the outlet box cover is
grounded before using an adapter.

This product must be grounded. If it should malfunction or break down, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having
an equipment-grounding conductor and a grounding
plug. Plug the power cord into a surge suppressor,
and plug the surge suppressor into an appropriate
outlet that is properly installed and grounded in
accordance with all local codes and ordinances.

CONSOLE DIAGRAM
Manual/Program Indicators

LED Track

Displays

Note: If there is a thin sheet of clear plastic
on the face of the console, remove it.

Displays

i-Fit.com Indicator

Clip

Key

home stereo, portable stereo, or computer and play
special iFit.com CD programs (One CD is included.
Other CDÕs are available separately). IFit.com CD programs automatically control the speed and incline of
the treadmill as a personal trainer guides you through
every step of your workout. High-energy music provides added motivation. Each CD features two different programs designed by certified personal trainers.

CAUTION:

Before operating the
console, read the following precautions.
¥ Do not stand on the walking belt when turning on the power.
¥ Always wear the clip (see the drawing
above) while operating the treadmill.

In addition, you can connect the treadmill to your VCR
and TV and play iFit.com video programs (videocassettes are available separately). Video programs offer
the same benefits as iFit.com CD programs, but add
the excitement of working out with a class and an instructorÑthe hottest new trend at health clubs.

¥ Adjust the speed in small increments to
avoid sudden jumps in speed.
¥ To reduce the possibility of electric shock,
keep the console dry. Avoid spilling liquids
on the console and place only a sealed water
bottle in the water bottle holder.

With the treadmill connected to your computer, you
can also go to our new internet site at www.iFit.com
and access even more programs. Choose from a selection of basic programs that interactively control the
speed and incline of your treadmill to help you achieve
your personal exercise goals. Or, use iFit.com audio
and video programs directly from our internet site. Visit
www.iFit.com for complete details.

FEATURES OF THE CONSOLE
The treadmill console offers an impressive array of
features to help you get the most from your exercise.
When the console is in the manual mode, the speed
and incline of the treadmill can be controlled with a
touch of a button. As you exercise, the LED track and
the four displays will provide continuous exercise feedback. You can even measure your heart rate using the
built-in pulse sensor.

By adding an optional upgrade module to the treadmill,
you can use virtually endless features from our internet
site. See www.iFit.com to learn about other iFit.com
features. To purchase iFit.com CDÕs, iFit.com videocassettes, or an optional upgrade module, see your
local PROFORM dealer or call toll-free 1-800-7350768. For information about other optional accessories, see page 18.

Six certified personal trainer programs are also offered.
Each program automatically controls the speed and incline of the treadmill as it guides you through an effective workout.

To use the manual mode of the console, follow the
steps beginning on page 10. To use a personal trainer
program, see page 12. To use iFit.com CD or video
programs, refer to page 15. To use iFit.com programs directly from our internet site, see page 17.

The console also features advanced iFit.com interactive technology. IFit.com technology is like having a
personal trainer right in your home. Using the included
audio cable, you can connect the treadmill to your

exercise, change the speed of the walking belt as
desired by pressing the SPEED buttons.

STEP-BY-STEP CONSOLE OPERATION
Make sure that the on/off
switch near the power
On
cord is in the on
Position
position. Next, make sure
that the key is removed
from the console and the
power cord is properly plugged in (see HOW TO PLUG
IN THE POWER CORD on page 8).

To stop the walking belt, press the STOP button.
The TIME/INCLINE/SEG TIME display will begin
to flash. To restart the walking belt, press the
START button or the SPEED ▲ button.

To change the incline of
the treadmill, press the
INCLINE buttons. Each
time one of the buttons is
pressed, the incline will
change by 0.5%. The incline range is 1.5% to
12%. Note: When one of
the INCLINE buttons is pressed, the TIME/INCLINE/SEG TIME display will show the incline
setting for several seconds. After the buttons are
pressed, it may take a moment for the treadmill to
reach the selected incline setting.

When you are ready to begin exercising, step onto the
foot rails of the treadmill. Find the clip attached to the
key (see the drawing on page 9), and slide the clip
onto the waistband of your clothing.
To use the manual mode of the console, follow the
steps below. To use a personal trainer program, see
page 12. To use iFit.com CD or video programs,
refer to page 15. To use iFit.com programs directly
from our internet site, see page 17.
Note: The console can display speed and distance in
either miles or kilometers (see SPEED/MIN-MILE DISPLAY on page 11). For simplicity, all instructions in this
manual refer to miles.

Insert the key fully into the console.
When the key is
inserted, the four displays and various indicators on the console
will light.

DISTANCE/LAPS disArrow
playÑThis display shows
the distance that you
have walked or run and
the number of laps you
have completed (one lap
equals 1/4 mile). The display will alternate
between one number and the other every seven
seconds, as shown by the arrows in the display.

Select the manual mode.
When the key is inserted, the manual
mode will be selected
and the MANUAL indicator will light. If a program is selected, press
the PROGRAM button
repeatedly to select the manual mode.

Follow your progress with the LED track and
the four displays.
The LED TrackÑThe
LED track represents a
distance of 1/4 mile. As
you exercise, the indicators around the track will
light one at a time until
you have completed 1/4
mile. A new lap will then begin.

HOW TO USE THE MANUAL MODE

Change the incline of the treadmill as desired.

TIME/INCLINE/SEG
TIME displayÑWhen the
manual mode or an
iFit.com program is selected, this display shows
the elapsed time. When a
personal trainer program is selected, this display
shows both the time remaining in the program and
the time remaining in the current segment of the
program. The display will alternate between one
number and the other every seven seconds. Each
time the INCLINE buttons are pressed, this display
shows the current incline setting.

Press the START button or the SPEED ▲ button
to start the walking belt.
A moment after the button is pressed, the walking belt will begin to
move at 1 mph. Hold the
handrails and carefully
begin walking. As you

CALS/FAT CALS/
PULSE displayÑThis
display shows the approximate numbers of
calories and fat calories
you have burned (see
FAT BURNING on page 22). Every seven seconds, the display will change from one number to
the other, as shown by the arrows in the display.
This display will also show your heart rate when
the pulse sensor is used (see step 6 on this page).

Measure your pulse, if desired.
Stand on the
Sensors
foot rails and
place your
hands on the
metal contacts
on the pulse bar.
Your palms
must be resting
on the upper
contacts, and
your fingers must
be touching the
lower contactsÑ
avoid moving
your hands.
When your pulse
is detected, the heart-shaped indicator in the
CALS/FAT CALS/PULSE display will flash
steadily and a series of dashes (Ñ Ñ) will appear. After a few seconds, your heart rate will be
shown. For the most accurate heart rate reading, continue to hold the contacts for about 15
seconds.

SPEED/MIN-MILE
displayÑThis display
shows the speed of the
walking belt and your
current pace (pace is
measured in minutes per
mile). Every seven seconds, the display will
change from one number to the other, as shown
by the arrows in the display.
Note: The SPEED/MIN-MILE display can show
speed in either miles per hour or kilometers per
hour. To determine which unit of measurement is
selected, hold down the STOP button while inserting the key into the console. An ÒE,Ó for english
miles, or an ÒM,Ó for metric kilometers, will appear
in the display. Press the
SPEED ▲ button to
change the unit of measurement. When the desired unit of measurement is selected, remove and then reinsert the
key. Note: For simplicity, all instructions in this
manual refer to miles.

When you are finished exercising, remove the
key.
Step onto the foot rails,
press the STOP button,
and remove the key from
the console. Keep the
key in a secure place.
Note: If the displays
and various indicators on the console remain
lit after the key is removed, the console is in
the ÒdemoÓ mode. Refer to page 18 and turn off
the demo mode.

Note: To reset the displays, press the STOP button, remove the key, and then reinsert the key.

When you are finished using the treadmill, move
the on/off switch near the power cord to the off
position.

One speed setting and one incline setting are programmed for each segment. When only three seconds remain in the first segment, a series of tones
will sound and the treadmill will automatically adjust to the speed and incline settings for the second
segment.

HOW TO USE PERSONAL TRAINER PROGRAMS

Insert the key into the console.
When the key is inserted, the four displays
and various indicators
on the console will light.

The program will continue in this way until the
TIME/INCLINE/SEG TIME display counts down to
zero. The walking belt will then slow to a stop.
If the speed or incline setting for the current segment is too high or too low, you can manually
override the settings by pressing the SPEED or
INCLINE buttons on the console. However, when
the next segment begins, the treadmill will adjust to the next speed and incline settings of
the program.

Select one of the personal trainer programs.
When the
key is inserted, the
manual
mode will be
selected and
the MANUAL
indicator will
light. To select one of
the personal
trainer programs, press the PROGRAM button repeatedly until one of the six personal trainer program indicators lights.

To stop the program, press the STOP button. The
TIME/INCLINE/SEG TIME display will begin to
flash. To restart the program, press the START
button or the SPEED ▲ button. To end the program, press the STOP button, remove the key,
and then reinsert the key.

The console features two low intensity programs,
two medium intensity programs, and two high intensity programs. The profiles on the console
show how the speed and incline of the treadmill
will change during the programs. The numbers
beside the profiles show the maximum speed and
incline settings for the programs. For example, the
upper left profile shows that the treadmill will
reach a maximum speed of 4.5 mph and a maximum incline of 5% during the first program.

Follow your progress with the LED track and
the four displays.
Refer to step 5 on page 10.

Measure your pulse, if desired.
See step 6 on page 11.

When the program is completed, remove the
key from the console.
When the program has
ended, remove the key
from the console. Keep
the key in a safe place.
Note: If the displays
and indicators on the
console remain lit after the key is removed, the
console is in the ÒdemoÓ mode. Refer to page
18 and turn off the demo mode.

Press the START button or the SPEED ▲ button
to start the program.
A moment after the button is pressed, the treadmill will automatically adjust to the first speed and
incline settings for the program. Hold the handrails
and begin walking.
Each program is divided
into several time
segments of different
lengths. The TIME/
INCLINE/SEG TIME
display shows both the
time remaining in the program and the time
remaining in the current segment of the program.

When you are finished using the treadmill, move
the on/off switch near the power cord to the off
position.

HOW TO CONNECT YOUR PORTABLE STEREO

HOW TO CONNECT THE TREADMILL TO YOUR
CD PLAYER, VCR, OR COMPUTER

Note: If your stereo has an RCA-type AUDIO OUT
jack, see instruction A below. If your stereo has a
3.5mm LINE OUT jack, see instruction B. If your
stereo has only a PHONES jack, see instruction C.

To use iFit.com CDÕs, the treadmill must be connected to your portable CD player, portable stereo,
home stereo, or computer with CD player. See pages
13 and 14 for connecting instructions. To use iFit.com
videocassettes, the treadmill must be connected to
your VCR. See page 15 for connecting instructions. To
use iFit.com programs directly from our internet
site, the treadmill must be connected to your home
computer. See page 14 for connecting instructions.

A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the included adapter. Plug
the adapter into an AUDIO OUT jack on your stereo.
A

HOW TO CONNECT YOUR PORTABLE CD PLAYER

AUDIO OUT
RIGHT

Note: If your CD player has separate LINE OUT and
PHONES jacks, see instruction A below. If your CD
player has only one jack, see instruction B.

LEFT

Audio
Cable

A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the LINE OUT jack on
your CD player. Plug your headphones into the
PHONES jack.

B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the LINE OUT jack on
your stereo.

A
PHONES LINE OUT

LINE OUT

Adapter

PHONES

B
Headphones

Audio
Cable

LINE OUT

Audio
Cable
B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into a 3.5mm Y-adapter
(available at electronics stores). Plug the Y-adapter
into the PHONES jack on your CD player. Plug your
headphones into the other side of the Y-adapter.

C. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into a 3.5mm Y-adapter
(available at electronics stores). Plug the Y-adapter
into the PHONES jack on your stereo. Plug your
headphones into the other side of the Y-adapter.

B
PHONES

PHONES

Audio
Cable

3.5mm
Y-adapter

PHONES

Audio
Cable

Headphones

3.5mm
Y-adapter

Headphones

HOW TO CONNECT YOUR HOME STEREO

HOW TO CONNECT YOUR COMPUTER

Note: If your stereo has an unused LINE OUT jack,
see instruction A below. If the LINE OUT jack is
being used, see instruction B.

Note: If your computer has a 3.5mm LINE OUT jack,
see instruction A. If your computer has only a
PHONES jack, see instruction B.

A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the included adapter.
Plug the adapter into the LINE OUT jack on your
stereo.

A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the LINE OUT jack on
your computer.
A

LINE OUT

VCR
Amp

LINE OUT

Audio
Cable

LINE OUT

Audio
Cable

Adapter

B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into a 3.5mm Y-adapter
(available at electronics stores). Plug the Y-adapter
into the PHONES jack on your computer. Plug your
headphones or speakers into the other side of the
Y-adapter.

B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the included adapter.
Plug the adapter into an RCA adapter (available at
electronics stores). Next, remove the wire that is
currently plugged into the LINE OUT jack on your
stereo and plug the wire into the unused side of the
RCA adapter. Plug the RCA adapter into the LINE
OUT jack on your stereo.
B

PHONES

Audio
Cable

VCR
Amp

3.5mm
Y-adapter

LINE OUT

Headphones/Speakers

Audio
Cable

RCA
Adapter
Adapter

Wire removed from
LINE OUT jack

HOW TO CONNECT YOUR VCR

HOW TO USE IFIT.COM CD AND VIDEO
PROGRAMS

Note: If your VCR has an unused AUDIO OUT jack,
see instruction A below. If the AUDIO OUT jack is
being used, see instruction B. If you have a TV
with a built-in VCR, see instruction B. If your VCR
is connected to your home stereo, see HOW TO
CONNECT YOUR HOME STEREO on page 14.

To use iFit.com CDÕs or videocassettes, the treadmill
must be connected to your portable CD player, portable
stereo, home stereo, computer with CD player, or
VCR. See HOW TO CONNECT THE TREADMILL TO
YOUR CD PLAYER, VCR, OR COMPUTER on page
13. Note: To purchase iFit.com CDÕs or iFit.com
videocassettes, see your local PROFORM dealer or
call toll-free 1-800-735-0768.

A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the included adapter.
Plug the adapter into the AUDIO OUT jack on your
VCR.

Make sure that the on/off
switch near the power cord
On
is in the on position. In
Position
addition, make sure that the
power cord is properly
plugged in (see HOW TO
PLUG IN THE POWER CORD on page 8).

A
ANT. IN
VIDEO AUDIO
IN
RF OUT
CH
3 4
OUT

AUDIO OUT
RIGHT
LEFT

Audio
Cable

Adapter

When you are ready to begin exercising, step onto the
foot rails of the treadmill. Find the clip attached to the
key (see the drawing on page 9), and slide the clip
onto the waistband of your clothing. Follow the steps
below to use an iFit.com CD or video. Note: The instructions included in the CD case describe how to
use the CD with a variety of PROFORM treadmills.
Some instructions may not apply to this treadmill.

B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the included adapter.
Plug the adapter into an RCA adapter (available at
electronics stores). Next, remove the wire that is
currently plugged into the AUDIO OUT jack on your
VCR and plug the wire into the unused side of the
RCA adapter. Plug the RCA adapter into the AUDIO
OUT jack on your VCR.

When the key is
inserted, the four displays
and various indicators
on the console will light.

ANT. IN
VIDEO AUDIO
IN
RF OUT
CH
3 4
OUT

Press the PROGRAM button.
When the key is inserted, the manual
mode will be selected.
To use an iFit.com CD
or video program, press
the PROGRAM button.
The iFit.com indicator
will light.

RCA Adapter
Audio
Cable

Insert the key fully into the console.

Adapter

Wire removed from
AUDIO OUT jack

Insert the iFit.com CD or videocassette.
If you are using an iFit.com CD, insert the CD into
your CD player. If you are using an iFit.com videocassette, insert the videocassette into your VCR.

¥ adjust the volume of your CD player or VCR. If
the volume is too high or too low, the console
may not detect the program signals

Press the PLAY button on your CD player or
VCR.
A moment after the button is pressed, your personal trainer will begin guiding you through your
workout. Simply follow your personal trainerÕs
instructions. Note: If the TIME/INCLINE/SEG
TIME display is flashing, press the Start button or
the Speed ▲ button on the console. The treadmill
will not respond to a CD or video program when
the TIME/INCLINE/SEG TIME display is flashing.

¥ make sure that the audio cable is properly
connected, that it is fully plugged in, and that
it is not wrapped around a power cord
¥ if you are using your portable CD player and
the CD skips, set the CD player on the floor or
another flat surface instead of on the console.

During the CD or video program, an electronic
ÒchirpingÓ sound will alert you when the speed
and/or incline of the treadmill is about to change.
CAUTION: Always listen for the ÒchirpÓ and be
prepared for speed and/or incline changes. In
some instances, the speed and/or incline may
change before the personal trainer describes
the change.

If the speed or incline settings are too high or too
low, you can manually override the settings at any
time by pressing the SPEED or INCLINE buttons
on the console. However, when the next ÒchirpÓ
is heard, the speed and/or incline will change
to the next settings of the CD or video program.

Follow your progress with the LED track and
the four displays.
See step 5 on page 10.

Measure your pulse, if desired.
See step 6 on page 11.
When the iFit.com CD or video program is
finished, remove the key.
Step onto the foot rails
and remove the key from
the console. Keep the
key in a secure place.
Note: If the displays
and various indicators
on the console remain lit after the key is removed, the console is in the ÒdemoÓ mode.
Refer to page 18 and turn off the demo mode.

To stop the program at any time, press the
START/STOP button on the console. The
TIME/MIN-MILE display will begin to flash. To
restart the program, press the START/STOP button again. After a moment, the walking belt will
begin to move at 1 mph. When the next ÒchirpÓ
is heard, the speed and incline will change to
the next settings of the CD or video program.
The program can also be stopped by pressing the
STOP button on your CD player or VCR.

CAUTION: Always remove iFit.com CDÕs and
videocassettes from your CD player or VCR
when you are finished using them.
When you are finished using the treadmill, move
the on/off switch near the power cord to the off
position.

When the CD or video program is completed, the
walking belt will stop and the TIME/MIN-MILE display will begin to flash. Note: To use another CD
or video program, press the START/STOP button
or remove the key and go to step 1 on page 15.
Note: If the speed or incline of the treadmill
does not change when a ÒchirpÓ is heard:
¥ make sure that the iFit.com indicator is lit and
that the TIME/INCLINE/SEG TIME display is
not flashing. If the TIME/INCLINE/SEG TIME
display is flashing, press the Start button or
the Speed ▲ button on the console

HOW TO USE PROGRAMS DIRECTLY FROM
OUR INTERNET SITE

Read and follow the on-line instructions for using a
program.

Our new internet site at www.iFit.com allows you to
access a large selection of programs that interactively
control your treadmill to help you achieve your specific
exercise goals. In addition, you can play iFit.com audio
and video programs directly from the internet. By
adding an optional upgrade module to the console, you
can use virtually endless features on our internet site.
Explore www.iFit.com for details. To purchase an upgrade module, call toll-free 1-800-735-0768.

During the program, an electronic ÒchirpingÓ sound
will alert you when the speed and/or incline of the
treadmill is about to change. CAUTION: Always
listen for the ÒchirpÓ and be prepared for speed
and/or incline changes.
If the speed or incline settings are too high or too
low, you can manually override the settings at any
time by pressing the SPEED or INCLINE buttons
on the console. However, when the next ÒchirpÓ
is heard, the speed and/or incline will change
to the next settings of the program.

Follow the steps below to use a program from our
internet site.
Insert the key fully into the console.

To stop the program at any time, press the STOP
button on the console. The TIME/INCLINE/SEG
TIME display will begin to flash. To restart the program, press the START button. After a moment,
the walking belt will begin to move at 1.0 mph.
When the next ÒchirpÓ is heard, the speed and
incline will change to the next settings of the
program.

When the key is
inserted, the four displays and various indicators on the console
will light.
Press the PROGRAM button.

When the program is completed, the walking belt
will stop and the TIME/INCLINE/SEG TIME display
will begin to flash. Note: To use another program,
press the STOP button and go to step 5 above.

When the key is inserted, the manual
mode will be selected.
To use a program from
our internet site, press
the PROGRAM button.
The iFit.com indicator
will light.

Go to your computer and start an internet
connection.

Start your web browser, if necessary, and go to
our internet site at www.iFit.com.

Return to the treadmill and stand on the foot
rails. Find the clip attached to the key and slide
the key onto the waistband of your clothing.
When the on-screen countdown ends, the program
will begin and the walking belt will begin to move.
Hold the handrails, step onto the walking belt, and
begin walking.

Next, make sure that the
on/off switch near the
On
power cord is in the on poPosition
sition. In addition, make
sure that the power cord is
properly plugged in (see
HOW TO PLUG IN THE POWER CORD on page 8).

Follow the on-line instructions to start the
program.
When you start the program, an on-screen countdown will begin.

To use programs from our internet site, the treadmill
must be connected to your home computer. See HOW
TO CONNECT YOUR COMPUTER on page 14. In addition, you must have at least a 56K modem and an
account with an internet service provider. A list of additional system and software requirements will be found
on our internet site.

Follow the desired links on our internet site to
select a program.

Note: If the speed or incline of the treadmill
does not change when a ÒchirpÓ is heard, make
sure that the iFit.com indicator is lit and that
the TIME/INCLINE/SEG TIME display is not
flashing. In addition, make sure that the audio
cable is properly connected, that it is fully
plugged in, and that it is not wrapped around a
power cord.

Follow your progress with the LED track and
the four displays.
See step 5 on page 10.

Measure your pulse, if desired.
See step 6 on page 11.

When the program is finished, remove the
key.

Step onto the foot rails and remove the key from
the console. Keep the key in a secure place. Note:
If the displays and various indicators on the
console remain lit after the key is removed, the
console is in the ÒdemoÓ mode. Refer to the instructions at the right and turn off the demo
mode.
When you are finished using the treadmill, move
the on/off switch near the power cord to the off
position.

IMPORTANT: The CALORIES/FAT CALORIES/
PULSE display should be
blank. If a ÒdÓ appears in the
display, the console is in the
ÒdemoÓ mode. This mode is
intended to be used only
when a treadmill is displayed
in a store. When the console
is in the demo mode, the
power cord can be plugged
in, the key can be removed
from the console, and the displays and indicators on the
console will automatically light in a preset sequence,
although the buttons on the console will not operate. If a
ÒdÓ appears in the CALS./FAT CALS./PULSE display
when the information mode is selected, press the
SPEED ▼ button so the CALS./FAT CALS./PULSE
display is blank.
To exit the information mode, remove the key from the
console.
OPTIONAL CHEST PULSE SENSOR

THE INFORMATION MODE/DEMO MODE
The console features an information mode that keeps
track of the total number of hours that the treadmill has
been operated and the total number of miles that the
walking belt has moved. The information mode also
allows you to switch the console from miles per hour to
kilometers per hour. In addition, the information mode
allows you to turn on and turn off the demo mode.

An optional chest pulse sensor adds even more
features to the console. The chest pulse sensor offers
hands-free operation and continuously monitors your
heart rate during your workouts. To purchase the
optional chest pulse sensor, call the toll-free telephone number listed on the back cover of this
manual.

To select the information mode, hold down the STOP
button while inserting the key into the console. When
the information mode is selected, the following information will be shown:
The DISTANCE/LAPS
display will show the total
number of miles that the
walking belt has moved.

The TIME/INCLINE/SEG.
TIME display will show the
total number of hours the
treadmill has been used.

An ÒE,Ó for english miles, or
an ÒM,Ó for metric kilometers,
will appear in the SPEED/
MIN-MILE display. Press the
SPEED ▲ button to change
the unit of measurement.

OPTIONAL HAND WEIGHTS
Optional hand weights let
you include upper-body exercise in your workouts. The
hand weights fit into convenience holders in the console. To purchase the optional hand weights, call
the toll-free telephone
number listed on the back
cover of this manual.

HOW TO FOLD AND MOVE THE TREADMILL
HOW TO FOLD THE TREADMILL FOR STORAGE

Before folding the treadmill, adjust the incline to the
lowest position. If this is not done, the treadmill may be
permanently damaged. Next, unplug the power cord.
CAUTION: You must be able to safely lift 45 pounds (20
kg) in order to raise, lower, or move the treadmill.
1. Hold the treadmill with your hands in the locations shown
at the right. CAUTION: To decrease the possibility of injury, bend your legs and keep your back straight. As
you raise the treadmill, make sure to lift with your legs
rather than your back. Raise the treadmill about halfway
to the vertical position.
2. Move your right hand to the position shown and hold the
treadmill firmly. Using your left hand, pull the latch knob
to the left and hold it. Raise the treadmill until the latch
pin is aligned with the hole in the catch. Insert the latch
pin into the catch. Make sure that the latch pin is fully
inserted into the catch.
To protect the floor or carpet from damage, place a
mat under the treadmill. Keep the treadmill out of
direct sunlight. Do not leave the treadmill in the storage position in temperatures above 85¡ Fahrenheit.

Open

Latch
Knob

Closed

Pin
Catch

HOW TO MOVE THE TREADMILL
Before moving the treadmill, convert the treadmill to the storage position as described above. Make sure that the latch
pin is fully inserted into the catch.
1. Hold the handrails as shown and place one foot against a
wheel.
2. Tilt the treadmill back until it rolls freely on the wheels.
Carefully move the treadmill to the desired location. Never
move the treadmill without tipping it back. To reduce
the risk of injury, use extreme caution while moving
the treadmill. Do not attempt to move the treadmill
over an uneven surface.
3. Place one foot on the base, and carefully lower the treadmill until it is resting in the storage position.

Base
Wheels

HOW TO LOWER THE TREADMILL FOR USE
1. Refer to drawing 2 above. Hold the treadmill with your right hand as shown. Using your left hand, pull the latch
knob to the left and hold it. Pivot the treadmill down until the frame is past the pin. Slowly release the latch knob.
2. Refer to drawing 1. Hold the treadmill firmly with both hands, and lower the treadmill to the floor. CAUTION:
To decrease the possibility of injury, bend your legs and keep your back straight.

TROUBLE-SHOOTING
Most treadmill problems can be solved by following the simple steps below. Find the symptom that
applies, and follow the steps listed. If further assistance is needed, call our toll-free HELPLINE at
1-800-736-6879, Monday through Saturday, 7 a.m. until 7 p.m. Central Time (excluding holidays).
PROBLEM: The power does not turn on
SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor
is plugged into a properly grounded outlet (see page 7). Use only a single-outlet surge suppressor
that is UL 1449 listed as a transient voltage surge suppressor (TVSS). The surge suppressor
must have a UL suppressed voltage rating of 400 volts or less and a minimum surge dissipation
of 450 joules. The surge suppressor must be electrically rated for 120 volts AC and 15 amps.
b. After the power cord has been plugged in, make sure that the key is fully inserted into the console. See step 1 on page 10.
c. Check the circuit breaker located on the treadmill
near the power cord. If the switch protrudes as
shown, the circuit breaker has tripped. To reset the
circuit breaker, wait for five minutes and then press
the switch back in.

c
Tripped

Reset
Tripped

d. Check the on/off switch located on the treadmill
near the power cord. The switch must be in the on
position.

Reset

d
On
Position

PROBLEM: The power turns off during use
SOLUTION: a. Check the circuit breaker located on the treadmill frame near the power cord (see 1. c. above). If
the circuit breaker has tripped, wait for five minutes and then press the switch back in.
b. Make sure that the power cord is plugged in.
c. Remove the key from the console. Reinsert the key fully into the console. See step 1 on page 10.
d. Make sure that the on/off switch is in the on position.
e. If the treadmill still will not run, please call our toll-free HELPLINE.
PROBLEM: The speed display on the console does not function properly
SOLUTION: a. Remove the key from the console and unplug the
power cord. Remove the screws from the hood and
carefully remove the hood. Locate the Reed Switch
(21) and the Magnet (43) on the left side of the Pulley
(42). Turn the Pulley until the Magnet is aligned with
the Reed Switch. Make sure that the gap between
the Magnet and the Reed Switch is about 1/8Ó. If
necessary, loosen the Reed Switch Screw (76) and
move the Reed Switch slightly. Retighten the Screw.
Re-attach the hood, and run the treadmill for a few
minutes to check for a correct speed reading.

1/8Ó
76
21
Top
View

42
43

PROBLEM: The walking belt slows when walked on
SOLUTION: a. Use only a UL-listed surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less in
length.
b. If the walking belt is overtightened, treadmill performance may decrease and the walking belt may become damaged. Remove the key and UNPLUG THE
POWER CORD. Using the allen wrench, turn both
rear roller adjustment bolts counterclockwise, 1/4 of a
turn. When the walking belt is properly tightened, you
should be able to lift each side of the walking belt 3 to
4 inches off the walking platform. Be careful to keep
the walking belt centered. Plug in the power cord, insert the key and run the treadmill for a few minutes.
Repeat until the walking belt is properly tightened.

3ÓÐ4Ó

Rear Roller Adjustment Bolts

c. If the walking belt still slows when walked on, please call our toll-free HELPLINE.
PROBLEM: The walking belt is off-center
SOLUTION: a. If the walking belt has shifted to the left, first remove
the key and UNPLUG THE POWER CORD. Using the
allen wrench, turn the left rear roller adjustment bolt
clockwise, and the right bolt counterclockwise, 1/4 of a
turn each. Be careful not to overtighten the walking belt.
Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is
centered.
b. If the walking belt has shifted to the right, first remove the key and UNPLUG THE POWER CORD.
Using the allen wrench, turn the left rear roller adjustment bolt counterclockwise, and the right bolt clockwise,
1/4 of a turn each. Be careful not to overtighten the
walking belt. Plug in the power cord, insert the key and
run the treadmill for a few minutes. Repeat until the
walking belt is centered.

PROBLEM: The walking belt slips when walked on
SOLUTION: a. If the walking belt slips when walked on, first remove
the key and UNPLUG THE POWER CORD. Using the
allen wrench, turn both rear roller adjustment bolts
clockwise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able to lift each side of
the walking belt 3 to 4 inches off the walking platform.
Be careful to keep the walking belt centered. Plug in the
power cord, insert the key and carefully walk on the
treadmill for a few minutes. Repeat until the walking belt
is properly tightened.

PROBLEM: The incline of the treadmill does not change correctly or does not change when i-Fit.com
CDÕs and videos are played
SOLUTION: a. With the key inserted in the console, press one of the INCLINE buttons. While the incline is
changing, remove the key. After a few seconds, re-insert the key. The treadmill will automatically rise to the maximum incline level and then return to the minimum level. This will recalibrate
the incline.

CONDITIONING GUIDELINES
uses easily accessible carbohydrate calories for energy. Only after the first few minutes does your body
begin to use stored fat calories for energy. If your goal
is to burn fat, adjust the speed and incline of the treadmill until your heart rate is near the lowest number in
your training zone.

WARNING:

Before beginning this
or any exercise program, consult your physician. This is especially important for individuals over the age of 35 or individuals with preexisting health problems.

For maximum fat burning, adjust the speed and incline
of the treadmill until your heart rate is near the middle
number in your training zone.

The pulse sensor is not a medical device.
Various factors, including your movement,
may affect the accuracy of heart rate readings.
The sensor is intended only as an exercise aid
in determining heart rate trends in general.

Aerobic Exercise
If your goal is to strengthen your cardiovascular system, your exercise must be Òaerobic.Ó Aerobic exercise
is activity that requires large amounts of oxygen for
prolonged periods of time. This increases the demand
on the heart to pump blood to the muscles, and on the
lungs to oxygenate the blood. For aerobic exercise,
adjust the speed and incline of the treadmill until your
heart rate is near the highest number in your training
zone.

The following guidelines will help you to plan your exercise program. RememberÑthese are general guidelines only. For more detailed exercise information, obtain a reputable book or consult your physician.
EXERCISE INTENSITY
Whether your goal is to burn fat or to strengthen your
cardiovascular system, the key to achieving the
desired results is to exercise with the proper intensity.
The proper intensity level can be found by using your
heart rate as a guide. The chart below shows recommended heart rates for fat burning and aerobic exercise.

WORKOUT GUIDELINES
Each workout should include the following three parts:
A Warm-upÑStart each workout with 5 to 10 minutes
of stretching and light exercise. A proper warm-up increases your body temperature, heart rate and circulation in preparation for exercise.
Training Zone ExerciseÑAfter warming up, increase
the intensity of your exercise until your pulse is in your
training zone for 20 to 60 minutes. (During the first few
weeks of your exercise program, do not keep your
pulse in your training zone for longer than 20 minutes.)
Breathe regularly and deeply as you exerciseÑnever
hold your breath.

To find the proper heart rate for you, first find your age
near the bottom of the chart (ages are rounded off to
the nearest ten years). Next, find the three numbers
above your age. The three numbers define your Òtraining zone.Ó The lower two numbers are recommended
heart rates for fat burning; the higher number is the
recommended heart rate for aerobic exercise.

A Cool-downÑFinish each workout with 5 to 10 minutes of stretching to cool down. This will increase the
flexibility of your muscles and will help prevent post-exercise problems.

To measure your heart rate during exercise, use the
pulse sensor on the console. If your heart rate is too
high or too low, adjust the speed and incline of the
treadmill.

Exercise Frequency
To maintain or improve your condition, complete three
workouts each week, with at least one day of rest between workouts. After a few months, you may complete up to five workouts each week if desired.

Fat Burning
To burn fat effectively, you must exercise at a relatively
low intensity level for a sustained period of time.
During the first few minutes of exercise, your body

The key to success is to make exercise a regular and
enjoyable part of your everyday life.

PART LISTÑModel No. 831.299260

R0400A

To locate the parts listed below, refer to the EXPLODED DRAWING attached in the center of this manual.
Key
No. Qty.
1
2
3
4*

1
1
4
1

5
6

1
1

7
8
9
10**
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30

1
1
5
1
1
1
1
1
8
4
4
2
1
2
1
1
1
1
1
1
1
1
1
8

31
32
33
34
35
36
37

1
2
2
1
1
3
2

38
39
40
41
42
43
44
45
46

4
6
1
2
1
1
2
2
10

Description

Key
No. Qty.

Description

Motor Belt
Pulley/Flywheel/Fan
Motor Nut
Motor/Pulley/
Flywheel/ Fan
Incline Motor Bolt
Plastic Incline Motor
Spacer
Incline Motor
Stop Bracket
Base Pad Spacer
Hand Weight Set
Rear Foot Spacer
Frame
Optic Switch Bolt
Incline Motor Pivot Bolt
Incline Motor Nut
Hood Screw
Plastic Stand-Off
Hood Bracket (short)
Hood Bracket (long)
Warning Decal
Reed Switch
Reed Switch Clip
Motor/Controller Wire
Controller
Electronics Bracket
Circuit Breaker
Power Cord
Power Cord Grommet
On/Off Switch
Hood Bracket Screw/
Incline Shield Screw
Incline Leg
Frame Pivot Bolt
Frame Pivot Spacer
Upright Wire Harness
Front Roller Adj. Bolt
Roller Adj. Washer
Motor Tension Nut/
Front Roller Nut
Motor Bolt
Cap Screw
Left Foot Rail Cap
Foot Rail
Front Roller/Pulley
Magnet
Platform Screw (mid)
Isolator
Isolator Screw

47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96

Plastic Fastener
Shield
Belt Guide
Book Holder
Front Belly Pan
Power Supply
Cable Tie Clamp
Cable Tie
Walking Belt
24Ó Reed Harness
Rear Roller
Belly Pan Spacer
Rear Foot
Rear Foot Screw
Ground Wire
Ground Wire Screw
Belly Pan
Rear Endcap
Rear Roller Adj. Bolt
Motor
Latch Decal
Platform Screw
Electronics Screw
Latch Catch
Walking Platform
8Ó Cable Tie
Jack
Motor Tension Bolt
Foot Rail Insert
Screw
Console
Metal Incline Spacer
Long Screw
10Õ iFit Wire
Motor Star Washer
Upright
Incline Leg Pivot Bolt
50Ó Wire Harness
Handrail Extension
Wheel Bolt
Console Base
Motor Tension Washer
Console/Catch Screw
Key/Clip
Incline Motor Plate
Right Foot Rail Cap
Motor Tension Spacer
Motor Hood
Front Wheel
Incline Motor Shield

15
1
2
1
1
1
4
4
1
1
1
1
2
2
1
5
1
1
2
1
1
4
6
1
1
5
1
1
2
8
1
1
4
1
4
1
2
1
2
2
1
1
10
1
1
1
1
1
2
1

Key
No. Qty.
97
98
99
100
101
102
103
104*
105
106
107
108
109
110
111
112
113
114
115
116
117
118**
119
120*

7
1
1
1
14
1
2
2
1
1
2
2
1
2
1
1
1
1
1
1
2
1
1
2

121
#
#
#
#
#
#
#
#
#
#
#

2
1
1
1
1
1
1
1
1
1
1
1

Description
Base Pad
12Ó Audio Wire
Upright Grommet
Allen Wrench
Base Pad Screw
Lock Knob
Extension Leg
Base Endcap
Shock
Choke
Pulse Bar Bolt
Pulse Bar Washer
Pulse Bar
Handrail Foam Grip
Lock Knob Sleeve
Spring
Lock Pin Collar
Pin Clip
Lock Pin
Console Base Bottom
Upright Endcap
Chest Pulse Sensor
iFit CD
Extension Leg
Assembly
Static Decal
25Ó Wire Harness
8Ó White Wire, 2F
4Ó White Wire, M/F
8Ó Blue Wire, 2F
4Ó Blue Wire, 2F
4Ó Black Wire, 2F
4Ó Green Wire, F/Ring
8Ó Green Wire, F/Ring
8Ó Green Wire, 2 Ring
4Ó Red Wire, M/F
User's Manual

* Includes all parts shown in the
box
**For more information about the
optional hand weight set or chest
pulse sensor, see page 18
# These parts are not illustrated

100

62
61

EXPLODED DRAWINGÑModel No. 831.299260

106

101

15 30

R0400A

101

88
48

31
30

62 29

28
26

101

120*

110

118**

10**

103

108

101

102

107

120*

101

105

97
30

101

111

112

103

114

113

117

104

115

101

110

109

101

117

108

107

101

EXPLODED DRAWINGÑModel No. 831.299260

101

104

119

R0400A

116

121

The model number and serial number of your PROFORM¨ 735CS
treadmill are listed on a decal attached to the frame. See the front
cover of this manual to find the location of the decal.

Model No. 831.299260

QUESTIONS?

All replacement parts are available for immediate purchase or
special order when you visit your nearest SEARS Service Center.
To request service or to order parts by telephone, call the toll-free
numbers listed at the left.

If you find that:
¥ you need help assembling or
operating the PROFORM
735CS treadmill
¥ a part is missing

When requesting help or service, or ordering parts, please be
prepared to provide the following information:
¥ The NAME OF THE PRODUCT (PROFORM¨ 735CS treadmill)

¥ or you need to schedule repair
service
call our toll-free HELPLINE

1-800-736-6879
MondayÐSaturday, 7 amÐ7 pm
Central Time (excluding holidays)

¥ The MODEL NUMBER OF THE PRODUCT (831.299260)
¥ The KEY NUMBER AND DESCRIPTION OF THE PART (see the
EXPLODED DRAWING in the center of this manual and the
PART LIST on page 23).

REPLACEMENT
PARTS
If parts become worn and need
to be replaced, call the following
toll-free number

1-800-FON-PART
(1-800-366-7278)

FULL 90 DAY WARRANTY
For 90 days from the date of purchase, if failure occurs due to defect in material or workmanship in this
SEARS TREADMILL EXERCISER, contact the nearest SEARS Service Center throughout the United
States and SEARS will repair or replace the TREADMILL EXERCISER, free of charge.
This warranty does not apply when the TREADMILL EXERCISER is used commercially or for rental purposes.
This warranty gives you specific legal rights, and you may also have other rights which vary from state
to state.
SEARS, ROEBUCK AND CO., DEPT. 817WA, HOFFMAN ESTATES, IL 60179

Part No. 163772 R0400A

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 26
Create Date                     : 2000:12:07 12:32:33
Producer                        : Acrobat Distiller 3.02 for Power Macintosh
Author                          : Steve Slade
Creator                         : QuarkXPressª: PSPrinter 8.3.1
Title                           : *299260-163772

EXIF Metadata provided by EXIF.tools

Proform 299260 735Cs Treadmill Users Manual *299260 163772

Proform-299260-Owner-S-Manual proform-299260-owner-s-manual

831.299260 to the manual 6ab35390-775e-4a3a-b281-d2ac52e2597a

Navigation menu

Versions of this User Manual:

Views

Navigation